trinityboringsolutions.com

Pleasant Hill Texas Directional Boring: Colita Soil, US 287 and Ruby Creek

Quick Answer: Pleasant Hill’s fine sandy loam mixes with clay in the mapped soils, so our directional boring, also called horizontal directional drilling (HDD), can pass under US 287 without cutting pavement. Ruby Creek needs depth planning where a route crosses its channel. Pleasant Hill is 415 road miles from our Yukon, Oklahoma main office, with FM 352 access shaping mobilization. Colita soil maps at 24 percent, and sandy ground can cave behind the bit.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Pleasant Hill bores at a glance

  • Unincorporated community in Polk County, Texas. Population 610 (2020 Census count).
  • Road distance from our Yukon, Oklahoma main office: 415 miles, about 8.5 hours of driving.
  • Ground: Colita soil is mapped on 24 percent of the area, with fine sandy loam about 40 inches down.
  • Rock: bedrock is mapped within 60 inches on 70 percent of the area.
  • Highways inside the boundary: US 287 and FM 352. State permit office: TxDOT Lufkin District.
  • Railroad track inside the boundary: none mapped.
  • Named streams inside the boundary: Ruby Creek and Bear Creek.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Which contractor handles directional boring near Princess Drive in Pleasant Hill?

Trinity Boring Solutions takes directional boring work in Pleasant Hill, Polk County, where the Census Bureau counted 610 residents in the 2020 Census. We install water, sewer, gas, electric conduit and fiber for routes beneath streets such as Princess Drive and Corrigan Heights or across US 287, with the line and route set by the job.

Our main office is in Yukon, Oklahoma, and Pleasant Hill work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our 3/4 inch service line work through 48 inch casing and bores from 10 feet to 5,000 feet can suit a Princess Drive service or a longer Ruby Creek crossing; our family business began in 1965, with directional boring since 1982.

Aerial view of a bore pit with drill rig and conduit alongside a directional drill rig and conduit on a concrete lot
Our crew at a bore pit beside the directional drill on a conduit job, seen from above. Photos on this page are from our jobs in Oklahoma and Texas.

What kind of ground does Colita soil mean for a Pleasant Hill bore?

Pleasant Hill’s USDA soil survey maps Colita as the leading series at 24 percent, followed by Rayburn at 21 percent and Diboll at 20 percent. Surface texture is fine sandy loam across 62 percent and very fine sandy loam across 20 percent. About 40 inches down, the leading texture is fine sandy loam at 30 percent, with sandy clay loam at 24 percent and clay at 21 percent. These are mapped patterns, not test borings; the changing sand and clay mix can affect steering, fluid returns and how the hole holds.

USDA soil survey, inside the Pleasant Hill mapped community boundaryWhat is mapped
Soil series mappedColita 24 percent, Rayburn 21 percent, Diboll 20 percent, Hatliff 17 percent and Laska 12 percent
Texture at the surfacefine sandy loam 62 percent, very fine sandy loam 20 percent and loam 17 percent
Texture about 40 inches downfine sandy loam 30 percent, sandy clay loam 24 percent and clay 21 percent
Engineering class about 40 inches downclayey sand (SC) 24 percent, fat clay (CH) 21 percent and lean clay (CL) 20 percent
Average clay content about 40 inches down28 percent
Bedrock mapped within 60 inches70 percent of the area (0 percent hard rock, 70 percent weathered rock)
Seasonal water table within 60 inches82 percent of the area
Flood prone soils17 percent of the area
High corrosion risk for uncoated steel82 percent of the area

The soil data map weathered bedrock within 60 inches across 70 percent of Pleasant Hill, with typical bedrock depth at 46 inches; hard bedrock is mapped in none of that depth range. A seasonal water table is mapped within 60 inches across 82 percent, so pits may need pumping. Flood prone soils cover 17 percent, especially relevant near Ruby Creek. With Colita soils in Pleasant Hill, we account for the mapped 82 percent steel corrosion risk when planning underground work. The Whitsett Formation, of Priabonian age, includes clay, sandstone and siltstone, so ground conditions can change along a bore.

How do we drill Pleasant Hill’s fine sandy loam?

For a Pleasant Hill bore through fine sandy loam and clay mixes, we match fluid and reaming to the route rather than treating the map as a site test; Ruby Creek and wet ground call for added planning.

