trinityboringsolutions.com

Ovilla Texas Directional Boring: Austin Soil, FM 664 and Red Oak Creek

Quick Answer: We handle directional boring in Ovilla, also called horizontal directional drilling (HDD), for routes near Red Oak Creek without cutting the creek bank. Ovilla is 233 road miles from our Yukon, Oklahoma main office, and our own crews and vetted drilling partners staff work near Cockrell Hill Road. Austin silty clay covers much of Ovilla, so sticky cuttings and clay that can grip pipe shape the drilling plan. We adjust the fluid and ream in stages before pulling pipe.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Ovilla bores at a glance

  • Incorporated city in Ellis County and Dallas County, Texas. Population 4,771 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 233 miles, about 4.7 hours of driving.
  • Ground: Austin soil is mapped on 41 percent of the area, with bedrock about 40 inches down.
  • Rock: bedrock is mapped within 60 inches on 82 percent of the area.
  • Highways inside the boundary: FM 664. State permit office: TxDOT Dallas District.
  • Railroad track inside the boundary: none mapped.
  • Named streams inside the boundary: Red Oak Creek, Little Creek, Elm Creek and Shiloh Branch.
  • Public water: City of Ovilla, surface water bought from another system.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Which contractor handles directional boring near Cockrell Hill Road in Ovilla?

We take directional boring work along Cockrell Hill Road and other Ovilla routes in Ellis County. The Census Bureau Vintage 2024 estimate puts the city population at 4,771. We install water, sewer, gas, electric conduit and fiber lines, with the route planned for streets such as Westmoreland Road or Ovilla Road and the crossings along the way.

Our main office is in Yukon, Oklahoma, and Ovilla work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our longest bore was roughly 4,100 feet of 48 inch pipe under the Arkansas River in Tulsa. Beside that reach, a bore along Ovilla Road is a smaller job shaped by local soil and utility crossings. We have been a family business since 1965 and have done directional boring since 1982.

Trinity Boring Solutions Ditch Witch JT922 HDD rig and vacuum excavation truck on a commercial bore in Oklahoma City
Our Ditch Witch JT922 drill and vacuum excavation truck on a commercial bore in Oklahoma City. Photos on this page are from our jobs in Oklahoma and Texas.

What ground should we expect when boring in Ovilla Austin soil?

The USDA soil survey maps Austin soil across 41 percent of Ovilla, with Eddy soil at 23 percent and Stephen soil at 14 percent. Silty clay is the leading surface texture, mapped across 62 percent of the city. At about 40 inches below the surface, the survey maps bedrock texture across 82 percent and silty clay across 7 percent; average clay content at that depth is 46 percent. These are mapped patterns, not test borings, so the conditions beside Red Oak Creek Road still need site specific review.

USDA soil survey, inside the Ovilla city limitsWhat is mapped
Soil series mappedAustin 41 percent, Eddy 23 percent, Stephen 14 percent, Houston Black 6 percent and Alluvial land (miscellaneous area) 5 percent
Texture at the surfacesilty clay 62 percent, gravelly clay loam 17 percent and clay loam 11 percent
Texture about 40 inches downbedrock 82 percent, silty clay 7 percent and clay 6 percent
Engineering class about 40 inches downfat clay (CH) 18 percent
Average clay content about 40 inches down46 percent
Bedrock mapped within 60 inches82 percent of the area (0 percent hard rock, 82 percent weathered rock)
Seasonal water table within 60 inches0 percent of the area
Flood prone soils4 percent of the area
High corrosion risk for uncoated steel72 percent of the area

The USDA soil survey puts typical bedrock depth at 21 inches and maps weathered bedrock within 60 inches across 82 percent of Ovilla. Austin Chalk, a Late Cretaceous unit, is also mapped here; chalk can slow drilling if the bore reaches it. The survey does not map a seasonal water table within 60 inches, while flood prone soils cover 4 percent. High steel corrosion risk is mapped across 72 percent, so the line owner should consider casing and tracer wire materials; HDPE is not affected by that soil corrosion concern.

How do crews handle Ovilla bedrock and clay?

On an Ovilla route, Austin silty clay and shallow mapped bedrock call for controlled fluid and careful steering. We track the drill head from the surface and log its depth and pitch as it advances.

  1. With Austin silty clay mapped across much of Ovilla, we use controlled fluid and staged reaming to manage sticky cuttings before pulling pipe.
  2. The survey maps bedrock texture at about 40 inches across 82 percent of Ovilla; if a bore reaches Austin Chalk, we allow for slower drilling.
  3. Before drilling near a marked utility, we hydrovac pothole it. A proposed line beneath Cockrell Hill Road gets exposed before the drill approaches.
  4. At Red Oak Creek, we plan the bore beneath the channel and track depth and pitch from the surface as the drill advances.
Rock bit on the drill rod at the front of a Vermeer D24x40 S3 with broken sandstone at the entry of a rock bore in Guthrie, OK
Rock bit on the drill rod with broken sandstone at the entry of a rock bore in Guthrie, Oklahoma.

