trinityboringsolutions.com

Keller Texas Directional Boring: Crosstell Soil, US 377 And Big Bear Creek

Quick Answer: Along Keller’s Union Pacific tracks and US 377, Trinity Boring Solutions handles directional boring, also called horizontal directional drilling (HDD), for utility routes in Texas. Yukon is 203 road miles away, and a bore near Bear Creek Parkway is staffed by our own crews or vetted partner crews from satellite yards. The USDA soil survey maps clay beneath Keller, and that sticky ground can grip pipe and build up on a reamer. Staged reaming can help prepare a route near Big Bear Creek for the pipe pull.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Keller bores at a glance

  • Incorporated city in Tarrant County, Texas. Population 46,643 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 203 miles, about 4.1 hours of driving.
  • Ground: Crosstell soil is mapped on 18 percent of the area, with clay about 40 inches down.
  • Rock: bedrock is mapped within 60 inches on 27 percent of the area.
  • Highways inside the boundary: US 377, FM 1709 and FM 1938. State permit office: TxDOT Fort Worth District.
  • Railroad track inside the boundary: Union Pacific, with 2 mapped street and rail crossings.
  • Named streams inside the boundary: Big Bear Creek, Little Bear Creek and Marshall Branch.
  • Public water: City of Keller, surface water bought from another system.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Which contractor handles Keller directional boring near US 377?

Keller, in Tarrant County, has 46,643 residents in the Census Bureau Vintage 2024 estimate, and we take directional boring work there for water, sewer, gas, electric conduit and fiber. Those lines can run beneath Keller Smithfield Road or serve properties along FM 1709, where a bore can pass under pavement rather than cut across it.

Our main office is in Yukon, Oklahoma, and Keller work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. We have gone more than 25 years without a utility strike, a record that matters around the City of Keller water system and electric lines reported in Tarrant County. Our family company began in 1965 and has drilled directionally since 1982, with Trinity handling Keller work from the first call through the bore log.

Aerial view of Trinity Boring Solutions crew and service van at a multifamily apartment underground utility jobsite in Oklahoma City
Our crew and service van at a multifamily underground utility job in Oklahoma City, seen from above. Photos on this page are from our jobs in Oklahoma and Texas.

What does Crosstell soil mean for a bore in Keller?

The USDA soil survey maps Crosstell across 18 percent of Keller, including Crosstell fine sandy loam map units with 1 to 3 percent and 3 to 8 percent slopes. At about 40 inches below the surface, clay is mapped across 44 percent of the area, while sandy clay loam accounts for 26 percent. We treat Keller’s mapped soil patterns as planning guidance, not test borings, before setting a boring profile. Clay can hold an open hole but become sticky on the reamer, so a bore may need staged reaming and a prompt pipe pull.

USDA soil survey, inside the Keller city limitsWhat is mapped
Soil series mappedCrosstell 18 percent, Gasil 16 percent, Rader 9 percent, Silstid 8 percent and Birome 8 percent
Texture at the surfacefine sandy loam 48 percent, clay loam 24 percent and clay 10 percent
Texture about 40 inches downclay 44 percent, sandy clay loam 26 percent and sandy clay 9 percent
Engineering class about 40 inches downfat clay (CH) 52 percent, lean clay (CL) 29 percent and clayey sand (SC) 8 percent
Average clay content about 40 inches down40 percent
Bedrock mapped within 60 inches27 percent of the area (0 percent hard rock, 27 percent weathered rock)
Seasonal water table within 60 inches9 percent of the area
Flood prone soils4 percent of the area
High corrosion risk for uncoated steel68 percent of the area
Mapped as urban land (disturbed fill)2 percent of the area

The USDA soil survey maps bedrock within 60 inches across 27 percent of Keller, with a typical depth of 43 inches; the map identifies the material as weathered bedrock. The local geology unit is Grayson Marl and Main Street Limestone, undivided, of Cretaceous age, so a route may slow where soil meets rock. Seasonal water table conditions are mapped within 60 inches across 9 percent, and flood prone soils across 4 percent, making pit placement and creek depth worth planning. Across Keller, mapped high steel corrosion risk covers 68 percent, so we select casing and tracer wire materials with that exposure in mind.

How do we run a Keller bore through clay?

For Keller’s clay mapped at about 40 inches, we control fluid and reamer buildup instead of forcing a fast pull. Big Bear Creek and nearby pavement also shape the route and pit locations.

  1. On Keller routes with sticky clay mapped at depth, we use a thinner drilling fluid and polymer, then open the hole in stages to limit reamer buildup.
  2. Where clay may grip the pipe near Keller Smithfield Road, we plan the pull so the pipe is ready when the final ream is complete.
  3. At Big Bear Creek, we plan the bore depth beneath the channel and locate pits on the banks without cutting the creek crossing.
  4. Before drilling near a marked line along US 377, we hydrovac expose it and track the drill head with a walkover locator.
Trinity Boring Solutions water trailer supplying water for bentonite drilling fluid on a sleeve bore in northeast OKC
Our water trailer feeding the bentonite drilling fluid mix on a sleeve bore in northeast Oklahoma City.

