Preston Texas Directional Boring: Konsil Soil, FM 120 and Lake Texoma
Quick Answer: At 189 road miles from our Yukon main office, our crews take directional boring, also called horizontal directional drilling (HDD), work across Preston, including FM 120 crossings planned to avoid pavement cuts. USDA maps Konsil soil here, and sandy clay loam about 40 inches down can cling to tooling and call for controlled reaming. Preston Bend Road is one local route where exact alignment affects utility checks. Preston’s soil maps guide planning, not replace a test boring.
Preston bores at a glance
- Unincorporated community in Grayson County, Texas. Population 2,101 (2020 Census count).
- Road distance from our Yukon, Oklahoma main office: 189 miles, about 3.8 hours of driving.
- Ground: Konsil soil is mapped on 18 percent of the area, with sandy clay loam about 40 inches down.
- Rock: bedrock is mapped within 60 inches on 32 percent of the area.
- Highways inside the boundary: FM 120 and Texas State Highway 289. State permit office: TxDOT Paris District.
- Railroad track inside the boundary: none mapped.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Who handles directional boring near FM 120 in Preston?
From our Yukon main office, Preston is 189 road miles away; our own crews and vetted partner contractor yards staff the work, including projects around FM 120. The Census Bureau counted 2,101 people in Preston in the 2020 Census, and we install water, sewer, gas, electric conduit and fiber along streets such as Highport Road when the route and owner plans call for them.
Our main office is in Yukon, Oklahoma, and Preston work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Near streets such as Preston Bend Road, the work can range from a 3/4 inch service line to a 48 inch casing, with bore lengths from 10 feet to 5,000 feet. Our family business started in 1965, and we have done directional boring since 1982; Preston is 189 road miles from our Yukon main office.

What is Konsil soil like to bore in Preston?
Konsil is the most common named soil series in Preston, covering 18% of the mapped area. The USDA soil survey maps Konsil fine sandy loam on 9% of the area at 5 to 8 percent slopes and on 8% at 2 to 5 percent slopes. About 40 inches below the surface, sandy clay loam is mapped under 24% of the area, while clay is mapped under 11%. The mapped average clay content at that depth is 35%. These are soil patterns, not test borings. Clay can cling to the reamer, so the actual route matters.
| USDA soil survey, inside the Preston mapped community boundary | What is mapped |
|---|---|
| Soil series mapped | Konsil 18 percent, Aubrey 10 percent, Bolar 8 percent, Crosstell 6 percent and Bastrop 5 percent |
| Texture at the surface | fine sandy loam 34 percent, loam 8 percent and clay loam 6 percent |
| Texture about 40 inches down | sandy clay loam 24 percent, bedrock 22 percent and clay 11 percent |
| Engineering class about 40 inches down | lean clay (CL) 25 percent and fat clay (CH) 14 percent |
| Average clay content about 40 inches down | 35 percent |
| Bedrock mapped within 60 inches | 32 percent of the area (12 percent hard rock, 20 percent weathered rock) |
| Seasonal water table within 60 inches | 0 percent of the area |
| Flood prone soils | 0 percent of the area |
| High corrosion risk for uncoated steel | 26 percent of the area |
The USDA soil survey places bedrock within 60 inches across 32% of Preston, with a typical depth of 32 inches; some mapped rock is weathered and some is hard. Antlers Sand, an Aptian geologic unit, includes sand and clay, so a bore may meet changing ground. Seasonal water tables within 60 inches and flood prone soils are not mapped. High steel corrosion risk covers 26% of the area, which makes casing and tracer wire material a line owner decision. The survey also maps high concrete corrosion risk under 11%, relevant to any concrete near a bore.
How do we bore through Preston’s sandy clay loam?
On Preston routes with sandy clay loam below the surface and Konsil soil above it, we set the drilling plan to the ground we encounter. The USDA soil map guides that plan, but it does not replace checking the bore path.
- In Konsil soil, we can use thinner drilling fluid with polymer and ream in stages so sticky clay does not build up on the tool.
- Where the mapped clay content is 35%, we watch fluid returns and keep pressure controlled to reduce the chance of lifting pavement along Preston Bend Road.
- Since bedrock is mapped within 60 inches in parts of Preston, we track depth and pitch as each rod advances and adjust if the ground changes.
- Before drilling near a marked utility on Highport Road, we hydrovac expose it; surface paint shows its position, not how deep it sits.

What could a new line cross near FM 120 in Preston?
