trinityboringsolutions.com

Tom Bean Texas Directional Boring: Whitewright Soil, Texas State Highway 11 and West Fork

Quick Answer: At Ball Street, what does the top five feet of ground look like? The USDA soil survey maps weathered bedrock within that depth across much of Tom Bean. Trinity Boring Solutions takes directional boring, also called horizontal directional drilling (HDD), work for routes near West Fork and Texas State Highway 11. Tom Bean is 193 road miles from our Yukon yard, with FM 2729 among the local routes. Whitewright silty clay can stick to a reamer, so the drilling plan accounts for clay behavior.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Tom Bean bores at a glance

  • Incorporated city in Grayson County, Texas. Population 950 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 193 miles, about 4 hours of driving.
  • Ground: Whitewright soil is mapped on 46 percent of the area, with bedrock about 40 inches down.
  • Rock: bedrock is mapped within 60 inches on 97 percent of the area.
  • Highways inside the boundary: Texas State Highway 11, FM 2729 and FM 902. State permit office: TxDOT Paris District.
  • Railroad track inside the boundary: none mapped.
  • Named streams inside the boundary: West Fork.
  • Public water: City of Tom Bean, groundwater wells.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who can I call for directional boring near West Fork in Tom Bean?

What does the top five feet look like beneath Bonham Street? The USDA soil survey maps Whitewright silty clay loam and weathered bedrock in Tom Bean. Trinity Boring Solutions takes work in Grayson County, where the Census Bureau Vintage 2024 estimate puts the population at 950. Water, sewer, gas, electric conduit and fiber lines can be bored along routes such as Bonham Street, subject to the site plan and utility locations.

Our main office is in Yukon, Oklahoma, and Tom Bean work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our family business began in 1965, and we have done directional boring since 1982, with Tom Bean 193 road miles from our Yukon main office. For a service route near Texas State Highway 11, our range runs from 3/4 inch service lines to 48 inch casing, with the job plan setting the fit.

Ditch Witch JT922 compact directional drill beside the Trinity Boring Solutions truck at NE 24th Street in Oklahoma City
Our Ditch Witch JT922 compact directional drill beside the Trinity truck on a sleeve bore at NE 24th Street in Oklahoma City. Photos on this page are from our jobs in Oklahoma and Texas.

What does the USDA soil survey show about Whitewright soil in Tom Bean?

Whitewright is the leading mapped soil series in Tom Bean at 46 percent, followed by Austin at 22 percent and Fairlie at 20 percent. Surface texture is mapped as silty clay loam across 46 percent of the city and silty clay across 25 percent. At about 40 inches below the surface, the survey maps bedrock across 78 percent and clay across 20 percent. Average clay content at that depth is 45 percent. These are mapped patterns, not test borings; the Whitewright clay can stick to the reamer and grip pipe.

USDA soil survey, inside the Tom Bean city limitsWhat is mapped
Soil series mappedWhitewright 46 percent, Austin 22 percent, Fairlie 20 percent and Eddy 9 percent
Texture at the surfacesilty clay loam 46 percent, silty clay 25 percent and clay 20 percent
Texture about 40 inches downbedrock 78 percent and clay 20 percent
Engineering class about 40 inches downfat clay (CH) 22 percent
Average clay content about 40 inches down45 percent
Bedrock mapped within 60 inches97 percent of the area (0 percent hard rock, 97 percent weathered rock)
Seasonal water table within 60 inches0 percent of the area
Flood prone soils0 percent of the area
High corrosion risk for uncoated steel91 percent of the area

The USDA soil survey maps bedrock within 60 inches across 97 percent of Tom Bean, and the mapped bedrock there is weathered rather than hard. Seasonal water table and flood prone soils are not mapped in that depth range. High steel corrosion risk is mapped across 91 percent, a concern for uncoated casing or tracer wire that the line owner should address. The geologic map includes Silty Clay Decomposition Residuum of Cenozoic age and Austin Chalk of Late Cretaceous age, so the bore plan must allow for changing ground.

How do we bore Tom Bean ground with shallow bedrock?

On a route near Ball Street, the USDA survey points to clay above weathered bedrock, not a uniform layer of easy drilling. We match fluid, reaming and pipe timing to the ground the bore encounters.

