trinityboringsolutions.com

Ector Texas Directional Boring: Wilson Silt Loam, FM 898 and Pecan Branch

Quick Answer: Ector is a small incorporated city, so its streets belong to the city; Trinity does directional boring, also called horizontal directional drilling (HDD), beneath FM 898. The Yukon main office is 201 road miles away, and Cardinal Street is one local route to assess. Wilson soil is mapped across 45 percent of the city. Its silt loam can drill quickly but needs controlled fluid to avoid washing the hole open.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Ector bores at a glance

  • Incorporated city in Fannin County, Texas. Population 790 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 201 miles, about 4 hours of driving.
  • Ground: Wilson soil is mapped on 45 percent of the area, with clay about 40 inches down.
  • Rock: bedrock is mapped within 60 inches on 50 percent of the area.
  • Highways inside the boundary: FM 898 and Texas State Highway 56. State permit office: TxDOT Paris District.
  • Railroad track inside the boundary: Texas Northeastern Railroad (line shown as out of service), with 3 mapped street and rail crossings.
  • Named streams inside the boundary: Pecan Branch.
  • Public water: City of Ector, groundwater wells.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who does directional boring on Cardinal Street in Ector?

Ector is a small incorporated city in Fannin County, so its streets belong to the city. In Ector, we use the Census Bureau Vintage 2024 estimate of 790 as context when planning underground work. We install water, sewer, gas, electric conduit and fiber, with routes that could pass beneath Main Street, Cardinal Street or FM 898 rather than cutting across them.

Our main office is in Yukon, Oklahoma, and Ector work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Under the Arkansas River in Tulsa, our longest bore ran roughly 4,100 feet with 48 inch pipe, far beyond a typical utility crossing near Ector’s Main Street. Our family business began in 1965, and directional boring has been part of our work since 1982.

Aerial view of a bore pit with drill rig and conduit alongside a directional drill rig and conduit on a concrete lot
Our crew at a bore pit beside the directional drill on a conduit job, seen from above. Photos on this page are from our jobs in Oklahoma and Texas.

How does Ector’s Wilson soil affect a bore?

The USDA soil survey maps Wilson soil across 45 percent of Ector, mostly as Wilson silt loam. Silt loam makes up 45 percent of the mapped surface texture, while clay accounts for 30 percent. At about 40 inches below the surface, the survey maps clay across 48 percent of the area and bedrock across 47 percent. For Ector, we treat mapped soil patterns as planning context, not as test borings. For a route near FM 898, the silt loam can cut readily but may wash out if drilling fluid pressure is too high.

USDA soil survey, inside the Ector city limitsWhat is mapped
Soil series mappedWilson 45 percent, Vertel 28 percent, Stephenville 19 percent, Whitesboro 5 percent and Fairlie 3 percent
Texture at the surfacesilt loam 45 percent, clay 30 percent and fine sandy loam 19 percent
Texture about 40 inches downclay 48 percent, bedrock 47 percent and clay loam 5 percent
Engineering class about 40 inches downfat clay (CH) 75 percent and lean clay (CL) 5 percent
Average clay content about 40 inches down54 percent
Bedrock mapped within 60 inches50 percent of the area (0 percent hard rock, 50 percent weathered rock)
Seasonal water table within 60 inches45 percent of the area
Flood prone soils5 percent of the area
High corrosion risk for uncoated steel75 percent of the area

The survey maps bedrock within 40 inches across 47 percent of Ector and a seasonal water table within 40 inches across 45 percent. Small pits and water management may matter near Pecan Branch. Flood prone soils cover 5 percent of the mapped area, so a creek route needs depth planning. High steel corrosion risk is mapped across 75 percent; the line owner should consider casing and tracer wire materials. The Eagle Ford Formation, of Turonian age, includes shale, siltstone and limestone, so the route may encounter slower drilling where weathered rock is present.

How do we plan a bore through Ector clay while accounting for mapped soil patterns?

Ector’s mapped silt loam and clay call for different fluid control. We adjust the drilling plan to the route, including whether it runs near Pecan Branch, beneath pavement or through soil that holds water.

  1. At a route near Wilson silt loam, we keep fluid controlled because the mapped surface soil can wash out when pressure is too high.
  2. Where Ector’s mapped clay is heavy, we use thinner fluid with polymer and staged reaming, then pull the pipe while the hole is fresh.
  3. Near Pecan Branch, we plan the bore below the channel and manage pits for the seasonal water table mapped in parts of the city.
  4. Before a drill approaches a marked line under Cardinal Street, we hydrovac expose it; a walkover locator tracks the head and logs depth and pitch.
Rod box on the Vermeer D24x40 S3 Navigator with the bore path heading toward the trees on a rock bore in Guthrie, OK
Rod box on our Vermeer D24x40 with the bore path heading toward the trees on a rock bore in Guthrie, Oklahoma.