FM 120 runs 3.6 mapped roadway miles inside the Preston community boundary, and Texas State Highway 289 runs 1.6 miles. A line crossing either state highway needs a route that fits the right of way and the road requirements. Preston Bend Road is the longest named street at 3.2 miles inside the boundary. Highport Road runs 1.26 miles, and Lazy Acres Circle runs 1.08 miles. Those streets give a practical sense of the local road network a bore may pass under without opening the pavement.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| FM 120 | State highway | 3.6 roadway miles inside | State highway office |
| Texas State Highway 289 | State highway | 1.6 roadway miles inside | State highway office |
| Lake Texoma | Lake or pond | 14,044 acres, inside | Checked for Corps of Engineers jurisdiction |
| Little Mineral Arm | Lake or pond | 2,665 acres, inside | Checked for Corps of Engineers jurisdiction |
No railroad is mapped inside the Preston community boundary or within 1 mile outside it, so a rail crossing is not indicated by these maps. No streams are mapped inside the boundary or within 1 mile outside it, and no street crossings of named streams are mapped. Lake Texoma and Little Mineral Arm are both inside the boundary. A proposed bore crossing either lake needs a check for U.S. Army Corps of Engineers jurisdiction during planning.
Do I need a permit to bore in Preston and Grayson County?
Preston is unincorporated, so there is no city government; local street and permit responsibility rests with the county or state. Work in the FM 120 or Texas State Highway 289 right of way needs a TxDOT utility permit reviewed by the TxDOT Paris District. The line owner files through RULIS, and we prepare the bore plan and profile for that application. Highway crossings require at least 60 inches of cover for electric and communication lines and water lines, and for pressurized sewer lines. The along right of way depths are 48 inches for electric and communication, 36 inches for water. TxDOT can set different depths. Existing highway pavement is bored or tunneled, and a lake crossing is checked for federal jurisdiction.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
Which utilities serve Preston in Grayson County?
Before planning a bore near Preston Bend Road, confirm the water provider for the specific address with the county or local water district. Public water records do not identify a provider that can be matched to Preston. Utilities reporting electric service in Grayson County include Oncor Electric Delivery Company, Texas-New Mexico Power, Cooke County Electric Cooperative Association, Denton County Electric Cooperative, Fannin County Electric Cooperative and Grayson-Collin Electric Cooperative. The line owner for the address needs to be confirmed before an electric conduit bore is planned.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| Oncor Electric Delivery Company, Texas-New Mexico Power, Cooke County Electric Cooperative Association, Denton County Electric Cooperative, Fannin County Electric Cooperative and Grayson-Collin Electric Cooperative | Electric utilities reporting service in Grayson County | EIA Form 861 | Confirm the line owner by address |
The American Community Survey 2019 to 2023 five year estimates put Preston’s median housing year at 1992; we still plan routes from site details in Grayson County. They estimate 7% of homes were built before 1960, 54% from 1960 to 1999 and 39% in 2000 or later. That mix can mean a job is replacing an older line or extending service to newer housing, but it does not date buried utilities. Along Highport Road, we expose marked utilities with hydrovac before drilling near them because paint shows location, not depth.

How far is Preston from Denison and our Yukon office?
Preston is an unincorporated community in Grayson County, with an elevation of 647 feet and an area of 5.03 square miles. ZIP code 75076 covers the area. Pottsboro is 6.6 miles south, and Denison is 8.3 miles southeast; Sherwood Shores is 8.8 miles west. Denison is the nearest larger city, while Sherman, the county seat, is 16.5 miles south. Preston is 189 road miles and a 3.8 hour drive from our Yukon, Oklahoma main office, a distance that can affect mobilization for work near FM 120.
Places near Preston
- Directional boring in Pottsboro: 6.6 miles south
- Directional boring in Denison: 8.3 miles southeast
- Directional boring in Sherwood Shores: 8.8 miles west
- Directional boring in Knollwood: 12.4 miles south
- Directional boring in Sherman: 16.5 miles south
What would we bore near Highport Road in Preston?
- Highway crossing: A bore beneath FM 120 can keep a new water or conduit line out of the roadway pavement.
- Water service: A new service near Preston Bend Road needs a confirmed water provider and an address specific route.
- Fiber conduit: A conduit run along Highport Road can be planned to pass beneath pavement instead of opening the street.
- Lake crossing: A proposed line near Lake Texoma or Little Mineral Arm needs jurisdiction checked during planning.
- Replacement bore: A route near Lazy Acres Circle can replace an older service while leaving the street surface uncut.
- Electric conduit: Near Texas State Highway 289, the line owner and TxDOT permit path need to be settled before the bore.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
What should I send for a Preston bore near Preston Bend Road?
