trinityboringsolutions.com

Oak Leaf Texas Directional Boring: Austin Silty Clay, Red Oak Creek, Hampton Road

Quick Answer: Red Oak Creek and Little Creek put waterway crossings on the route, and we handle directional boring, also called horizontal directional drilling (HDD), in Oak Leaf, Texas, without opening creek banks. Our Yukon main office is 238 road miles away, a distance to account for on a Hampton Road job. Austin silty clay can cling to a reamer, so we manage drilling fluid and ream in stages. The survey maps bedrock within 60 inches across 66 percent of Oak Leaf.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Oak Leaf bores at a glance

  • Incorporated city in Ellis County, Texas. Population 1,685 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 238 miles, about 4.7 hours of driving.
  • Ground: Austin soil is mapped on 54 percent of the area, with bedrock about 40 inches down.
  • Rock: bedrock is mapped within 60 inches on 66 percent of the area.
  • No state or US highway is mapped inside the boundary. Closest: US 77 and Interstate 35.
  • Railroad track inside the boundary: none mapped.
  • Named streams inside the boundary: Red Oak Creek, Little Creek and Willow Brook.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Which contractor handles directional boring in Ellis County near Oak Leaf?

Ellis County’s population is 1,685, according to the Census Bureau Vintage 2024 estimate, and we take directional boring work across Texas. We install water, sewer, gas, electric conduit and fiber; in Oak Leaf, those lines may follow Hampton Road, serve homes along Highland Road, or cross Red Oak Creek without an open trench along the surface.

Our main office is in Yukon, Oklahoma, and Oak Leaf work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our longest bore was roughly 4,100 feet of 48 inch pipe beneath the Arkansas River in Tulsa, Oklahoma; it shows the reach behind a typical service crossing near Lariat Circle. For Oak Leaf, line size, route and access determine the crew and equipment.

Aerial view of a bore pit with drill rig and conduit alongside a directional drill rig and conduit on a concrete lot
Our crew at a bore pit beside the directional drill on a conduit job, seen from above. Photos on this page are from our jobs in Oklahoma and Texas.

How does Austin soil affect a bore in Oak Leaf?

The USDA soil survey maps Austin soil across 54 percent of Oak Leaf, with Lewisville at 17 percent, Frio at 9 percent and Eddy at 8 percent. At about 40 inches, mapped texture is bedrock across 66 percent and silty clay across 27 percent; average clay content there is 43 percent. For Oak Leaf boring plans across Austin, Lewisville, Frio, and Eddy soils, we have no sandy area mapped at that depth. These are area patterns, not test borings, so conditions along Locust Drive still need to be checked on the actual bore path.

USDA soil survey, inside the Oak Leaf city limitsWhat is mapped
Soil series mappedAustin 54 percent, Lewisville 17 percent, Frio 9 percent, Eddy 8 percent and Alluvial land (miscellaneous area) 3 percent
Texture at the surfacesilty clay 84 percent, gravelly clay loam 8 percent and clay loam 3 percent
Texture about 40 inches downbedrock 66 percent, silty clay 27 percent and clay loam 3 percent
Engineering class about 40 inches downfat clay (CH) 29 percent and lean clay (CL) 4 percent
Average clay content about 40 inches down43 percent
Bedrock mapped within 60 inches66 percent of the area (0 percent hard rock, 66 percent weathered rock)
Seasonal water table within 60 inches0 percent of the area
Flood prone soils9 percent of the area
High corrosion risk for uncoated steel87 percent of the area

Bedrock is mapped within 60 inches across 66 percent of Oak Leaf, and it is mapped as weathered rather than hard; typical depth is 26 inches. The geology map identifies Austin Chalk, a Late Cretaceous unit, which can take longer to drill than dirt. Seasonal water table is not mapped within 60 inches, while flood prone soils cover 9 percent, so a Red Oak Creek crossing needs channel depth planning and a jurisdiction check. High steel corrosion risk is mapped across 87 percent, a concern for steel casing and tracer wire; HDPE is not affected by that soil risk.

What does it take to bore Oak Leaf bedrock?

Austin silty clay and mapped weathered bedrock call for a bore plan that fits the route. Around Red Oak Creek, we also plan the line depth and entry points before drilling.

  1. On an Austin soil route, we choose drilling fluid and staged reaming to manage sticky cuttings that can gather on the reamer.
  2. Where the USDA survey maps bedrock near the surface, we check the ground as the bore advances and allow for slower drilling through Austin Chalk.
  3. For a Red Oak Creek crossing, we plan the bore below the channel and check during planning for U.S. Army Corps of Engineers jurisdiction.
  4. Before drilling near a marked line along Hampton Road, we hydrovac pothole it; a surface mark shows position but does not establish depth.
Trinity Boring Solutions crew in hard hats at the exit pit with rock tooling on a sandstone bore in Guthrie, OK
Our crew at the exit pit with rock tooling on a sandstone bore in Guthrie, Oklahoma.

