Oak Point Texas Directional Boring: Birome Soil, FM 720 And Lake Lewisville
Quick Answer: Yacht Club Road, Lakeshore Boulevard and Martingale Trail are among Oak Point’s longest streets, and FM 720 runs through the city. We do directional boring, also called horizontal directional drilling (HDD), for lines crossing FM 720 or running beneath those streets. Oak Point is 191 road miles from our Yukon, Oklahoma main office, with FM 720 shaping local access and crossing plans. Birome soil includes fine sandy loam at the surface, while clay is mapped about 40 inches down; sticky clay can load a reamer, so we plan staged passes.
Oak Point bores at a glance
- Incorporated city in Denton County, Texas. Population 6,826 (Census Bureau 2024 estimate).
- Road distance from our Yukon, Oklahoma main office: 191 miles, about 3.9 hours of driving.
- Ground: Birome soil is mapped on 30 percent of the area, with clay about 40 inches down.
- Rock: bedrock is mapped within 60 inches on 31 percent of the area.
- Highways inside the boundary: FM 720. State permit office: TxDOT Dallas District.
- Railroad track inside the boundary: none mapped.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Does anyone handle directional boring on Yacht Club Road in Oak Point?
We take directional boring work in Oak Point, Denton County, where the Census Bureau Vintage 2024 estimate puts the population at 6,826. Water, sewer, gas, electric conduit and fiber can run beneath streets such as Yacht Club Road or serve properties along it. We plan each bore around the line, its size and the route through Oak Point.
Our main office is in Yukon, Oklahoma, and Oak Point work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our family business started in 1965, and we have worked in directional boring since 1982. For a service line near Yacht Club Road or a longer FM 720 crossing, we handle sizes from 3/4 inch to 48 inch and bore lengths from 10 feet to 5,000 feet.

What does the USDA soil survey show for Birome soil in Oak Point?
The USDA soil survey maps Birome as the leading soil series in Oak Point, covering 30% of the mapped area. Fine sandy loam is the most common surface texture at 47%, while clay loam covers 27%. At about 40 inches below the surface, clay is mapped under 30% of the area and sandy clay under 22%; the average clay content at that depth is 40%. We use mapped Birome, Callisburg, Navo, and Gasil soil patterns for planning, not as substitutes for test borings. Clay can stick to the reamer and grip pipe, so the actual route and returns matter.
| USDA soil survey, inside the Oak Point city limits | What is mapped |
|---|---|
| Soil series mapped | Birome 30 percent, Callisburg 19 percent, Navo 18 percent, Gasil 8 percent and Wilson 8 percent |
| Texture at the surface | fine sandy loam 47 percent, clay loam 27 percent and stony fine sandy loam 15 percent |
| Texture about 40 inches down | clay 30 percent, bedrock 30 percent and sandy clay 22 percent |
| Engineering class about 40 inches down | lean clay (CL) 33 percent and fat clay (CH) 30 percent |
| Average clay content about 40 inches down | 40 percent |
| Bedrock mapped within 60 inches | 31 percent of the area (0 percent hard rock, 31 percent weathered rock) |
| Seasonal water table within 60 inches | 0 percent of the area |
| Flood prone soils | 1 percent of the area |
| High corrosion risk for uncoated steel | 82 percent of the area |
The USDA soil survey maps weathered bedrock within 60 inches over 31% of Oak Point, with typical bedrock depth at 33 inches; hard bedrock is not mapped within that depth range. A hard soil bit can handle weathered rock, though progress slows. Seasonal water tables are not mapped within 60 inches, and flood prone soils cover 1%. The map also rates 82% of the area high for steel corrosion risk, a concern for uncoated casing or tracer wire. The Woodbine Formation, of Cenomanian age, is mapped here, so route conditions still need checking.
How do we drill Oak Point ground with clay?
Oak Point’s mapped clay at about 40 inches can make cuttings sticky and hold an open bore. We adjust fluid and reaming to the ground along each route, whether it follows FM 720 or a neighborhood street.
- Clay is mapped under 30% of Oak Point at about 40 inches, so we use thinner fluid with polymer and ream in stages to limit sticky cuttings.
- Where clay can swell around pipe, we prepare the line near the Martingale Trail route and pull it after opening the bore rather than leaving the hole idle.
- Weathered bedrock is mapped within 60 inches over 31% of Oak Point, so a hard soil bit may work, with slower progress than in soil.
- At a proposed crossing near FM 720, we track the drill head from the surface and log depth and pitch as the bore advances.

Where might a line have to go under FM 720 in Oak Point?
