trinityboringsolutions.com

Kennedale Texas Directional Boring: Crosstell Soil, Village Creek And Union Pacific Track

Quick Answer: We take directional boring, also called horizontal directional drilling (HDD), work in Kennedale, Texas, including routes planned around Village Creek and the Union Pacific track. Kennedale is 223 road miles from our Yukon, Oklahoma main office, so a route near US 287 affects mobilization planning. At about 40 inches, sandy clay loam is mapped across 35 percent of Kennedale, and sticky clay can load a reamer and grip pipe. That ground calls for staged reaming and a same day pull on a Kennedale bore.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Kennedale bores at a glance

  • Incorporated city in Tarrant County, Texas. Population 10,771 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 223 miles, about 4.4 hours of driving.
  • Ground: Crosstell soil is mapped on 30 percent of the area, with sandy clay loam about 40 inches down.
  • Rock: bedrock is mapped within 60 inches on 37 percent of the area.
  • Highways inside the boundary: Interstate 20, US 287 and US 287 Business. State permit office: TxDOT Fort Worth District.
  • Railroad track inside the boundary: Union Pacific, with 4 mapped street and rail crossings.
  • Named streams inside the boundary: Village Creek and Kee Branch.
  • Public water: City of Kennedale, surface water bought from another system.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who handles directional boring near Village Creek in Kennedale?

Trinity Boring Solutions handles directional boring in Kennedale, Tarrant County, where Village Creek, US 287 and the Union Pacific track shape possible routes. The Census Bureau Vintage 2024 estimate puts the city at 10,771 residents. We install water, sewer, gas, electric conduit and fiber, routing each line beneath or alongside Kennedale streets such as Dick Price Road where plans and clearances allow.

Our main office is in Yukon, Oklahoma, and Kennedale work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. We started as a family business in 1965 and have done directional boring since 1982; our 3/4 inch service line to 48 inch casing range can fit a short service crossing or a longer route toward Village Creek.

Aerial view of a Trinity Boring Solutions directional drill set up for a gas line bore at a commercial site
Our directional drill set up for a gas line bore at a commercial site, seen from above. Photos on this page are from our jobs in Oklahoma and Texas.

What does the soil survey show about Crosstell soil in Kennedale?

The USDA soil survey maps Crosstell across 30 percent of Kennedale, with Crosstell fine sandy loam on 17 percent and a Crosstell and urban land complex on 11 percent. Fine sandy loam is the mapped surface texture across 76 percent of the city. At about 40 inches, sandy clay loam is mapped across 35 percent, clay across 30 percent and sandy clay across 10 percent; bedrock is mapped at that depth across 8 percent. We treat Kennedale’s mapped sandy clay loam patterns as planning guidance, not test borings. The clay rich layers can stick to a reamer and grip the pipe.

USDA soil survey, inside the Kennedale city limitsWhat is mapped
Soil series mappedCrosstell 30 percent, Gasil 26 percent, Rader 10 percent, Birome 8 percent and Urban land (miscellaneous area) 6 percent
Texture at the surfacefine sandy loam 76 percent, variable 6 percent and clay loam 5 percent
Texture about 40 inches downsandy clay loam 35 percent, clay 30 percent and sandy clay 10 percent
Engineering class about 40 inches downlean clay (CL) 41 percent, fat clay (CH) 35 percent and silty clay (CL ML) 5 percent
Average clay content about 40 inches down36 percent
Bedrock mapped within 60 inches37 percent of the area (0 percent hard rock, 37 percent weathered rock)
Seasonal water table within 60 inches10 percent of the area
Flood prone soils11 percent of the area
High corrosion risk for uncoated steel50 percent of the area
Mapped as urban land (disturbed fill)6 percent of the area

The USDA soil survey maps bedrock within 60 inches across 37 percent of Kennedale and within 40 inches across 8 percent; the mapped bedrock is weathered, so the bit may slow as it meets harder material. A seasonal water table is mapped within 60 inches across 10 percent, while flood prone soils cover 11 percent, a concern near Village Creek. High steel corrosion risk is mapped across 50 percent, so casing and tracer wire material need attention from the line owner. The geologic map includes Quartz Sand Decomposition Residuum of Cenozoic age and the Woodbine Formation of Late Cretaceous age, a mix that can shift from sand to claystone or sandstone.

How do we plan a Kennedale bore through sandy clay loam?

Kennedale’s sandy clay loam and clay rich layers call for controlled fluid and staged reaming. We plan the route around local obstacles, expose marked lines, then track the head and log its depth and pitch.

