trinityboringsolutions.com

Gunter Texas Directional Boring: Vertel Clay, FM 121 And Buck Creek

Quick Answer: Gunter is an incorporated city, so streets such as Main Street belong to the city; we use directional boring, also called horizontal directional drilling (HDD), to cross them without an open cut. FM 121 and BNSF Railway are also possible route constraints. Gunter is 186 road miles from our Yukon, Oklahoma main office, with Buck Creek crossings to plan around. Vertel clay and other heavy clay soils can grip the pipe, so the bore needs controlled fluid and staged reaming.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Gunter bores at a glance

  • Incorporated city in Grayson County, Texas. Population 2,498 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 186 miles, about 3.8 hours of driving.
  • Ground: Vertel soil is mapped on 24 percent of the area, with clay about 40 inches down.
  • Rock: bedrock is mapped within 60 inches on 66 percent of the area.
  • Highways inside the boundary: FM 121, Texas State Highway 289 and FM 902. State permit office: TxDOT Paris District.
  • Railroad track inside the boundary: BNSF Railway, with 9 mapped street and rail crossings.
  • Named streams inside the boundary: Buck Creek, Little Elm Creek, Walnut Fork and Mustang Creek.
  • Public water: City of Gunter, groundwater wells.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Which contractor handles directional boring near Gunter FM 121?

Gunter is an incorporated city in Grayson County, where the Census Bureau Vintage 2024 estimate puts the population at 2,498. City streets such as Main Street and Kimberlin Road are city owned. We install water, sewer, gas, electric conduit and fiber along those routes and across FM 121 where a line needs to continue.

Our main office is in Yukon, Oklahoma, and Gunter work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our equipment handles 3/4 inch service lines through 48 inch casing, from a small service bore near Main Street to a large casing job. We are a family business started in 1965, with directional boring work since 1982.

Ditch Witch JT922 compact directional drill beside the Trinity Boring Solutions truck at NE 24th Street in Oklahoma City
Our Ditch Witch JT922 compact directional drill beside the Trinity truck on a sleeve bore at NE 24th Street in Oklahoma City. Photos on this page are from our jobs in Oklahoma and Texas.

What is Gunter Vertel soil like to bore?

The USDA soil survey maps Vertel across 24 percent of Gunter, with Vertel clay, 3 to 5 percent slopes mapped over 15 percent. Clay makes up 54 percent of the mapped surface texture, while about 40 inches down the survey maps clay across 69 percent of the area and an average clay content of 52 percent. For Gunter, we use mapped soil patterns as planning context, not as test borings. The heavy clay can stick to a reamer and swell around pipe, so the route and drilling fluid need attention.

USDA soil survey, inside the Gunter city limitsWhat is mapped
Soil series mappedVertel 24 percent, Normangee 19 percent, Wilson 13 percent, Heiden 12 percent and Fairlie 11 percent
Texture at the surfaceclay 54 percent, clay loam 20 percent and silty clay loam 18 percent
Texture about 40 inches downclay 69 percent, silty clay 14 percent and bedrock 10 percent
Engineering class about 40 inches downfat clay (CH) 78 percent and lean clay (CL) 11 percent
Average clay content about 40 inches down52 percent
Bedrock mapped within 60 inches66 percent of the area (0 percent hard rock, 65 percent weathered rock)
Seasonal water table within 60 inches6 percent of the area
Flood prone soils7 percent of the area
High corrosion risk for uncoated steel99 percent of the area

The USDA soil survey maps bedrock within 60 inches across 66 percent of Gunter and within 40 inches across 34 percent; typical depth is 39 inches. Seasonal water table is mapped within 60 inches across 6 percent, and flood prone soils across 7 percent. High steel corrosion risk covers 99 percent, so the line owner should consider steel casing and tracer wire materials. The mapped Silty Clay Decomposition Residuum is Cenozoic clay and carbonate; the Eagle Ford Formation is Turonian shale, siltstone and limestone, which can slow a bore where the bit meets rock.

What does it take for us to bore Gunter clay while planning around mapped soil patterns?

Gunter’s heavy clay can stick to the reamer and press against the pipe. For routes near FM 121 or Buck Creek, we match fluid, reaming and pullback timing to the ground and the crossing.

  1. Vertel clay can ball up on a reamer, so we use thinner fluid with polymer and open the hole in stages before pulling pipe near Main Street.
  2. Heavy clay beneath Gunter can build pressure under pavement; we watch fluid returns on routes near FM 121 to avoid lifting the surface.
  3. The mapped Eagle Ford Formation includes shale, siltstone and limestone, so a bore that meets weathered rock may need slower drilling near Kimberlin Road.
  4. We hydrovac expose marked utilities along Fallon Road before the drill approaches, then track depth and pitch as the bore advances.
Rod box on the Vermeer D24x40 S3 Navigator with the bore path heading toward the trees on a rock bore in Guthrie, OK
Rod box on our Vermeer D24x40 with the bore path heading toward the trees on a rock bore in Guthrie, Oklahoma.