FM 720 is the state highway mapped inside Oak Point, with 5.9 roadway miles in the city. US 380 is 0.6 miles outside the limits. The longest named streets include Yacht Club Road at 2.42 miles, Lakeshore Boulevard at 2.07 miles and Martingale Trail at 1.65 miles. A bore beneath FM 720 has different permitting and cover needs from a route beneath one of those city streets, so the address and crossing point guide the plan.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| FM 720 | State highway | 5.9 roadway miles inside | State highway office |
| US 380 | Highway nearby | 0.6 miles outside | State highway office |
| Lake Lewisville | Lake or pond | 20,580 acres, inside | Checked for Corps of Engineers jurisdiction |
| Lewisville Lake | Lake or pond | 386 acres, nearby | Checked for Corps of Engineers jurisdiction |
Public mapping shows no railroad inside Oak Point or within one mile outside the limits, and no street and rail crossings are mapped. No streams are mapped in the city, though unnamed drainage totals 0.77 miles. Lake Lewisville lies inside the limits. If a planned bore crosses a lake, its route is checked during planning for U.S. Army Corps of Engineers jurisdiction; a drainage route also needs a profile that keeps the bore below the channel.
Who signs off on Oak Point bores in Denton County?
As Oak Point is incorporated, we treat Yacht Club Road work as city street work. A bore in FM 720 right of way needs a TxDOT utility permit reviewed by the TxDOT Dallas District. Electric and communication lines need at least 60 inches of cover below the lowest crossed highway grade; water and pressurized sewer crossings also need 60 inches. The utility owner files through TxDOT’s RULIS system, while we provide the bore plan and profile and work under that permit. Oak Point has no mapped railroad crossing, and a lake route is checked for federal jurisdiction during planning.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
Whose lines are already buried in Oak Point, Denton County?
The water provider for a specific Oak Point address needs to be confirmed with the city, Denton County or the local water district before a bore is planned. County reporting lists Oncor Electric Delivery Company, Texas-New Mexico Power, City of Denton, Cooke County Electric Cooperative Association, Denton County Electric Cooperative, Tri-County Electric Cooperative and Wise Electric Cooperative. Those reports do not identify the provider at every Oak Point address, so we confirm the electric line owner before planning a conduit bore.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| Oncor Electric Delivery Company, Texas-New Mexico Power, City of Denton, Cooke County Electric Cooperative Association, Denton County Electric Cooperative, Tri-County Electric Cooperative and Wise Electric Cooperative | Electric utilities reporting service in Denton County | EIA Form 861 | Confirm the line owner by address |
The American Community Survey 2019 to 2023 five year estimates put Oak Point’s median housing year at 2007; 74% of homes were built in 2000 or later, and 26% from 1960 to 1999. That mix can mean a route serves newer construction or replaces an older line. We hydrovac pothole every marked utility on the bore path before drilling near it because locate paint shows position, not depth. For a proposed line beneath Lakeshore Boulevard, exposed utilities help set the crossing profile.

How far is Oak Point from Shady Shores and our Yukon yard?
Oak Point is in Denton County, covers 5.86 square miles and sits at an elevation of 567 feet. Its ZIP code is 75068. Shady Shores is 2.8 miles west, Lakewood Village is 2.5 miles south, and Cross Roads is 3.5 miles north. Little Elm, the nearest larger city, is 4.2 miles east; Denton, the county seat, is 9.5 miles west. The Yukon yard is 191 road miles away, a 3.9 hour drive, which is part of planning mobilization for work near FM 720 or Yacht Club Road.
Places near Oak Point
- Lakewood Village: 2.5 miles south
- Shady Shores: 2.8 miles west
- Cross Roads: 3.5 miles north
- Directional boring in Lake Dallas: 3.6 miles southwest
- Paloma Creek South: 4.2 miles northeast
- Directional boring in Little Elm: 4.2 miles east
What kinds of bores come up near Martingale Trail in Oak Point?
- Highway crossing: A route beneath FM 720 needs a bore plan that accounts for the state highway right of way and required cover.
- Water service: A service line near Yacht Club Road needs the address specific water provider confirmed before we plan the connection.
- Fiber conduit: A conduit route along Emerald Sound Boulevard can be bored beneath pavement, with marked utilities exposed before drilling near them.
- Replacement line: A new sewer or water line beneath Lakeshore Boulevard can avoid opening the street surface when the route and access allow.
- Drainage crossing: A bore near Oak Point’s mapped unnamed drainage needs a profile planned below the channel and checked for site conditions.
- Electric conduit: A proposed conduit route on FM 720 needs the electric line owner identified before the utility owner files for a TxDOT permit.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
What should I send for a quote on Emerald Sound Boulevard in Oak Point?
