trinityboringsolutions.com

Bevil Oaks Texas Directional Boring: Texla Soil, Pine Island Bayou, State Highway 105

Quick Answer: The mapped Texla silt loam around Pine Island Bayou can hold a bore open, while clay may cling to the reamer. Trinity Boring Solutions handles directional boring, also called horizontal directional drilling (HDD), in Bevil Oaks, Texas, including routes beneath Texas State Highway 105. Our Yukon, Oklahoma main office is 498 road miles away, and Sweetgum Road is one local route where access shapes setup. At about 40 inches, 71% of mapped ground is silty clay loam, so we control fluid and ream in stages.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Bevil Oaks bores at a glance

  • Incorporated city in Jefferson County, Texas. Population 1,046 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 498 miles, about 9.7 hours of driving.
  • Ground: Texla soil is mapped on 71 percent of the area, with silty clay loam about 40 inches down.
  • Rock: no bedrock is mapped in the top 60 inches.
  • Highways inside the boundary: Texas State Highway 105. State permit office: TxDOT Beaumont District.
  • Railroad track inside the boundary: none mapped.
  • Named streams inside the boundary: Pine Island Bayou.
  • Public water: City of Bevil Oaks, groundwater wells.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Which contractor handles directional boring near Bevil Oaks and Pine Island Bayou?

Trinity Boring Solutions takes directional boring work in Bevil Oaks, Jefferson County, where the Census Bureau Vintage 2024 estimate puts the population at 1,046. Water and sewer lines can follow residential streets such as River Bend Drive, while gas, electric conduit and fiber routes are planned around Texas State Highway 105 and Pine Island Bayou. Route and access help determine the method.

Our main office is in Yukon, Oklahoma, and Bevil Oaks work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our longest bore is roughly 4,100 feet of 48 inch pipe under the Arkansas River in Tulsa, Oklahoma. That is a different scale from a service route near Shipley Drive. From our Yukon main office, Bevil Oaks is 498 road miles away; our family business began in 1965 and has done directional boring since 1982.

Compact Ditch Witch drill rig boring a new utility line across a front yard on a residential street in Edmond, Oklahoma
Our compact Ditch Witch drill boring a new utility line across a front yard on a residential street in Edmond, Oklahoma. Photos on this page are from our jobs in Oklahoma and Texas.

What does Texla soil mean for a bore in Bevil Oaks?

The USDA soil survey maps Texla across 71% of Bevil Oaks and Simelake across 29%; these are mapped patterns, not test borings. Surface texture is silt loam across 71% and clay across 29%. At about 40 inches below the surface, 71% is silty clay loam and 29% is clay. That mix can hold the hole but make cuttings sticky, while heavier clay zones can ball on a reamer. No sandy area is mapped at that depth, so we do not plan for a sand dominated bore.

USDA soil survey, inside the Bevil Oaks city limitsWhat is mapped
Soil series mappedTexla 71 percent and Simelake 29 percent
Texture at the surfacesilt loam 71 percent and clay 29 percent
Texture about 40 inches downsilty clay loam 71 percent and clay 29 percent
Engineering class about 40 inches downlean clay (CL) 71 percent and fat clay (CH) 29 percent
Average clay content about 40 inches down35 percent
Bedrock mapped within 60 inchesNone mapped
Seasonal water table within 60 inches100 percent of the area
Flood prone soils29 percent of the area
High corrosion risk for uncoated steel100 percent of the area

The USDA soil survey maps a seasonal water table within 60 inches across Bevil Oaks and within 40 inches across 71%, so pits near Sweetgum Road may need pumping. Flood prone soils cover 29%, making Pine Island Bayou depth relevant. High steel and concrete corrosion risk is mapped throughout the area; the line owner should consider protection for steel casing and tracer wire, while HDPE is unaffected by soil corrosion. Bedrock is not mapped in the top five feet near River Bend, but deeper rock is not ruled out. The geologic map shows Alluvial silt and clay of Chibanian age, a fine grained unit.

How do we bore through Bevil Oaks silty clay loam?

Texla silt loam and clay call for controlled fluid and staged reaming. Near Pine Island Bayou, we also account for shallow seasonal water and keep the route planned around the channel.

  1. Texla silt loam can stay open but cling to the reamer, so we use thinner fluid with polymer and open the hole in stages.
  2. Where the mapped clay is heavy, we watch fluid returns near Sweetgum Road to limit pressure that could lift pavement.
  3. The shallow seasonal water table calls for compact pits and pumping near River Bend when groundwater enters the work area.
  4. Before drilling near Pine Island Bayou, we expose marked utilities with hydrovac and track drill depth and pitch from the surface.
Trinity Boring Solutions water trailer supplying water for bentonite drilling fluid on a sleeve bore in northeast OKC
Our water trailer feeding the bentonite drilling fluid mix on a sleeve bore in northeast Oklahoma City.

