trinityboringsolutions.com

Cotulla Texas Directional Boring: Dilley Fine Sandy Loam, Mustang Creek, Union Pacific

Quick Answer: Can we put your line below Interstate 35, Union Pacific track or Mustang Creek without opening the surface? Trinity Boring Solutions does directional boring, also called horizontal directional drilling (HDD), in Cotulla, Texas, for those crossings. Cotulla is 567 road miles from our Yukon, Oklahoma main office, and a route near Front Street affects how we plan mobilization. Dilley fine sandy loam is widely mapped here, so the hole may meet sandy material that needs support as the bore advances.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Cotulla bores at a glance

  • County seat of La Salle County, Texas. Population 3,661 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 567 miles, about 10.9 hours of driving.
  • Ground: Dilley soil is mapped on 48 percent of the area, with bedrock about 40 inches down.
  • Rock: bedrock is mapped within 60 inches on 74 percent of the area.
  • Highways inside the boundary: Interstate 35, Interstate 35 Business, FM 468 and Texas State Highway 97. State permit office: TxDOT Laredo District.
  • Railroad track inside the boundary: Union Pacific, with 12 mapped street and rail crossings.
  • Named streams inside the boundary: Mustang Creek.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who can I call for directional boring near Interstate 35 in Cotulla?

We take directional boring calls for Cotulla, the La Salle County seat, where the Census Bureau Vintage 2024 estimate puts the population at 3,661. A water service can follow a Front Street route, while sewer, gas, electric conduit or fiber may need to pass beneath Interstate 35 or Mustang Creek. The route and line type help us plan the crossing and equipment.

Our main office is in Yukon, Oklahoma, and Cotulla work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. We began directional boring in 1982, four decades of work that matter where Dilley soil and shallow mapped bedrock can change a bore. Trinity is a family business that started in 1965, and you deal with us from the first call through the bore log.

Trinity Boring Solutions Ditch Witch JT922 HDD rig and vacuum excavation truck on a commercial bore in Oklahoma City
Our Ditch Witch JT922 drill and vacuum excavation truck on a commercial bore in Oklahoma City. Photos on this page are from our jobs in Oklahoma and Texas.

What ground does Cotulla’s Dilley soil put under a bore?

The USDA soil survey maps Dilley soil across 48 percent of Cotulla, mostly as Dilley fine sandy loam with gently undulating ground. Duval soil accounts for 23 percent, Poteet for 13 percent and Brystal for 9 percent. At about 40 inches below the surface, the mapped texture is bedrock in 48 percent of the area, sandy clay loam in 47 percent and clay in 5 percent. These are mapped patterns, not test borings, so a route still needs site specific planning.

USDA soil survey, inside the Cotulla city limitsWhat is mapped
Soil series mappedDilley 48 percent, Duval 23 percent, Poteet 13 percent, Brystal 9 percent and Maverick 3 percent
Texture at the surfacefine sandy loam 48 percent, very fine sandy loam 43 percent and clay 4 percent
Texture about 40 inches downbedrock 48 percent, sandy clay loam 47 percent and clay 5 percent
Engineering class about 40 inches downlean clay (CL) 24 percent, clayey sand (SC) 24 percent and fat clay (CH) 4 percent
Average clay content about 40 inches down29 percent
Bedrock mapped within 60 inches74 percent of the area (0 percent hard rock, 74 percent weathered rock)
Seasonal water table within 60 inches0 percent of the area
Flood prone soils14 percent of the area
High corrosion risk for uncoated steel7 percent of the area

The survey maps bedrock within 60 inches in 74 percent of Cotulla, with a typical depth of 28 inches; it is weathered bedrock, not mapped hard bedrock. A bore may slow where the soil meets sandstone, and the drill head needs close steering there. Seasonal water tables are not mapped within 60 inches, while flood prone soils cover 14 percent. The Laredo Formation, an Eocene unit of sandstone and clay, adds another reason to check the actual alignment. High steel corrosion risk is mapped in 7 percent of the area, so casing and tracer wire choices need attention from the line owner.

How do we drill Cotulla where bedrock is mapped shallow?

Cotulla’s Dilley and Duval soils include fine sandy loam and sandy clay loam, with bedrock mapped shallow in many areas. We match the drilling fluid and reaming pace to the ground along each route.