A map pin matters near Preston Bend Road because the exact route can change which streets, utilities or highway right of way a bore meets. For work near Preston Bend Road, send us the address or pin, what will go underground, the pipe or conduit size, and the footage. A sketch or plans help us lay out the route around FM 120 and nearby services.
On a proposed crossing near Texas State Highway 289, we base the price on the job scope, including route and installation details. Ground conditions such as Konsil soil and mapped bedrock affect drilling and reaming. Crossings and exposed utilities matter, especially where a route approaches FM 120 or Texas State Highway 289, or passes pavement. Pits, excavator time, sand backfill and concrete also shape the work. Preston is 189 road miles from our Yukon office, so mobilization is part of the logistics. Near Lake Texoma, high profile or emergency work can add planning needs, so we review the proposed route and schedule with the customer.
Questions people ask about boring in Preston
Does Trinity Boring Solutions take jobs in Preston, Grayson County, and how are crews assigned?
Yes. We take directional boring work in Preston and across Texas, with our crews and vetted drilling partners handling the site work. You work with Trinity from the first call through the bore log, even if a partner contractor’s crew is at the job near FM 120.
Who owns electric lines in Preston, Grayson County, and who confirms conduit specs?
Several utilities report electric service in Grayson County, including Oncor Electric Delivery Company and Texas-New Mexico Power. That does not establish which company owns lines at a particular Preston address. Confirm the line owner and conduit requirements for the route near Highport Road before planning the bore.
Does the county or a city control Lazy Acres Circle in Preston, and must it be cut?
Preston has no city government because it is an unincorporated community, so street responsibility belongs to the county or state as applicable. A directional bore under Lazy Acres Circle can avoid cutting the pavement. The route and any required permission still need to be checked for the specific street.
How old are homes and buried lines near Highport Road in Preston?
The American Community Survey 2019 to 2023 five year estimates put the median housing year at 1992, but home age does not establish buried line age. A bore near Highport Road could serve a replacement or a newer service. We expose marked utilities before drilling near them to verify their position and depth.
Can Konsil soil in Preston corrode steel, and what pipe should I use?
The USDA soil survey maps high steel corrosion risk across 26% of Preston, but that is an area pattern, not a test of a specific route. In Preston’s Konsil soil series, HDPE is not affected by soil corrosion, and we account for that when reviewing material choices. For steel casing or tracer wire near Konsil soil, the line owner decides whether a coating is appropriate.
What ground does a bore pass through in Preston’s Konsil soil?
Konsil covers 18% of the mapped area, and the USDA soil survey maps sandy clay loam under 24% of Preston at about 40 inches below the surface. Clay is mapped under 11% at that depth, with average clay content of 35%. These mapped patterns help plan a bore but do not replace checking the actual route.
What bore sizes and lengths can Trinity handle near Quail Creek Circle in Preston?
We handle work from 3/4 inch service lines to 48 inch casing, with bore lengths from 10 feet to 5,000 feet. A route near Quail Creek Circle still needs to be checked for the line size, soil and utilities on the proposed path.
How much Texas811 notice is needed for a bore near Preston Bend Road in Preston?
Paint near Preston Bend Road shows a utility’s position, not its depth. Texas law requires a locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before. For an FM 120 start, if work slips more than 14 days past the original notice, we submit a new request to TxDOT Paris District. Before work continues near Preston Bend Road, we refresh worn or moved marks through Texas811.
What affects the cost of directional boring near FM 120 in Preston, including proposed route, footage, and soil conditions?
The route scope drives the cost. Konsil soil or mapped bedrock can affect drilling time, while a crossing near FM 120 may involve pavement, right of way requirements and exposed utilities. Pipe size, bore length, pits, concrete, creek or lake crossings and mobilization from Yukon also matter. A map pin and plans help define those conditions.
Where the Preston facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside Preston
- U.S. Census Bureau, TIGER/Line 2024: Preston boundary, roads, rail lines and streams
- U.S. Census Bureau, 2020 Census: Preston population count
- U.S. Census Bureau, American Community Survey 2019 to 2023: Preston housing units and year built
- Macrostrat geologic map compilation: map units under Preston
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving Grayson County
- U.S. Geological Survey, Elevation Point Query Service: Preston elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to Preston
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in Preston
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in Preston, Texas
Type the address of your job in Preston. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
County and State Pages for Preston
Same county: Van Alstyne · Whitesboro · Howe · Gunter · Collinsville · Whitewright · Bells · Tioga · Southmayd · Tom Bean · Sadler · Dorchester. All counties: Texas county list.