  1. For Crosstell fine sandy loam over clay rich layers, we use thinner fluid with polymer and open the hole in stages to limit sticky buildup on the reamer.
  2. Because Kennedale maps heavy clay across 45 percent of the area at about 40 inches, we watch fluid returns closely near pavement so pressure does not lift it.
  3. At Village Creek, we plan depth beneath the channel and check federal jurisdiction during planning; wet ground can affect pit placement and the crossing route.
  4. Before approaching marked lines near Dick Price Road, we hydrovac pothole to expose them, then track the drill head and record depth and pitch.
Vermeer D24x40 S3 Navigator and water truck at the entry of a 385 foot sandstone rock bore above the wetland in Guthrie, Oklahoma
Our Vermeer D24x40 and water truck at the entry of a 385 foot sandstone rock bore in Guthrie, Oklahoma.

Which roads, tracks or creeks shape a Kennedale bore near Dick Price Road?

US 287, with 3.4 mapped roadway miles inside Kennedale, is a major route to plan around; Interstate 20 has 0.3 miles inside the city, and US 287 Business has 0.3 miles. Interstate 820 runs along or touches the city limits. Dick Price Road is the longest named street at 2.95 miles in the city, followed by Eden Road at 2.33 miles and Little School Road at 2.16 miles. A bore can leave the pavement intact, but its entry and exit pits still need workable locations beside the route.

CrossingTypeMapped extentWho has a say
Interstate 20Interstate0.3 roadway miles insideState highway office
US 287US highway3.4 roadway miles insideState highway office
US 287 BusinessUS highway0.3 roadway miles insideState highway office
Interstate 820Highway nearbyRuns along or touches the city limitsState highway office
Union PacificRailroad3.7 track miles insideThe railroad
Village CreekStream1.4 channel miles insideChecked for Corps of Engineers jurisdiction
Kee BranchStream1.09 channel miles insideChecked for Corps of Engineers jurisdiction
Elm BranchStream nearby0.5 miles outsideChecked for Corps of Engineers jurisdiction
Lake ArlingtonLake or pond1,924 acres, nearbyChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

Union Pacific has 3.7 track miles inside Kennedale on its Midlothian Subdivision, and public mapping shows 4 street and rail crossings. Village Creek runs 1.4 channel miles in the city, while Kee Branch runs 1.09 miles; 4 street crossings of named streams are mapped. Lake Arlington, a 1,924 acre lake, is within one mile but outside the city limits. Creek banks need a route and depth plan, and a creek crossing is checked for federal jurisdiction during planning.

Whose permission does a Kennedale bore near Union Pacific need?

For a Kennedale bore in city streets, the streets belong to the incorporated city; for work on Interstate 20, US 287 or another state highway right of way, the utility owner files the TxDOT permit application through RULIS, not the driller. The TxDOT Fort Worth District reviews it, and we prepare the bore plan and profile for the owner’s filing. Highway pavement work is bored or tunneled, with cover depths set by line type and crossing location: electric and communication lines need 60 inches at crossings, while water lines need 60 inches. Union Pacific must agree to a crossing of its Kennedale track, setting crossing conditions such as casing, depth and flagging. A Village Creek crossing is checked for U.S. Army Corps of Engineers jurisdiction during planning.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Which utilities may have lines in Kennedale and Tarrant County?

The City of Kennedale public water system uses purchased surface water and reports 3,102 service connections serving 7,670 people. Tarrant County electric service reporting includes Oncor Electric Delivery Company, Denton County Electric Cooperative, Tri-County Electric Cooperative and United Electric Cooperative Service. Those countywide reports do not identify the provider at every Dick Price Road address, so we confirm the electric line owner before planning a conduit bore.

Line ownerWhat it isSourceSize
City of KennedalePublic water systemSurface water bought from another system3,102 connections, 7,670 people served
Oncor Electric Delivery Company, Denton County Electric Cooperative, Tri-County Electric Cooperative and United Electric Cooperative ServiceElectric utilities reporting service in Tarrant CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put Kennedale’s median housing year at 1995; 11 percent of homes were built before 1960, 45 percent from 1960 to 1999 and 44 percent in 2000 or later. That mix can mean a route for replacement pipe near older homes as well as new service connections. Before drilling near marked lines along Eden Road, we use hydrovac potholing to expose them; paint shows position, not depth.

Mini excavator digging beside a pad mounted electrical transformer with red dirt spoil and a vacuum excavation trailer on site
Digging beside a pad mounted electric transformer with a vacuum excavation trailer on site.

Where is Kennedale in relation to Arlington and our Yukon yard?

Kennedale is in Tarrant County, at an elevation of 651 feet, and covers 6.61 square miles. We use Kennedale’s ZIP codes, 76060 and 76140, to identify the service area when planning underground boring. Forest Hill is 3.1 miles northwest, Everman is 4.0 miles west, Rendon is 4.6 miles south, Dalworthington Gardens is 4.6 miles northeast and Pantego is 6.1 miles northeast. Arlington, the nearest larger city, is 6.7 miles northeast; Fort Worth, the county seat, is 12.2 miles northwest. Kennedale is 223 road miles and a 4.4 hour drive from our Yukon, Oklahoma main office, which matters when planning crew mobilization for a route near US 287.