  1. Dilley fine sandy loam can cave behind the bit, so we build support with drilling fluid and ream in stages before pulling pipe.
  2. Where Cotulla’s sandy clay loam holds the hole but sticks to tooling, we adjust fluid and pull the line soon after opening the bore.
  3. With bedrock mapped at a typical depth of 28 inches, we track the drill head from the surface and log depth and pitch as it advances.
  4. Near Mustang Creek or a marked utility on a Baylor Street route, we expose the line first and plan the pits on the dirt beside the crossing.
Rock bit on the drill rod at the front of a Vermeer D24x40 S3 with broken sandstone at the entry of a rock bore in Guthrie, OK
Rock bit on the drill rod with broken sandstone at the entry of a rock bore in Guthrie, Oklahoma.

What is in the way of a new line in Cotulla near Union Pacific?

Interstate 35, Interstate 35 Business, FM 468 and Texas State Highway 97 run within Cotulla, so a route may cross a state controlled right of way as well as local streets. Main Street is the longest named street in the city, followed by Baylor Street and Front Street. Those streets give a practical reference for locating a service route, but the exact crossing point matters. Boring beneath existing highway pavement avoids cutting through the travel surface, and the permit plan must account for the specific highway.

CrossingTypeMapped extentWho has a say
Interstate 35Interstate2.6 roadway miles insideState highway office
Interstate 35 BusinessInterstate1.9 roadway miles insideState highway office
FM 468State highway1.2 roadway miles insideState highway office
Texas State Highway 97State highway0.6 roadway miles insideState highway office
Union PacificRailroad2.6 track miles insideThe railroad
Mustang CreekStream1.45 channel miles insideChecked for Corps of Engineers jurisdiction
Nueces RiverStream nearbyAlong the boundaryChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

Union Pacific has 2.6 track miles inside Cotulla on its Laredo Subdivision, and public mapping shows 12 street and rail crossings. A track bore needs an agreement from Union Pacific, with crossing details set by the railroad. Mustang Creek runs 1.45 channel miles in the city, and six mapped street crossings intersect named streams. The Nueces River touches or follows the city boundary, so a route near either waterway needs crossing review. Around Cotulla, we have no mapped lakes or ponds within one mile.

Who approves a bore in Cotulla and La Salle County?

Cotulla is incorporated, so the city has authority over its streets, including Baylor Street and Front Street. For work within the right of way of Interstate 35, FM 468 or another state highway, the utility owner applies for a TxDOT utility permit through RULIS; TxDOT’s Laredo District reviews it. We prepare the bore plan and profile for the owner’s application and work under the permit issued to that owner. A crossing of Union Pacific track also needs an agreement with the railroad. Mustang Creek and the Nueces River are checked for U.S. Army Corps of Engineers jurisdiction during crossing planning.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Which utilities serve La Salle County and Cotulla?

The water provider for a specific Cotulla address has to be confirmed with the city, La Salle County or the local water district before a bore is planned. A public water system could not be matched to the city in EPA drinking water records, so we cannot identify the provider for an address from those records. AEP Texas Central, Karnes Electric Cooperative and Medina Electric Cooperative report electric service in La Salle County. We confirm the line owner for the route before planning an electric conduit bore.

Line ownerWhat it isSourceSize
AEP Texas Central, Karnes Electric Cooperative and Medina Electric CooperativeElectric utilities reporting service in La Salle CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

For underground planning in Cotulla, we use the 1983 median housing year reported by the American Community Survey 2019 to 2023 five year estimates. In Cotulla, we account for the survey’s housing mix: 29 percent before 1960, 45 percent from 1960 to 1999, and 26 percent in 2000 or later when planning underground work. A replacement route near Main Street may pass older buried services, while newer development can call for new connections. Before drilling near a marked line, we use hydrovac potholing to expose it; paint shows position, not depth.

Reel of yellow polyethylene gas pipe on a trailer staged for a directional bore
A reel of yellow polyethylene gas pipe on a trailer, staged for a directional bore.

What is near Cotulla and Pearsall for a bore project?

Cotulla is the La Salle County seat, at an elevation of 440 feet and within 2.01 square miles. Its ZIP code is 78014. Dilley is 16.4 miles north, Hilltop is 18.2 miles north, Big Wells is 22.3 miles northwest, Catarina is 23.8 miles west and Fowlerton is 26.0 miles east. Pearsall, the nearest larger city, is 32.7 miles north. From Trinity’s Yukon, Oklahoma main office, Cotulla is 567 road miles away and a 10.9 hour drive, which affects mobilization for a project near Interstate 35.

Places near Cotulla

What kinds of bores come up near Baylor Street in Cotulla?

