trinityboringsolutions.com

Beauxart Gardens Texas Directional Boring: Urban Land, Union Pacific and Port Arthur Canal

Quick Answer: Beauxart Gardens is an unincorporated community in Jefferson County, so county or state ownership matters; we do directional boring, also called horizontal directional drilling (HDD), for routes near the Union Pacific track. From our Yukon main office, the 520 road miles to Beauxart Gardens make mobilization part of planning for a Spur 93 crossing. The USDA survey maps Urban land (miscellaneous area) over 91 percent of the area, with variable ground that calls for checking conditions along each bore path. Port Arthur Canal and Rhodair Gully add water crossings that can affect the route and planning.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Beauxart Gardens bores at a glance

  • Unincorporated community in Jefferson County, Texas. Population 1,064 (2020 Census count).
  • Road distance from our Yukon, Oklahoma main office: 520 miles, about 10.3 hours of driving.
  • Ground: Urban land (miscellaneous area) soil is mapped on 91 percent of the area, with variable about 40 inches down.
  • Rock: no bedrock is mapped in the top 60 inches.
  • Highways inside the boundary: Spur 93. State permit office: TxDOT Beaumont District.
  • Railroad track inside the boundary: Union Pacific, with 1 mapped street and rail crossings.
  • Named streams inside the boundary: Port Arthur Canal and Rhodair Gully.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who does directional boring in Beauxart Gardens near Union Pacific?

Beauxart Gardens is an unincorporated community in Jefferson County, not a town with its own street department. The 2020 Census count was 1,064 people; the Census Bureau does not publish yearly estimates for unincorporated places. We install water, sewer, gas, electric conduit and fiber lines, including service routes along Garden Drive and crossings planned around the Union Pacific track.

Our main office is in Yukon, Oklahoma, and Beauxart Gardens work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. We have done directional boring since 1982. More than four decades of work informs how we plan for the variable mapped ground beside Garden Drive, where conditions can change along a short route.

Ditch Witch JT922 compact directional drill beside the Trinity Boring Solutions truck at NE 24th Street in Oklahoma City
Our Ditch Witch JT922 compact directional drill beside the Trinity truck on a sleeve bore at NE 24th Street in Oklahoma City. Photos on this page are from our jobs in Oklahoma and Texas.

What does Urban land (miscellaneous area) mean for Beauxart Gardens bores?

The USDA soil survey maps Urban land (miscellaneous area) across 91 percent of Beauxart Gardens. That classification reflects developed ground, so it does not describe one uniform drilling material. At about 40 inches below the surface, the survey maps variable texture over 91 percent of the area; Labelle clay loam is mapped over 4 percent. Average clay content at that depth is 40 percent, and heavy clay is mapped over 4 percent. At the mapped depth in Beauxart Gardens, we find no sandy area to account for when planning a bore. These are mapped soil patterns, not test borings, so the route still needs field checks.

USDA soil survey, inside the Beauxart Gardens mapped community boundaryWhat is mapped
Soil series mappedUrban land (miscellaneous area) 91 percent and Labelle 4 percent
Texture at the surfacevariable 91 percent and clay loam 4 percent
Texture about 40 inches downvariable 91 percent and silty clay 4 percent
Engineering class about 40 inches downfat clay (CH) 4 percent
Average clay content about 40 inches down40 percent
Bedrock mapped within 60 inchesNone mapped
Seasonal water table within 60 inches4 percent of the area
Flood prone soils0 percent of the area
High corrosion risk for uncoated steel4 percent of the area
Mapped as urban land (disturbed fill)91 percent of the area

The USDA soil survey does not map bedrock in the top five feet around Garden Drive, which does not rule out rock deeper down. A seasonal water table within 60 inches is mapped over 4 percent of the area, so pits may need pumping if they collect water. For underground work in Beauxart Gardens, we account for the survey showing no flood prone soils mapped. High steel corrosion risk covers 4 percent, a point for the line owner to consider for steel casing or tracer wire; HDPE is not affected by soil corrosion. The mapped geologic unit is Delta sand, silt, and gravel of Pleistocene age, which signals mixed material rather than a uniform cut.

How do we bore through variable ground in Beauxart Gardens?

The USDA survey maps variable texture across much of Beauxart Gardens. We use the route, field conditions and nearby features such as Port Arthur Canal to set the drilling approach, then check the path as the bore advances.