Places near Kennedale

Which jobs call for a bore near Eden Road in Kennedale?

  • Highway crossing: A bore near US 287 keeps the pavement intact while pits sit off the roadway where the route allows.
  • Creek crossing: A Village Creek bore needs a planned depth beneath the channel and a route that accounts for creek bank access.
  • Rail crossing: A route under the Union Pacific Midlothian Subdivision needs railroad agreement and crossing conditions for the line.
  • Water service: A connection near Eden Road can be planned around the City of Kennedale system and existing marked utilities.
  • Fiber conduit: A route along Dick Price Road can use a bore to avoid cutting pavement or driveways where the path permits.
  • Drainage crossing: Kee Branch routes need careful pit placement and a bore plan that accounts for mapped drainage.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What should I send for a Kennedale quote near Interstate 20?

A map pin near Interstate 20 or Dick Price Road tells us where the route sits in Kennedale and what it may cross. For a Kennedale sandy clay loam bore, send us the material, pipe or conduit size, and footage. A sketch or plans help us see pits, pavement, Village Creek or Union Pacific track conflicts before we scope the bore.

In Kennedale, soil and crossing conditions matter early: clay rich ground can load the reamer, while a Village Creek route or a Union Pacific crossing adds planning and exposure work. Price also reflects bore length, pipe or conduit size, utilities to cross and expose, concrete or pavement, pits, excavator time and sand backfill. The 223 road miles from Yukon affect mobilization, and high profile or emergency timing changes the work plan.

Questions people ask about boring in Kennedale

Does Trinity take directional boring work in Kennedale and Tarrant County, and how are crews assigned?

Yes. We take directional boring work in Kennedale, and our own crews or crews from vetted partner contractors can handle the site. The work remains with Trinity from the first call through the bore log. That staffing model applies to routes around Village Creek, US 287 and other Tarrant County crossings.

Who approves a bore under Interstate 20 in Kennedale?

For work in Interstate 20 right of way, the utility that owns the line submits the application in TxDOT’s RULIS system. The TxDOT Fort Worth District reviews it, and we prepare the bore plan and profile for the utility owner. The approved permit sets the highway conditions for the Kennedale crossing.

What does a Kennedale bore beneath Union Pacific track require?

The Union Pacific railroad must agree to a crossing of its 3.7 track miles in Kennedale. Its agreement sets details such as casing, depth and flagging. If the line also occupies highway right of way, TxDOT asks for a copy of that railroad agreement as part of the highway permit process.

Can a utility line be bored under Village Creek in Kennedale?

A bore can be planned under Village Creek, which runs 1.4 channel miles in Kennedale. The route needs depth planning beneath the channel, and the crossing is checked for U.S. Army Corps of Engineers jurisdiction during planning. Soil and bank conditions also affect where the entry and exit pits can sit.

Who runs Kennedale’s public water system, and does it use purchased surface water?

We plan underground work with the City of Kennedale’s public water system in mind, which uses purchased surface water. Kennedale’s 3,102 service connections serve 7,670 people, figures we consider when planning underground utility work in town. For a bore near Dick Price Road, the water system’s mapped lines still need to be located and exposed before drilling close to them.

Which electric line owner should I check for a Kennedale address in Tarrant County?

Confirm the line owner for the specific Kennedale address before planning an electric conduit bore. County reporting lists Oncor Electric Delivery Company, Denton County Electric Cooperative, Tri-County Electric Cooperative and United Electric Cooperative Service, but that does not identify the provider at each address. We pothole marked lines near the planned route before drilling close by.

How much notice does Texas811 need for a Kennedale bore along Dick Price Road?

The person arranging the Dick Price Road bore must request locates through Texas811 at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days ahead. Texas811 describes this as at least two working days. If the start moves more than 14 days beyond the original notice, request another ticket; worn or moved marks must be refreshed before work continues.

How far is Kennedale from the Yukon office, and does Arlington change the job plan?

At 223 road miles and a 4.4 hour drive from Yukon, Oklahoma, our main office plans Kennedale work around that distance. Arlington is 6.7 miles northeast of Kennedale, but it does not change the route conditions at the jobsite. A bore near Village Creek or US 287 still needs its own access, crossing and mobilization plan.

What affects the price of a directional bore near Interstate 20 in Kennedale?

The route and scope set the price, not just the footage. Near Interstate 20, we account for soil and rock, pipe or conduit size, length, utilities to expose, pavement, pits and excavation time. A Village Creek crossing or Union Pacific track conflict adds planning needs, and mobilization reflects the 223 road miles from Yukon.

Where the Kennedale facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Kennedale

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Kennedale, Texas

Type the address of your job in Kennedale. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Kennedale

Same county: Fort Worth · Grand Prairie · Mansfield · North Richland Hills · Euless · Grapevine · Bedford · Keller · Haltom City · Hurst · Southlake · Saginaw. All counties: Texas county list.