trinityboringsolutions.com

Nederland Texas Directional Boring: Urban Land Soil, US 96 And Main C Canal

Quick Answer: Along US 96, Avenue H and Nederland Avenue, we take directional boring, also called horizontal directional drilling (HDD), work in Nederland, Texas. Our Yukon main office is 522 road miles away, and Main C Canal is one local crossing to plan around. Main C Canal and Lnva Canal run through the city, creating water crossings to assess. Urban land (miscellaneous area) soil is mapped across 98 percent of Nederland, and its clay rich ground can cling to tooling and pipe.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Nederland bores at a glance

  • Incorporated city in Jefferson County, Texas. Population 18,168 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 522 miles, about 10.3 hours of driving.
  • Ground: Urban land (miscellaneous area) soil is mapped on 98 percent of the area, with variable about 40 inches down.
  • Rock: no bedrock is mapped in the top 60 inches.
  • Highways inside the boundary: US 96, US 69, US 287, Texas State Highway 347 and FM 365. State permit office: TxDOT Beaumont District.
  • Railroad track inside the boundary: CPKC (Kansas City Southern), with 6 mapped street and rail crossings.
  • Named streams inside the boundary: Main C Canal, Lnva Canal, Rhodair Gully and Port Arthur Canal.
  • Public water: City of Nederland, surface water.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who does directional boring near US 96 in Nederland?

Nederland is in Jefferson County, where the Census Bureau Vintage 2024 estimate puts the population at 18,168. Along US 96, Avenue H or Nederland Avenue, we can bore water, sewer, gas, electric conduit and fiber lines while keeping the road surface intact. Our work includes directional boring and horizontal directional drilling (HDD), with route planning shaped by the street and the line being installed.

Our main office is in Yukon, Oklahoma, and Nederland work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our longest bore was roughly 4,100 feet of 48 inch pipe under the Arkansas River in Tulsa. By comparison, a typical Nederland job could be a shorter utility crossing near US 96, planned for its clay ground and nearby lines.

Ditch Witch directional drill rig with a loaded drill rod rack staged at a commercial jobsite
Our Ditch Witch directional drill with a full rack of drill rod staged at a commercial site. Photos on this page are from our jobs in Oklahoma and Texas.

What is Urban land (miscellaneous area) soil like to bore in Nederland?

The USDA soil survey maps Urban land (miscellaneous area) across 98 percent of Nederland. Surface texture and texture at 40 inches are both listed as variable, so the mapped description does not point to one uniform drilling condition for every route. At about 40 inches below the surface, the mapped average clay content is 57 percent. Those are soil survey patterns, not test borings. Clay can stick to the reamer and grip pipe, so the drilling fluid and reaming sequence need to suit the actual ground encountered along streets such as Avenue H.

USDA soil survey, inside the Nederland city limitsWhat is mapped
Soil series mappedUrban land (miscellaneous area) 98 percent
Texture at the surfacevariable 98 percent
Texture about 40 inches downvariable 98 percent
Average clay content about 40 inches down57 percent
Bedrock mapped within 60 inchesNone mapped
Seasonal water table within 60 inches0 percent of the area
Flood prone soils0 percent of the area
High corrosion risk for uncoated steel0 percent of the area
Mapped as urban land (disturbed fill)98 percent of the area

The USDA soil survey does not map bedrock in the top five feet, which does not rule out rock deeper down. Seasonal water tables, flood prone soils and high steel corrosion risk are not mapped in the surveyed area. The geologic map unit is Delta silt and clay, Pleistocene age, with clay and silt deposits. That ground can hold an open hole, but sticky cuttings call for staged reaming and fluid suited to the bore. Main C Canal crossings still need their own route and waterway review.

How is a bore run through Nederland’s variable soil?

Nederland’s soil survey calls the texture variable, with clay averaging 57 percent at about 40 inches. We use the route and exposed ground to guide the bore, rather than treating every street as the same soil.

  1. On an Avenue H route, we use the marked path and exposed ground to set the drilling approach, since Nederland’s mapped soil texture is variable.
  2. Clay averages 57 percent at about 40 inches, so we can adjust fluid and ream in stages if sticky cuttings build up on the tooling.
  3. Before approaching marked lines near US 96, we use hydrovac potholing to expose them; surface marks show position but not depth.
  4. At Main C Canal, we plan the crossing route and check waterway jurisdiction, then track the drill head and log depth and pitch as it advances.
Reel of 4 inch HDPE conduit on the exit side of a 385 foot directional bore under creeks and wetland in Guthrie, Oklahoma
A reel of 4 inch HDPE conduit on the exit side of a 385 foot bore under creeks and wetland in Guthrie, Oklahoma.