What could a new line cross in Ovilla near Red Oak Creek?

FM 664 is the state highway mapped inside Ovilla, with 2.7 roadway miles in the city. A line crossing its pavement needs a bore rather than an open cut unless TxDOT gives written approval for trenching. Cockrell Hill Road is the longest named street at 3.08 miles inside the city. Ovilla Road runs 2.9 miles, and Westmoreland Road runs 2.69 miles. A route on those streets needs its own utility checks and a crossing plan that fits the road and nearby access.

CrossingTypeMapped extentWho has a say
FM 664State highway2.7 roadway miles insideState highway office
Red Oak CreekStream3.96 channel miles insideChecked for Corps of Engineers jurisdiction
Little CreekStream2.14 channel miles insideChecked for Corps of Engineers jurisdiction
Elm CreekStream1.1 channel miles insideChecked for Corps of Engineers jurisdiction
Shiloh BranchStream0.87 channel miles insideChecked for Corps of Engineers jurisdiction
Willow BrookStream nearbyAlong the boundaryChecked for Corps of Engineers jurisdiction
Powers BranchStream nearbyAlong the boundaryChecked for Corps of Engineers jurisdiction
Sanders BranchStream nearbyAlong the boundaryChecked for Corps of Engineers jurisdiction
North Grove CreekStream nearby0.9 miles outsideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

No railroad lines or mapped street and rail crossings are inside Ovilla, so a rail agreement is not part of the mapped route here. Red Oak Creek runs 3.96 channel miles through the city, while Little Creek runs 2.14 and Elm Creek 1.1. Public records map 9 street crossings of named streams in Ovilla. There are no lakes or ponds mapped within one mile, but a Red Oak Creek crossing still needs a route planned beneath the channel.

Who approves an Ovilla bore in Ellis County?

Ovilla is incorporated, so the city itself is responsible for its city streets, including Westmoreland Road and Cockrell Hill Road. FM 664 is a Texas state highway, and work in its right of way needs a TxDOT utility permit reviewed by the TxDOT Dallas District. The utility owner, not the drilling contractor, submits the application in TxDOT’s online RULIS system. We prepare the bore plan and profile and work under the permit issued to the owner. For a Red Oak Creek crossing, we check during planning whether the U.S. Army Corps of Engineers has jurisdiction.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Which utilities could a bore meet near the City of Ovilla system?

The City of Ovilla public water system uses purchased surface water and reports 1,304 service connections serving 4,532 people. For the Ellis County portion, utilities reporting electric service include Oncor Electric Delivery Company, HILCO Electric Cooperative, Navarro County Electric Cooperative and United Electric Cooperative Service. We confirm the electric line owner for the specific route before planning a conduit bore near FM 664; the county list does not identify the provider at every address.

Line ownerWhat it isSourceSize
City of OvillaPublic water systemSurface water bought from another system1,304 connections, 4,532 people served
Oncor Electric Delivery Company, HILCO Electric Cooperative, Navarro County Electric Cooperative and United Electric Cooperative ServiceElectric utilities reporting service in Ellis County and Dallas CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates give Ovilla a median housing year of 1997. They estimate 1 percent of homes were built before 1960, 54 percent from 1960 to 1999, and 45 percent in 2000 or later. That mix can mean either a replacement route near Ovilla Road or a new service farther along a newer street. Before the drill approaches any marked utility, we hydrovac pothole it; paint shows position, not depth.

Coiled black HDPE conduit fitted with a pulling grip staged on a lawn along a completed bore path
Coiled HDPE conduit fitted with a pulling grip, staged on a lawn along a finished bore path.

Where is Ovilla in relation to Glenn Heights?

Ovilla covers 5.79 square miles in Ellis County and Dallas County, with 85 percent of its area in Ellis County. The city sits at an elevation of 697 feet, and ZIP code 75154 serves Ovilla. Glenn Heights is 1.8 miles east and is the nearest larger city; Oak Leaf is 2.4 miles southeast. Waxahachie, the Ellis County seat, is 9.9 miles south. From our Yukon, Oklahoma yard, Ovilla is 233 road miles away, a 4.7 hour drive that can affect crew mobilization for a Cockrell Hill Road project.

Places near Ovilla

What boring work comes up around Ovilla and Westmoreland Road?

