trinityboringsolutions.com

Bardwell Texas Directional Boring: Houston Black Clay, FM 984 and BNSF Railway

Quick Answer: Waxahachie Avenue, Sycamore Street and Front Street are Bardwell’s longest named streets, and BNSF Railway runs through the city; we do directional boring, also called horizontal directional drilling (HDD), for routes around those crossings. Bardwell is 261 road miles from our Yukon, Oklahoma main office, with FM 984 and Texas State Highway 34 inside the limits. Houston Black soil covers 82 percent of the mapped area, so sticky clay calls for controlled drilling fluid and staged reaming. Ennis is 5.4 miles northeast.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Bardwell bores at a glance

  • Incorporated city in Ellis County, Texas. Population 670 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 261 miles, about 5.2 hours of driving.
  • Ground: Houston Black soil is mapped on 82 percent of the area, with clay about 40 inches down.
  • Rock: no bedrock is mapped in the top 60 inches.
  • Highways inside the boundary: FM 984 and Texas State Highway 34. State permit office: TxDOT Dallas District.
  • Railroad track inside the boundary: BNSF Railway, with 2 mapped street and rail crossings.
  • Public water: City of Bardwell, groundwater wells.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Which contractor handles directional boring near BNSF Railway in Bardwell?

Bardwell is an incorporated city in Ellis County, with a population of 670 in the Census Bureau Vintage 2024 estimate. We install water, sewer, gas, electric conduit and fiber, with routes planned beneath or alongside streets such as Waxahachie Avenue and Sycamore Street. BNSF Railway also runs through Bardwell, so a route near the tracks needs crossing planning.

Our main office is in Yukon, Oklahoma, and Bardwell work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our longest bore reached roughly 4,100 feet with 48 inch pipe under the Arkansas River in Tulsa; a Bardwell job is more likely to be a shorter service or utility route near FM 984 or a local street. We are a family business started in 1965, with directional boring work dating to 1982.

Trinity Boring Solutions Vermeer D24x40 directional drill set up for a bore
Our Vermeer D24x40 directional drill set up for a bore. Photos on this page are from our jobs in Oklahoma and Texas.

How does Houston Black soil affect our drilling conditions during a directional bore in Bardwell?

The USDA soil survey maps Houston Black soil across 82 percent of Bardwell and Leson soil across 17 percent. Both mapped units are clay, and the survey reports clay texture across the city at the surface and about 40 inches below it. Average clay content at that depth is 53 percent, so the ground falls in the heavy clay range. These are mapped soil patterns, not test borings; a route near Waxahachie Avenue still needs site specific planning because clay can ball up on a reamer and grip pipe.

USDA soil survey, inside the Bardwell city limitsWhat is mapped
Soil series mappedHouston Black 82 percent and Leson 17 percent
Texture at the surfaceclay 100 percent
Texture about 40 inches downclay 100 percent
Engineering class about 40 inches downfat clay (CH) 100 percent
Average clay content about 40 inches down53 percent
Bedrock mapped within 60 inchesNone mapped
Seasonal water table within 60 inches0 percent of the area
Flood prone soils0 percent of the area
High corrosion risk for uncoated steel100 percent of the area

Bedrock is not mapped in the top five feet, and seasonal water table soils and flood prone soils are not mapped in Bardwell. The geology map shows the Ozan Formation, a Late Cretaceous unit, but that map does not establish what a particular bore will encounter. High steel corrosion risk is mapped across the city, so the line owner should consider casing and tracer wire materials; HDPE avoids the soil corrosion concern. For Houston Black clay, we watch fluid returns closely so pressure does not lift pavement.

What does it take to bore through clay in Bardwell?

Houston Black clay is the main mapped ground in Bardwell. For a route near Waxahachie Avenue or FM 984, we manage sticky cuttings, keep drilling pressure controlled and prepare the pipe before the final ream.

  1. Houston Black clay can cling to the reamer, so we use a thinner fluid mix and polymer, then open the hole in stages before pulling pipe.
  2. With heavy clay mapped across Bardwell, we monitor fluid returns on routes near Waxahachie Avenue to limit pressure that could lift pavement.
  3. Before drilling near a marked line along Sycamore Street, we expose it with hydrovac; surface paint shows position but cannot establish depth.
  4. We track the drill head from the surface and log depth and pitch on routes near FM 984, where the planned profile must fit the crossing.
Open bore pit in red Oklahoma dirt with white PVC conduit stub ups and an orange safety barrier
An open bore pit in red Oklahoma dirt with PVC conduit stubbed up and a safety barrier around it.