  1. Colita and fine sandy loam: We use staged reaming and maintain bore fluid to support loose material, with pipe ready before the final pass where ground can slough.
  2. Clay at depth: Where the USDA map shows clay at about 40 inches, thinner fluid and polymer can limit sticky cuttings; we pull pipe promptly after opening the hole.
  3. Ruby Creek: We plan depth below the channel and check Corps jurisdiction during planning; wetter, flood prone ground can change pit and crossing layout.
  4. Princess Drive: We hydrovac pothole each marked utility on route, then use a surface locator to track the drill head and record depth and pitch; paint alone does not show depth.
Rock bit on the drill rod at the front of a Vermeer D24x40 S3 with broken sandstone at the entry of a rock bore in Guthrie, OK
Rock bit on the drill rod with broken sandstone at the entry of a rock bore in Guthrie, Oklahoma.

Where might a line go under US 287 in Pleasant Hill?

Pleasant Hill has US 287 and FM 352 inside the mapped community boundary, while US 59 lies 1.0 miles outside it. A route may also pass beneath Princess Drive, the longest named street at 0.96 miles, or Princess Avenue at 0.86 miles and Corrigan Heights at 0.73 miles. Boring can keep pavement and driveways intact, but each crossing needs its own alignment and clearance plan; the US 287 right of way may bring TxDOT requirements.

CrossingTypeMapped extentWho has a say
US 287US highway0.6 roadway miles insideState highway office
FM 352State highway1.2 roadway miles insideState highway office
US 59Highway nearby1 miles outsideState highway office
Ruby CreekStream3.16 channel miles insideChecked for Corps of Engineers jurisdiction
Bear CreekStream0.51 channel miles insideChecked for Corps of Engineers jurisdiction
Dry CreekStream nearby0.6 miles outsideChecked for Corps of Engineers jurisdiction
Jones CreekStream nearby0.7 miles outsideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

No railroad is mapped inside Pleasant Hill or within one mile, so no local track crossing appears in the mapped network. Ruby Creek runs 3.16 channel miles in the community and Bear Creek 0.51 miles; five mapped street crossings intersect named streams. A route near either creek needs channel depth planning, and water crossing plans are checked for U.S. Army Corps of Engineers jurisdiction. For Pleasant Hill crossings of US 287, we account for the map showing no lakes or ponds within one mile.

Do I need a permit for a Pleasant Hill bore in Polk County?

Pleasant Hill is an unincorporated census designated place, so it has no city government; street and permit authority rests with Polk County or the state, depending on the road. US 287 and FM 352 are state routes: the line owner applies for a TxDOT utility permit through RULIS, reviewed by the TxDOT Lufkin District, while we prepare the bore plan and profile and work under that owner’s permit. Under US 287 pavement, TxDOT requires boring or tunneling, encasement and a bore beneath all travel lanes on rural highways. A Ruby Creek crossing is checked for Corps jurisdiction.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Who owns the lines in Pleasant Hill, Polk County?

EPA drinking water records do not identify a provider tied to Pleasant Hill, and no named system can be matched to a specific address. Before planning a bore on Princess Drive, confirm that address’s water provider with Polk County or the local water district. Entergy Texas and Sam Houston Electric Cooperative report electric service in Polk County; neither report identifies the owner of every line, so confirm the line owner and conduit specifications before an electric bore.

Line ownerWhat it isSourceSize
Entergy Texas and Sam Houston Electric CooperativeElectric utilities reporting service in Polk CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

ACS 2019 to 2023 five year estimates put Pleasant Hill’s median housing year at 1993: 23 percent of homes predate 1960, 50 percent date from 1960 to 1999, and 27 percent were built in 2000 or later. A route along Princess Avenue may serve an older replacement or a newer service, so we expose every marked line by hydrovac before the drill approaches; paint shows position, not depth.

Yellow polyethylene gas pipe pulled through a directional bore beside a commercial building
Yellow polyethylene gas pipe pulled through a directional bore beside a commercial building.

What is near Pleasant Hill and Corrigan?

Pleasant Hill is in Polk County at elevation 211 feet, covers 2.65 square miles and uses ZIP code 75939. Corrigan is 2.1 miles west; Seven Oaks is 11.1 miles south, and Chester is 12.7 miles southeast. Diboll, the nearest larger city, is 12.9 miles north, while Livingston, the county seat, is 22.0 miles southwest. The community is 415 road miles and an 8.5 hour drive from our Yukon yard, so distance is part of planning a job near US 287.

Places near Pleasant Hill

What kinds of bores may come up near Corrigan Heights in Pleasant Hill?

