Denison Texas Directional Boring: Crosstell Soil, Sand Creek and Union Pacific
Quick Answer: Can your line pass beneath a Denison road, track or creek without cutting the surface? We use directional boring, also called horizontal directional drilling (HDD), for routes beneath US 75, Union Pacific track or Sand Creek in Denison, Texas. Denison is 186 road miles from our Yukon, Oklahoma main office, a distance we account for when planning work near Eisenhower Parkway. The USDA survey maps heavy clay across 48 percent of the area at 40 inches, so sticky cuttings and pressure control shape the bore.
Denison bores at a glance
- Incorporated city in Grayson County, Texas. Population 26,446 (Census Bureau 2024 estimate).
- Road distance from our Yukon, Oklahoma main office: 186 miles, about 3.8 hours of driving.
- Ground: Crosstell soil is mapped on 14 percent of the area, with clay about 40 inches down.
- Rock: bedrock is mapped within 60 inches on 50 percent of the area.
- Highways inside the boundary: US 75, US 69, Texas State Highway 91, FM 120 and FM 84. State permit office: TxDOT Paris District.
- Railroad track inside the boundary: Union Pacific, Texas Northeastern Railroad and BNSF Railway, with 46 mapped street and rail crossings.
- Named streams inside the boundary: Sand Creek, Iron Ore Creek, Loy Creek and Duck Creek.
- Public water: City of Denison, surface water.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Who does directional boring in Denison and Grayson County?
Can your line pass beneath a Denison street, highway or creek without cutting the surface? We take directional boring work in Denison, Grayson County, where the Census Bureau Vintage 2024 estimate puts the population at 26,446. We install water and sewer lines, gas lines, electric conduit and fiber, including routes beneath Eisenhower Parkway or toward Sand Creek where an open cut would disrupt the crossing.
Our main office is in Yukon, Oklahoma, and Denison work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our range runs from a 3/4 inch service line near Sand Creek to 48 inch casing for a major crossing such as US 75. The family business began in 1965, and we have done directional boring since 1982.

What does the soil survey show about Denison and Crosstell soil?
The USDA soil survey maps Crosstell as 14 percent of Denison’s soil series. Crosstell fine sandy loam with 2 to 5 percent slopes, eroded, covers 4 percent of the mapped area. At about 40 inches below the surface, clay is the leading texture at 34 percent, while the average clay content is 43 percent and only 1 percent of the area is mapped as sandy. Heavy clay is mapped across 48 percent at that depth. For Denison planning, we treat mapped patterns as guides, not as test borings. For a bore near Sand Creek, sticky clay can build up on the reamer and grip the pipe.
| USDA soil survey, inside the Denison city limits | What is mapped |
|---|---|
| Soil series mapped | Crosstell 14 percent, Gasil 13 percent, Sanger 11 percent, Bolar 7 percent and Aubrey 7 percent |
| Texture at the surface | fine sandy loam 28 percent, clay 16 percent and loamy fine sand 14 percent |
| Texture about 40 inches down | clay 34 percent, bedrock 22 percent and sandy clay loam 16 percent |
| Engineering class about 40 inches down | fat clay (CH) 42 percent and lean clay (CL) 26 percent |
| Average clay content about 40 inches down | 43 percent |
| Bedrock mapped within 60 inches | 50 percent of the area (15 percent hard rock, 35 percent weathered rock) |
| Seasonal water table within 60 inches | 1 percent of the area |
| Flood prone soils | 9 percent of the area |
| High corrosion risk for uncoated steel | 60 percent of the area |
| Mapped as urban land (disturbed fill) | 5 percent of the area |
The USDA soil survey maps bedrock within 60 inches across 50 percent of Denison, with typical depth at 37 inches; 15 percent is mapped as hard bedrock and 35 percent as weathered bedrock. That mix can mean slower drilling or a change in steering at the soil and rock contact. Seasonal water within 60 inches is mapped in 1 percent, while flood prone soils cover 9 percent, so Sand Creek needs its own depth and crossing review. The Cenozoic Stony Calcareous Clay Solution Residuum includes clay, chalk, limestone and shale. Steel corrosion risk is high across 60 percent, a material choice for the line owner to consider.
How do we bore Denison clay without losing control?
Denison’s mapped clay and shallow bedrock call for a bore plan that fits the route, not just the pipe. Near Sand Creek or Eisenhower Parkway, we track the drill head and adjust the work to the ground we encounter.
- With heavy clay mapped across 48 percent of Denison at 40 inches, we manage fluid returns, ream in stages and keep the pipe ready to limit the time an open hole can grip it.
- Bedrock is mapped within 60 inches across half the city, so near Eisenhower Parkway we track depth and pitch as the drill approaches a soil and rock boundary.
- Where flood prone soils meet Sand Creek, we plan the bore to pass beneath the channel and check the crossing for U.S. Army Corps of Engineers jurisdiction.
- Before drilling near a marked line on Morton Street, we use hydrovac potholing to expose it; a surface mark shows location, not depth.

Where does a line have to go under Sand Creek in Denison?