Where might a Keller line pass beneath Union Pacific tracks?

A Keller bore can pass beneath US 377, FM 1709 or FM 1938, while Texas State Highway 170 and Texas State Highway 114 are close outside the city limits. TxDOT rules call for boring or tunneling beneath existing highway pavement, so a crossing route must be planned below the road rather than cut through it. Keller’s longest named streets include Main Street, Bear Creek Parkway and Keller Smithfield Road. Their pavement and nearby driveways can make a bore a useful way to keep the surface intact.

CrossingTypeMapped extentWho has a say
US 377US highway7.5 roadway miles insideState highway office
FM 1709State highway3 roadway miles insideState highway office
FM 1938State highway1.7 roadway miles insideState highway office
Texas State Highway 170Highway nearby0.7 miles outsideState highway office
Texas State Highway 114Highway nearby1.3 miles outsideState highway office
Union PacificRailroad2.45 track miles insideThe railroad
Big Bear CreekStream7.1 channel miles insideChecked for Corps of Engineers jurisdiction
Little Bear CreekStream1.65 channel miles insideChecked for Corps of Engineers jurisdiction
Marshall BranchStream1.18 channel miles insideChecked for Corps of Engineers jurisdiction
Higgins BranchStream nearby0.2 miles outsideChecked for Corps of Engineers jurisdiction
Kirkwood BranchStream nearby0.3 miles outsideChecked for Corps of Engineers jurisdiction
Calloway BranchStream nearby0.5 miles outsideChecked for Corps of Engineers jurisdiction
Turner LakeLake or pond37 acres, nearbyChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

Union Pacific has 2.45 track miles in Keller, and public mapping shows 2 street and rail crossings in the city. A track route needs the railroad owner’s crossing agreement. Big Bear Creek runs 7.1 channel miles in Keller, while Little Bear Creek runs 1.65 and Marshall Branch 1.18; mapping also shows 20 street crossings of named streams. Turner Lake is within one mile outside city limits, so a nearby water route needs planning for the specific crossing.

Who approves a Keller bore on roads in Tarrant County?

Keller city streets such as Main Street belong to the city, while a bore on US 377, FM 1709 or FM 1938 right of way needs a TxDOT utility permit. The TxDOT Fort Worth District reviews that application, which the utility that owns the line submits through RULIS; we prepare the bore plan and profile for the owner. TxDOT sets cover requirements, including 60 inches below the lowest crossed grade for electric and communication crossings and 60 inches for water crossings. A Union Pacific route also needs an agreement with the railroad, and a Big Bear Creek crossing is checked for U.S. Army Corps of Engineers jurisdiction during planning.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Whose lines are near the City of Keller water system?

The City of Keller public water system uses purchased surface water and lists 15,815 service connections serving 46,308 people. For a conduit route near Keller Smithfield Road, electric service reporting in Tarrant County includes Oncor Electric Delivery Company, Denton County Electric Cooperative, Tri-County Electric Cooperative and United Electric Cooperative Service. We confirm the line owner for the address before planning an electric conduit bore, since those county reports do not identify the provider at every location.

Line ownerWhat it isSourceSize
City of KellerPublic water systemSurface water bought from another system15,815 connections, 46,308 people served
Oncor Electric Delivery Company, Denton County Electric Cooperative, Tri-County Electric Cooperative and United Electric Cooperative ServiceElectric utilities reporting service in Tarrant CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put Keller’s median housing year at 1999; 1 percent of homes were built before 1960, 52 percent from 1960 to 1999 and 47 percent in 2000 or later. Along Bear Creek Parkway, a replacement route may meet older buried lines as well as newer service runs. We hydrovac pothole each marked utility on the route before the drill gets close; for example, a line planned beneath Keller Smithfield Road needs its marked crossings exposed because paint shows position, not depth.

Mini excavator digging beside a pad mounted electrical transformer with red dirt spoil and a vacuum excavation trailer on site
Digging beside a pad mounted electric transformer with a vacuum excavation trailer on site.

Where is Keller in relation to Westlake and Yukon?

Keller is an incorporated city in Tarrant County, at an elevation of 651 feet and covering 18.35 square miles. For Keller work, we use ZIP codes 76248 and 76262 to confirm the project area before planning underground boring access. Westlake is 3.8 miles north, Watauga is 4.5 miles south and Southlake is 4.6 miles east; Fort Worth is 12.7 miles southwest and is both the county seat and the nearest larger city listed. From our Yukon, Oklahoma yard, Keller is 203 road miles away and a 4.1 hour drive, which matters when we plan mobilization for a Keller bore.

