trinityboringsolutions.com

Rendon Texas Directional Boring: Gasil Soil, FM 1187 and Village Creek

Quick Answer: We take directional boring, also called horizontal directional drilling (HDD), across Rendon, Texas, including beneath FM 1187 where a route needs to cross. Retta Mansfield Road and Rendon Bloodworth Road are among the community’s longest streets, and 230 road miles separate Rendon from our Yukon yard. Gasil soil is common, while deeper mapped soils include clay that can grip a pipe. Village Creek crossings need their own route and pit planning.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Rendon bores at a glance

  • Unincorporated community in Tarrant County, Texas. Population 13,533 (2020 Census count).
  • Road distance from our Yukon, Oklahoma main office: 230 miles, about 4.5 hours of driving.
  • Ground: Gasil soil is mapped on 26 percent of the area, with sandy clay loam about 40 inches down.
  • Rock: bedrock is mapped within 60 inches on 32 percent of the area.
  • Highways inside the boundary: FM 1187 and FM 2738. State permit office: TxDOT Fort Worth District.
  • Railroad track inside the boundary: Union Pacific.
  • Named streams inside the boundary: Village Creek, Willow Branch, Walnut Creek and Deer Creek.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who does directional boring in Rendon near Retta Mansfield Road?

Yes, Trinity Boring Solutions takes directional boring work in Rendon, Tarrant County, where the 2020 Census count was 13,533. Retta Mansfield Road and Rendon Bloodworth Road are among the longest streets, while FM 1187 runs through the community. We install water, sewer, gas, electric conduit and fiber lines along these roads or beneath them when the route calls for a bore.

Our main office is in Yukon, Oklahoma, and Rendon work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our longest bore is roughly 4,100 feet of 48 inch pipe beneath the Arkansas River in Tulsa, showing the reach we can bring to a job. A typical Rendon project is a shorter service or utility crossing planned around a local street, soil and access.

Aerial view of a Trinity Boring Solutions directional drill set up for a gas line bore at a commercial site
Our directional drill set up for a gas line bore at a commercial site, seen from above. Photos on this page are from our jobs in Oklahoma and Texas.

What is Rendon soil like to bore in near Gasil?

Gasil is the leading mapped soil series across Rendon, covering 26 percent of the area in the USDA soil survey. Fine sandy loam appears at the surface across 69 percent, but the material changes below: at about 40 inches, sandy clay loam is mapped under 43 percent of the area and clay under 31 percent. For boring work in Rendon, we account for the average clay content at that depth, 35 percent, in our underground planning. These are mapped patterns, not test borings, so the route still needs to be judged at the actual work site.

USDA soil survey, inside the Rendon mapped community boundaryWhat is mapped
Soil series mappedGasil 26 percent, Crosstell 25 percent, Silstid 11 percent, Rader 9 percent and Birome 6 percent
Texture at the surfacefine sandy loam 69 percent, loamy fine sand 11 percent and clay loam 8 percent
Texture about 40 inches downsandy clay loam 43 percent, clay 31 percent and sandy clay 9 percent
Engineering class about 40 inches downlean clay (CL) 45 percent, fat clay (CH) 34 percent and clayey sand (SC) 11 percent
Average clay content about 40 inches down35 percent
Bedrock mapped within 60 inches32 percent of the area (0 percent hard rock, 32 percent weathered rock)
Seasonal water table within 60 inches9 percent of the area
Flood prone soils11 percent of the area
High corrosion risk for uncoated steel47 percent of the area

The USDA soil survey maps weathered bedrock within 60 inches across 32 percent of Rendon, with typical bedrock depth at 46 inches, so some routes may slow as the bit meets firmer ground. Seasonal water tables are mapped within 60 inches across 9 percent, and flood prone soils across 11 percent, which can affect pits near Village Creek. High steel corrosion risk covers 47 percent. The mapped Woodbine Formation is Late Cretaceous sandstone and mudstone, a reminder that ground conditions can change along a bore.

How is a bore run through Rendon sandy clay loam?

For a Rendon route through sandy clay loam and deeper clay, we adjust the drilling fluid and reaming sequence to keep the hole usable without driving excess pressure beneath FM 1187 or a driveway.

  1. Where Rendon’s sandy clay loam gives way to heavier clay, we use thinner fluid with polymer and ream in stages to limit sticky buildup on the reamer.
  2. Because mapped clay content at about 40 inches averages 35 percent, we watch fluid returns closely and pull pipe the same day the opened hole is ready.
  3. On a Village Creek route, we plan depth beneath the channel and keep an eye on pit water where seasonal water tables are mapped.
  4. Before a bore approaches any marked utility near FM 1187, we expose it by hydrovac; surface marks show position, not depth.
Trinity Boring Solutions water trailer supplying water for bentonite drilling fluid on a sleeve bore in northeast OKC
Our water trailer feeding the bentonite drilling fluid mix on a sleeve bore in northeast Oklahoma City.

