trinityboringsolutions.com

Tradewinds Texas Directional Boring: Victoria Clay, FM 3284 And County Road 1360

Quick Answer: We take directional boring, also called horizontal directional drilling (HDD), in Tradewinds, Texas, including routes beneath FM 3284 and County Road 1360. The Yukon, Oklahoma main office is 578 road miles from Tradewinds, so a route along Trade Winds Road factors into mobilization. USDA maps show Victoria clay across much of the community, and sticky ground can grip pipe during a pull. We plan reaming and fluid use around those conditions.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Tradewinds bores at a glance

  • Unincorporated community in San Patricio County, Texas. Population 160 (2020 Census count).
  • Road distance from our Yukon, Oklahoma main office: 578 miles, about 11.2 hours of driving.
  • Ground: Victoria soil is mapped on 92 percent of the area, with clay about 40 inches down.
  • Rock: no bedrock is mapped in the top 60 inches.
  • Highways inside the boundary: FM 3284 and FM 136. State permit office: TxDOT Corpus Christi District.
  • Railroad track inside the boundary: none mapped.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who can I call for directional boring near FM 3284 in Tradewinds?

Trinity Boring Solutions takes directional boring work in Tradewinds, San Patricio County, where FM 3284 and County Road 1458 give routes for service lines. The Census Bureau counted 160 people in the 2020 Census; it does not publish yearly estimates for this unincorporated place. We bore water, sewer, gas, electric conduit and fiber beneath named roads such as County Road 1360, with the route checked for the specific address.

Our main office is in Yukon, Oklahoma, and Tradewinds work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our family business started in 1965, and we have done directional boring since 1982, experience we apply when planning FM 3284 crossings in Tradewinds. For a route near FM 3284, we handle sizes from 3/4 inch service lines to 48 inch casing and bore lengths from 10 feet to 5,000 feet.

Trinity Boring Solutions Vermeer D24x40 directional drill set up for a bore
Our Vermeer D24x40 directional drill set up for a bore. Photos on this page are from our jobs in Oklahoma and Texas.

What does the soil survey show beneath Victoria soil in Tradewinds?

The USDA soil survey maps Victoria soil across 92 percent of Tradewinds, mostly as Victoria clay with gentle slopes. Clay is the mapped surface texture across 93 percent of the area, and at about 40 inches below the surface, 99 percent is mapped as clay. The survey gives an average clay content of 59 percent at that depth. These are mapped soil patterns, not test borings at a proposed route. On County Road 1360, the actual bore still needs to be planned for the ground along its specific alignment.

USDA soil survey, inside the Tradewinds mapped community boundaryWhat is mapped
Soil series mappedVictoria 92 percent and Raymondville 7 percent
Texture at the surfaceclay 93 percent and clay loam 7 percent
Texture about 40 inches downclay 99 percent
Engineering class about 40 inches downfat clay (CH) 93 percent and lean clay (CL) 7 percent
Average clay content about 40 inches down59 percent
Bedrock mapped within 60 inchesNone mapped
Seasonal water table within 60 inches1 percent of the area
Flood prone soils0 percent of the area
High corrosion risk for uncoated steel99 percent of the area

Bedrock is not mapped within 60 inches in Tradewinds, so the survey does not show it in the top five feet; deeper rock is still possible. Seasonal water table soils are mapped in 1 percent of the area within 60 inches, and flood prone soils are not mapped. High steel corrosion risk covers 99 percent, which matters for casing and tracer wire; the line owner selects materials. The geologic map shows Delta silt and clay of Late Pleistocene age, including clay, silt and sand that can make drilling sticky around FM 3284.

How do we bore through clay in Tradewinds’ Victoria and Raymondville soils?

Victoria clay covers much of Tradewinds, so we plan the fluid, reaming sequence and pull around sticky ground. For a bore near Trade Winds Road, we also locate and expose marked lines before drilling close to them.

