trinityboringsolutions.com

Pecan Hill Texas Directional Boring: Houston Black Clay, Red Oak Creek, FM 2377

Quick Answer: Red Oak Creek is a key crossing, and we take directional boring, also called horizontal directional drilling (HDD), work in Pecan Hill, Texas. Along FM 2377 or Bells Chapel Road, a bore can carry water, sewer, gas, electric conduit or fiber without cutting the surface. Yukon is 241 road miles away, so a Rockett Lane job needs mobilization in the plan. Houston Black clay holds a hole but sticks to tooling and can grip pipe, so staged reaming and fluid control matter.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Pecan Hill bores at a glance

  • Incorporated city in Ellis County, Texas. Population 748 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 241 miles, about 4.9 hours of driving.
  • Ground: Houston Black soil is mapped on 68 percent of the area, with clay about 40 inches down.
  • Rock: bedrock is mapped within 60 inches on 14 percent of the area.
  • Highways inside the boundary: FM 2377. State permit office: TxDOT Dallas District.
  • Railroad track inside the boundary: none mapped.
  • Named streams inside the boundary: Red Oak Creek, Bushy Creek and Sanger Branch.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who can I call for directional boring near Red Oak Creek in Pecan Hill?

Red Oak Creek is a key crossing to account for, and we install water, sewer, gas, electric conduit and fiber along routes such as Bells Chapel Road or near the creek. Pecan Hill is in Ellis County, where the Census Bureau Vintage 2024 estimate puts the population at 748. That small city footprint makes the route and nearby utilities important details when planning a service or replacement bore.

Our main office is in Yukon, Oklahoma, and Pecan Hill work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our longest bore reached roughly 4,100 feet with 48 inch pipe under the Arkansas River in Tulsa. By comparison, a route near Red Oak Creek is a shorter local crossing, with ground and access setting the drilling plan. For any proposed bore near Bells Chapel Road, we begin with careful utility locating; across our work, we have had no utility strike in over 25 years.

Compact Ditch Witch drill rig boring a new utility line across a front yard on a residential street in Edmond, Oklahoma
Our compact Ditch Witch drill boring a new utility line across a front yard on a residential street in Edmond, Oklahoma. Photos on this page are from our jobs in Oklahoma and Texas.

How does Houston Black soil affect a bore in Pecan Hill?

The USDA soil survey maps Houston Black soil across 68 percent of Pecan Hill, including Houston Black clay on 0 to 1 percent and 1 to 3 percent slopes. Clay is the leading surface texture, mapped across 72 percent of the city, and clay also accounts for 72 percent of the mapped material at about 40 inches below the surface. The survey estimates an average clay content of 52 percent at that depth. These are mapped soil patterns, not test borings, so the actual route still needs field checks.

USDA soil survey, inside the Pecan Hill city limitsWhat is mapped
Soil series mappedHouston Black 68 percent, Austin 9 percent, Lewisville 9 percent, Eddy 4 percent and Frio 3 percent
Texture at the surfaceclay 72 percent, silty clay 21 percent and gravelly clay loam 4 percent
Texture about 40 inches downclay 72 percent, bedrock 14 percent and silty clay 12 percent
Engineering class about 40 inches downfat clay (CH) 83 percent and lean clay (CL) 3 percent
Average clay content about 40 inches down52 percent
Bedrock mapped within 60 inches14 percent of the area (0 percent hard rock, 14 percent weathered rock)
Seasonal water table within 60 inches0 percent of the area
Flood prone soils6 percent of the area
High corrosion risk for uncoated steel93 percent of the area

The soil survey maps bedrock within 60 inches in 14 percent of Pecan Hill, with typical depth at 21 inches; that mapped bedrock is weathered, not hard bedrock. No hard bedrock is mapped within that depth. Seasonal water table is not mapped within 60 inches, while flood prone soils cover 6 percent. High steel corrosion risk is mapped across 93 percent, so the line owner should consider casing and tracer wire materials; HDPE does not share that steel concern. The mapped Silty Clay Decomposition Residuum is Cenozoic and strongly smectitic, so wet and dry cycles can change how the clay behaves.

What does it take to bore through clay in Pecan Hill?

Houston Black clay is the main ground condition in Pecan Hill. It can stay open but cling to the reamer and tighten around the product pipe, so we control fluid, ream in stages and keep the pullback organized.

  1. On Houston Black clay, we use a thinner drilling fluid and polymer to limit sticky buildup on the reamer, then enlarge the hole in stages.
  2. Because heavy clay can build pressure under pavement on FM 2377, we watch fluid returns and keep pressure controlled near the road surface.
  3. Before a bore near Rockett Lane, we expose marked utilities along the path with hydrovac potholing; surface paint does not show their depth.
  4. For a Red Oak Creek crossing, we plan the bore to stay beneath the channel and check during planning for Corps jurisdiction.
Bore pit with a 6 inch PVC sleeve, traffic cones and blue water line flags at NE 24th Street in Oklahoma City
A bore pit with a 6 inch PVC sleeve, traffic cones and blue water line flags at NE 24th Street in Oklahoma City.

