trinityboringsolutions.com

Fannett Texas Directional Boring: Labelle Soil, Interstate 10 and Gallier Canal

Quick Answer: For a Fannett bore, the water provider for the address must be confirmed, while Entergy Texas reports electric service in Jefferson County; that helps identify lines to expose before drilling. We do directional boring, also called horizontal directional drilling (HDD), for routes near BNSF Railway. Fannett is 512 road miles from our Yukon, Oklahoma main office, so mobilization is part of planning for a Gallier Canal crossing. Labelle soil and heavy clay can stick to a reamer, so we plan staged reaming and manage fluid returns.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Fannett bores at a glance

  • Unincorporated community in Jefferson County, Texas. Population 2,363 (2020 Census count).
  • Road distance from our Yukon, Oklahoma main office: 512 miles, about 10.1 hours of driving.
  • Ground: Labelle soil is mapped on 41 percent of the area, with clay about 40 inches down.
  • Rock: no bedrock is mapped in the top 60 inches.
  • Highways inside the boundary: Interstate 10, FM 365 and Texas State Highway 124. State permit office: TxDOT Beaumont District.
  • Railroad track inside the boundary: BNSF Railway, with 3 mapped street and rail crossings.
  • Named streams inside the boundary: Gallier Canal and Byu Din.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who does directional boring in Fannett near BNSF Railway?

Fannett is an unincorporated community in Jefferson County, with a population of 2,363 in the 2020 Census count; the Census Bureau does not publish yearly estimates for unincorporated places. We install water, sewer, gas, electric conduit and fiber, including routes beneath Burrell-Wingate Road or toward BNSF Railway. The line owner and the marked utilities along the planned path shape the bore plan.

Our main office is in Yukon, Oklahoma, and Fannett work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. When we plan directional boring in Fannett, we draw on our family business roots dating to 1965 and directional boring experience since 1982. Our 3/4 inch service line to 48 inch casing range gives us options for the roads and crossings around Fannett.

Horizontal directional drill rig set up on an open grass field with support trucks and a vacuum excavation truck
Our horizontal directional drill set up in an open field with the support trucks and the vacuum excavation truck. Photos on this page are from our jobs in Oklahoma and Texas.

What does the USDA soil survey show for Labelle soil in Fannett?

The USDA soil survey maps Labelle as the leading soil series in Fannett, covering 41 percent of the mapped area. At about 40 inches, clay is mapped across 51 percent and silty clay across 16 percent; the average clay content at that depth is 42 percent. The survey also maps heavy clay across 75 percent of the area at that depth. In Fannett, we treat these as mapped soil patterns, not test borings. For a bore, that much clay can make the reamer sticky and the cuttings ball up, so the ground at the exact route still needs to guide the plan.

USDA soil survey, inside the Fannett mapped community boundaryWhat is mapped
Soil series mappedLabelle 41 percent, Urban land (miscellaneous area) 12 percent, League 10 percent, Mollco 8 percent and Anahuac 8 percent
Texture at the surfaceloam 37 percent, clay 17 percent and clay loam 16 percent
Texture about 40 inches downclay 51 percent, silty clay 16 percent and variable 12 percent
Engineering class about 40 inches downfat clay (CH) 69 percent and lean clay (CL) 18 percent
Average clay content about 40 inches down42 percent
Bedrock mapped within 60 inchesNone mapped
Seasonal water table within 60 inches81 percent of the area
Flood prone soils4 percent of the area
High corrosion risk for uncoated steel87 percent of the area
Mapped as urban land (disturbed fill)12 percent of the area

The soil survey maps a seasonal water table within 60 inches across 81 percent of Fannett, so pits may need pumping and compact dimensions. Flood prone soils cover 4 percent, which calls for route specific planning near Gallier Canal. High steel corrosion risk is mapped across 87 percent, a concern for steel casing and tracer wire that the line owner should address when selecting materials. When we plan boring depth in Fannett, bedrock is not mapped in the top five feet. The geologic map shows the Beaumont Formation, areas predominantly sand, of Pleistocene age; that mapped unit can include sand, silt and clayey channel deposits.

How do we bore Fannett clay and Labelle soil?

Labelle soil and the mapped clay at about 40 inches call for a bore plan that controls sticky cuttings and fluid returns. We adjust the method to the route, including pavement or a Gallier Canal crossing.