What is in the way of a new line in Bevil Oaks near Sweetgum Road?

Texas State Highway 105 accounts for 0.9 mapped roadway miles inside Bevil Oaks; a utility crossing in its right of way needs a state permit and boring beneath existing pavement. Sweetgum Road is the longest named street at 2.09 miles in the city, followed by River Bend Drive at 1.86 miles and River Bend at 1.38 miles. Those street corridors make route selection and pit access important before work begins.

CrossingTypeMapped extentWho has a say
Texas State Highway 105State highway0.9 roadway miles insideState highway office
Pine Island BayouStream1.09 channel miles insideChecked for Corps of Engineers jurisdiction
Little Pine Island BayouStream nearbyAlong the boundaryChecked for Corps of Engineers jurisdiction
Fish Camp SloughStream nearby0.2 miles outsideChecked for Corps of Engineers jurisdiction
Coon Marsh GullyStream nearby0.4 miles outsideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

No railroad is mapped inside Bevil Oaks or within 1 mile, and the mapped street and rail crossing inventory identifies none. Pine Island Bayou runs 1.09 channel miles inside the city, but no street crossing of a named stream is mapped. Little Pine Island Bayou touches or follows the boundary, and Fish Camp Slough is 0.2 miles away. Those water features can affect channel depth and jurisdiction checks. No lakes or ponds are mapped within 1 mile of Bevil Oaks, while Pine Island Bayou is a stream we account for in boring plans.

Who has to sign off on a Bevil Oaks bore in Jefferson County?

River Bend Drive is a city street under the City of Bevil Oaks. For Texas State Highway 105 right of way, the line owner, not the driller, submits the utility permit in TxDOT’s RULIS system, and the TxDOT Beaumont District reviews it; we prepare a bore plan and profile for that filing. TxDOT cover rules specify 60 inches at crossings for electric, communication and water lines, 48 inches for electric and communication along the right of way, 36 inches for water there, and 60 inches at pressurized sewer crossings. A Pine Island Bayou route is checked for U.S. Army Corps of Engineers jurisdiction during planning.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

What is already in the ground near the City of Bevil Oaks water system?

The City of Bevil Oaks public water system draws from groundwater wells and lists 550 service connections serving 1,414 people. A tie in or crossing near those water lines needs existing utilities exposed before our drill approaches. Entergy Texas is reported as an electric service utility in Jefferson County, but that does not identify the line owner at every Bevil Oaks address; we confirm the owner before planning an electric conduit bore.

Line ownerWhat it isSourceSize
City of Bevil OaksPublic water systemGroundwater wells550 connections, 1,414 people served
Entergy TexasElectric utilities reporting service in Jefferson CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put Bevil Oaks median housing year at 1978: 3% before 1960, 87% from 1960 to 1999 and 10% in 2000 or later. That age mix makes replacement work and new services relevant along Shipley Drive. Before boring near the City of Bevil Oaks water system or Entergy Texas lines, we hydrovac marked utilities; paint shows position, not depth.

Mini excavator digging beside a pad mounted electrical transformer with red dirt spoil and a vacuum excavation trailer on site
Digging beside a pad mounted electric transformer with a vacuum excavation trailer on site.

Where is Bevil Oaks in relation to Pinewood Estates?

Bevil Oaks is in Jefferson County, 25 feet above sea level, and covers 2.04 square miles. Its ZIP code is 77713. Pinewood Estates is 3.1 miles northwest; Rose Hill Acres is 5.5 miles northeast, and Lumberton is 8.1 miles northeast. Lumberton is the nearest larger city. Beaumont, the county seat, is 8.8 miles southeast. The Yukon yard is 498 road miles away, a 9.7 hour drive, which is part of planning mobilization for work on Sweetgum Road or Texas State Highway 105.

Places near Bevil Oaks

What kinds of bores come up in Bevil Oaks near River Bend?

  • Water service: A connection near City of Bevil Oaks wells needs a route that accounts for existing service lines before tying into the system.
  • Highway crossing: A line beneath Texas State Highway 105 is bored below pavement, with the line owner handling the TxDOT right of way permit.
  • Street conduit: A fiber or electric conduit along Sweetgum Road can use staged pits to keep pavement and driveway surfaces intact.
  • Bayou crossing: A Pine Island Bayou route needs channel depth planning and a check for U.S. Army Corps of Engineers jurisdiction.
  • Sewer replacement: A sewer route near River Bend Drive can be planned as a bore to avoid opening the street surface.
  • Emergency response: For an urgent line issue near Shipley Drive, our phone is answered by a person 24 hours a day.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What drives the price of a Bevil Oaks bore near Shipley Drive?