  1. Victoria clay can stick to a reamer and grip the pipe, so we use a thinner drilling fluid, add polymer as needed and ream in stages.
  2. Because heavy clay covers much of Tradewinds, we watch fluid returns near paved County Road 1360 to avoid pressure lifting the surface.
  3. Before drilling near a marked line along County Road 1458, we hydrovac pothole to expose it because paint does not show its depth.
  4. We track the drill head from the surface and record depth and pitch for a bore near FM 3284 as it advances through clay and silt.
Bore pit with a 6 inch PVC sleeve, traffic cones and blue water line flags at NE 24th Street in Oklahoma City
A bore pit with a 6 inch PVC sleeve, traffic cones and blue water line flags at NE 24th Street in Oklahoma City.

Where might a line go under County Road 1360 in Tradewinds?

FM 3284 and FM 136 are state highways inside the mapped Tradewinds community, with 0.6 and 0.5 mapped roadway miles respectively. County Road 1360 is the longest named street at 1.51 miles, followed by County Road 1458 at 0.65 miles. Trade Winds Road and County Road 4139 each run 0.46 miles inside the community. Those roads give possible routes for service lines, but the exact crossing and access points depend on the address and the line path.

CrossingTypeMapped extentWho has a say
FM 3284State highway0.6 roadway miles insideState highway office
FM 136State highway0.5 roadway miles insideState highway office
Swipe the table sideways to see every column.

Railroads are not mapped inside the Tradewinds boundary or within 1 mile outside it, so the records show no local track route to plan around. No named streams are mapped inside or within 1 mile of the community, and mapped street crossings of named streams are absent. The map also shows no lake or pond features within one mile. County Road 1360 still needs a route review for drainage and buried utilities at the proposed bore location.

Who approves a bore in San Patricio County near Tradewinds?

Tradewinds is an unincorporated census designated place with no city government, so work on community streets involves the county or state rather than a city department. A bore beneath FM 3284 or FM 136 within highway right of way needs a TxDOT utility permit, reviewed by the TxDOT Corpus Christi District. The utility owner, not the driller, files through TxDOT’s online RULIS system; we prepare the bore plan and profile for that filing. TxDOT rules set minimum cover depths by line type, and its permit may set a different depth. Existing highway pavement is bored or tunneled beneath.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Which utilities should we check in San Patricio County near Tradewinds?

The water provider for an address along County Road 1458 has to be confirmed with the city, the county or the local water district before a bore is planned. EPA drinking water records do not match a system to Tradewinds, so the specific provider needs to be checked before route planning. AEP Texas Central and San Patricio Electric Cooperative report electric service in San Patricio County. For an electric conduit bore near FM 3284, we confirm the line owner for that address rather than assume which provider serves it.

Line ownerWhat it isSourceSize
AEP Texas Central and San Patricio Electric CooperativeElectric utilities reporting service in San Patricio CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put every Tradewinds housing unit in the 1960 to 1999 period, with a median build year of 1993. That age can mean a County Road 1360 project replaces an existing line, while a new service still needs its route checked. Before the drill approaches any marked utility, we hydrovac pothole it to confirm its depth; paint alone shows position, not depth.

Mini excavator digging beside a pad mounted electrical transformer with red dirt spoil and a vacuum excavation trailer on site
Digging beside a pad mounted electric transformer with a vacuum excavation trailer on site.

What is near Tradewinds and Falman?

Tradewinds is in San Patricio County, covers 1.08 square miles and sits at an elevation of 19 feet, with ZIP code 78390. Gregory is 5.3 miles south, Falman is 7.1 miles southeast, Bayside is 7.6 miles northeast and Taft is 8.2 miles west. Portland, the nearest larger city, is 8.5 miles southwest; Sinton, the county seat, is 15.0 miles west. The Yukon yard is 578 road miles away, a 11.2 hour drive, so a Trade Winds Road project includes long distance mobilization.

Places near Tradewinds

What would we bore near Trade Winds Road in Tradewinds?

  • Highway crossing: A route beneath FM 3284 uses boring or tunneling under existing pavement and needs the utility owner’s TxDOT permit.
  • Water service: A County Road 1458 service route needs the address specific water provider confirmed before we plan the bore.
  • Fiber conduit: A run beneath Trade Winds Road can keep the roadway surface uncut while the conduit follows the planned route.
  • Utility replacement: Along County Road 1360, we expose marked lines before drilling near them so the bore can pass at a verified depth.
  • Electric conduit: Near FM 136, we confirm which line owner serves the address before planning a conduit bore.
  • Residential service: A route near County Road 4139 is planned around Victoria clay, the entry and exit pits and the utilities on its path.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What should I send for a bore quote near County Road 4139 in Tradewinds?