Where does a line have to go under Red Oak Creek in Pecan Hill?

FM 2377 is the state highway running through Pecan Hill, with 1.8 roadway miles inside the city limits. Texas State Highway 342 is 1.1 miles outside the limits and US 77 is 1.3 miles away. For neighborhood routes, Bells Chapel Road runs 1.1 miles in the city, Rockett Lane 0.82 miles and Lowrance Road 0.7 miles. A bore route along any of these roads needs to account for the pavement, driveway access and utility marks before drilling starts.

CrossingTypeMapped extentWho has a say
FM 2377State highway1.8 roadway miles insideState highway office
Texas State Highway 342Highway nearby1.1 miles outsideState highway office
US 77Highway nearby1.3 miles outsideState highway office
Red Oak CreekStream1.28 channel miles insideChecked for Corps of Engineers jurisdiction
Bushy CreekStream0.76 channel miles insideChecked for Corps of Engineers jurisdiction
Sanger BranchStream0.36 channel miles insideChecked for Corps of Engineers jurisdiction
Cottonwood CreekStream nearby0.7 miles outsideChecked for Corps of Engineers jurisdiction
Clopton LakeLake or pond46 acres, nearbyChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

No railroad is mapped inside Pecan Hill or within 1 mile outside its limits, so there is no mapped local track crossing to plan around. Red Oak Creek runs 1.28 channel miles in the city, alongside Bushy Creek at 0.76 miles and Sanger Branch at 0.36 miles. One mapped street crossing intersects a named stream. Cottonwood Creek is 0.7 miles outside the limits, and Clopton Lake is nearby but outside the city, so a route toward those waters needs its own site review.

Do I need a permit to bore near Ellis County roads in Pecan Hill?

Pecan Hill is an incorporated city, so its city streets belong to the city; FM 2377 is different because it is a state highway. For work in that right of way, TxDOT utility rules set cover depths: electric and communication lines need 60 inches below the lowest crossed grade, and water lines need 60 inches at a crossing. The utility owner submits the application through TxDOT RULIS, and the TxDOT Dallas District reviews it. We prepare the bore plan and profile for the owner’s filing and work under the permit issued to that owner. A Red Oak Creek crossing is checked during planning for U.S. Army Corps of Engineers jurisdiction.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Which utilities are already in the ground in Ellis County near Pecan Hill?

The water provider for the specific Pecan Hill address has to be confirmed with the city, Ellis County or the local water district before a bore is planned. For electric service in Ellis County, utilities reporting to the EIA include Oncor Electric Delivery Company, HILCO Electric Cooperative, Navarro County Electric Cooperative and United Electric Cooperative Service. Those county reports do not identify the provider at every address, so we confirm the line owner before planning an electric conduit bore near FM 2377 or another route.

Line ownerWhat it isSourceSize
Oncor Electric Delivery Company, HILCO Electric Cooperative, Navarro County Electric Cooperative and United Electric Cooperative ServiceElectric utilities reporting service in Ellis CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

Pecan Hill’s median housing year is 1983 in the American Community Survey 2019 to 2023 five year estimates; for underground work, we also account for local Houston Black soil conditions. The estimates place 1 percent of homes before 1960, 84 percent from 1960 to 1999 and 15 percent in 2000 or later. A replacement bore along Rockett Lane may have older buried lines nearby, while a newer service on Bells Chapel Road may call for a different route. Paint shows a marked line’s position, not its depth, so we hydrovac pothole marked utilities on the bore path before drilling near them.

Coiled black HDPE conduit fitted with a pulling grip staged on a lawn along a completed bore path
Coiled HDPE conduit fitted with a pulling grip, staged on a lawn along a finished bore path.

Do you cover Pecan Hill and nearby Red Oak?

Pecan Hill is an incorporated city in Ellis County, at an elevation of 555 feet and covering 2.13 square miles. Pecan Hill’s ZIP codes are 75154 and 75165; for a proposed bore near FM 2377, we confirm the exact project location before planning. Red Oak is 1.3 miles north and is the nearest larger city; Oak Leaf is 4.5 miles northwest, and Glenn Heights is 6.0 miles northwest. Waxahachie, the county seat, is 7.1 miles southwest. From our Yukon yard, Pecan Hill is 241 road miles away and about a 4.9 hour drive, which is part of planning a crew’s mobilization for an FM 2377 or Red Oak Creek job.

Places near Pecan Hill

What would we bore near Bells Chapel Road in Pecan Hill?