Which roads, tracks or creeks could a Bardwell bore cross near Waxahachie Avenue?

FM 984 and Texas State Highway 34 run inside Bardwell, with 0.8 mapped roadway miles of FM 984 and 0.5 of Texas State Highway 34 in the city. Waxahachie Avenue is the longest named street at 0.48 miles, followed by Sycamore Street and Front Street at 0.4 miles each. Commerce Street is also among the longer routes at 0.38 miles. These roads help define possible bore paths, but a route under highway pavement is planned as a bore or tunnel rather than an open cut.

CrossingTypeMapped extentWho has a say
FM 984State highway0.8 roadway miles insideState highway office
Texas State Highway 34State highway0.5 roadway miles insideState highway office
BNSF RailwayRailroad1.19 track miles insideThe railroad
Elm BranchStream nearby0.9 miles outsideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

BNSF Railway has 1.19 track miles inside Bardwell on the BNSF Railway Dfw Subdivision, and public mapping shows 2 street and rail crossings in the city. There are no named streams inside the limits; Elm Branch is 0.9 miles outside them. No mapped street crossings of named streams are inside Bardwell, and no lakes or ponds are mapped within one mile. A project reaching Elm Branch would need its channel conditions considered during planning.

Whose permission does a Bardwell bore near FM 984 need?

Bardwell is incorporated, so its city streets, including Waxahachie Avenue and Sycamore Street, belong to the city itself. For work in the right of way of FM 984 or Texas State Highway 34, the utility owner applies for a TxDOT utility permit through RULIS; the TxDOT Dallas District reviews it, and we prepare the bore plan and profile for the owner’s application. For electric or communication lines crossing a state highway, the baseline cover is 60 inches below the lowest point of the crossed grade, and 48 inches for a line running along the right of way. Water lines need 60 inches at crossings and 36 inches along the right of way; pressurized sewer crossings need 60 inches. The permit may set another depth. A BNSF Railway track crossing also needs an agreement with the railroad, which sets crossing conditions. Elm Branch is outside the city, but a creek crossing is checked for U.S. Army Corps of Engineers jurisdiction during planning.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Which utilities serve Bardwell and Ellis County?

The City of Bardwell public water system uses groundwater wells and reports 239 service connections serving 692 people. For a water bore near the system, the route and connection point matter because the source is local groundwater. Utilities reporting electric service in Ellis County include Oncor Electric Delivery Company, HILCO Electric Cooperative, Navarro County Electric Cooperative and United Electric Cooperative Service. We confirm the line owner for the particular address before planning an electric conduit bore near FM 984 or a local street.

Line ownerWhat it isSourceSize
City of BardwellPublic water systemGroundwater wells239 connections, 692 people served
Oncor Electric Delivery Company, HILCO Electric Cooperative, Navarro County Electric Cooperative and United Electric Cooperative ServiceElectric utilities reporting service in Ellis CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put Bardwell’s median housing year at 1988; 9 percent of homes were built before 1960, 69 percent from 1960 to 1999 and 22 percent in 2000 or later. That mix can mean a project replaces an older line or adds a newer service, such as along Sycamore Street. On Bardwell bore paths, we hydrovac pothole every marked utility before drilling nearby because paint shows position, not depth. A line beneath Sycamore Street must be exposed before the drill approaches.

Reel of yellow polyethylene gas pipe on a trailer staged for a directional bore
A reel of yellow polyethylene gas pipe on a trailer, staged for a directional bore.

Where is Bardwell in relation to Ennis and our Yukon office?

Bardwell is in Ellis County, Texas, at an elevation of 476 feet and covers 0.3 square miles. Its ZIP code is 75101. Ennis is the nearest larger city, 5.4 miles northeast, while Garrett is 7.8 miles north and Alma is 8.9 miles east. Waxahachie, the county seat, is 12.8 miles northwest. From our Yukon, Oklahoma main office, Bardwell is 261 road miles away, a drive of 5.2 hours. We take work in Bardwell, Ennis and rural sites around Ellis County, with travel distance factored into job planning.

Places near Bardwell

What kinds of bores could come up near Sycamore Street in Bardwell?

  • Highway crossing: A route beneath FM 984 or Texas State Highway 34 is bored or tunneled below existing pavement, with the permitted depth guiding the profile.
  • Water service: A connection near the City of Bardwell groundwater system can use a bore to reach a property without opening the full street route.
  • Fiber route: A conduit path along Waxahachie Avenue can pass under pavement and driveways, with marked utilities exposed before drilling near them.
  • Rail crossing: A proposed route across BNSF Railway needs the railroad’s agreement, with its crossing conditions built into the bore plan.
  • Street replacement: A new sewer or water line near Sycamore Street can be bored beneath the road while pits remain in the dirt on each side.
  • Creek approach: A route near Elm Branch needs planning around the channel and a check for U.S. Army Corps of Engineers jurisdiction.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What should I send for a Bardwell bore near Elm Branch?