A map pin for County Road 4139 matters because a short shift in the route can change which utilities or road surface the bore meets. Send the address, what is going in the ground, the pipe or conduit size and the footage. A sketch or plan helps us see the entry and exit points and any nearby pavement.

At 578 road miles from Yukon, mobilization is part of pricing for a County Road 4139 job. Victoria clay affects drilling and reaming, while a crossing beneath FM 3284 brings highway planning into the scope. We also consider length, pipe or conduit size, marked utilities to expose, pavement, drainage, pits, excavator time and sand backfill. Emergency timing or other high profile work can change the crew and equipment plan.

Questions people ask about boring in Tradewinds

Does Trinity take directional boring jobs in Tradewinds, San Patricio County, and how are crews staffed?

Yes, we take directional boring jobs in Tradewinds, including routes near FM 3284. Work is carried out by our crews or from satellite yards operated by partner drilling contractors we have vetted. Customers work with Trinity from the first call through the bore log, whichever crew is on site.

What do the homes and buried lines near County Road 1458 in Tradewinds mean for a replacement bore?

The American Community Survey 2019 to 2023 estimates place all Tradewinds housing units in the 1960 to 1999 era, with a median year built of 1993. That age makes replacement work a possibility along County Road 1458, but it does not establish what is buried at a specific address. Along County Road 1360 in Tradewinds, we expose marked utilities before drilling near them.

Can Victoria soil corrode steel on a Tradewinds bore, and what pipe should I use?

The USDA soil survey maps high steel corrosion risk across 99 percent of Tradewinds, including Victoria clay areas. That makes the line owner’s material choice important for steel casing and tracer wire. HDPE is not affected by soil corrosion, but the right material depends on the line and job requirements near FM 3284.

What ground will a Tradewinds bore pass through in Victoria soil?

The USDA soil survey maps Victoria soil across 92 percent of Tradewinds, with clay as the surface texture across 93 percent. At about 40 inches below the surface, 99 percent of mapped soil is clay and the average clay content is 59 percent. Those mapped patterns around County Road 1360 are not a substitute for checking the actual route.

Could our directional bore beneath FM 136 in Tradewinds hit rock?

Bedrock is not mapped within 60 inches in Tradewinds, though that does not rule out deeper rock along FM 3284. The geologic map instead shows Delta silt and clay of Late Pleistocene age, with clay, silt and sand. We plan for the mapped sticky ground but confirm conditions along the bore path.

Who approves a bore beneath FM 3284 in Tradewinds?

For work in FM 3284 right of way, the utility owner applies for a TxDOT utility permit through RULIS. The TxDOT Corpus Christi District reviews it, and we prepare the bore plan and profile for the owner’s application. Tradewinds has no city government, so community streets are handled by the county or state.

How early should I call Texas811 for a Tradewinds bore along County Road 1360?

For County Road 1360, Texas law requires a locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days beforehand. For work in San Patricio County, if our start slips more than 14 days past the original notice, we submit a new request. For work along Trade Winds Road in Tradewinds, we refresh worn or moved marks through Texas811 before work continues.

Does the 578 road mile trip from Yukon affect a Tradewinds job near Portland?

Tradewinds is 578 road miles from our Yukon main office, and Portland is 8.5 miles southwest of the community. The distance can affect mobilization and the crew plan for a bore near Trade Winds Road. The route, ground and access still determine what equipment and time the job needs.

What affects the price of directional boring near FM 3284 in Tradewinds?

The job scope drives pricing near FM 3284, including bore length, pipe or conduit size, Victoria clay and utilities that need potholing. Highway pavement or drainage crossings can add planning and equipment needs. The 578 road miles from Yukon also affect mobilization, while pits, excavator time, sand backfill and emergency timing can change the work plan.

Where the Tradewinds facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Tradewinds

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Tradewinds, Texas

Type the address of your job in Tradewinds. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Tradewinds

Same county: Ingleside · Aransas Pass · Sinton · Mathis · Odem · Taft Southwest · Ingleside on the Bay · St. Paul · Lakeshore Gardens-Hidden Acres · Lake City · Morgan Farm · San Patricio. All counties: Texas county list.