Which roads, tracks or creeks can a bore cross in Ector near FM 898?

FM 898 and Texas State Highway 56 run inside Ector, while US 82 is 1.3 miles outside the city limits. Existing highway pavement is bored beneath rather than opened, and a rural highway crossing must extend beneath all travel lanes. Cardinal Street runs 1.4 miles in the city, Main Street 1.35 miles and Sam Rayburn Drive 1.0 mile. Those streets give a project a choice of route, but pavement, driveways and marked utilities still shape where entry and exit pits can go.

CrossingTypeMapped extentWho has a say
FM 898State highway1.4 roadway miles insideState highway office
Texas State Highway 56State highway1.1 roadway miles insideState highway office
US 82Highway nearby1.3 miles outsideState highway office
Texas Northeastern Railroad (line shown as out of service)Railroad1.13 track miles insideThe railroad
Pecan BranchStream1.92 channel miles insideChecked for Corps of Engineers jurisdiction
Cooper CreekStream nearby0.6 miles outsideChecked for Corps of Engineers jurisdiction
Ford CreekStream nearby0.8 miles outsideChecked for Corps of Engineers jurisdiction
Caney CreekStream nearby0.8 miles outsideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

The Texas Northeastern Railroad, with its line shown as out of service, has 1.13 track miles in Ector; public records map 3 street and rail crossings. Any bore beneath that track needs an agreement with the railroad owner. Pecan Branch runs 1.92 channel miles within the city, and 3 street crossings of named streams are mapped. Creek planning includes checking whether the crossing falls under U.S. Army Corps of Engineers jurisdiction.

Who approves a bore in Ector and Fannin County?

Ector’s incorporated city streets belong to the city, while work on FM 898 or Texas State Highway 56 right of way needs a TxDOT utility permit. Electric and communication lines crossing a highway need 60 inches of cover below the lowest crossed grade; water lines need 60 inches and pressurized sewer lines need 60 inches at crossings. TxDOT’s Paris District reviews the application in RULIS, filed by the utility owner. We prepare the bore plan and profile for that filing. A crossing beneath the Texas Northeastern Railroad also requires the railroad owner’s agreement, and Pecan Branch is checked for federal jurisdiction during planning.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Whose lines are buried near the City of Ector water system?

The City of Ector public water system uses groundwater wells and serves 981 people through 327 service connections. That network is a starting point for planning a connection near FM 898, but the line route still needs locating. Utilities reporting electric service in Fannin County include Oncor Electric Delivery Company, Texas-New Mexico Power, Fannin County Electric Cooperative, Farmers Electric Cooperative, Grayson-Collin Electric Cooperative and Lamar County Electric Cooperative Association. We confirm the line owner for the address before planning a conduit bore.

Line ownerWhat it isSourceSize
City of EctorPublic water systemGroundwater wells327 connections, 981 people served
Oncor Electric Delivery Company, Texas-New Mexico Power, Fannin County Electric Cooperative, Farmers Electric Cooperative, Grayson-Collin Electric Cooperative and Lamar County Electric Cooperative AssociationElectric utilities reporting service in Fannin CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put Ector’s median housing year at 1982; 29 percent of homes were built before 1960, 46 percent from 1960 to 1999 and 25 percent in 2000 or later. That mix can mean replacement work as well as new service routes along Main Street. We hydrovac expose each marked utility on the bore path before drilling near it. For a crossing under Main Street, paint shows position, not depth, so the line must be exposed before the drill approaches.

Trinity Boring Solutions technician hydrovac daylighting along a commercial curbline during utility locating in Oklahoma City
Hydrovac daylighting along a commercial curb line in Oklahoma City to find the utilities before a bore.

How far is Ector from Bonham and our Yukon office?

Ector is in Fannin County, at an elevation of 650 feet, and covers 1.17 square miles. For work in Ector, we use ZIP code 75439 to identify the city service area during planning. Bonham, the county seat and nearest larger city, is 4.8 miles east; Savoy is 5.5 miles west, and Ravenna is 6.6 miles north. Bells and Whitewright are each 8.4 miles away, west and southwest respectively. The Yukon main office is 201 road miles from Ector, a 4.0 hour drive, which is part of planning mobilization for work near FM 898.

Places near Ector

What would we bore near Main Street in Ector?