For a proposed Bardwell bore, we need you to send a map pin or address first so we can review the location. The exact location matters near Elm Branch, where a route may have different ground and crossing conditions than a line along Waxahachie Avenue. For work in Bardwell, we need to know what will go in the ground, the pipe or conduit size, and footage. A sketch or plans help us understand the route and identify crossings.

Bardwell pricing follows the route and its ground conditions. Houston Black clay matters first because sticky cuttings can call for staged reaming and careful fluid control. The number of utilities to expose, the size and length of the line, and pavement or concrete also shape the work. A route near FM 984 or BNSF Railway adds crossing planning, while creek or drainage conditions near Elm Branch may affect the scope. Our mobilization planning accounts for the 261 road miles between Yukon and Bardwell.

Questions people ask about boring in Bardwell

Does Trinity take directional boring work in Bardwell and Ellis County?

Yes. We take directional boring work in Bardwell and across Texas, and the job is staffed by our own crews or partner contractor crews from satellite yards. We coordinate Bardwell directional boring from our main office in Yukon, Oklahoma. You work with Trinity through the job, whether the bore is near FM 984 or another Ellis County route.

Does housing near Sycamore Street mean Bardwell needs replacement bores?

It can. Bardwell’s median housing year is 1988 in the American Community Survey 2019 to 2023 five year estimates, and 9 percent of homes were built before 1960. A project near Sycamore Street might replace an older line or add a new service. At Bardwell crossings, we expose marked utilities before drilling close to them.

Does Houston Black soil in Bardwell corrode steel, and what pipe can we use?

The mapped soil indicates high steel corrosion risk across Bardwell, so the line owner should consider casing and tracer wire materials. Houston Black clay is the dominant mapped soil, and HDPE avoids the soil corrosion concern. For a route near FM 984, the owner’s material choice is part of the bore plan.

What ground does a bore pass through in Bardwell’s Houston Black soil?

The USDA soil survey maps Houston Black soil across 82 percent of Bardwell, with Leson soil across 17 percent. Clay is mapped at about 40 inches below the surface across the city, with average clay content of 53 percent at that depth. Near Waxahachie Avenue, that sticky ground can ball up on a reamer.

Will our directional bore in Bardwell encounter rock beneath the Houston Black soil?

Bedrock is not mapped in Bardwell’s top five feet, but that does not rule out deeper rock. The geologic map shows the Ozan Formation, a Late Cretaceous unit. A bore near FM 984 still needs a route specific plan because mapped geology does not confirm the material at a particular depth.

Who approves a bore under FM 984 in Bardwell?

The utility owner applies for a TxDOT utility permit through RULIS for work in the FM 984 right of way. The TxDOT Dallas District reviews the application, and we prepare the bore plan and profile for the owner. If the route also crosses BNSF Railway, the railroad’s agreement is needed for that track crossing.

Does Trinity cover Ennis and rural sites outside Bardwell?

Yes. We take work in Ennis, 5.4 miles northeast of Bardwell, and at rural sites around Ellis County. Bardwell is 261 road miles from our Yukon, Oklahoma main office, so travel is part of planning a project near FM 984 or outside the city limits.

How much notice does a bore near Waxahachie Avenue need in Bardwell?

Texas811 requires a locate request at least 48 hours before excavation starts, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days beforehand. If work near Waxahachie Avenue starts more than 14 days after the original notice, submit a new request. When marks wear or move on a Bardwell job, we have them refreshed through Texas811 before continuing work.

What affects the price of a directional bore near FM 984 in Bardwell?

The route, length, pipe or conduit size, Houston Black clay, utility exposures, pavement and crossing conditions all affect the price. A bore near FM 984 may involve highway permitting and cover requirements; a route near BNSF Railway adds railroad coordination. Mobilization also reflects Bardwell’s 261 road miles from Yukon. We need the location and scope to assess the job.

Where the Bardwell facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Bardwell

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Bardwell, Texas

Type the address of your job in Bardwell. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Bardwell

Same county: Waxahachie · Midlothian · Red Oak · Glenn Heights · Ovilla · Ferris · Italy · Oak Leaf · Maypearl · Venus · Milford · Pecan Hill. All counties: Texas county list.