trinityboringsolutions.com

Hamshire Texas Directional Boring: Morey Soil, Highway 124 and Mayhaw Bayou

Quick Answer: Can you get a line under Texas State Highway 124 without cutting the pavement? Yes, Trinity Boring Solutions does directional boring, also called horizontal directional drilling (HDD), in Hamshire, Texas, including routes beneath that highway. The Yukon, Oklahoma main office is 519 road miles from Hamshire, and a bore near Mayhaw Bayou needs its creek crossing considered in the plan. Morey soil and clay loam matter because sticky clay can grip the pipe, so we plan staged reaming and a timely pull.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Hamshire bores at a glance

  • Unincorporated community in Jefferson County, Texas. Population 962 (2020 Census count).
  • Road distance from our Yukon, Oklahoma main office: 519 miles, about 10 hours of driving.
  • Ground: Morey soil is mapped on 27 percent of the area, with clay loam about 40 inches down.
  • Rock: no bedrock is mapped in the top 60 inches.
  • Highways inside the boundary: Texas State Highway 124. State permit office: TxDOT Beaumont District.
  • Railroad track inside the boundary: none mapped.
  • Named streams inside the boundary: Mayhaw Bayou.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who can I call for directional boring under Texas State Highway 124 in Hamshire?

Can you get a line under Texas State Highway 124 without cutting the pavement? We take directional boring work in Hamshire, an unincorporated community in Jefferson County with 962 residents in the 2020 Census count. Water, sewer, gas, electric conduit and fiber can run beneath roads such as Wise Road or Hamshire Road, with the route planned around existing lines.

Our main office is in Yukon, Oklahoma, and Hamshire work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. For work near Mayhaw Bayou in Hamshire, our family business began in 1965, and we have done directional boring since 1982. For a Hamshire route beneath Texas State Highway 124, our equipment can handle 3/4 inch service lines through 48 inch casing and bore lengths from 10 feet to 5,000 feet.

Compact Ditch Witch drill rig boring a new utility line across a front yard on a residential street in Edmond, Oklahoma
Our compact Ditch Witch drill boring a new utility line across a front yard on a residential street in Edmond, Oklahoma. Photos on this page are from our jobs in Oklahoma and Texas.

How does Morey soil affect a directional bore in Hamshire?

The USDA soil survey maps Morey series across 27 percent of Hamshire, with Meaton at 21 percent and Anahuac at 20 percent. About 40 inches below the surface, the mapped texture is clay loam across 49 percent and clay across 39 percent of the area; the average clay content at that depth is 39 percent. Morey, Meaton, Anahuac, and Labelle map patterns guide our planning in Hamshire, but they are not substitutes for site specific test borings. For a route near Hamshire Road, that clay rich ground can cling to the reamer and grip the pipe, so the bore plan needs to account for sticky cuttings.

USDA soil survey, inside the Hamshire mapped community boundaryWhat is mapped
Soil series mappedMorey 27 percent, Meaton 21 percent, Anahuac 20 percent, Labelle 14 percent and Beaumont 8 percent
Texture at the surfaceloam 34 percent, silt loam 24 percent and very fine sandy loam 20 percent
Texture about 40 inches downclay loam 49 percent, clay 39 percent and silty clay 8 percent
Engineering class about 40 inches downlean clay (CL) 51 percent and fat clay (CH) 49 percent
Average clay content about 40 inches down39 percent
Bedrock mapped within 60 inchesNone mapped
Seasonal water table within 60 inches80 percent of the area
Flood prone soils0 percent of the area
High corrosion risk for uncoated steel100 percent of the area

Bedrock is not mapped in Hamshire’s top five feet, though the geologic map does not rule out rock deeper down. The mapped unit is Delta sand, silt, and gravel of Pleistocene age, a mix that can vary by location. Seasonal water table conditions are mapped within 60 inches across 80 percent of the area, so pits near Mayhaw Bayou may need pumping. On Wise Road in Hamshire, we account for the fact that flood prone soils are not mapped when planning underground work. High steel corrosion risk covers 100 percent of the mapped area; the line owner should consider steel casing and tracer wire materials, while HDPE is not affected by that soil concern.

How is a bore run through Hamshire’s clay loam?

The USDA soil survey maps clay loam and clay below Hamshire, where wet ground can affect the bore and the pits. We plan each route around the mapped ground and nearby features such as Mayhaw Bayou.

