trinityboringsolutions.com

Redwater Texas Directional Boring: Sawyer Soil, US 67 and Union Pacific

Quick Answer: Union Pacific track and US 67 are the hard crossings in Redwater, and Trinity Boring Solutions handles directional boring, also called horizontal directional drilling (HDD), across Texas. The Yukon, Oklahoma main office is 324 road miles away, so a route near Red River Road affects mobilization. Sawyer silt loam covers the largest mapped share, while sandy clay loam and clay at about 40 inches can hold the hole and grip the pipe. We stage reaming and keep the pull moving.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Redwater bores at a glance

  • Incorporated city in Bowie County, Texas. Population 861 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 324 miles, about 6.5 hours of driving.
  • Ground: Sawyer soil is mapped on 35 percent of the area, with sandy clay loam about 40 inches down.
  • Rock: bedrock is mapped within 60 inches on 4 percent of the area.
  • Highways inside the boundary: US 67, FM 991 and FM 3098. State permit office: TxDOT Atlanta District.
  • Railroad track inside the boundary: Union Pacific and U.S. Government track, with 5 mapped street and rail crossings.
  • Named streams inside the boundary: Conn Creek.
  • Public water: City of Redwater, surface water bought from another system.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who does directional boring in Redwater near Union Pacific track?

Redwater is in Bowie County, where the Census Bureau Vintage 2024 estimate puts the city population at 861. We install water, sewer, gas, electric conduit and fiber, routing a new service along Redwater Boulevard or beneath US 67 when the alignment calls for a crossing. The marked route, not the city name alone, guides the bore plan.

Our main office is in Yukon, Oklahoma, and Redwater work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Since 1982, four decades of boring have taught us to manage sticky clay like the deeper soil mapped near Redwater Boulevard; our family business started in 1965.

Compact Ditch Witch drill rig boring a new utility line across a front yard on a residential street in Edmond, Oklahoma
Our compact Ditch Witch drill boring a new utility line across a front yard on a residential street in Edmond, Oklahoma. Photos on this page are from our jobs in Oklahoma and Texas.

What does the soil survey show beneath Redwater and Sawyer soil?

The USDA soil survey maps Sawyer silt loam on 35 percent of Redwater, followed by Ruston fine sandy loam on 31 percent. At about 40 inches, sandy clay loam is mapped under 48 percent of the area, clay under 40 percent and silt loam under 11 percent. The average clay content at that depth is 33 percent. These are mapped soil patterns, not test borings. Clay can cling to the reamer and tighten around pipe, so the actual route still needs attention as drilling proceeds.

USDA soil survey, inside the Redwater city limitsWhat is mapped
Soil series mappedSawyer 35 percent, Ruston 32 percent, Blevins 11 percent, Eylau 8 percent and Thenas 6 percent
Texture at the surfacesilt loam 46 percent, fine sandy loam 42 percent and very fine sandy loam 9 percent
Texture about 40 inches downsandy clay loam 48 percent, clay 40 percent and silt loam 11 percent
Engineering class about 40 inches downfat clay (CH) 40 percent, clayey sand (SC) 37 percent and lean clay (CL) 22 percent
Average clay content about 40 inches down33 percent
Bedrock mapped within 60 inches4 percent of the area (0 percent hard rock, 4 percent weathered rock)
Seasonal water table within 60 inches50 percent of the area
Flood prone soils6 percent of the area
High corrosion risk for uncoated steel48 percent of the area

Seasonal water tables are mapped within 60 inches on 50 percent of the area, while flood prone soils cover 6 percent, a factor to check near Conn Creek. Bedrock is mapped within 60 inches on 4 percent, and none is mapped within 40 inches; the typical depth is 45 inches. High steel corrosion risk is mapped on 48 percent, so the line owner should address casing and tracer wire materials. The geologic map shows clayey, fine to medium sand and fine sandy clay decomposition residuum of Cenozoic age, plus the Paleogene Wilcox Group, undivided. That mix calls for checking the route rather than assuming uniform ground.

How do we drill Redwater’s sandy clay loam?

Redwater’s sandy clay loam and clay at about 40 inches need controlled fluid and staged reaming. We adjust the pass to the ground along the planned route, including streets such as Redwater Boulevard.

  1. Where the 40 percent clay share at about 40 inches is mapped, we use a controlled fluid mix and ream in stages to limit sticky buildup around the tool.
  2. Along Red River Road, we watch fluid returns near pavement and keep pressure controlled so the ground is not lifted by the bore.
  3. Before the last reaming pass near Sawyer silt loam, we have the pipe ready, since wet or loose ground can close in behind the drill.
  4. At a route near Conn Creek, we plan the pits for the mapped seasonal water table and keep the bore depth below the channel crossing.
Reel of 4 inch HDPE conduit on the exit side of a 385 foot directional bore under creeks and wetland in Guthrie, Oklahoma
A reel of 4 inch HDPE conduit on the exit side of a 385 foot bore under creeks and wetland in Guthrie, Oklahoma.