What is in the way of a new line in Gunter near Buck Creek?

FM 121, Texas State Highway 289 and FM 902 run within Gunter, so a route may need state highway right of way planning. Main Street has 6.24 miles mapped in the city, while Kimberlin Road has 2.45 miles and Fallon Road has 2.41 miles. A bore beneath existing highway pavement uses boring or tunneling rather than an open cut. Along a city street, the route still needs to account for pavement, driveways and buried lines.

CrossingTypeMapped extentWho has a say
FM 121State highway9.9 roadway miles insideState highway office
Texas State Highway 289State highway8.3 roadway miles insideState highway office
FM 902State highway0.2 roadway miles insideState highway office
BNSF RailwayRailroad6.75 track miles insideThe railroad
Buck CreekStream2.05 channel miles insideChecked for Corps of Engineers jurisdiction
Little Elm CreekStream1.87 channel miles insideChecked for Corps of Engineers jurisdiction
Walnut ForkStream1.48 channel miles insideChecked for Corps of Engineers jurisdiction
Mustang CreekStream1 channel miles insideChecked for Corps of Engineers jurisdiction
Stanley CreekStream0.78 channel miles insideChecked for Corps of Engineers jurisdiction
East Fork Trinity RiverStream0.58 channel miles insideChecked for Corps of Engineers jurisdiction
Walnut CreekStream0.32 channel miles insideChecked for Corps of Engineers jurisdiction
Bear CreekStream nearby0.5 miles outsideChecked for Corps of Engineers jurisdiction
Clarks BranchStream nearby0.6 miles outsideChecked for Corps of Engineers jurisdiction
Honey CreekStream nearby0.9 miles outsideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

BNSF Railway has 6.75 track miles in Gunter, and public mapping records 9 street and rail crossings in the city. A proposed crossing needs an agreement with BNSF Railway, which sets the crossing conditions. Buck Creek has 2.05 channel miles in the city, while Little Elm Creek has 1.87; public mapping shows 3 street crossings of named streams. Creek work needs a check for U.S. Army Corps of Engineers jurisdiction during planning.

Who has to sign off on Gunter BNSF Railway crossings?

FM 121, Texas State Highway 289 and FM 902 are state highways, so work in their right of way needs a TxDOT utility permit reviewed by the TxDOT Paris District. The utility owner, not our drilling crew, files through TxDOT’s RULIS system; we prepare the bore plan and profile for that application. TxDOT rules call for boring or tunneling beneath existing highway pavement, with at least 60 inches of cover for electric and communication crossings. A BNSF Railway crossing needs the railroad’s agreement, and Buck Creek is checked for Corps jurisdiction during planning. When we plan boring work in Gunter, city streets belong to the city.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Whose lines are already buried in Gunter, Grayson County?

The City of Gunter public water system draws from groundwater wells and reports 961 service connections serving 2,883 people. For electric service in Grayson County, reporting utilities include Oncor Electric Delivery Company, Texas-New Mexico Power, Cooke County Electric Cooperative Association, Denton County Electric Cooperative, Fannin County Electric Cooperative and Grayson-Collin Electric Cooperative. We confirm the line owner for a specific Gunter address before planning an electric conduit bore.

Line ownerWhat it isSourceSize
City of GunterPublic water systemGroundwater wells961 connections, 2,883 people served
Oncor Electric Delivery Company, Texas-New Mexico Power, Cooke County Electric Cooperative Association, Denton County Electric Cooperative, Fannin County Electric Cooperative and Grayson-Collin Electric CooperativeElectric utilities reporting service in Grayson CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates give Gunter a median housing year of 2004; 12 percent of homes were built before 1960, while 59 percent date to 2000 or later. A replacement route near Kimberlin Road may meet older buried lines beside newer services. Before drilling near any marked utility, we use hydrovac potholing to expose it; paint shows its position, not its depth.

Exposed underground utility line in a hand dug potholing pit before a directional bore in Oklahoma
An existing utility line exposed in a pothole before a directional bore in Oklahoma.

How far is Gunter from Tioga and our Yukon office?

Gunter is in Grayson County, 18.4 miles southwest of the county seat, Sherman. The city covers 19.42 square miles and sits at an elevation of 679 feet. ZIP codes serving Gunter include 75058, 76271 and 75459. Tioga is 6.7 miles northwest, while Celina is 6.6 miles south and is the nearest larger city. From our Yukon, Oklahoma main office, Gunter is 186 road miles away, a 3.8 hour drive; that distance is part of mobilization planning for a job near FM 121.