  1. For variable soil mapped around Garden Drive, we adjust the drilling fluid and ream in stages so sticky material does not build up on the tools.
  2. Near Port Arthur Canal, we plan the bore beneath the channel and check the route for water crossing jurisdiction before setting pits on each side.
  3. At the 4 percent mapped heavy clay area, we watch fluid returns closely because pressure can lift nearby pavement or slabs.
  4. Before approaching marked lines along Kilarney Road, we hydrovac pothole each utility; paint shows position, not depth, and we track the drill head from the surface.
Drilling fluid returns at the entry as the Vermeer D24x40 S3 drills a 385 foot sandstone rock bore in Guthrie, Oklahoma
Drilling fluid coming back to the entry pit as our Vermeer D24x40 drills a 385 foot bore in Guthrie, Oklahoma.

Which roads, tracks or creeks affect a Beauxart Gardens bore near Port Arthur Canal?

Spur 93 runs inside the mapped Beauxart Gardens boundary. US 96, US 69 and US 287 are each 0.4 miles from the boundary, so a route approaching those roads may involve a state highway right of way. Garden Drive is the longest named street at 2.27 miles in the community; Viterbo Road runs 1.06 miles, and Kilarney Drive and Kilarney Road each run 0.56 miles. Those streets help define possible routes, but the proposed bore path and ownership determine what must be crossed.

CrossingTypeMapped extentWho has a say
Spur 93State highway0.3 roadway miles insideState highway office
US 96Highway nearby0.4 miles outsideState highway office
US 69Highway nearby0.4 miles outsideState highway office
US 287Highway nearby0.4 miles outsideState highway office
Union PacificRailroad0.25 track miles insideThe railroad
Port Arthur CanalStream0.66 channel miles insideChecked for Corps of Engineers jurisdiction
Rhodair GullyStream0.55 channel miles insideChecked for Corps of Engineers jurisdiction
Rhodair BayouStream nearbyAlong the boundaryChecked for Corps of Engineers jurisdiction
Main C CanalStream nearbyAlong the boundaryChecked for Corps of Engineers jurisdiction
Main CanalStream nearbyAlong the boundaryChecked for Corps of Engineers jurisdiction
Gallier CanalStream nearby0.4 miles outsideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

Union Pacific owns 0.25 track miles inside Beauxart Gardens, and one mapped street and rail crossing is inside the community. Port Arthur Canal runs 0.66 channel miles inside the boundary, while Rhodair Gully runs 0.55 miles; mapped streets cross named streams at three locations. The mapped drainage network also includes 3.12 miles of unnamed drainage. Within one mile of Beauxart Gardens, we see no mapped lakes or ponds that would shape a boring route. A creek or canal route needs planning for the channel and its banks.

Who approves a Beauxart Gardens bore in Jefferson County?

Beauxart Gardens has no city government, so its public streets are under county or state authority rather than a city street department. For work in the right of way of Spur 93 or nearby US 69, US 96 or US 287, the utility owner applies for a TxDOT utility permit through RULIS; the TxDOT Beaumont District reviews it. We provide the bore plan and profile for the owner’s application and work under the permit issued to that owner. A crossing of the Union Pacific track needs an agreement with the railroad, which sets crossing conditions. Port Arthur Canal or another water crossing is checked for U.S. Army Corps of Engineers jurisdiction during planning.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Whose lines are already buried in Beauxart Gardens, Jefferson County?

The provider for a specific Beauxart Gardens address cannot be matched from EPA drinking water records, so confirm the water provider with Jefferson County or the local water district before planning a bore. Entergy Texas reports electric service in the county, but that does not establish the owner at every address. Before an electric conduit route near Garden Drive is planned, we confirm the line owner and conduit requirements. Hydrovac potholing lets us see marked lines before drilling near the water service or electric facilities.

Line ownerWhat it isSourceSize
Entergy TexasElectric utilities reporting service in Jefferson CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put Beauxart Gardens’ median housing year at 1979. The survey estimates Beauxart Gardens homes at 12 percent built before 1960, 61 percent from 1960 to 1999, and 27 percent in 2000 or later, informing underground work planning. Routes serving older homes along Kilarney Road may involve replacement work, while newer housing can need new services. We expose marked utilities along the planned path before drilling near them; locate paint shows position, not depth.

Yellow polyethylene gas pipe pulled through a directional bore beside a commercial building
Yellow polyethylene gas pipe pulled through a directional bore beside a commercial building.

What is near Beauxart Gardens and Nederland?

Beauxart Gardens is in Jefferson County, with an elevation of 14 feet and a land area of 0.85 square miles. The community uses ZIP code 77705. Nederland is 2.1 miles east and is the nearest larger city; Central Gardens is 2.1 miles northeast. Port Neches is 4.4 miles east, and Groves is 7.2 miles east. Beaumont, the county seat, is 10.9 miles northwest. The Yukon yard is 520 road miles away, a 10.3 hour drive, which makes mobilization a route consideration for work near Spur 93.

Places near Beauxart Gardens

What would we bore near Garden Drive in Beauxart Gardens?