  1. Whitewright soil is clay rich, so we use a thinner fluid and polymer, ream in stages and plan to pull pipe the day the hole is opened.
  2. With bedrock mapped within 60 inches across 97 percent of Tom Bean, we allow for slower drilling through weathered rock and watch the soil to rock transition.
  3. On a route near Texas State Highway 11, we keep fluid pressure low under pavement and watch returns so drilling pressure does not lift the surface.
  4. Before drilling near a marked line along Luby Drive, we hydrovac pothole it; a walkover locator tracks the head while we log depth and pitch.
Rod box on the Vermeer D24x40 S3 Navigator with the bore path heading toward the trees on a rock bore in Guthrie, OK
Rod box on our Vermeer D24x40 with the bore path heading toward the trees on a rock bore in Guthrie, Oklahoma.

What could a new line cross on Ball Street in Tom Bean?

Texas State Highway 11 runs 2.5 mapped roadway miles inside Tom Bean, while FM 2729 accounts for 1.3 miles and FM 902 for 0.2 miles. There are no mapped highways within 1.5 miles outside the limits. Ball Street is the longest named street at 0.95 miles in the city, followed by Bonham Street at 0.73 miles and Lyon Street at 0.69 miles. An existing highway pavement crossing is bored or tunneled rather than open cut, and the route needs to account for the right of way.

CrossingTypeMapped extentWho has a say
Texas State Highway 11State highway2.5 roadway miles insideState highway office
FM 2729State highway1.3 roadway miles insideState highway office
FM 902State highway0.2 roadway miles insideState highway office
West ForkStream0.32 channel miles insideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

No railroad is mapped inside Tom Bean or within one mile outside it, and no street and rail crossing is mapped in the city. West Fork runs 0.32 channel miles inside the limits, with one mapped street crossing of a named stream. West Fork is within Tom Bean limits, so we check its location separately; no lakes or ponds are mapped within one mile. A proposed bore near West Fork needs a channel specific plan, and the crossing is checked for U.S. Army Corps of Engineers jurisdiction during planning.

Who approves a Tom Bean bore in Grayson County?

For a bore in a city street such as Ball Street, the street belongs to the City of Tom Bean; the city is incorporated. Work in the right of way of Texas State Highway 11, FM 2729 or FM 902 needs a TxDOT utility permit. The line owner, not the drilling contractor, submits through TxDOT’s RULIS system, and the TxDOT Paris District reviews it. We prepare the bore plan and profile for the owner to use. On highway crossings, cover depends on line type: electric and communication lines need 60 inches, and water lines need 60 inches. Pressurized sewer lines also need 60 inches at crossings. West Fork is checked for federal jurisdiction during planning.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Who owns the water lines in Tom Bean near the City of Tom Bean system?

The City of Tom Bean public water system draws from groundwater wells and lists 552 service connections serving 799 people. That identifies the public system, but a particular service route near Texas State Highway 11 still needs its line owner confirmed. County electric service reporting includes Oncor Electric Delivery Company, Texas New Mexico Power, Cooke County Electric Cooperative Association, Denton County Electric Cooperative, Fannin County Electric Cooperative and Grayson Collin Electric Cooperative. We confirm the line owner for an electric conduit route before planning the bore.

Line ownerWhat it isSourceSize
City of Tom BeanPublic water systemGroundwater wells552 connections, 799 people served
Oncor Electric Delivery Company, Texas-New Mexico Power, Cooke County Electric Cooperative Association, Denton County Electric Cooperative, Fannin County Electric Cooperative and Grayson-Collin Electric CooperativeElectric utilities reporting service in Grayson CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put Tom Bean’s median housing year at 1975; 14 percent of units were built before 1960, 78 percent from 1960 to 1999 and 8 percent in 2000 or later. A line along Luby Drive may serve an older home or a newer connection, so the route and existing utilities matter. We hydrovac pothole marked lines on the bore path before drilling near them; paint marks position, not depth.

Reel of yellow polyethylene gas pipe on a trailer staged for a directional bore
A reel of yellow polyethylene gas pipe on a trailer, staged for a directional bore.

How far is Tom Bean from Van Alstyne and our Yukon yard?

Tom Bean is an incorporated city in Grayson County, at an elevation of 821 feet and covering 1.45 square miles. For underground planning near Whitewright, Tom Bean uses ZIP codes 75489, 75090 and 75491. Whitewright is 5.2 miles east, Howe is 7.6 miles west, and Bells is 7.8 miles northeast. Van Alstyne, the nearest larger city, is 8.9 miles southwest; Sherman, the county seat, is 11.1 miles northwest. The Yukon yard is 193 road miles away, about a 4.0 hour drive, which is part of planning mobilization for a Tom Bean job.

Places near Tom Bean

What boring work comes up on Bonham Street in Tom Bean?