For a Shipley Drive quote, send the address or map pin, what will go in the ground, the pipe or conduit size and footage, plus any sketch or plans. That lets us map the proposed route against street access and marked lines. In Bevil Oaks, Texla clay and wet ground can affect pit placement, reaming and fluid control.

Texla’s sticky silty clay loam and shallow seasonal water lead our review because they affect reaming, fluid control and pit work. We also account for route length, pipe size, marked utilities to expose, pavement on Sweetgum Road, and any Pine Island Bayou crossing. Pit and excavator time, backfill needs and emergency timing change the scope too. Mobilization matters for Bevil Oaks because the Yukon yard is 498 road miles away.

Questions people ask about boring in Bevil Oaks

Does Trinity Boring Solutions take Bevil Oaks jobs in Jefferson County, and who staffs them?

Yes. We take work in Bevil Oaks and staff it with our own crews or partner drilling contractors from satellite yards we have vetted. You work with Trinity from the first call through the bore log, including a route near Texas State Highway 105.

Does Texla soil in Bevil Oaks put steel pipe at corrosion risk, and what pipe can we use?

The USDA soil survey maps high steel corrosion risk across Bevil Oaks, including areas with Texla soil. The line owner selects protection for steel casing and tracer wire. HDPE is unaffected by the mapped soil corrosion concern, so pipe choice depends on the line and project requirements near River Bend.

What ground does a Bevil Oaks bore pass through in Texla soil?

The USDA soil survey maps Texla across 71% of Bevil Oaks. At about 40 inches, 71% of mapped ground is silty clay loam and 29% is clay. The clay can make cuttings sticky and grip the pipe, so staged reaming and controlled fluid help on routes near Sweetgum Road.

What does the Bevil Oaks geology map say about rock below a bore route?

Across Bevil Oaks, we account for Texla and Simelake soils with a silt loam surface; bedrock is not mapped in the top five feet, though deeper rock remains possible. The geologic map identifies Alluvial silt and clay of Chibanian age. Along River Bend, the mapped unit indicates fine grained material rather than shallow mapped bedrock.

Who should we approach at the TxDOT Beaumont District to approve a bore beneath Texas State Highway 105 in Bevil Oaks?

The line owner files the right of way utility permit through TxDOT’s RULIS system, and the TxDOT Beaumont District reviews it. We prepare the bore plan and profile for the owner’s filing. A route under Texas State Highway 105 also has to follow the cover conditions set for the line type.

Can a line be bored under Pine Island Bayou in Bevil Oaks?

A bore can be planned for a Pine Island Bayou crossing, but the route needs channel depth planning and a check for U.S. Army Corps of Engineers jurisdiction. The bayou runs 1.09 channel miles inside Bevil Oaks. We also expose marked utilities before the drill approaches the crossing.

Can I reach Trinity after hours about an urgent bore near River Bend in Bevil Oaks?

Yes. A person answers our phone 24 hours a day, and we provide emergency response for urgent work near River Bend. Tell us where the issue is and what line is involved so the response can be considered against access and the wet ground mapped in Bevil Oaks.

How much notice does Texas811 need for a Bevil Oaks bore on Sweetgum Road?

Count back at least 48 hours, excluding Saturdays, Sundays and legal holidays, from a planned start near Sweetgum Road. For a planned bore along Sweetgum Road in Bevil Oaks, we treat Texas811’s notice period as at least two working days. A request cannot be made earlier than 14 days before work; if the start slips more than 14 days past the original notice, make a new request, and refresh worn or moved marks through Texas811 before continuing.

What affects the cost of directional boring near Texas State Highway 105 in Bevil Oaks?

The main factors are route length, pipe or conduit size, Texla soil conditions, utilities that must be exposed, and pavement or creek crossings. A Pine Island Bayou route can add crossing and pit considerations. Mobilization also matters because the Yukon yard is 498 road miles from Bevil Oaks.

Where the Bevil Oaks facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Bevil Oaks

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Bevil Oaks, Texas

Type the address of your job in Bevil Oaks. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Bevil Oaks

Same county: Beaumont · Port Arthur · Nederland · Groves · Port Neches · Central Gardens · Fannett · Nome · Taylor Landing · Beauxart Gardens · Hamshire. All counties: Texas county list.