  1. Morey soil and the clay loam mapped beneath Hamshire can cling to the reamer, so we use thinner drilling fluid and work through the hole in stages.
  2. Because clay can grip pipe, we plan the pipe pull for the same work period as the final ream, including on routes near Hamshire Road.
  3. Seasonal water table conditions are mapped within 60 inches across much of Hamshire, so we keep entry and exit pits small and pump water when needed.
  4. At a Mayhaw Bayou route, we track the drill head from the surface, log depth and pitch, and plan the path beneath the channel.
Bore pit with a 6 inch PVC sleeve, traffic cones and blue water line flags at NE 24th Street in Oklahoma City
A bore pit with a 6 inch PVC sleeve, traffic cones and blue water line flags at NE 24th Street in Oklahoma City.

What is in the way of a new line near Wise Road in Hamshire?

Texas State Highway 124 runs 2.6 mapped roadway miles inside Hamshire, while Interstate 10 is 0.4 miles outside the mapped community boundary and Texas State Highway 73 is 1.1 miles away. Wise Road is the longest named street at 2.18 miles inside the community; Hamshire Road runs 2.04 miles and Marsh Road 1.27 miles. A bore route under one of these roads can leave the surface uncut, with entry and exit pits placed off the pavement where the site allows.

CrossingTypeMapped extentWho has a say
Texas State Highway 124State highway2.6 roadway miles insideState highway office
Interstate 10Highway nearby0.4 miles outsideState highway office
Texas State Highway 73Highway nearby1.1 miles outsideState highway office
Mayhaw BayouStream2.17 channel miles insideChecked for Corps of Engineers jurisdiction
South Fork Taylor BayouStream nearby0.3 miles outsideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

No railroad is mapped inside Hamshire or within one mile of its mapped boundary, so no local track crossing is identified. Mayhaw Bayou runs 2.17 channel miles through the community, and three mapped street crossings intersect named streams. A line planned beneath the bayou needs a crossing review for possible U.S. Army Corps of Engineers jurisdiction. No lakes or ponds are mapped within one mile, but drainage and wet ground still matter around the bayou.

Who has to sign off on a bore in Jefferson County and Hamshire?

Hamshire has no city government, so streets within this unincorporated community are handled by the county or the state. Work in Texas State Highway 124 right of way goes through TxDOT, with the Beaumont District reviewing the utility permit. The utility that owns the line files through TxDOT’s online RULIS system; we prepare the bore plan and profile and work under the permit issued to that owner. A Mayhaw Bayou crossing is checked during planning for U.S. Army Corps of Engineers jurisdiction. No railroad crossing is mapped in Hamshire.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Which utilities may have lines in Jefferson County and Hamshire?

EPA drinking water records do not identify a water provider for Hamshire by community name, so confirm the provider for the specific address with Jefferson County or the local water district before planning a bore near Wise Road. Entergy Texas reports electric service in Jefferson County, but that does not establish which company owns a line at each Hamshire address. Before planning an electric conduit bore along Marsh Road, we confirm the line owner to coordinate the route.

Line ownerWhat it isSourceSize
Entergy TexasElectric utilities reporting service in Jefferson CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put Hamshire’s median housing year at 1987; 23 percent of homes were built before 1960, 39 percent from 1960 to 1999 and 38 percent in 2000 or later. That mix can mean a project is replacing older pipe or adding a newer service along Hamshire Road. We expose every marked utility on the bore path with hydrovac potholing before drilling near it. For example, a line planned beneath Wise Road needs those marked lines exposed first because paint shows position, not depth.

Large HDPE conduit reels staged on a Rotate A Reel trailer for a fiber and utility installation in Oklahoma
HDPE conduit reels on a reel trailer for a fiber and utility installation in Oklahoma.

Do you cover Hamshire and nearby Stowell?

Hamshire is in Jefferson County, 13 feet above sea level across 2.98 square miles, with ZIP codes 77622 and 77665. Winnie is 4.5 miles southwest, and Stowell is 5.9 miles southwest. Fannett lies 6.8 miles northeast. Beaumont, the county seat and nearest larger city, is 19.1 miles northeast. From our Yukon, Oklahoma main office, Hamshire is 519 road miles away, about a 10.0 hour drive. That distance is part of planning mobilization for a bore near Texas State Highway 124.

Places near Hamshire

What would we bore near Hamshire Road in Hamshire?

  • Highway crossing: A bore beneath Texas State Highway 124 keeps the line below the roadway instead of cutting through its pavement.
  • Water service: A new water line near Wise Road needs the address specific water provider confirmed before the bore route is planned.
  • Fiber conduit: A fiber route along Hamshire Road can use a bore path that avoids opening the street surface.
  • Creek crossing: A Mayhaw Bayou bore needs a planned path beneath the channel and a review for possible federal jurisdiction.
  • Electric conduit: Before placing conduit near Powers Road, we confirm the line owner and expose marked utilities along the route.
  • Roadside service: A service line near Marsh Road can be planned around the mapped clay and seasonal water table.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What should I send for a Powers Road bore quote in Hamshire?