  • Highway crossing: A route beneath Texas State Highway 11 needs a bored or tunneled crossing plan that accounts for the highway right of way.
  • Water service: A service line near the City of Tom Bean system starts with confirming the line owner and planning around groundwater supplied connections.
  • Fiber route: A conduit run along Ball Street needs marked utilities exposed before the drill gets close to them.
  • Creek crossing: A proposed route at West Fork needs depth planning under the channel and a check for federal jurisdiction.
  • Street route: A sewer or water bore along Bonham Street can avoid opening the pavement, with entry and exit pits placed in dirt.
  • FM crossing: A route under FM 2729 needs a TxDOT utility permit when it occupies the highway right of way.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What should I send for a Tom Bean bore near Luby Drive?

For a bore near Luby Drive, send the address or map pin, what is going in the ground, the pipe or conduit size and the footage; a sketch or plans help us read the route against nearby streets and utilities. That gives us a starting scope for a Tom Bean estimate without assuming the route is clear.

The job details set the price, not footage alone. Ground factors include Whitewright clay and the mapped weathered bedrock; crossing factors include pavement, marked utilities and a possible West Fork route. Logistics include pits, excavator time, sand backfill and mobilization from the Yukon yard, 193 road miles away. A route involving Texas State Highway 11 or emergency timing can add planning demands. The actual scope around Ball Street and other crossings determines what equipment and work the job calls for.

Questions people ask about boring in Tom Bean

Does Trinity take directional boring jobs in Tom Bean and Grayson County?

Yes. Trinity Boring Solutions takes work in Tom Bean and across Texas. The project is handled through our team from the first call through the bore log, whether our own crews or a vetted partner contractor crew is on site. For a route near Ball Street, the site plan and utility marks shape the work.

What ground should I expect in Tom Bean Whitewright soil?

The USDA soil survey maps Whitewright as 46 percent of Tom Bean, with silty clay loam common at the surface. At about 40 inches down, bedrock is mapped across 78 percent and clay across 20 percent. Clay can ball up on a reamer, so staged reaming and fluid control matter for a bore near Bonham Street.

Is bedrock mapped under Tom Bean, and is it hard?

Yes, bedrock is mapped within five feet across 97 percent of Tom Bean, but the survey classifies it as weathered, not hard bedrock. Whitewright and Austin soils also show clay in the profile. A route near Luby Drive may encounter slower drilling at the soil and rock transition, so the plan should allow for that change.

Does the TxDOT Paris District handle Texas State Highway 11 bores in Tom Bean?

The line owner applies for the TxDOT utility permit through RULIS, and the TxDOT Paris District reviews it. For Texas State Highway 11, we prepare the bore plan and profile for the owner. The permit covers crossing details, including required cover, and highway pavement is bored or tunneled rather than open cut.

Can a line be bored under West Fork in Tom Bean?

A bore can be planned for a West Fork crossing, but the route and depth need to suit the channel. West Fork runs 0.32 channel miles inside Tom Bean, and one street crossing of a named stream is mapped. In Grayson County, we check each planned crossing for US Army Corps of Engineers jurisdiction before boring.

Who runs the public water system in Tom Bean?

The City of Tom Bean owns the public water system, which uses groundwater wells. It lists 552 service connections serving 799 people. A proposed connection near FM 902 still needs the specific line owner confirmed, since system records do not establish who owns every line along a particular bore route.

Does Trinity cover Whitewright soil areas and rural sites near Tom Bean?

Yes. Trinity takes work around Whitewright, 5.2 miles east of Tom Bean, as well as rural sites outside the city limits. The Whitewright soil series is also mapped across 46 percent of Tom Bean, so clay behavior may matter on routes near Ball Street or beyond town.

How much 811 notice is needed for a bore near Ball Street in Tom Bean?

For a Ball Street bore, Texas law requires a Texas811 locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days ahead. For a planned crossing near Ball Street, if the start moves more than 14 days past the original notice, we make a new request. On Franklin Road, we have worn or moved marks refreshed through Texas811 before continuing work.

What affects the cost of a directional bore near Texas State Highway 11 in Tom Bean?

Length, pipe or conduit size, Whitewright clay, weathered bedrock, pavement and utility crossings all affect the scope. A Texas State Highway 11 crossing brings permit planning, while a West Fork route may add channel work. Pit and excavator needs, backfill, timing and mobilization from the Yukon yard also factor into the job.

Where the Tom Bean facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Tom Bean

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Tom Bean, Texas

Type the address of your job in Tom Bean. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Tom Bean

Same county: Sherman · Denison · Whitesboro · Pottsboro · Gunter · Preston · Collinsville · Tioga · Sherwood Shores · Southmayd · Knollwood · Sadler. All counties: Texas county list.