What does a Rendon bore have to cross near FM 1187?

A Rendon bore may need to pass beneath FM 1187 or one of the community’s longer local roads, including Retta Mansfield Road, Rendon Bloodworth Road and Bennett Lawson Road. FM 1187 has 7.4 mapped roadway miles inside the community boundary, while FM 2738 has 0.1. Outside the boundary, US 287 is 0.2 miles away, and Interstate 35 and Texas State Highway 174 are each 0.9 miles away. A route under existing highway pavement is bored or tunneled rather than opened through the pavement.

CrossingTypeMapped extentWho has a say
FM 1187State highway7.4 roadway miles insideState highway office
FM 2738State highway0.1 roadway miles insideState highway office
US 287Highway nearby0.2 miles outsideState highway office
Interstate 35Highway nearby0.9 miles outsideState highway office
Texas State Highway 174Highway nearby0.9 miles outsideState highway office
Texas State Highway 81Highway nearby1 miles outsideState highway office
Union PacificRailroad1.05 track miles insideThe railroad
Village CreekStream6.16 channel miles insideChecked for Corps of Engineers jurisdiction
Willow BranchStream4 channel miles insideChecked for Corps of Engineers jurisdiction
Walnut CreekStream1.05 channel miles insideChecked for Corps of Engineers jurisdiction
Deer CreekStream0.99 channel miles insideChecked for Corps of Engineers jurisdiction
Elm BranchStream0.9 channel miles insideChecked for Corps of Engineers jurisdiction
Quil Miller CreekStream nearbyAlong the boundaryChecked for Corps of Engineers jurisdiction
Valley BranchStream nearby0.1 miles outsideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

Union Pacific has 1.05 track miles inside Rendon, but none of the mapped street and rail crossings inside the community boundary coincide with that track. Village Creek runs 6.16 channel miles here, and 11 street crossings of named streams are mapped. Willow Branch and Walnut Creek are also present. A creek route needs depth and access planning, and its water crossing is checked for federal jurisdiction during planning.

Who approves a Rendon bore in Tarrant County?

Rendon has no city government, so local street matters belong to Tarrant County, while highway right of way is handled by the state. For a bore on FM 1187 or FM 2738, TxDOT’s Fort Worth District reviews the utility permit. The utility owner, not the drilling contractor, files through TxDOT’s RULIS system; we prepare the bore plan and profile for that filing and work under the owner’s permit. A Union Pacific crossing also requires an agreement with the railroad, and a Village Creek crossing is checked for U.S. Army Corps of Engineers jurisdiction during planning.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Whose lines are already in the ground in Tarrant County near Rendon?

The water provider for a specific Rendon address has to be confirmed with Tarrant County or the local water district before a bore is planned; public records do not identify a system that can be matched to this community. For electric service in Tarrant County, Oncor Electric Delivery Company, Denton County Electric Cooperative, Tri-County Electric Cooperative and United Electric Cooperative Service report to the EIA. The owner of the line at the work address must be confirmed before conduit plans are set.

Line ownerWhat it isSourceSize
Oncor Electric Delivery Company, Denton County Electric Cooperative, Tri-County Electric Cooperative and United Electric Cooperative ServiceElectric utilities reporting service in Tarrant CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put Rendon’s median housing year at 1992; 10 percent of homes were built before 1960, 52 percent from 1960 to 1999 and 38 percent in 2000 or later. Housing age does not establish the age of buried lines, so replacement work along Retta Mansfield Road still needs utility checks. We hydrovac pothole every marked line on the bore path before drilling near it; for example, a proposed line beneath Retta Mansfield Road needs marked utilities exposed first.

Reel of yellow polyethylene gas pipe on a trailer staged for a directional bore
A reel of yellow polyethylene gas pipe on a trailer, staged for a directional bore.

Where is Rendon in relation to Everman and nearby places?

Rendon is an unincorporated census designated place in Tarrant County, at an elevation of 706 feet and covering 24.6 square miles. Across Rendon ZIP codes 76028, 76063 and 76140, we plan boring routes with those local service areas in mind. Everman is 4.4 miles northwest, Kennedale is 4.6 miles north, and Forest Hill is 5.9 miles north; Mansfield, the nearest larger city, is 6.8 miles east. Fort Worth, the county seat, is 15.4 miles northwest. Rendon is 230 road miles and a 4.5 hour drive from our Yukon yard, so that distance is part of planning a mobilization.

Places near Rendon

What kinds of bores come up in Rendon near Rendon Bloodworth Road?