What is in the way of a new Oak Leaf line near Hampton Road?

No highway runs inside Oak Leaf, but US 77 and Interstate 35 are each 1.0 miles outside the city limits. If a route reaches either right of way, it needs highway permit planning. Hampton Road has 2.76 miles inside the city, Highland Road has 1.44 miles and Locust Drive has 1.24 miles. Those streets offer likely corridors to assess for water, sewer or conduit work, with access and marked utilities checked before choosing bore pits.

CrossingTypeMapped extentWho has a say
US 77Highway nearby1 miles outsideState highway office
Interstate 35Highway nearby1 miles outsideState highway office
Red Oak CreekStream1.85 channel miles insideChecked for Corps of Engineers jurisdiction
Little CreekStream1.31 channel miles insideChecked for Corps of Engineers jurisdiction
Willow BrookStream0.79 channel miles insideChecked for Corps of Engineers jurisdiction
North Grove CreekStream nearby0.3 miles outsideChecked for Corps of Engineers jurisdiction
Elm CreekStream nearby0.5 miles outsideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

Mapped records show no railroad inside Oak Leaf or within 1 mile beyond its limits, and no street and rail crossing is mapped. Red Oak Creek runs 1.85 channel miles in the city, Little Creek 1.31 miles and Willow Brook 0.79 miles. Six street crossings of named streams are mapped, so a route near Red Oak Creek needs careful depth and entry planning. For Oak Leaf work near Red Oak Creek, we have no lakes or ponds mapped within 1 mile.

Who approves an Oak Leaf bore near US 77?

Oak Leaf is incorporated, so its city streets belong to the city itself; no city department or form is named here. US 77 and Interstate 35 sit 1.0 miles beyond the limits, and work in either highway right of way needs a TxDOT utility permit. The line owner, not our drilling crew, files through TxDOT’s RULIS system, and the TxDOT Dallas District reviews it. We prepare the bore plan and profile for the owner’s filing. Highway cover depends on the line: electric and communication crossings need 60 inches, water crossings 60 inches and pressurized sewer crossings 60 inches below the lowest crossed grade. Red Oak Creek crossings also get checked for U.S. Army Corps of Engineers jurisdiction during planning.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

What is already in the ground in Ellis County near Oak Leaf?

The water provider for the specific Oak Leaf address has to be confirmed with the city, Ellis County or the local water district before a bore is planned. For electric service in Ellis County, Oncor Electric Delivery Company, HILCO Electric Cooperative, Navarro County Electric Cooperative and United Electric Cooperative Service report service. We confirm the line owner for the address before planning an electric conduit bore near Hampton Road.

Line ownerWhat it isSourceSize
Oncor Electric Delivery Company, HILCO Electric Cooperative, Navarro County Electric Cooperative and United Electric Cooperative ServiceElectric utilities reporting service in Ellis CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

Oak Leaf’s median housing year is 1986 in the 2019 to 2023 five year estimates; we plan boring around the underground route, not housing age. The survey estimates 72 percent of homes were built from 1960 to 1999 and 28 percent in 2000 or later, with none built before 1960. A replacement bore along Highland Road may need to connect older buried lines, while newer services can call for a different route. We hydrovac pothole each marked utility on the bore path before drilling near it; paint shows position, not depth.

Trinity Boring Solutions crew running a 2 inch conduit directional bore with airport hangars and a parked jet in the background in Oklahoma City
Our crew running a 2 inch conduit bore near the hangars at an Oklahoma City airport.

Where is Oak Leaf in relation to Ovilla?

Oak Leaf is in Ellis County, at an elevation of 600 feet, and covers 2.36 square miles. Its ZIP code is 75154. Glenn Heights is 2.0 miles north and is the nearest larger city; Ovilla is 2.4 miles northwest, and Red Oak is 3.9 miles east. Waxahachie, the county seat, is 8.3 miles south. From our Yukon, Oklahoma main office, Oak Leaf is 238 road miles away and a 4.7 hour drive, so that travel distance is part of planning a job near Hampton Road.

Places near Oak Leaf

What boring work comes up near Oak Leaf’s Highland Road?