  • Highway crossing: A line under FM 664 needs a bore plan that meets the TxDOT permit conditions for the state highway right of way.
  • Water service: A service route near the City of Ovilla system can follow a street while keeping its connection and marked utilities in view.
  • Creek crossing: A route beneath Red Oak Creek needs depth planning for the channel and a jurisdiction check during planning.
  • Fiber route: A fiber conduit along Westmoreland Road can pass beneath pavement and driveways without cutting those surfaces.
  • Utility replacement: A replacement line near Ovilla Road needs marked utilities exposed before the drill approaches the route.
  • Conduit route: A conduit bore near Cockrell Hill Road starts with confirming the line owner and locating existing services.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What drives the price of directional boring in Ovilla near FM 664?

A map pin matters near Red Oak Creek because the exact bank and approach can change the crossing plan. For a route on FM 664 or Westmoreland Road, send the address or pin, what will go in the ground, the pipe or conduit size and the footage. A sketch or plans help us see the route and its crossings.

Austin silty clay and the shallow mapped bedrock are leading cost factors because they affect drilling speed, fluid and reaming. A Red Oak Creek crossing adds planning around the channel, while marked utilities on Cockrell Hill Road can mean hydrovac potholing and careful exposure. Pipe size, bore length, pavement, pits and excavator time also shape the job. Mobilization matters too: Ovilla is 233 road miles from Yukon.

Questions people ask about boring in Ovilla

Does Trinity take directional boring jobs in Ovilla and Ellis County, and who staffs them?

Yes. We take Ovilla work in Ellis County using our own crews and satellite yards operated by drilling partners we have vetted. For a bore near Cockrell Hill Road, we stay involved from the first call through the bore log, regardless of which crew handles the work. A route on Cockrell Hill Road still gets planned for its specific soil and utility crossings.

Can a crew bore under Red Oak Creek in Ovilla?

Yes, a bore can be planned beneath Red Oak Creek rather than cutting its bank. The creek runs 3.96 channel miles inside Ovilla, so the route and depth need to account for the channel. During planning, we check whether the crossing falls under U.S. Army Corps of Engineers jurisdiction.

For work near FM 664 in Ovilla, does the city own the public water system, and does it use purchased surface water?

The City of Ovilla owns the public water system, which uses purchased surface water. Public records list 1,304 service connections serving 4,532 people. For a bore near Ovilla Road, the specific connection and existing lines still need to be confirmed along the proposed route.

Which electric providers report service in Ovilla and Ellis County, and who confirms conduit specs?

For Ellis County, utilities reporting electric service include Oncor Electric Delivery Company, HILCO Electric Cooperative, Navarro County Electric Cooperative and United Electric Cooperative Service. The actual line owner must be confirmed for the specific FM 664 route before conduit planning, and that owner can confirm the conduit specifications.

Who is responsible for Ovilla streets like Westmoreland Road, and must a bore cut the street?

Ovilla is incorporated, so the city itself is responsible for its city streets, including Westmoreland Road. A directional bore can pass below street pavement without cutting it. The route still needs utility checks and any required city approval for work on the street.

How old are Ovilla homes and buried lines near Ovilla Road, and what does that mean for a replacement bore?

The American Community Survey 2019 to 2023 estimates put Ovilla’s median housing year at 1997. Homes from different eras can mean a route is replacing an older line or adding a new service, but age alone does not identify the buried utility. Near Ovilla Road, marked lines on the planned path are exposed before drilling approaches.

How much notice does Texas811 need for an Ovilla bore near Cockrell Hill Road, and what if marks move?

The Texas811 locate request for a bore near Cockrell Hill Road must be made at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before it. If a start near Ovilla Road slips more than 14 days past the original notice, we submit a new request. Before continuing a bore along Westmoreland Road, we have worn or moved marks refreshed through Texas811.

How far is Ovilla from Trinity’s Yukon office, and does nearby Glenn Heights change the job?

We plan mobilization for Ovilla around 233 road miles and a 4.7 hour drive from our Yukon, Oklahoma main office, with Glenn Heights nearby. Glenn Heights is 1.8 miles east of Ovilla, but that nearby location does not change the route requirements. The distance from Yukon can affect mobilization for a job on FM 664 or another Ovilla street.

What affects the cost of a directional bore in Ovilla near FM 664?

The ground and crossings are major factors: Austin silty clay, shallow mapped bedrock, and any route beneath Red Oak Creek can change the drilling plan. Bore length and conduit size matter, along with utilities that need exposure, pavement, pits and excavator time. A job in the FM 664 right of way also needs its permit plan, and Ovilla’s distance from Yukon affects mobilization.

Where the Ovilla facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Ovilla

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Ovilla, Texas

Type the address of your job in Ovilla. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Ovilla

Same county: Waxahachie · Midlothian · Ennis · Ferris · Palmer · Italy · Maypearl · Garrett · Venus · Milford · Pecan Hill · Bardwell. All counties: Texas county list.