  • Highway crossing: A route beneath Interstate 35 is bored under the pavement, with the utility owner’s TxDOT permit plan covering the highway right of way.
  • Water service: A connection near Front Street starts with confirming the provider for that address before setting the bore route.
  • Fiber conduit: A fiber route along Main Street needs marked utilities exposed before the drill approaches existing services.
  • Creek crossing: A line beneath Mustang Creek can leave the channel banks uncut, with the crossing checked for federal jurisdiction during planning.
  • Rail crossing: A bore beneath Union Pacific track follows the railroad’s agreement for the Laredo Subdivision crossing.
  • Street replacement: A sewer or water replacement near Baylor Street can pass below the street surface instead of opening a trench through it.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What do you need to quote a bore near Tilden Street in Cotulla?

Send a map pin for the exact spot, because a route near Tilden Street differs from one aimed beneath Mustang Creek or Interstate 35. For a Cotulla bore, what will go underground, what pipe or conduit size are we installing, and what footage should we plan? A sketch or plans help us see the approach, crossing points and space for the entry and exit pits.

The 567 road miles from Yukon are part of mobilization for a Cotulla job. Ground conditions matter too: Dilley soil and mapped shallow bedrock can change drilling pace and tooling. Price also reflects bore length, pipe size, utility crossings, pavement, creek or drainage crossings, pit work, excavator time and sand backfill. A crossing at Union Pacific track needs its own coordination, while a high profile or emergency schedule changes the work plan. The map pin helps us identify which of these details apply.

Questions people ask about boring in Cotulla

Does Trinity Boring Solutions take jobs in Cotulla and La Salle County, and who staffs them?

Yes. We take directional boring work in Cotulla, and the job is handled by our own crews or crews from partner drilling contractors we have vetted. The Yukon office remains your contact through the bore log, whether the work is near Front Street or Mustang Creek.

What does a Cotulla bore beneath Union Pacific track require?

A bore beneath Union Pacific track needs an agreement from the railroad that owns it. For Cotulla crossings, we follow the agreement’s conditions for casing, depth and flagging before boring. Cotulla has 2.6 track miles on the Union Pacific Laredo Subdivision, so the crossing point belongs in the plans.

Can a line be bored under Mustang Creek in Cotulla?

It may be possible to bore beneath Mustang Creek without cutting the channel, depending on the route and site conditions. The creek has 1.45 channel miles in Cotulla. During planning, the crossing is checked for U.S. Army Corps of Engineers jurisdiction, and the drill path is planned around the channel.

Who owns electric lines in Cotulla and La Salle County, and who confirms conduit specs?

AEP Texas Central, Karnes Electric Cooperative and Medina Electric Cooperative report electric service in La Salle County, but that does not identify the owner at every Cotulla address. The line owner needs to be confirmed before planning a conduit bore. That owner can confirm the required conduit details for a route near Baylor Street.

Can I bore under Front Street in Cotulla without cutting it, and who controls the street?

Since Cotulla is incorporated, we treat its city streets as city property when planning a bore. A bore can pass beneath Front Street without an open cut, subject to the route and approvals for the work. If the alignment reaches Interstate 35, the state highway right of way has a separate TxDOT permit process.

What do Cotulla homes near Baylor Street mean for replacing buried lines?

Cotulla’s median housing year is 1983, according to American Community Survey 2019 to 2023 five year estimates. Older homes near Baylor Street may have existing services along a replacement route, while newer homes may need a new connection. On Cotulla work, we expose marked utilities before drilling close to them.

Does Pearsall’s distance from Cotulla affect a bore job from Yukon?

Pearsall is 32.7 miles north of Cotulla, while Cotulla is 567 road miles from our Yukon, Oklahoma main office. That travel distance affects mobilization, so it belongs in the project scope alongside ground conditions near Dilley soil or a crossing of Mustang Creek.

How much notice does Texas811 need for a Cotulla bore near Main Street?

Count back at least 48 hours from the planned start, excluding Saturdays, Sundays and legal holidays. A Texas811 request cannot be made more than 14 days before excavation. If a Main Street bore starts more than 14 days after the original notice, a new request is needed. For Cotulla work, we have worn or moved marks refreshed through Texas811 before we continue.

What affects the cost of a directional bore near Interstate 35 in Cotulla?

The job route and scope determine the price, not just the footage. A Cotulla estimate accounts for the drive from Yukon, Dilley soil and shallow mapped bedrock, pipe size, crossings of Interstate 35 or Union Pacific track, pavement, pits and access. Creek crossings, excavator time and emergency timing can also change the work required.

Where the Cotulla facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Cotulla

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Cotulla, Texas

Type the address of your job in Cotulla. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Cotulla

Same county: Encinal. All counties: Texas county list.