Honey Grove Texas Directional Boring: Fairlie Clay, US 82 and Honey Grove Creek
Quick Answer: US 82 and Honey Grove Creek are crossings that can shape a route, and Trinity Boring Solutions does directional boring, also called horizontal directional drilling (HDD), in Honey Grove, Texas. The Yukon, Oklahoma main office is 221 road miles away, so a route near Main Street or the Texas Northeastern Railroad affects mobilization planning. Fairlie clay covers much of the mapped ground and can cling to a reamer, so we plan staged passes and a prompt pull.
Honey Grove bores at a glance
- Incorporated city in Fannin County, Texas. Population 1,802 (Census Bureau 2024 estimate).
- Road distance from our Yukon, Oklahoma main office: 221 miles, about 4.4 hours of driving.
- Ground: Fairlie soil is mapped on 53 percent of the area, with clay about 40 inches down.
- Rock: bedrock is mapped within 60 inches on 91 percent of the area.
- Highways inside the boundary: US 82, Texas State Highway 56, Texas State Highway 34, FM 1396 and FM 100. State permit office: TxDOT Paris District.
- Railroad track inside the boundary: Texas Northeastern Railroad (line shown as out of service), with 6 mapped street and rail crossings.
- Named streams inside the boundary: Honey Grove Creek, Tollett Creek and Threemile Creek.
- Public water: City of Honey Grove, groundwater wells.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Who handles directional boring near Main Street in Honey Grove?
Honey Grove is in Fannin County, with 1,802 residents in the Census Bureau Vintage 2024 estimate. We install water, sewer, gas, electric conduit and fiber where routes need to pass beneath Main Street, Market Street or a drive crossing US 82. The line type and route set the bore setup, and we take work across Texas.
Our main office is in Yukon, Oklahoma, and Honey Grove work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Since 1982, four decades of directional boring have shaped how our family business, started in 1965, approaches Fairlie clay that can load a reamer.

What does the soil survey show about Fairlie soil in Honey Grove?
The USDA soil survey maps Fairlie soil across 53% of Honey Grove, including Fairlie clay map units across 36% of the city. Clay makes up 59% of the mapped surface texture and 59% of the texture at about 40 inches below the surface. We use mapped patterns in Honey Grove for planning, not as test borings. Clay can stay in the hole, but it also gets sticky on the reamer and may swell around the pipe, so the route needs a drilling plan suited to that behavior.
| USDA soil survey, inside the Honey Grove city limits | What is mapped |
|---|---|
| Soil series mapped | Fairlie 53 percent, Whitewright 21 percent, Austin 9 percent, Frioton 7 percent and Ferris 5 percent |
| Texture at the surface | clay 59 percent and silty clay loam 37 percent |
| Texture about 40 inches down | clay 59 percent, bedrock 32 percent and silty clay 7 percent |
| Engineering class about 40 inches down | fat clay (CH) 59 percent and lean clay (CL) 7 percent |
| Average clay content about 40 inches down | 49 percent |
| Bedrock mapped within 60 inches | 91 percent of the area (0 percent hard rock, 91 percent weathered rock) |
| Seasonal water table within 60 inches | 0 percent of the area |
| Flood prone soils | 7 percent of the area |
| High corrosion risk for uncoated steel | 98 percent of the area |
The soil survey maps bedrock within 60 inches across 91% of Honey Grove, typically around 40 inches deep, and identifies it as weathered bedrock. The Gober Chalk and Roxton Limestone map unit dates to the Late Cretaceous; chalk can slow a bore but may be handled with a soil bit. Seasonal water table is not mapped within 60 inches, while flood prone soils cover 7% of the mapped area. High steel corrosion risk is mapped across 98%, so the line owner should consider casing and tracer wire materials.
How do we bore through clay in Honey Grove while accounting for the mapped patterns?
Fairlie clay is sticky, and the mapped profile often meets weathered bedrock around 40 inches. We match fluid and reaming to the ground, then check depth and pitch along each Honey Grove route.
- Fairlie clay can ball on the reamer and grip pipe, so we use thinner fluid, work through staged reaming and plan to pull pipe the day the hole opens.
- Heavy clay is mapped across 65% of the area at about 40 inches; we watch fluid returns near Main Street pavement to avoid lifting the surface.
- Weathered bedrock is mapped near 40 inches and the local unit includes Gober Chalk, so we allow for slower cutting where the bore meets chalk.
- Before a bore near 10th Street, we hydrovac expose each marked utility on the route, then track the drill head from the surface and log depth and pitch.

What is in the way of a new line in Honey Grove Creek country?