  1. In the mapped heavy clay around Fannett, we use staged reaming and a thinner fluid mix with polymer to keep sticky cuttings moving.
  2. Because heavy clay covers 75 percent of the mapped area at about 40 inches, we watch returns closely so drilling pressure does not lift pavement.
  3. With seasonal water tables mapped within 60 inches across 81 percent of Fannett, we keep pits compact and pump water when needed.
  4. Near Gallier Canal, we plan the bore depth beneath the channel and check the route for Corps jurisdiction during planning.
Trinity Boring Solutions water trailer supplying water for bentonite drilling fluid on a sleeve bore in northeast OKC
Our water trailer feeding the bentonite drilling fluid mix on a sleeve bore in northeast Oklahoma City.

What is in the way of a new line near Gallier Canal in Fannett?

Interstate 10, FM 365 and Texas State Highway 124 run inside the mapped Fannett community boundary. A bore beneath existing highway pavement uses a bore or tunnel rather than an open cut. Burrell-Wingate Road is the longest named street at 2.16 miles inside the community; Gaulding Road covers 2.01 miles and Clubb Road 1.43 miles. The exact route determines which road owner and pavement conditions enter the plan, and marked utilities must be exposed before the drill approaches them.

CrossingTypeMapped extentWho has a say
Interstate 10Interstate2.9 roadway miles insideState highway office
FM 365State highway4.2 roadway miles insideState highway office
Texas State Highway 124State highway2.9 roadway miles insideState highway office
BNSF RailwayRailroad1.6 track miles insideThe railroad
Gallier CanalStream3.1 channel miles insideChecked for Corps of Engineers jurisdiction
Byu DinStream0.24 channel miles insideChecked for Corps of Engineers jurisdiction
Burrell GullyStream nearby0.1 miles outsideChecked for Corps of Engineers jurisdiction
DinStream nearby0.2 miles outsideChecked for Corps of Engineers jurisdiction
Kidd GullyStream nearby0.2 miles outsideChecked for Corps of Engineers jurisdiction
Din BayouStream nearby0.3 miles outsideChecked for Corps of Engineers jurisdiction
Lowell LakeLake or pond34 acres, nearbyChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

BNSF Railway owns 1.6 track miles inside Fannett on its Silsbee Subdivision, and public records map 3 street and rail crossings. Gallier Canal runs 3.1 channel miles inside the community, while Byu Din adds 0.24 miles; 4 street crossings of named streams are mapped. Lowell Lake is within one mile, outside the boundary. Those features may require a deeper route or a crossing review, and the canal route is checked for federal waterway jurisdiction during planning.

Do I need a permit to bore in Fannett, Jefferson County?

Fannett is unincorporated, so it has no city government; street permissions fall to Jefferson County or the state, depending on the road. For Interstate 10, FM 365 or Texas State Highway 124 right of way, TxDOT utility permission is needed. The TxDOT Beaumont District reviews the application in RULIS, filed by the utility owner; we prepare the bore plan and profile for that filing. Cover requirements depend on the line type and whether it crosses or runs along the highway. A bore beneath BNSF Railway needs an agreement with the railroad, and a Gallier Canal crossing is checked for Corps jurisdiction during planning.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

What is already in the ground in Fannett, Jefferson County?

The provider serving a specific Fannett address must be confirmed with the county or local water district before a bore is planned. Entergy Texas reports electric service in Jefferson County, but that does not establish the owner of the line at every address. Before a conduit route near Burrell-Wingate Road is set, we confirm the electric line owner and have the marked utilities on the path exposed so the drill does not rely on surface marks for depth.

Line ownerWhat it isSourceSize
Entergy TexasElectric utilities reporting service in Jefferson CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

In Fannett, we use the American Community Survey 2019 to 2023 five year estimates, which put its median housing year at 2001, as underground planning context. It estimates 9 percent of housing was built before 1960, 39 percent from 1960 to 1999 and 52 percent in 2000 or later. That mix can mean both replacement work and new service routes near FM 365. Before drilling near a marked water or electric line, hydrovac potholing exposes it; paint shows location, not depth.

Reel of yellow polyethylene gas pipe on a trailer staged for a directional bore
A reel of yellow polyethylene gas pipe on a trailer, staged for a directional bore.

Where is Fannett in relation to Beaumont and our Yukon office?

Fannett is an unincorporated community in Jefferson County, covering 9.8 square miles at an elevation of 20 feet. Its ZIP code is 77705. Hamshire is 6.8 miles southwest, Taylor Landing is 8.0 miles southeast, China is 9.7 miles northwest and Winnie is 11.2 miles southwest. Beaumont, the county seat and nearest larger city, is 12.4 miles northeast. The Yukon, Oklahoma main office is 512 road miles away, a 10.1 hour drive, so distance affects mobilization for work near Interstate 10 or Gallier Canal.

Places near Fannett

What would we bore along Burrell-Wingate Road in Fannett?