  • Highway crossing: A bore beneath US 287 keeps the pavement intact and needs a route planned for the highway right of way.
  • Water service: A service near Princess Drive needs the address specific water provider confirmed before its bore route is set.
  • Creek crossing: A Ruby Creek bore needs channel depth planning and a check for U.S. Army Corps of Engineers jurisdiction.
  • Fiber drop: A fiber route along Corrigan Heights can be bored beneath the street rather than opened through its surface.
  • Electric conduit: Near FM 352, we confirm the line owner and conduit specifications before planning a route past marked utilities.
  • Sewer line: A sewer route near Princess Avenue can be planned around marked lines and the area’s mapped wet soils.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What drives the price of a Pleasant Hill bore near Ruby Creek?

For a bore near Ruby Creek, send the address or map pin, what is going in the ground, the pipe or conduit size and footage; a sketch or plans help. The route’s relation to the creek matters because channel depth, wet ground and access for pits can shape the crossing plan.

The job details set the price, starting with the 415 road miles from Yukon and the access route near US 287 or FM 352. Colita soil and the mapped mix of fine sandy loam and clay can affect drilling and fluid handling. Other factors include pipe size, bore length, utility crossings and exposures, pavement, creek or drainage crossings, pits, excavator time, sand backfill and emergency timing.

Questions people ask about boring in Pleasant Hill

Does Trinity take boring jobs in Pleasant Hill, Polk County, and how are crews assigned?

We take directional boring work in Pleasant Hill, Polk County. Our own crews handle jobs, and vetted partner contractors can work from satellite yards; you work with Trinity from the first call through the bore log. A route near Princess Drive or US 287 is planned for its specific access and crossings.

What ground should I expect for a Pleasant Hill bore through Colita soil?

The USDA soil survey maps Colita across 24 percent of Pleasant Hill, with fine sandy loam as the leading surface texture. About 40 inches down, fine sandy loam is mapped across 30 percent, sandy clay loam across 24 percent and clay across 21 percent. On Princess Drive in Pleasant Hill, we treat these mapped patterns as screening information, not as test borings for the crossing.

Will a Pleasant Hill bore encounter rock near Ruby Creek?

It may. The soil data map weathered bedrock within 60 inches across 70 percent of Pleasant Hill, with typical depth at 46 inches. Hard bedrock is mapped in none of that depth range, but conditions can vary along a route near Ruby Creek, so the bore plan must account for the ground encountered.

Who approves a Pleasant Hill bore under US 287, and which state office reviews it?

The utility owner applies for the TxDOT permit for work in the US 287 right of way through RULIS. The TxDOT Lufkin District reviews it. We prepare the bore plan and profile and work under the permit issued to the line owner; highway pavement is bored or tunneled, not open trenched.

Can a line be bored under Ruby Creek in Pleasant Hill?

A Ruby Creek crossing can be planned as a bore, with depth set to stay under the channel. For a Ruby Creek crossing in Pleasant Hill, we check US Army Corps of Engineers jurisdiction during planning. The stream runs 3.16 channel miles inside the Pleasant Hill community, so the route and crossing conditions matter.

Which company owns electric lines in Pleasant Hill, Polk County, and who confirms conduit specs?

Entergy Texas and Sam Houston Electric Cooperative report electric service in Polk County, but that does not identify the line owner at every Pleasant Hill address. The owner must be confirmed before a conduit bore, and conduit specifications should be confirmed with that owner for the route near Princess Drive or elsewhere.

Can I reach Trinity after hours about an urgent bore near Corrigan Heights in Pleasant Hill?

Yes. A person answers Trinity’s phone 24 hours a day at (405) 409-7423, including after hours for an urgent request near Corrigan Heights. We can discuss the location and scope, then plan around local crossings and marked utilities.

How much notice does Texas811 need for a Pleasant Hill bore near Princess Drive?

For a bore near Princess Drive, make the Texas811 locate request at least 48 hours before excavation, not counting Saturdays, Sundays and legal holidays, and no earlier than 14 days before work. If our US 287 work in Pleasant Hill slips more than 14 days past the original notice, we make a new request. Before we continue boring on Pipeline Road in Pleasant Hill, we refresh worn or moved marks through Texas811.

What affects the cost of a Pleasant Hill directional bore under US 287?

The scope of a US 287 bore drives the price: length, pipe or conduit size, soil and rock, marked utility crossings, pavement and access all matter. Ruby Creek or drainage crossings can add planning and pit work. The 415 road miles from Yukon also affect mobilization, along with emergency timing and other site needs.

Where the Pleasant Hill facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Pleasant Hill

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Pleasant Hill, Texas

Type the address of your job in Pleasant Hill. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Pleasant Hill

Same county: West Livingston · Livingston · Onalaska · Indian Springs · Big Thicket Lake Estates · Cedar Point · Goodrich. All counties: Texas county list.