US 82, Texas State Highway 56, Texas State Highway 34, FM 1396, FM 100 and FM 824 run inside Honey Grove. A bore beneath existing highway pavement is installed by boring or tunneling, not an open cut. Main Street is the longest named street at 2.14 miles, followed by Market Street at 1.44 miles and 10th Street at 1.25 miles. The exact street and right of way determine where entry pits can sit and how the bore route avoids pavement.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| US 82 | US highway | 9.7 roadway miles inside | State highway office |
| Texas State Highway 56 | State highway | 6.5 roadway miles inside | State highway office |
| Texas State Highway 34 | State highway | 2 roadway miles inside | State highway office |
| FM 1396 | State highway | 1.4 roadway miles inside | State highway office |
| FM 100 | State highway | 1.2 roadway miles inside | State highway office |
| FM 824 | State highway | 0.7 roadway miles inside | State highway office |
| Texas Northeastern Railroad (line shown as out of service) | Railroad | 1.52 track miles inside | The railroad |
| Honey Grove Creek | Stream | 0.39 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Tollett Creek | Stream | 0.09 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Threemile Creek | Stream | 0.03 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Sanders Creek | Stream nearby | 0.4 miles outside | Checked for Corps of Engineers jurisdiction |
| Stevens Creek | Stream nearby | 0.4 miles outside | Checked for Corps of Engineers jurisdiction |
| Allens Creek | Stream nearby | 0.4 miles outside | Checked for Corps of Engineers jurisdiction |
| Moss Creek | Stream nearby | 0.4 miles outside | Checked for Corps of Engineers jurisdiction |
The Texas Northeastern Railroad is shown as out of service, with 1.52 track miles inside Honey Grove and 6 mapped street and rail crossings. A crossing still needs an agreement from the railroad that owns the track. Honey Grove Creek has 0.39 channel miles inside the city; mapped stream crossings also include Tollett Creek and Threemile Creek. Five street crossings of named streams are mapped, and a creek route is checked for federal water jurisdiction during planning.
Do I need a permit for a bore in Fannin County in Honey Grove?
For work in the right of way of US 82, Texas State Highway 56, Texas State Highway 34 or an FM road, the utility owner applies for a TxDOT utility permit through RULIS. The TxDOT Paris District reviews it, and we prepare the bore plan and profile for the owner’s application. At highway crossings, cover depends on the line: electric and communication, water and pressurized sewer each have specified depths under TxDOT rules, and the permit can set another depth. A Texas Northeastern Railroad crossing needs an agreement from its owner. Honey Grove is incorporated, so city streets belong to the city itself. Honey Grove Creek crossings are checked for U.S. Army Corps of Engineers jurisdiction during planning.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
Who owns the lines near the City of Honey Grove system?
The City of Honey Grove public water system uses groundwater wells and reports 747 service connections serving 2,192 people. For electric service in Fannin County, utilities reporting service include Oncor Electric Delivery Company, Texas-New Mexico Power, Fannin County Electric Cooperative, Farmers Electric Cooperative, Grayson-Collin Electric Cooperative and Lamar County Electric Cooperative Association. We confirm the line owner for the specific route before planning an electric conduit bore near Main Street or elsewhere in Honey Grove.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| City of Honey Grove | Public water system | Groundwater wells | 747 connections, 2,192 people served |
| Oncor Electric Delivery Company, Texas-New Mexico Power, Fannin County Electric Cooperative, Farmers Electric Cooperative, Grayson-Collin Electric Cooperative and Lamar County Electric Cooperative Association | Electric utilities reporting service in Fannin County | EIA Form 861 | Confirm the line owner by address |
American Community Survey 2019 to 2023 five year estimates put Honey Grove’s median housing year at 1978. The estimates show 38% of homes built before 1960 and 14% built in 2000 or later. Those dates do not establish the age of a buried line near Market Street, so replacement work needs a field check. We hydrovac pothole marked utilities on the bore path before drilling near them; paint shows location, not depth.

Do you cover Honey Grove and nearby Windom?
Honey Grove is an incorporated city in Fannin County, at an elevation of 662 feet and with 2.98 square miles of land. ZIP code 75446 covers the city. Windom is 5.4 miles west, and Petty is 6.2 miles east. Bonham, the county seat and nearest larger city listed, is 16.2 miles west. The Yukon, Oklahoma main office is 221 road miles away, a 4.4 hour drive. That distance is part of planning a bore along US 82 or a route toward Windom.
Places near Honey Grove
- Directional boring in Windom: 5.4 miles west
- Directional boring in Petty: 6.2 miles east
- Directional boring in Dodd City: 9.6 miles west
- Directional boring in Pecan Gap: 10.8 miles south
- Directional boring in Roxton: 11 miles east
- Directional boring in Bonham: 16.2 miles west
What boring work comes up near Market Street in Honey Grove?
- Highway crossing: A route beneath US 82 stays bored under the travel lanes, with cover and the utility owner’s TxDOT permit shaping the plan.
- Water service: A connection near the City of Honey Grove system can use a bore to reach a property without opening Main Street pavement.
- Fiber conduit: A Market Street fiber route can pass beneath pavement, with marked utilities exposed before the drill approaches them.
- Creek crossing: Honey Grove Creek calls for a route planned beneath the channel and a check for U.S. Army Corps of Engineers jurisdiction.