Places near Gunter

What would we bore near Gunter Main Street?

  • Highway crossing: A route under FM 121 needs a bore plan that accounts for the state highway right of way and existing pavement.
  • Water service: A new connection near Main Street can tie into a route serving the City of Gunter groundwater well system.
  • Fiber conduit: A run along Kimberlin Road can pass beneath driveways and pavement without cutting each surface.
  • Creek crossing: A line near Buck Creek needs a planned channel crossing and a check for Corps jurisdiction.
  • Rail crossing: A route beneath BNSF Railway needs the railroad’s agreement for the crossing conditions.
  • Street replacement: A water or sewer bore near Fallon Road can replace a buried line without opening the full street.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What should I send for a Gunter bore near Mc Donald Road?

Start with the address or map pin, such as a point on Mc Donald Road. Tell us what will go underground, whether it is a water line or fiber conduit near the City of Gunter water system. Give us the pipe or conduit size and expected footage. A sketch or plan showing a route across FM 121 or Buck Creek helps us check the crossing.

The price follows the route details, not one item alone. Gunter’s heavy Vertel clay can affect drilling time and reaming; an FM 121 crossing brings state right of way planning, while BNSF Railway adds a separate crossing agreement. We also consider footage, pipe or conduit size, utilities that must be exposed, pavement, creek crossings, pits and excavator time. The 186 road miles from Yukon affect mobilization, and emergency or high profile work can change the plan.

Questions people ask about boring in Gunter

Does Trinity Boring Solutions take Gunter jobs in Grayson County, and how are crews assigned?

Yes. Across Texas, we take directional boring work in Gunter and throughout the state. Our own crews and vetted partner drilling contractors may handle work near FM 121, while you deal with Trinity from the first call through the bore log. The job route and schedule guide which crew is assigned.

Who owns electric lines in Gunter, Grayson County, and who confirms conduit specifications?

Several utilities report electric service in Grayson County, including Oncor Electric Delivery Company and Texas-New Mexico Power. We cannot identify the provider at every Gunter address from that information alone. We confirm the specific line owner before planning conduit near Main Street, then the owner confirms the requirements for its line.

Does the city or county control Fallon Road in Gunter, and can we avoid cutting it?

Gunter is incorporated, so Fallon Road is a city street. A directional bore can pass beneath the street, keeping the pavement uncut when the route and site conditions allow. The entry and exit pits sit off the traveled surface, and marked utilities on the path are exposed before drilling near them.

Do housing and buried lines near Kimberlin Road in Gunter affect replacement bores?

They can. The American Community Survey 2019 to 2023 five year estimates put Gunter’s median housing year at 2004, with 12 percent of homes built before 1960 and 59 percent built in 2000 or later. A replacement bore near Kimberlin Road may encounter older lines as well as newer services, so marked utilities need exposure before drilling.

Does Vertel soil in Gunter corrode steel, and what pipe should I use?

The USDA soil survey maps high steel corrosion risk across 99 percent of Gunter, including areas with Vertel soil. The line owner should weigh that risk when choosing steel casing or tracer wire materials and coatings. HDPE is not subject to the mapped steel corrosion concern, but the owner selects the line material.

What ground is likely around Vertel soil in Gunter about 40 inches down?

The USDA soil survey maps clay across 69 percent of Gunter at about 40 inches below the surface, with average clay content of 52 percent at that depth. Vertel is the leading mapped soil series at 24 percent. Heavy clay can cling to the reamer and grip pipe, so staged reaming and fluid control matter.

Does the 186 road mile trip from Yukon to Gunter change a job near Celina?

Gunter is 186 road miles and a 3.8 hour drive from our Yukon, Oklahoma main office; Celina is 6.6 miles south of Gunter. Distance can affect mobilization planning, especially when a job needs additional equipment or crew time. The route, access and scope near Celina help determine what the job requires.

How much 811 notice is needed for a Gunter bore near Main Street, and what if marks move?

Texas811 needs a locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before work. If a Main Street start slips more than 14 days past the original notice, make a new request. Before work continues in Gunter, we refresh through Texas811 any marks that wear off or move.

What affects the cost of directional boring in Gunter near FM 121?

The route, footage and pipe or conduit size matter, along with Gunter’s heavy clay, pavement and the number of utilities to expose. An FM 121 crossing may require state highway permitting, while a Buck Creek crossing adds site planning. Pits, excavator time, sand backfill, emergency work and mobilization from Yukon also affect the job scope.

Where the Gunter facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Gunter

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Gunter, Texas

Type the address of your job in Gunter. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Gunter

Same county: Sherman · Denison · Van Alstyne · Whitesboro · Howe · Pottsboro · Preston · Collinsville · Whitewright · Bells · Sherwood Shores · Southmayd. All counties: Texas county list.