Which roads, tracks or creeks can a Redwater bore cross near US 67?

US 67 runs 1.5 roadway miles within Redwater, while FM 991 covers 1.7 miles and FM 3098 covers 0.8 miles. Those state and US routes can call for a bore beneath the road rather than cutting the pavement. Red River Road is the longest named street at 1.68 miles in the city, followed by Redwater Boulevard at 1.48 miles. South and Longhorn Road each add their own street access points, so the route and pit locations matter even on a shorter service.

CrossingTypeMapped extentWho has a say
US 67US highway1.5 roadway miles insideState highway office
FM 991State highway1.7 roadway miles insideState highway office
FM 3098State highway0.8 roadway miles insideState highway office
Union PacificRailroad1.4 track miles insideThe railroad
U.S. Government trackRailroad1.21 track miles insideThe railroad
Conn CreekStream0.29 channel miles insideChecked for Corps of Engineers jurisdiction
Nettles CreekStream nearby0.2 miles outsideChecked for Corps of Engineers jurisdiction
Elliott CreekStream nearby1 miles outsideChecked for Corps of Engineers jurisdiction
Wright Patman LakeLake or pond16,177 acres, nearbyChecked for Corps of Engineers jurisdiction
Elliott Creek ReservoirLake or pond223 acres, nearbyChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

Union Pacific has 1.4 track miles in Redwater on its Pine Bluff Subdivision, and U.S. Government track adds 1.21 miles. Public mapping shows 5 street and rail crossings inside the city, so a route near either track needs careful coordination. Conn Creek runs 0.29 channel miles through the limits, and one mapped street crossing passes over a named stream. Nettles Creek is 0.2 miles outside the limits; Wright Patman Lake is also within one mile, outside the city. A water crossing needs jurisdiction checked during planning.

Who has to sign off on a Redwater bore in Bowie County?

Redwater’s city streets belong to the city, while US 67, FM 991 and FM 3098 fall under TxDOT highway rules when work uses their right of way. Electric and communication lines crossing a highway need at least 60 inches of cover below the lowest point of the crossed grade and 48 inches along the right of way. Water lines need 60 inches at crossings and 36 inches along the right of way; pressurized sewer needs 60 inches at crossings. The utility owner applies through TxDOT’s RULIS system, and the TxDOT Atlanta District reviews it. We prepare the bore plan and profile for the utility owner’s filing. Highway crossings are bored or tunneled, encased, and on rural highways extend beneath all travel lanes. A Union Pacific crossing needs an agreement with the railroad, which sets casing, depth and flagging. For a Conn Creek crossing, we check for U.S. Army Corps of Engineers jurisdiction during planning.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

What is already in the ground near the City of Redwater system?

The City of Redwater public water system uses purchased surface water and serves 4,356 people through 1,452 service connections. For an electric conduit bore, the electric utilities reporting service in Bowie County are Southwestern Electric Power, Bowie-Cass Electric Cooperative and Southwest Arkansas Electric Cooperative. We confirm the line owner for the specific route before planning the conduit, since the countywide list does not establish which provider serves each address.

Line ownerWhat it isSourceSize
City of RedwaterPublic water systemSurface water bought from another system1,452 connections, 4,356 people served
Southwestern Electric Power, Bowie-Cass Electric Cooperative and Southwest Arkansas Electric CooperativeElectric utilities reporting service in Bowie CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put Redwater’s median housing year at 1984; 17 percent of homes were built before 1960, 60 percent from 1960 to 1999, and 23 percent in 2000 or later. That mix can mean replacement work as well as new service runs along streets such as South. We hydrovac pothole every marked utility on the bore path before drilling near it; for example, a planned line under South needs each marked crossing exposed because paint does not show depth.

Trinity Boring Solutions crew running a 2 inch conduit directional bore with airport hangars and a parked jet in the background in Oklahoma City
Our crew running a 2 inch conduit bore near the hangars at an Oklahoma City airport.

How far is Redwater from Maud and our Yukon office?

Redwater is an incorporated city in Bowie County, covering 1.99 square miles at an elevation of 285 feet. Its ZIP codes are 75567, 75573 and 75501. Maud is 5.6 miles west, while Leary is 7.9 miles north and Hooks is 8.0 miles north. Wake Village, the nearest larger city, is 8.7 miles northeast; New Boston, the county seat, is 11.8 miles northwest. The drive from our Yukon, Oklahoma main office is 324 road miles and 6.5 hours, which affects mobilization for a Redwater route.