- Rail crossing: A route beneath the Texas Northeastern Railroad track requires an agreement with the railroad owner, even though the line is shown out of service.
- Street replacement: Near 10th Street, hydrovac potholing helps locate older buried lines before a replacement bore passes through the route.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
What should I send for a Honey Grove bore near US 82?
A map pin matters near US 82 because the precise right of way, street edge or creek bank changes the bore route. Send the Honey Grove address or pin, what will go underground, the pipe or conduit size and the footage. A sketch or plans help us see crossings and pit access before we plan the work.
A short, clear route through Fairlie clay with room for pits is simpler to plan than a bore crowded by crossings. Length, pipe or conduit size, soil and weathered chalk, exposed utilities, pavement, creek crossings, pit work and backfill all affect the scope. A US 82 right of way or Texas Northeastern Railroad crossing adds coordination. The 221 road miles from Yukon also affect mobilization, as can urgent timing or a difficult access point near Honey Grove Creek.
Questions people ask about boring in Honey Grove
Does Trinity take directional boring jobs in Fannin County, including Honey Grove, and how are crews assigned?
Yes. Trinity takes jobs in Honey Grove and across Texas. Customers work with Trinity from the first call through the bore log, while field work is handled by our own crews or crews from vetted partner contractor yards. A route near Main Street or US 82 helps us understand access and crossings.
Can you bore a line under Honey Grove Creek in Honey Grove?
A bore under Honey Grove Creek can be planned without cutting the creek bank. The route needs suitable entry and exit points, and planning checks whether the crossing falls under U.S. Army Corps of Engineers jurisdiction. Local flood prone soils are mapped across 7% of the city, so the channel and route need attention.
Who runs Honey Grove’s public water system, and where does its water come from as we plan underground work?
The City of Honey Grove owns and operates the public water system, which draws from groundwater wells. The reported 747 service connections serve 2,192 people, a scale we consider when planning underground work in Honey Grove. For a proposed connection near Main Street, the specific route and existing utility marks still need to be checked before drilling.
Which electric utilities report service in Fannin County near Honey Grove, and who confirms conduit specifications?
Oncor Electric Delivery Company, Texas-New Mexico Power, Fannin County Electric Cooperative, Farmers Electric Cooperative, Grayson-Collin Electric Cooperative and Lamar County Electric Cooperative Association report service in Fannin County. That list does not identify the provider at every Honey Grove address. The line owner confirms conduit requirements before a bore near US 82 is planned.
Who is responsible for 10th Street in Honey Grove, and can a bore avoid cutting it?
Because Honey Grove is incorporated, we treat its city streets as belonging to the city when planning street work. Directional boring can route a line beneath 10th Street without cutting the pavement, subject to the site plan and utility locations. We expose marked lines along the route before drilling close to them.
What does Honey Grove housing near Market Street mean for replacement bores?
The American Community Survey 2019 to 2023 five year estimates put the median housing year at 1978, with 38% built before 1960 and 14% built in 2000 or later. That does not date any buried line near Market Street. We locate and expose marked utilities before a replacement bore approaches them.
Can I reach Trinity after hours about an urgent bore near 10th Street in Honey Grove?
Yes. We have a person answering our Trinity phone 24 hours a day at (405) 409-7423, including for Honey Grove questions. For an urgent job near 10th Street, share the address or pin, what line needs to go in, and any immediate access or pavement concern so we can understand the scope.
How far ahead should I request Texas811 marks for work on Main Street in Honey Grove?
Request Texas811 at least 48 hours before excavation begins, not counting Saturdays, Sundays or legal holidays, and no earlier than 14 days before the start. If work slips more than 14 days past the original notice, make a new request. Have worn or moved marks refreshed through Texas811 before work continues on Main Street.
What affects the cost of a directional bore near US 82 in Honey Grove?
We set the price from the job scope, so Honey Grove boring work is priced according to its defined tasks. Length, pipe size, Fairlie clay or weathered chalk, utility crossings, pavement, pits, backfill and creek access all affect the work. A US 82 right of way or Texas Northeastern Railroad crossing adds planning, while the 221 road miles from Yukon affect mobilization.
Where the Honey Grove facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside Honey Grove
- U.S. Census Bureau, TIGER/Line 2024: Honey Grove boundary, roads, rail lines and streams
- U.S. Census Bureau, Vintage 2024 population estimates: Honey Grove
- U.S. Census Bureau, American Community Survey 2019 to 2023: Honey Grove housing units and year built
- Macrostrat geologic map compilation: map units under Honey Grove
- U.S. EPA Safe Drinking Water Information System: public water systems serving Honey Grove
- U.S. Department of Transportation, North American Rail Network: track owners in Fannin County
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving Fannin County
- U.S. Geological Survey, Elevation Point Query Service: Honey Grove elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to Honey Grove
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in Honey Grove
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in Honey Grove, Texas
Type the address of your job in Honey Grove. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