Places near Keller

What kinds of bores fit Keller near Bear Creek Parkway?

  • Highway crossing: A route beneath US 377 or FM 1709 can keep the existing pavement uncut while carrying a utility line across the road.
  • Water service: A connection near the City of Keller system can use a bore to reach a property without trenching across a driveway on Main Street.
  • Fiber route: Conduit along Bear Creek Parkway can pass beneath sidewalks and pavement, with marked utilities exposed before drilling near them.
  • Creek crossing: A line beneath Big Bear Creek needs a planned depth under the channel and review for possible federal jurisdiction.
  • Rail crossing: A route beneath the Union Pacific track needs the railroad owner’s agreement and crossing conditions set before the bore.
  • Replacement service: A bore near Keller Smithfield Road can route a new water or sewer line around surface pavement and existing utilities.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What drives the price of a Keller bore near Main Street?

For a Keller quote, send the address or map pin, what needs to go in the ground, its pipe or conduit size and the planned footage. A sketch or plans help us see how the route relates to Main Street, a driveway or a nearby utility crossing. Those details let us judge the bore path before discussing the work.

In Keller, clay and the chance of weathered bedrock can affect drilling time and reaming, so ground conditions are an early pricing factor. The number of utilities to expose, pavement near Main Street, and a crossing at Union Pacific tracks or Big Bear Creek also shape the work. Pit size, excavator time and sand backfill matter, as do high profile or emergency needs. Mobilization reflects the 203 road miles from Yukon.

Questions people ask about boring in Keller

Does Trinity Boring Solutions take directional boring jobs in Tarrant County’s Keller?

Yes, we take directional boring work in Keller, and our crews or vetted partner contractors staff the job from satellite yards. The City of Keller water system and routes near US 377 are examples of local infrastructure a bore may need to work around. Trinity remains your contact from the initial call through the bore log.

Who owns electric lines in Tarrant County near Keller, and who confirms conduit specs?

Electric service reporters for Tarrant County include Oncor Electric Delivery Company, Denton County Electric Cooperative, Tri-County Electric Cooperative and United Electric Cooperative Service. For a Keller conduit bore near FM 1709, we confirm the specific line owner first, then coordinate conduit requirements with that owner rather than assuming one provider serves every address.

Do Keller Smithfield Road streets belong to the city, and can a bore avoid cutting them?

Keller is incorporated, so Keller Smithfield Road is a city street. A directional bore can pass below pavement instead of opening a trench across the street, subject to the route and site conditions. We still need marked utilities exposed before drilling near them, since surface marks do not show their depth.

What do Keller homes near Bear Creek Parkway mean for replacement bores?

Keller’s median housing year is 1999, and the American Community Survey estimates that 52 percent of homes date from 1960 to 1999. A replacement bore near Bear Creek Parkway may encounter existing lines as well as newer services. We plan to expose marked utilities before the drill approaches them.

Does Crosstell soil in Keller create steel corrosion concerns, and what pipe is used?

The USDA soil survey maps high steel corrosion risk across 68 percent of Keller, so the line owner should consider casing and tracer wire materials. Crosstell is one of the mapped soil series, but the specific pipe material depends on the line design. HDPE does not have the same soil corrosion concern as uncoated steel.

What ground does a Keller bore encounter in Crosstell soil around 40 inches down?

The USDA soil survey maps clay at about 40 inches below the surface across 44 percent of Keller and sandy clay loam across 26 percent. Crosstell covers 18 percent of the city. Clay can stay in an open hole but stick to the reamer, so staged reaming can help prepare the route.

Can I reach Trinity after hours about an urgent Keller Smithfield Road bore?

Yes, a person answers Trinity’s phone 24 hours a day at (405) 409-7423. If an urgent bore near Keller Smithfield Road involves a marked utility or pavement issue, tell us the location and what line needs to go in so we can discuss the job.

How early should I call Texas811 for a Keller bore near Main Street, and what if marks move?

For a Keller bore near Main Street, request a Texas811 locate at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days ahead. If the start slips more than 14 days after the original notice, make a new request. Before work resumes on a Keller bore, we have worn or moved marks refreshed through Texas811.

What affects directional boring costs in Keller near US 377?

The Keller job scope determines the price: clay or weathered bedrock, bore length and pipe size all matter. Crossings of US 377, Union Pacific tracks or utilities can add exposure and planning work, while pavement, creek crossings and pits affect the setup. We account for 203 road miles from Yukon when planning mobilization for directional boring work in Keller.

Where the Keller facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Keller

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Keller, Texas

Type the address of your job in Keller. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Keller

Same county: Arlington · Grand Prairie · Mansfield · Euless · Grapevine · Bedford · Haltom City · Hurst · Saginaw · Colleyville · Benbrook · Crowley. All counties: Texas county list.