Send a map pin for the exact spot, especially if the route is near Powers Road or Mayhaw Bayou; the location shows us which road or drainage crossing shapes the plan. Tell us what goes underground, the pipe or conduit size and the footage. A sketch or plans help us review pits, access and nearby utilities before we scope the Hamshire bore.

A short bore along Powers Road with no pavement or drainage crossing is simpler to plan than a longer route under Texas State Highway 124. Length, pipe size, Morey soil conditions, utility exposures, pavement, creek crossings, pit work and backfill all affect the job. Mayhaw Bayou can add crossing and water planning, while Hamshire’s 519 road miles from Yukon affect mobilization. High profile or emergency work can also change the amount of planning and equipment needed.

Questions people ask about boring in Hamshire

Does Trinity Boring Solutions take directional boring jobs in Hamshire, Jefferson County, and who staffs them?

Yes. We take directional boring work in Hamshire, and our own crews or crews from satellite yards run by partner contractors we have vetted can handle the work. The customer works with Trinity from the first call through the bore log, regardless of which crew is on site. We plan around local features such as Texas State Highway 124.

Does Morey soil in Hamshire corrode steel, and what pipe should I use?

The USDA soil survey maps high steel corrosion risk across Hamshire, including areas with Morey soil. The line owner should weigh that concern when selecting steel casing or tracer wire materials. HDPE is not affected by the mapped soil corrosion concern. The right pipe depends on the line and its design, not the soil map alone.

What ground will a bore pass through in Hamshire’s Morey soil?

The USDA soil survey maps Morey across 27 percent of Hamshire. At about 40 inches below the surface, clay loam is mapped across 49 percent of the area and clay across 39 percent. That sticky ground can build up on a reamer or grip the pipe, so staged reaming and a timely pull can matter near Wise Road.

Should we expect a directional bore in Hamshire to encounter rock beneath Hamshire Road during drilling?

Bedrock is not mapped in the top five feet of Hamshire, but that does not rule out rock deeper down. The geologic map shows Delta sand, silt, and gravel of Pleistocene age. Actual conditions can vary along a route, so a bore near Mayhaw Bayou still needs planning for the ground encountered.

Does the TxDOT Beaumont District handle approval for our bore under Texas State Highway 124 in Hamshire?

TxDOT handles work in Texas State Highway 124 right of way, and its Beaumont District reviews the utility permit. The utility owner files the application through RULIS, while we prepare the bore plan and profile for that filing. The permit process applies to the highway crossing, not to every bore along Wise Road.

Can you bore a line under Mayhaw Bayou in Hamshire?

A bore can be planned beneath Mayhaw Bayou, which runs 2.17 channel miles through Hamshire. The route needs to account for the channel, wet ground and the location of the entry and exit pits. During planning, the crossing is checked for possible U.S. Army Corps of Engineers jurisdiction.

How far is Hamshire from Beaumont and Trinity’s Yukon office, and does that affect a job?

Hamshire is 19.1 miles southwest of Beaumont and 519 road miles from our Yukon, Oklahoma main office, about a 10.0 hour drive. The distance from Yukon affects mobilization planning for a job near Texas State Highway 124. The bore’s length, size, access and crossings also shape the work.

How much notice does Texas811 need for a bore on Wise Road in Hamshire?

For a Wise Road bore, submit the Texas811 locate request at least two working days before excavation, excluding Saturdays, Sundays and legal holidays. The request cannot be more than 14 days ahead. If the start slips more than 14 days past the original notice, make a new request; worn or moved marks must be refreshed through Texas811 before work continues.

What affects the cost of directional boring under Texas State Highway 124 in Hamshire?

The route and scope determine the price. Length, pipe or conduit size, Morey soil, utility exposures, pavement, pit work, backfill and drainage crossings all matter. A Mayhaw Bayou crossing can add planning needs, and Texas State Highway 124 brings highway right of way considerations. Mobilization from Yukon is another job factor for Hamshire.

Where the Hamshire facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Hamshire

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Hamshire, Texas

Type the address of your job in Hamshire. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Hamshire

Same county: Port Arthur · Nederland · Groves · Port Neches · Central Gardens · Bevil Oaks · Nome · Beauxart Gardens. All counties: Texas county list.