US 75, US 69, Texas State Highway 91 and FM 120 are among the highways mapped inside Denison, with Texas State Highway 289 just 0.1 miles outside the limits. A highway route may need a TxDOT utility permit as well as a bore profile. Eisenhower Parkway runs 8.77 miles in the city, while Crawford Street runs 4.51 miles and Texoma Drive runs 4.26 miles. Morton Street adds another long route. These busy corridors make an underground crossing useful when the line can pass below pavement instead of cutting across it.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| US 75 | US highway | 19.5 roadway miles inside | State highway office |
| US 69 | US highway | 13.6 roadway miles inside | State highway office |
| Texas State Highway 91 | State highway | 16.9 roadway miles inside | State highway office |
| FM 120 | State highway | 13.1 roadway miles inside | State highway office |
| FM 84 | State highway | 7.7 roadway miles inside | State highway office |
| Spur 503 | State highway | 7.2 roadway miles inside | State highway office |
| FM 131 | State highway | 5 roadway miles inside | State highway office |
| FM 691 | State highway | 2.1 roadway miles inside | State highway office |
| FM 1417 | State highway | 1.9 roadway miles inside | State highway office |
| FM 406 | State highway | 1.1 roadway miles inside | State highway office |
| Texas State Highway 75 | State highway | 0.2 roadway miles inside | State highway office |
| Texas State Highway 289 | Highway nearby | 0.1 miles outside | State highway office |
| Texas State Highway 75 Alternate | Highway nearby | 0.4 miles outside | State highway office |
| Union Pacific | Railroad | 7.5 track miles inside | The railroad |
Union Pacific has 7.5 track miles in Denison; Texas Northeastern Railroad has 5.83 and BNSF Railway has 3.7. Public mapping counts 46 street and rail crossings in the city, so a route needs to be checked against the specific track owner. Sand Creek runs 3.14 channel miles, and 22 street crossings of named streams are mapped. Iron Ore Creek and Loy Creek also cross the city. A creek or lake route needs depth planning, and Sand Creek is checked for U.S. Army Corps of Engineers jurisdiction during planning.
Do I need a permit for a Denison bore near Union Pacific?
In incorporated Denison, we account for city ownership when planning crossings beneath its streets. For work in the right of way of US 75, US 69 or a state highway, farm to market or ranch to market road, the utility owner files the TxDOT utility permit through RULIS; we give that owner the bore plan and profile. TxDOT’s Paris District reviews the application. At highway crossings, electric and communication lines need 60 inches of cover, water needs 60 inches and pressurized sewer needs 60 inches. Union Pacific track work needs an agreement from the railroad that owns the track. A Sand Creek crossing is checked for federal waterway jurisdiction during planning.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
When we plan crossings near Denison’s City of Denison water system, who owns the lines?
The City of Denison public water system uses surface water and reports 17,626 service connections serving 27,500 people. That tells us the system is substantial, but the line owner still needs to be confirmed for a route near Eisenhower Parkway. Electric service reported in Grayson County includes Oncor Electric Delivery Company, Texas-New Mexico Power, Cooke County Electric Cooperative Association, Denton County Electric Cooperative, Fannin County Electric Cooperative and Grayson-Collin Electric Cooperative. We confirm the owner for the specific address before planning an electric conduit bore.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| City of Denison | Public water system | Surface water | 17,626 connections, 27,500 people served |
| Oncor Electric Delivery Company, Texas-New Mexico Power, Cooke County Electric Cooperative Association, Denton County Electric Cooperative, Fannin County Electric Cooperative and Grayson-Collin Electric Cooperative | Electric utilities reporting service in Grayson County | EIA Form 861 | Confirm the line owner by address |
The American Community Survey 2019 to 2023 five year estimates put Denison’s median housing year at 1967; 36 percent of housing units were built before 1960, and 16 percent in 2000 or later. That mix can mean either an older line replacement or a new service near Morton Street. Before drilling near a marked utility, we hydrovac pothole it to see its depth and position. Locate paint alone does not show how deep the line sits.

How far is Denison from Knollwood and our Yukon yard?
Denison is an incorporated city in Grayson County, with 29.02 square miles of land at an elevation of 808 feet. The city’s ZIP codes are 75020 and 75021. Knollwood is 5.8 miles south, Pottsboro is 5.2 miles west and Sherman, the county seat, is 9.9 miles south. McKinney is the nearest larger city listed, 39.4 miles south. Our Yukon, Oklahoma main office is 186 road miles away, a 3.8 hour drive. That distance matters when we schedule equipment and crews for a bore along US 75 or near Sand Creek.
Places near Denison
- Directional boring in Pottsboro: 5.2 miles west
- Directional boring in Knollwood: 5.8 miles south
- Directional boring in Preston: 8.3 miles northwest
- Directional boring in Sherman: 9.9 miles south
- Directional boring in Southmayd: 12.4 miles southwest
- Directional boring in McKinney: 39.4 miles south
What kinds of bores come up along Eisenhower Parkway in Denison?
- Highway crossing: A route beneath US 75 can avoid cutting the pavement, with the bore plan shaped for the specific right of way.