  • Highway crossing: A route beneath FM 1187 is bored under the roadway, with TxDOT review when work occupies state right of way.
  • Water service: A service along Retta Mansfield Road needs the address specific water provider confirmed before the bore route is planned.
  • Fiber conduit: A conduit route beneath Rendon Bloodworth Road can avoid cutting the roadway when the alignment and utilities allow a bore.
  • Creek crossing: A Village Creek bore needs a planned path beneath the channel and a check for federal jurisdiction.
  • Rail crossing: Work across the Union Pacific track needs the railroad’s agreement to set the crossing conditions.
  • Utility replacement: A line near Bennett Lawson Road calls for potholing marked utilities before drilling close to the route.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What should I send for a Rendon quote near Union Pacific?

For a Rendon quote, send the address or map pin, what is going in the ground, the pipe or conduit size and the footage; a sketch or plans help. A route near Union Pacific or FM 1187 also needs its crossing location shown so we can understand access and the work area.

In Rendon, soil and rock conditions are the first price consideration because Gasil ground can give way to clay or weathered bedrock at depth. The footage and pipe or conduit size matter too, along with the number of utilities to expose, pavement, and any creek or drainage crossing such as Village Creek. Pits, excavator time and sand backfill affect the scope, as can high profile or emergency work. The 230 road miles from Yukon also shape mobilization.

Questions people ask about boring in Rendon

Does Trinity take directional boring jobs in Rendon, Tarrant County, and who staffs them?

Yes, we take directional boring work in Rendon, Tarrant County, and Trinity stays responsible from the first call through the bore log. Our own crews do the work, with support from satellite yards run by partner drilling contractors we have vetted. A route on FM 1187 is planned around the actual site and crossings.

Can a line be bored under Village Creek in Rendon?

A line can be planned beneath Village Creek, subject to the route, ground and required project review. The creek runs 6.16 channel miles inside Rendon, so the bore plan needs to account for the channel and working areas on both sides. For a Rendon crossing, we check US Army Corps of Engineers jurisdiction during planning before setting the boring approach.

Who owns electric lines in Rendon, Tarrant County, and who confirms conduit specs?

The specific electric line owner depends on the Rendon address and must be confirmed before we plan conduit. Utilities reporting electric service in Tarrant County include Oncor Electric Delivery Company, Denton County Electric Cooperative, Tri-County Electric Cooperative and United Electric Cooperative Service. The confirmed line owner can provide the applicable conduit specifications for a route near Bennett Lawson Road.

Who is responsible for Rendon streets such as Bennett Lawson Road, and must we cut one?

Rendon has no city government, so Bennett Lawson Road is not managed by a local city government; local street matters fall to Tarrant County, while state highways are handled by TxDOT. A directional bore can pass beneath a street without cutting its surface. Any work on FM 1187 right of way follows the state permit process.

How old are Rendon homes and buried lines near Rendon Bloodworth Road?

Rendon’s median housing year is 1992 in the American Community Survey 2019 to 2023 estimates, but that does not date buried utilities near Rendon Bloodworth Road. A replacement bore may share an established corridor or need a new alignment. We check for marked utilities and expose them before drilling near the planned path.

Could groundwater or flood prone ground affect bore pits near Village Creek in Rendon?

It could: the USDA soil survey maps seasonal water tables within 60 inches across 9 percent of Rendon and flood prone soils across 11 percent. Near Village Creek, pit location and channel depth need attention. Where water reaches a pit, smaller pits and pumping may be needed to keep the work moving.

Does Trinity cover Everman and rural sites outside Rendon?

Yes, we take work across Texas, including Rendon, nearby Everman and rural sites outside the mapped community boundary. Everman is 4.4 miles northwest of Rendon, but a project is planned from its own address, route and access conditions. From our main office in Yukon, Oklahoma, we coordinate directional boring planning for work serving Rendon.

How much notice does Texas811 need for a Rendon bore near Retta Mansfield Road?

For a bore near Retta Mansfield Road, Texas law requires a locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before it. Texas811 describes this as at least two working days. If the start slips more than 14 days past the original notice, make a new request; refresh marks that move or wear off before work continues.

What affects the cost of directional boring in Rendon near FM 1187?

The price depends on the specific Rendon route, not just its length. Soil and rock, pipe or conduit size, and footage matter, as do utilities that need exposure, pavement, creek crossings, pits and excavator time. A bore near FM 1187 may need state right of way planning, while Village Creek adds crossing considerations; mobilization also reflects the distance from Yukon.

Where the Rendon facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Rendon

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Rendon, Texas

Type the address of your job in Rendon. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Rendon

Same county: Fort Worth · Arlington · Grand Prairie · North Richland Hills · Euless · Grapevine · Bedford · Keller · Haltom City · Hurst · Southlake · Saginaw. All counties: Texas county list.