What is in the way of a new line near Main C Canal in Nederland?

US 96, US 69 and US 287 each have mapped roadway miles inside Nederland, as do Texas State Highway 347, FM 365 and FM 366. Spur 93 is just outside the limits. Avenue H is the longest named street at 2.72 miles, followed by Nederland Avenue at 2.71 miles and 27th Street at 2.25 miles. A route near these roads may involve pavement, driveways or other utilities, so boring can carry a new line beneath surfaces that should remain uncut.

CrossingTypeMapped extentWho has a say
US 96US highway2.8 roadway miles insideState highway office
US 69US highway2.8 roadway miles insideState highway office
US 287US highway2.8 roadway miles insideState highway office
Texas State Highway 347State highway2.9 roadway miles insideState highway office
FM 365State highway1.3 roadway miles insideState highway office
FM 366State highway0.1 roadway miles insideState highway office
Spur 93Highway nearby0.4 miles outsideState highway office
CPKC (Kansas City Southern)Railroad1.7 track miles insideThe railroad
Union PacificRailroad nearby0.4 miles outsideThe railroad
Main C CanalStream1.87 channel miles insideChecked for Corps of Engineers jurisdiction
Lnva CanalStream1.84 channel miles insideChecked for Corps of Engineers jurisdiction
Rhodair GullyStream1.18 channel miles insideChecked for Corps of Engineers jurisdiction
Port Arthur CanalStream1.05 channel miles insideChecked for Corps of Engineers jurisdiction
Main CanalStream nearbyAlong the boundaryChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

CPKC (Kansas City Southern) has 1.7 track miles inside Nederland, and public mapping shows 6 street and rail crossings. Main C Canal has 1.87 channel miles in the city, while Lnva Canal has 1.84; Rhodair Gully and Port Arthur Canal are also mapped. Public mapping records 35 street crossings of named streams. The nearby Water Tank 14 is outside city limits, so its location does not by itself establish a bore route.

Do I need a permit for a bore in Jefferson County near Nederland?

A bore in the US 96, US 69, US 287, Texas State Highway 347, FM 365 or FM 366 right of way needs a TxDOT utility permit. The TxDOT Beaumont District reviews work in Jefferson County. The utility that owns the line submits its application through TxDOT’s online RULIS system; we prepare the bore plan and profile and work under the permit issued to that owner. Because Nederland is incorporated, we treat its city streets as city owned routes when planning boring work. A crossing of CPKC (Kansas City Southern) track needs that railroad’s agreement, which sets crossing conditions. Main C Canal and other water crossings are checked for U.S. Army Corps of Engineers jurisdiction during planning.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

What is already in the ground near the City of Nederland water system?

The City of Nederland public water system uses surface water and reports 9,553 service connections serving 18,157 people. That system is a key point to consider when planning a water line near Nederland Avenue or another street. Entergy Texas reports electric service in Jefferson County, but that does not identify the provider at every Nederland address. We confirm the line owner before planning an electric conduit bore, including on a route near US 96.

Line ownerWhat it isSourceSize
City of NederlandPublic water systemSurface water9,553 connections, 18,157 people served
Entergy TexasElectric utilities reporting service in Jefferson CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The 2019 to 2023 American Community Survey puts Nederland’s median housing year at 1973, and we consider that age profile when planning underground work. Nederland’s estimates place 20 percent of homes before 1960, 60 percent from 1960 to 1999, and 20 percent in 2000 or later; we factor that age profile into underground planning. A replacement line near Avenue H may have to pass older buried services, while newer construction can call for a new connection. We use hydrovac potholing to expose marked utilities before drilling near them, since locate paint shows position but not depth.

Hydrovac truck and boring equipment staged beside an airport taxiway for utility daylighting in Oklahoma City
Our hydrovac truck and boring equipment beside an airport taxiway in Oklahoma City, set up to expose a utility crossing.

What is near Nederland and Central Gardens?

Nederland is an incorporated city in Jefferson County, covering 5.67 square miles at an elevation of 12 feet. We use Nederland’s ZIP codes, 77627 and 77705, to identify the service area when coordinating boring plans. Central Gardens is 1.8 miles northwest, Beauxart Gardens is 2.1 miles west, and Port Neches is 2.5 miles east. Port Arthur, the nearest larger city, is 8.0 miles southeast; Beaumont, the county seat, is 11.7 miles northwest. From our Yukon, Oklahoma main office, the road trip is 522 miles and 10.3 hours, which affects how we plan mobilization for a Nederland bore.

Places near Nederland

What kinds of bores come up near Avenue H in Nederland?