  • Highway crossing: A route under Spur 93 needs a bore plan that accounts for the state highway right of way and the pavement above it.
  • Street service: Water or sewer service along Garden Drive can be bored between work pits, leaving the paved street uncut.
  • Rail crossing: A utility route under the Union Pacific track needs railroad coordination for its crossing conditions and planned casing.
  • Canal crossing: A route under Port Arthur Canal needs channel planning and a check for U.S. Army Corps of Engineers jurisdiction.
  • Fiber conduit: A fiber route near Kilarney Road can be planned around marked utilities exposed before drilling begins.
  • Drainage crossing: A line near Rhodair Gully needs a route that accounts for the channel and the mapped drainage nearby.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What should I send for a Beauxart Gardens quote near Kilarney Road?

For a quote near Kilarney Road, send the address or map pin, what is going in the ground, the pipe or conduit size and the footage. A sketch or plans help us see how the proposed line relates to Garden Drive, the mapped drainage and nearby crossings. That route detail helps define the work before we plan a bore.

The 520 road miles from Yukon affect mobilization for a Beauxart Gardens job. The variable mapped soil near Garden Drive can change drilling and reaming needs, while a route under Spur 93 or the Union Pacific track adds crossing requirements. Price also reflects bore length, pipe or conduit size, utilities to expose, pavement or concrete, drainage crossings, pits, excavator time and sand backfill. High profile or emergency work can change the scope as well.

Questions people ask about boring in Beauxart Gardens

Does Trinity Boring Solutions take Jefferson County jobs in Beauxart Gardens, and how are crews assigned?

Yes. We take directional boring work in Beauxart Gardens and elsewhere in Texas. Our own crews or crews from partner drilling contractors Trinity has vetted may handle the work. You coordinate with Trinity from the first call through the bore log, including for a route near Garden Drive.

Who approves a Beauxart Gardens bore under Spur 93, and which state office handles it?

The utility owner applies for work in the Spur 93 right of way through TxDOT’s RULIS system. The TxDOT Beaumont District reviews the application, and the utility owner, not the drilling contractor, files it. We prepare the bore plan and profile for the owner’s application and work under its permit.

What does a Beauxart Gardens bore under the Union Pacific track require?

A crossing under the Union Pacific track requires an agreement with the railroad that owns it. The agreement sets crossing conditions such as casing, depth and flagging. The mapped track runs 0.25 miles inside Beauxart Gardens, so the route and the applicable railroad requirements need to be reviewed before work is planned.

Can a line be bored under Port Arthur Canal in Beauxart Gardens?

A bore can be planned for a route under Port Arthur Canal, but the channel crossing needs review during planning. Its mapped channel runs 0.66 miles inside Beauxart Gardens, and the route is checked for U.S. Army Corps of Engineers jurisdiction. The crossing plan also has to account for the channel banks and access for pits.

Who owns electric lines in Beauxart Gardens, Jefferson County, and who confirms conduit specs?

Entergy Texas reports electric service in Jefferson County, but that does not identify the electric line owner at every Beauxart Gardens address. We confirm the owner and conduit requirements for the specific route before planning a bore. Hydrovac potholing near Garden Drive can expose marked utilities before drilling approaches them.

Does a bore along Kilarney Drive in Beauxart Gardens need a city street cut?

No city government runs Beauxart Gardens; its streets are under county or state authority. A directional bore along Kilarney Drive can pass beneath pavement without an open cut, with pits placed in dirt on each side. The mapped community boundary and road ownership help determine who controls the route.

Does Trinity serve Nederland and rural sites outside Beauxart Gardens?

Yes. Trinity takes work across Texas, including projects in Nederland and rural locations outside the mapped Beauxart Gardens boundary. Nederland is 2.1 miles east of the community. We review each address and route separately, including its ground conditions, crossings and mobilization needs from the Yukon yard.

How much notice does Texas811 need for a Beauxart Gardens bore near Garden Drive?

For work near Garden Drive, make the Texas811 request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before the start. If work slips more than 14 days past the original notice, make a new request. We refresh worn or moved marks through Texas811 before work continues in Beauxart Gardens.

What affects the cost of a Beauxart Gardens bore near Spur 93?

The job details determine the price, including length, pipe or conduit size, ground, utility exposures and pavement. A route through variable soil near Spur 93 may take a different approach from one near Port Arthur Canal. Track or highway crossings, pits, excavator time, sand backfill and the 520 road miles from Yukon also affect the work.

Where the Beauxart Gardens facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Beauxart Gardens

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Beauxart Gardens, Texas

Type the address of your job in Beauxart Gardens. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Beauxart Gardens

Same county: Beaumont · Port Arthur · Fannett · China · Bevil Oaks · Nome · Hamshire. All counties: Texas county list.