Places near Redwater

What kinds of bores come up near Conn Creek in Redwater?

  • Highway crossing: A bore beneath US 67 keeps the roadway surface intact, with depth and casing set through the TxDOT permit process.
  • Water service: A new connection near the City of Redwater system can run beneath Redwater Boulevard rather than across its pavement.
  • Fiber route: A fiber conduit along South can use a bore to avoid opening the street, with marked utilities exposed along the path.
  • Creek crossing: A line near Conn Creek needs a planned depth beneath the channel and a jurisdiction check during crossing review.
  • Rail crossing: A route beneath Union Pacific track needs the railroad’s crossing agreement to set casing, depth and flagging.
  • Acreage service: A longer service toward Maud can be priced around footage, pipe size and the 324 road miles from Yukon.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

How do I get a Redwater quote for work near Red River Road?

For a Red River Road quote, send the address or map pin, what is going in the ground, pipe or conduit size and footage; a sketch or plans help us check the route, utility marks and pit locations before we set a bore plan. The street name helps us distinguish a curbside service from a crossing beneath the road.

The job scope sets the price, with ground, crossings and logistics driving the work. Sawyer clay can mean staged reaming and attention to the pull, while sandy clay loam affects how the hole holds. A route under US 67 or Union Pacific track adds crossing and permit coordination; a Conn Creek route brings water crossing review into planning. Length, pipe size, utilities to expose, pavement, pits, backfill and excavator time all matter. Mobilization also reflects the 324 road miles from Yukon.

Questions people ask about boring in Redwater

Does Trinity Boring Solutions take directional boring work in Redwater and Bowie County?

Yes. We take directional boring work in Redwater, with our own crews and partner contractor satellite yards supporting the work. You deal with Trinity from the first call through the bore log, whichever crew is on site. A route on Redwater Boulevard or near Union Pacific track is planned around the actual crossing and site access.

Can groundwater or flooding near Conn Creek affect bore pits in Redwater?

It can affect pit planning. The USDA soil survey maps a seasonal water table within 60 inches on 50 percent of Redwater and flood prone soils on 6 percent. Near Conn Creek, we account for the channel and wet ground when siting pits, and plan a crossing depth below the channel.

Does Sawyer soil in Redwater pose a corrosion issue for steel pipe?

The survey maps high steel corrosion risk on 48 percent of Redwater, so the line owner should consider the material and any coating for steel casing or tracer wire. HDPE does not have that soil corrosion concern. Sawyer silt loam is the largest mapped soil series, but the owner selects the materials for the line.

What ground does a bore pass through in Redwater’s Sawyer soil areas?

Sawyer silt loam is mapped on 35 percent of Redwater, and about 40 inches down the survey maps sandy clay loam on 48 percent of the area and clay on 40 percent. That deeper clay can stick to the reamer and grip pipe, so staged reaming and a timely pull can matter.

Will a Redwater bore hit rock?

The USDA soil survey maps bedrock within 60 inches on 4 percent of Redwater, with none mapped within 40 inches. The geologic map also shows Cenozoic clayey sand and sandy clay residuum and the Paleogene Wilcox Group, undivided. Those mapped units describe the area, not the exact subsurface at a Redwater bore.

Who approves a bore under US 67 in Redwater?

For work in US 67 right of way, the utility owner applies for the TxDOT utility permit through RULIS, and the TxDOT Atlanta District reviews it. We provide the bore plan and profile for that filing. The permit sets the project requirements, including cover and crossing details for the line type.

Can I reach someone after hours for an urgent bore near South in Redwater?

Yes. Our phone is answered 24 hours a day at (405) 409-7423. If an urgent line issue is near South, call with the location and what service is affected so we can understand the request and discuss the response needed.

How much 811 notice do I need for a Redwater bore near Red River Road?

Texas811 needs the locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days ahead. If a Red River Road start slips more than 14 days past the original notice, make a new request. Have worn or moved marks refreshed through Texas811 before work continues.

What affects the cost of a directional bore under US 67 in Redwater?

The scope drives the price, not one single measurement. Length, pipe size, ground conditions, utilities to expose, pavement, pits, backfill and equipment time all count. A US 67 crossing brings highway coordination, while a route through Sawyer clay may need staged reaming. The 324 road miles from Yukon also affect mobilization.

Where the Redwater facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Redwater

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Redwater, Texas

Type the address of your job in Redwater. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Redwater

Same county: Texarkana · New Boston · De Kalb · Red Lick. All counties: Texas county list.