Start with an address or map pin, such as a point on Emerald Sound Boulevard, then tell us what will go underground. Include the pipe or conduit size and the footage; a sketch or plans help show turns and crossings. For a route near FM 720, note the highway crossing and any nearby pavement so we can review the path.
The work in Oak Point sets the price. Ground conditions such as Birome soil and clay affect drilling and reaming; crossings such as FM 720, concrete or pavement affect the route and setup. We also account for line size and length, utilities to expose, pits, excavator time and sand backfill. Creek or drainage crossings, high profile or emergency work and mobilization from the Yukon yard also shape the scope.
Questions people ask about boring in Oak Point
Does Trinity take directional boring jobs in Oak Point and Denton County, and who staffs them?
Yes. We take work in Oak Point, Denton County, and serve the job through our own crews or satellite yards run by drilling partners we have vetted. From the first call through the bore log, we coordinate the Oak Point FM 720 plan with whichever crew is assigned. A route on FM 720 or Yacht Club Road is planned for its own access and crossing conditions.
Who controls Martingale Trail in Oak Point, and can a bore avoid cutting the street?
Because Oak Point is incorporated, we handle Lakeshore Boulevard planning as city street work. Directional boring can put a line below Martingale Trail without cutting through the pavement; the pits sit in dirt on each side of the bore. The route and access still need review for the specific address.
How old are Oak Point homes and buried lines near Lakeshore Boulevard?
The American Community Survey 2019 to 2023 five year estimates give Oak Point a median housing year of 2007, with 74% of homes built in 2000 or later. That points to many newer services, though replacement work may involve older lines too. A bore under Lakeshore Boulevard can install a replacement without opening the street surface.
Can Oak Point Birome soil corrode steel, and what pipe should go in?
The USDA soil survey rates 82% of Oak Point high for steel corrosion risk. That matters when considering uncoated steel casing or tracer wire; HDPE is not affected by this soil corrosion concern. The line owner chooses any coating for steel, and the route near Birome soil should be planned for the intended pipe.
What ground will an Oak Point bore pass through around Birome soil?
Birome is mapped as 30% of Oak Point’s soil series, and fine sandy loam is the leading surface texture at 47%. About 40 inches down, clay covers 30% and sandy clay 22% of the mapped area. Sticky clay can build up on a reamer, so we adjust fluid and reaming to conditions along a route such as Martingale Trail.
Is there rock near the surface on an Oak Point bore route?
The USDA soil survey maps bedrock within 60 inches over 31% of Oak Point, and typical depth is 33 inches. The mapped material is weathered rather than hard bedrock in that depth range. Near Emerald Sound Boulevard, the route still needs to be checked because soil maps do not establish the conditions at an individual bore.
How far is Oak Point from the Yukon office, and does Little Elm make mobilization easier?
We plan for Oak Point’s 191 road miles and 3.9 hour drive from our Yukon, Oklahoma main office when scheduling travel. Little Elm is 4.2 miles east of Oak Point, but it does not change the stated distance from Yukon. Mobilization is part of planning for a job near FM 720, along with access and the work scope.
How much notice does Texas811 need for a bore near Yacht Club Road in Oak Point?
For a bore near Yacht Club Road, request the Texas811 locate at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before work. If an Oak Point start moves more than 14 days past the original notice, we submit a new request through TxDOT Dallas District. Worn or moved marks need refreshing through Texas811 before work continues.
What affects the cost of a directional bore under FM 720 in Oak Point?
The job scope sets the price for an FM 720 crossing. Length, pipe or conduit size, Birome soil and rock, utilities to expose, pavement, pits and excavator time all matter. Drainage crossings or emergency work can change the plan, and mobilization from the Yukon yard is another part of estimating the work.
Where the Oak Point facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside Oak Point
- U.S. Census Bureau, TIGER/Line 2024: Oak Point boundary, roads, rail lines and streams
- U.S. Census Bureau, Vintage 2024 population estimates: Oak Point
- U.S. Census Bureau, American Community Survey 2019 to 2023: Oak Point housing units and year built
- Macrostrat geologic map compilation: map units under Oak Point
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving Denton County
- U.S. Geological Survey, Elevation Point Query Service: Oak Point elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to Oak Point
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in Oak Point
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in Oak Point, Texas
Type the address of your job in Oak Point. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
County and State Pages for Oak Point
Same county: Denton · Lewisville · Frisco · Carrollton · Flower Mound · The Colony · Dallas · Corinth · Fort Worth · Highland Village · Trophy Club · Roanoke. All counties: Texas county list.