  • Highway crossing: A route beneath FM 898 stays below the highway pavement, with cover and the travel lanes included in the bore plan.
  • Water service: A connection near the City of Ector system can run under Main Street without opening the roadway surface.
  • Fiber conduit: A route beneath Cardinal Street can avoid an open cut across its pavement and driveways.
  • Creek crossing: A line beneath Pecan Branch needs channel depth planning and a check for federal jurisdiction.
  • Rail crossing: A bore beneath the Texas Northeastern Railroad requires the track owner’s agreement, even though the line is shown as out of service.
  • Electric conduit: Near Sam Rayburn Drive, we first confirm the line owner and expose marked utilities on the planned bore path.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

How do I get a quote for a bore near Pecan Branch in Ector?

For a quote, send the Ector address or map pin, what will go underground, the pipe or conduit size and the footage; a sketch or plans help. For a route near Pecan Branch, include the crossing point and any known access limits so we can assess the creek, entry pits and exit pits together.

The job details set the price: ground, crossings and logistics all matter. Wilson silt loam and mapped clay affect drilling fluid and reaming; a crossing beneath FM 898 or the Texas Northeastern Railroad adds route and approval planning. Pecan Branch can add creek access and depth considerations. Length, pipe size, exposed utilities, pavement, pit work, backfill and mobilization from Yukon also affect the scope. Share those details with the route so the estimate reflects the actual Ector work.

Questions people ask about boring in Ector

Does Trinity Boring Solutions take directional boring work in Ector and Fannin County?

Yes. We take directional boring work in Ector and across Texas, with our own crews and partner contractor crews from vetted satellite yards. With Trinity, we stay involved from the first call through the bore log, regardless of which crew is on site for Ector work. A route under FM 898 is planned around its pavement, ground and existing utilities.

What does a bore under the Texas Northeastern Railroad (line shown as out of service) in Ector require?

A crossing under the Texas Northeastern Railroad needs an agreement from the railroad that owns the track. The railroad sets crossing conditions such as casing, depth and flagging. Ector public records map 1.13 track miles within the city, so the proposed route and crossing point need to be reviewed before work is planned.

Can a line be bored under Pecan Branch in Ector?

Yes, a bore can be planned beneath Pecan Branch, subject to route and depth review. The stream runs 1.92 channel miles within Ector, so planning accounts for its channel and checks whether U.S. Army Corps of Engineers jurisdiction applies. Nearby seasonal water table mapping can also affect the size and management of the entry and exit pits.

How do we confirm who runs Ector’s public water system and that its wells use groundwater?

The City of Ector owns and operates the public water system, which uses groundwater wells. The public water system in Ector serves 981 people through 327 service connections, figures we keep in context when planning underground work. For a proposed connection near Main Street, the existing line location still needs to be verified before the bore route is set.

Which electric utility serves my Ector address in Fannin County, and who confirms conduit specs?

The provider must be confirmed for the specific Ector address. Utilities reporting service in Fannin County include Oncor Electric Delivery Company, Texas-New Mexico Power, Fannin County Electric Cooperative, Farmers Electric Cooperative, Grayson-Collin Electric Cooperative and Lamar County Electric Cooperative Association. Confirm conduit requirements with the line owner before planning a route near FM 898.

Who controls Ector streets, and does a bore under Sam Rayburn Drive need a cut?

Because Ector is incorporated, we treat its city streets as municipal routes when planning boring permits and crossings. A bore beneath Sam Rayburn Drive can be planned to leave the street surface uncut, with entry and exit pits in the ground on either side. The proposed route still needs utility locating and exposure before drilling near marked lines.

Does Trinity cover Bonham and rural sites outside Ector?

Yes. We take work across Texas, including sites in and around Bonham, which is 4.8 miles east of Ector, and rural routes beyond the city limits. For a job near US 82, provide the address or map pin so we can assess the route, access and distance from the Yukon main office.

How much notice does Texas811 need for a bore near Cardinal Street in Ector?

For work near Cardinal Street, request locates at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays; Texas811 describes that as at least two working days. The request cannot be made earlier than 14 days before the start. If work slips more than 14 days past the original notice, request a new ticket, and have worn or moved marks refreshed before work continues.

What affects directional boring costs near FM 898 in Ector, including access and crossing conditions?

The route and scope determine the price, not just its length. Wilson soil and clay affect drilling; FM 898, railroad or creek crossings add planning; and marked utilities, pavement, pits, backfill and excavator time change the work. The 201 road miles from Yukon inform how we plan mobilization for Ector boring work. Pipe size, footage and emergency timing are part of the estimate too.

Where the Ector facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Ector

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Ector, Texas

Type the address of your job in Ector. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Ector

Same county: Leonard · Honey Grove · Trenton · Ladonia · Dodd City · Bailey · Windom · Pecan Gap. All counties: Texas county list.