  • Highway crossing: A bore beneath US 96 can carry a new water line or conduit without cutting the pavement across the route.
  • Water service: A connection near the City of Nederland water system needs a route planned around existing lines along Nederland Avenue.
  • Fiber drop: A fiber route along Avenue H can pass beneath driveways and pavement while keeping those surfaces intact.
  • Canal crossing: A line beneath Main C Canal needs a planned route and a check for U.S. Army Corps of Engineers jurisdiction.
  • Rail crossing: A proposed bore under the CPKC (Kansas City Southern) track needs the railroad’s crossing agreement before the route is set.
  • Utility replacement: Near 27th Street, potholing can expose marked existing lines before a replacement pipe is drilled through the route.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

How do I get a quote for work near CPKC (Kansas City Southern) in Nederland?

For a route near CPKC (Kansas City Southern) or Avenue H, send the address or map pin first. Tell us what will go in the ground, such as a water line or fiber conduit, then give the pipe or conduit size and the footage. A sketch or plans can show how the route meets a street, track or canal.

The 522 road miles from Yukon put mobilization on the list for a Nederland job. Then we look at the clay rich Urban land (miscellaneous area) soil, the length and size of the line, and crossings such as US 96, CPKC (Kansas City Southern) track or Main C Canal. Pavement, utility exposure, pits, excavator time and sand backfill can also shape the work. High profile or emergency timing is another consideration.

Questions people ask about boring in Nederland

Does Trinity Boring Solutions take directional boring jobs in Jefferson County near Nederland?

Yes. We take directional boring work in Nederland and across Texas, planning each route around local street and utility constraints. Our main office is in Yukon, Oklahoma, and vetted partner drilling contractors can provide satellite yard support for work in Jefferson County. You work with Trinity through the project, from the first call to the bore log, regardless of which crew is on site.

Who approves a bore under US 96 in Nederland, and which TxDOT office reviews it?

For work in the US 96 right of way, TxDOT reviews the utility permit through the TxDOT Beaumont District. The utility that owns the line files in RULIS, while we prepare the bore plan and profile and work under the owner’s permit. The same state process applies to the other named state and US highways in Nederland.

What does a bore under CPKC (Kansas City Southern) track in Nederland require?

A crossing under the CPKC (Kansas City Southern) track needs an agreement from the railroad that owns it. That agreement sets crossing conditions, including casing, depth and flagging. With 1.7 track miles mapped in Nederland, a proposed route must be planned around the track and its crossing requirements.

Can a new line be bored under Main C Canal in Nederland?

A bore can be planned beneath Main C Canal, but the route and waterway conditions need review. The canal has 1.87 channel miles in Nederland, and water crossings are checked for U.S. Army Corps of Engineers jurisdiction during planning. We also plan the bore to keep the channel and banks uncut.

Who runs Nederland’s public water system, and where does its water come from for us to plan underground work around it?

The City of Nederland owns the public water system, and its source is surface water. Public records for Nederland list 9,553 service connections and 18,157 people served; we consider that system scale when planning underground work. A proposed water line near Nederland Avenue still needs a route planned around existing utilities.

Which electric provider serves a specific Jefferson County address in Nederland?

Entergy Texas reports electric service in Jefferson County, but that does not establish the provider at every Nederland address. We confirm the line owner for the specific location before planning a conduit bore. For example, the owner should be identified before setting a route near US 96.

Does Trinity cover Central Gardens and rural sites outside Nederland?

Yes. We take work in Texas beyond Nederland, including projects near Central Gardens and rural sites outside the city limits. Central Gardens is 1.8 miles northwest of Nederland, and the crew plan depends on the job location, route and line being installed.

How much notice does Texas811 need before a bore near Avenue H in Nederland?

Count back at least 48 hours from a planned start near Avenue H, excluding Saturdays, Sundays and legal holidays, and make the request no earlier than 14 days ahead. When a Nederland start slips more than 14 days past the original notice, we submit a new request before proceeding. In Nederland, we have worn or moved marks refreshed through Texas811 before continuing work, keeping the marked route current.

What affects the cost of a directional bore near US 96 in Nederland?

The job scope determines the price. For a route near US 96, the drive from Yukon, bore length, pipe size, clay conditions, pavement, utility crossings and potholing all matter. A route under CPKC (Kansas City Southern) track or Main C Canal can add crossing work, while pits and excavator time also affect the plan.

Where the Nederland facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Nederland

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Nederland, Texas

Type the address of your job in Nederland. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Nederland

Same county: Beaumont · Fannett · China · Bevil Oaks · Nome · Taylor Landing · Hamshire. All counties: Texas county list.