  • Highway crossing: A bore under FM 2377 can carry a water line or conduit beneath the roadway without cutting its pavement.
  • Street service: A replacement water or sewer line along Bells Chapel Road can be routed below the surface instead of through an open cut.
  • Fiber conduit: Near Rockett Lane, a fiber route can pass marked utilities after they are exposed along the planned bore path.
  • Creek crossing: A Red Oak Creek bore can carry water, sewer or conduit below the channel while keeping the banks uncut.
  • Electric conduit: On Lowrance Road, we confirm the line owner before planning an electric conduit bore.
  • Water service: At a Pecan Hill address near FM 2377, we confirm the water provider before laying out a service route.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What do you need to quote a bore near FM 2377 in Pecan Hill?

For a Pecan Hill quote, send the address or map pin, what is going in the ground, the pipe or conduit size and the footage; a sketch or plans help. A route crossing FM 2377 or Red Oak Creek also needs to be clear on the map, since those features can change the bore path and the planning needed.

A short, open route through Houston Black clay with no pavement or creek crossing is simpler to plan than a long bore under FM 2377 or Red Oak Creek. Length, pipe size, soil and rock, marked utilities to expose, pavement, creek crossings, pits and excavator time all affect the work. Mobilization matters too: Pecan Hill is 241 road miles from Yukon. A high profile or emergency job can also require a different scope.

Questions people ask about boring in Pecan Hill

Does Trinity take directional boring jobs in Pecan Hill and Ellis County?

Yes. We take directional boring work for potential crossings near Red Oak Creek in Pecan Hill and across Texas, with route details guiding our plans. Our own crews handle jobs, and vetted partner drilling contractors can work from satellite yards; you coordinate with Trinity through planning and the bore log. For a route near Red Oak Creek, the job plan accounts for the crossing and the Houston Black clay.

What do older buried lines mean for a replacement bore on Rockett Lane in Pecan Hill?

The American Community Survey 2019 to 2023 estimates give Pecan Hill a median housing year of 1983, with 84 percent of homes built from 1960 to 1999. That age can mean a replacement route has existing utilities nearby, but it does not establish their exact location. Before drilling near marked lines on Rockett Lane, we expose them with hydrovac potholing.

Can Houston Black soil corrode steel pipe on a Pecan Hill bore?

The USDA soil survey maps high steel corrosion risk across 93 percent of Pecan Hill, so the line owner should consider material and coating choices for steel casing or tracer wire. Houston Black clay is widespread here, but the survey map is not a test of a particular bore route. HDPE is not affected by that mapped steel corrosion concern.

What is Houston Black soil like around 40 inches deep in Pecan Hill?

The USDA soil survey maps clay across 72 percent of Pecan Hill at about 40 inches, with average clay content of 52 percent at that depth. Houston Black is the leading soil series, mapped across 68 percent of the city. Heavy clay can stick to a reamer and grip pipe, so staged reaming and careful fluid control help manage the bore.

Will a Pecan Hill bore hit rock, and how much bedrock is mapped?

Bedrock is mapped within five feet in 14 percent of Pecan Hill, with typical depth at 21 inches. The mapped bedrock is weathered, and hard bedrock is not mapped within 60 inches. That does not rule out rock deeper down or at a particular bore location, so the route needs field assessment before choosing tooling.

Who approves a utility bore under FM 2377 in Pecan Hill?

TxDOT handles work in the FM 2377 right of way, with review by the TxDOT Dallas District. The utility owner submits the application in TxDOT’s RULIS system, and we prepare the bore plan and profile for that filing. The required cover depends on the line type and crossing, so the permit plan establishes the route and depth.

Can I reach Trinity after hours about an urgent bore near Lowrance Road in Pecan Hill?

Yes. A person answers Trinity’s phone at (405) 409-7423 24 hours a day. For an urgent issue near Lowrance Road, be ready to describe the location and what line is involved so we can understand the work needed. Trinity also provides 24 hour emergency response for directional boring work.

How much notice does Texas811 need for a bore on Bells Chapel Road in Pecan Hill?

Texas law requires a locate request at least 48 hours before excavation starts, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before it. For proposed work near Rockett Lane, Texas811 describes the notice period as at least two working days, so we schedule excavation accordingly. Paint on Bells Chapel Road shows position, not depth; if marks wear off or move, request refreshed marks before continuing.

What affects the price of a directional bore near FM 2377 in Pecan Hill?

The route and scope determine the price, including length, pipe or conduit size, Houston Black clay, pavement, utilities to expose and creek crossings. A bore under FM 2377 can require highway planning, while Red Oak Creek adds crossing considerations. Pecan Hill is 241 road miles from Yukon, so mobilization is also part of the estimate.

Where the Pecan Hill facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Pecan Hill

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Pecan Hill, Texas

Type the address of your job in Pecan Hill. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Pecan Hill

Same county: Waxahachie · Midlothian · Ennis · Ferris · Palmer · Italy · Maypearl · Garrett · Venus · Milford · Bardwell · Bristol. All counties: Texas county list.