  • Highway approach: A route toward US 77 needs right of way review if the Oak Leaf bore enters the highway corridor.
  • Water service: A service near Highland Road can run underground to a property without cutting across the street surface.
  • Fiber route: Conduit along Hampton Road can connect a new line while keeping pavement and driveways intact.
  • Creek crossing: A bore under Red Oak Creek needs a planned depth beneath the channel and a jurisdiction check.
  • Electric conduit: A route near Locust Drive starts with confirming the line owner and exposing marked utilities along the path.
  • Stream crossing: Little Creek has mapped channel length in Oak Leaf, so a crossing plan must account for its location.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

How do I get a quote for Oak Leaf near Red Oak Creek?

For a quote, give us the Oak Leaf address or map pin, what goes underground, the pipe or conduit size, the footage, and any sketch or plans. If the route is near Red Oak Creek, note the crossing and access points so we can assess the channel and bore layout.

Austin silty clay and weathered bedrock are the first scope details to weigh because they affect reaming and drilling time. Red Oak Creek adds crossing depth and access questions, while nearby US 77 can bring right of way permit work into the plan. Pipe or conduit size, route length, marked utilities, pavement, bore pits and excavator time also affect the work. The 238 road miles from Yukon matter when setting mobilization for an Oak Leaf job.

Questions people ask about boring in Oak Leaf

Does Trinity Boring Solutions take directional boring jobs in Oak Leaf, Ellis County?

Yes. We take directional boring work across Texas, including Oak Leaf in Ellis County. Our main office is in Yukon, and we use our crews and vetted partner contractor satellite yards for the work. You stay in contact with Trinity from the first call through the bore log, including on a Hampton Road route.

How old are Oak Leaf’s buried lines near Highland Road?

The American Community Survey 2019 to 2023 estimates place the median housing year at 1986, with 72 percent of homes built from 1960 to 1999 and 28 percent in 2000 or later. A replacement bore along Highland Road may have to connect existing lines; we expose marked utilities before drilling close to them.

Does Austin soil in Oak Leaf corrode steel, and what pipe can I use?

The USDA soil survey maps high steel corrosion risk across 87 percent of Oak Leaf, which makes casing and tracer wire material worth discussing with the line owner. In Oak Leaf’s silty clay, HDPE is not affected by that soil corrosion concern, so we consider it for underground installations. For a route near Locust Drive, the owner chooses any coating for steel components.

What ground does an Oak Leaf bore go through near Austin soil?

The USDA soil survey maps Austin soil across 54 percent of Oak Leaf. At about 40 inches, bedrock is mapped across 66 percent and silty clay across 27 percent, with average clay content of 43 percent. Those mapped patterns are not test borings, so the ground along Hampton Road still needs to be assessed for the planned route.

How much rock is mapped under Oak Leaf, and is it hard?

Bedrock is mapped within 60 inches across 66 percent of Oak Leaf, with a typical depth of 26 inches. The mapped bedrock is weathered, and hard bedrock is not mapped within 60 inches. Austin Chalk is the mapped geologic unit; a bore near Red Oak Creek still needs its own route and depth plan.

Who approves an Oak Leaf bore crossing US 77?

If work enters US 77 right of way, the line owner files for a utility permit through TxDOT’s RULIS system. The TxDOT Dallas District reviews it, and we prepare the bore plan and profile for the owner’s application. US 77 is 1.0 miles outside Oak Leaf’s limits, so confirm whether the proposed route reaches that corridor.

What bore sizes and lengths can Trinity handle near Oak Leaf’s Lariat Circle?

Near US 77 outside Oak Leaf limits, we handle lines from 3/4 inch service lines up to 48 inch casing, with bore lengths from 10 feet to 5,000 feet. A route near Lariat Circle depends on the needed line size, footage, ground and access. A sketch or plan helps us assess the proposed bore.

How much notice does Texas811 need for a bore near Oak Leaf’s Hampton Road?

Paint near Hampton Road shows a utility’s position, not its depth. Texas law requires a locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before it. If marks wear off or move, request refreshed marks through Texas811 before work continues.

What affects the cost of directional boring near Oak Leaf’s US 77?

The route, length and pipe or conduit size matter, as do Austin soil and mapped bedrock, which can change drilling and reaming time. A crossing of Red Oak Creek, pavement, exposed utilities, pits and excavator time can add work. If the route reaches US 77 right of way, permit planning is another factor; mobilization also reflects the 238 road miles from Yukon.

Where the Oak Leaf facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Oak Leaf

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Oak Leaf, Texas

Type the address of your job in Oak Leaf. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Oak Leaf

Same county: Waxahachie · Midlothian · Ennis · Ferris · Palmer · Italy · Maypearl · Garrett · Venus · Milford · Bardwell · Bristol. All counties: Texas county list.