- Water service: A service near Eisenhower Parkway can be bored beneath the street instead of opened across the roadway.
- Fiber conduit: A conduit route along Texoma Drive can pass below pavement and marked utilities after the line path is checked.
- Creek crossing: A Sand Creek bore needs a planned depth beneath the channel and a review for federal waterway jurisdiction.
- Rail crossing: A bore beneath Union Pacific track requires an agreement with the track owner before the crossing is planned.
- Water line: Work near the City of Denison system starts by confirming the line owner and mapping the route around existing utilities.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
What drives the price of a Denison bore near Morton Street?
For a Denison quote, send the address or map pin, what will go in the ground, the pipe or conduit size and footage; a sketch or plans help us follow the route near Morton Street. Those details show where the bore starts and ends, what it must carry and which local crossings need to be checked before we set the scope.
Ground conditions are one part of the price: heavy clay mapped around Denison can cling to the reamer, and shallow bedrock can slow the route. Crossings add work when a plan runs beneath US 75, Union Pacific track or Sand Creek, especially if utilities must be exposed or pavement and concrete are involved. Pits, excavator time and sand backfill also affect the job. Logistics matter too: Denison is 186 road miles from Yukon, and high profile or emergency work can change mobilization and planning needs.
Questions people ask about boring in Denison
Does Trinity take directional boring jobs in Denison and Grayson County?
Yes. We take work in Denison and across Texas, and Trinity stays responsible for the job from the first call through the bore log. Our own crews and vetted partner drilling contractors support work near Grayson County streets and crossings. You coordinate with Trinity whichever crew is at the site.
Who approves a Denison bore under US 75, and which state office reviews it?
The utility owner submits the TxDOT utility permit application through RULIS, and TxDOT’s Paris District reviews it. We prepare the bore plan and profile for that application. A route under US 75 must follow the permit conditions for cover and installation, so the line owner needs to start that process.
For a Denison bore beneath Union Pacific track, what does the railroad require before we plan the crossing?
A crossing beneath Union Pacific track needs an agreement from Union Pacific, the railroad that owns the track. Its terms set the crossing conditions, including casing, depth and flagging. Denison also has Texas Northeastern Railroad and BNSF Railway track, so identify the owner at the exact crossing before planning.
Can you bore a line beneath Sand Creek in Denison?
A bore beneath Sand Creek can be planned, but the route needs a suitable depth beneath the channel. When we plan a Denison crossing, we check whether the US Army Corps of Engineers has jurisdiction. The creek runs 3.14 channel miles in Denison, and flood prone soils cover 9 percent of the mapped area.
As we plan underground work in Denison, who runs the public water system and where does its water come from?
For underground work in Denison, we account for the City of Denison owning its public water system and using surface water. It reports 17,626 service connections and 27,500 people served. For a bore near Eisenhower Parkway, confirm which water line is present and who owns it before setting the route.
Which electric line owner serves my Denison address in Grayson County?
Oncor Electric Delivery Company, Texas-New Mexico Power and several cooperatives report electric service in Grayson County. Those reports do not identify the provider at every Denison address. Confirm the line owner at the job location before planning a conduit bore near Morton Street.
Does Trinity cover Pottsboro and rural sites outside Denison?
Yes. We take work across Texas, including projects around Pottsboro and rural locations beyond Denison’s city limits. Pottsboro is 5.2 miles west of Denison, but each route still needs its own address, ground review and crossing plan, especially near Sand Creek or a highway.
How much notice does Texas811 need for a Denison bore near Eisenhower Parkway?
Count back at least 48 hours of working time from the planned start, excluding Saturdays, Sundays and legal holidays. Texas811 allows a request no earlier than 14 days before excavation; the ticket has a 20 day life. If an Eisenhower Parkway start slips more than 14 days past the original notice, make a new request. Refresh worn or moved marks through Texas811 before work resumes.
What affects the cost of a directional bore under US 75 in Denison as we plan the crossing?
The route and scope drive the price. For a US 75 crossing, length, pipe size, soil and rock, the number of utilities to expose, pavement, pits and excavator time all matter. A Sand Creek crossing can add planning, while Denison’s 186 road miles from Yukon affects mobilization. High profile or emergency work also changes the job requirements.
Where the Denison facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside Denison
- U.S. Census Bureau, TIGER/Line 2024: Denison boundary, roads, rail lines and streams
- U.S. Census Bureau, Vintage 2024 population estimates: Denison
- U.S. Census Bureau, American Community Survey 2019 to 2023: Denison housing units and year built
- Macrostrat geologic map compilation: map units under Denison
- U.S. EPA Safe Drinking Water Information System: public water systems serving Denison
- U.S. Department of Transportation, North American Rail Network: track owners in Grayson County
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving Grayson County
- U.S. Geological Survey, Elevation Point Query Service: Denison elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to Denison
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in Denison
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in Denison, Texas
Type the address of your job in Denison. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
County and State Pages for Denison
Same county: Van Alstyne · Whitesboro · Howe · Gunter · Collinsville · Whitewright · Bells · Tioga · Sherwood Shores · Tom Bean · Sadler · Dorchester. All counties: Texas county list.