  • Highway crossing: A route beneath Interstate 10 pavement is bored or tunneled, with the utility owner handling the TxDOT right of way application.
  • Water service: A new service near Burrell-Wingate Road starts with confirming the address’s water provider and locating marked lines along the route.
  • Fiber route: Fiber conduit along FM 365 can be bored beneath pavement to avoid opening the road surface.
  • Canal crossing: A line beneath Gallier Canal needs a route and depth plan, with jurisdiction checked during planning.
  • Rail crossing: A proposed bore under BNSF Railway needs the railroad’s agreement for the crossing conditions.
  • Electric conduit: Near Texas State Highway 124, we confirm the line owner before planning a conduit bore.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What drives the price of a Fannett bore near Interstate 10?

For a quote near Interstate 10 or Burrell-Wingate Road, give us the address or map pin first. Tell us what will go underground, such as water or fiber, then the pipe or conduit size and expected footage. A sketch or plans help show whether the route approaches BNSF Railway, Gallier Canal or pavement, all of which can change the bore layout.

In Fannett, soil and water conditions matter first: heavy clay can load the reamer, and a seasonal water table can affect pits. Next are the crossings, including Interstate 10 pavement, BNSF Railway track and Gallier Canal, plus how many marked utilities need exposure. Pipe size, bore length, pits, excavator time and backfill also shape the work. Fannett’s 512 road miles from Yukon affect mobilization, while emergency timing or a high profile route can add planning demands.

Questions people ask about boring in Fannett

Does Trinity Boring Solutions take jobs in Fannett, Jefferson County, and how are crews assigned?

Yes. We take directional boring work in Fannett and across Texas, planning crossings around the conditions at each site. Our own crews and satellite yards operated by partner drilling contractors we have vetted can support the work, while you deal with Trinity from the first call through the bore log. The specific route, such as a crossing near Burrell-Wingate Road, helps us plan the crew and equipment.

With bedrock not mapped in the top five feet, will we hit rock on a bore in Fannett?

The soil survey does not map bedrock in the top five feet, but that does not rule out deeper rock. The geologic map shows the Beaumont Formation, areas predominantly sand, of Pleistocene age. A route near Gallier Canal still needs site specific planning because the mapped unit includes varied deposits.

Who approves a Fannett bore under Interstate 10?

TxDOT reviews utility work in Interstate 10 right of way through the TxDOT Beaumont District. The utility owner files the application in RULIS, and we prepare the bore plan and profile for it. The line type and whether the route crosses or runs along the highway determine the applicable cover requirements.

What does a Fannett bore under BNSF Railway need?

A crossing beneath BNSF Railway needs an agreement with the railroad that owns the track. The agreement sets crossing conditions such as casing, depth and flagging. Fannett has 1.6 track miles inside the mapped community boundary, so the route must be checked against the actual track location.

Can a line be bored under Gallier Canal in Fannett?

A bore can be planned beneath Gallier Canal, subject to the route and project review. The canal runs 3.1 channel miles inside Fannett, and a water crossing is checked for U.S. Army Corps of Engineers jurisdiction during planning. We also plan depth to stay beneath the channel.

Who owns electric lines in Fannett, Jefferson County, and who confirms conduit specs?

Entergy Texas reports electric service in Jefferson County, but that does not identify the owner at every Fannett address. The line owner for the specific route must be confirmed before conduit planning, including a route near FM 365. The owner can confirm the conduit requirements for its line.

How much notice does Texas811 need for a Fannett bore on Burrell-Wingate Road?

The person arranging a bore on Burrell-Wingate Road must request a Texas811 locate at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days ahead. For a Fannett start, if work slips more than 14 days past the original notice, we make a new request. Before work continues in Fannett, we have worn or moved marks refreshed through Texas811.

How far is Fannett from Beaumont and Trinity’s Yukon office, and does distance affect the job?

Beaumont is 12.4 miles northeast of Fannett, while the Yukon, Oklahoma main office is 512 road miles away, a 10.1 hour drive. That distance can affect mobilization for a route near Interstate 10. The address, bore length, equipment needs and crossing conditions help establish the work plan.

What affects the cost of a directional bore near Interstate 10 in Fannett?

The route and scope drive the price. Heavy clay, bore length and pipe size affect the drilling work; Interstate 10 pavement, BNSF Railway or Gallier Canal crossings can add planning and crossing requirements. The number of utilities to expose, pit work, backfill and mobilization from Yukon also matter. We need the route details to assess the job.

Where the Fannett facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Fannett

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Fannett, Texas

Type the address of your job in Fannett. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Fannett

Same county: Port Arthur · Nederland · Groves · Port Neches · Central Gardens · Bevil Oaks · Nome · Beauxart Gardens. All counties: Texas county list.