Rio Hondo Texas Directional Boring: Raymondville Clay Loam, FM 106 and Colorado
Quick Answer: The City of Rio Hondo owns the public water system, while AEP Texas Central, Brownsville Public Utilities Board and Magic Valley Electric Cooperative report county electric service; before a Colorado crossing, we expose marked lines and confirm the conduit owner. We take directional boring, also called horizontal directional drilling (HDD), work in Rio Hondo, Texas, including bores beneath Colorado Avenue. The Yukon main office is 710 road miles away, so a job near FM 106 includes that distance in mobilization planning. Raymondville clay loam and clay mapped about 40 inches down can stick to a reamer, so we plan staged cuts and a prompt pipe pull.
Rio Hondo bores at a glance
- Incorporated city in Cameron County, Texas. Population 2,311 (Census Bureau 2024 estimate).
- Road distance from our Yukon, Oklahoma main office: 710 miles, about 13.9 hours of driving.
- Ground: Raymondville soil is mapped on 35 percent of the area, with clay about 40 inches down.
- Rock: no bedrock is mapped in the top 60 inches.
- Highways inside the boundary: FM 106 and Texas State Highway 345. State permit office: TxDOT Pharr District.
- Railroad track inside the boundary: none mapped.
- Named streams inside the boundary: Colorado.
- Public water: City of Rio Hondo, surface water.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Who does directional boring in Rio Hondo, Cameron County?
The City of Rio Hondo owns the public water system, and electric service in Cameron County is reported by AEP Texas Central, Brownsville Public Utilities Board and Magic Valley Electric Cooperative. We expose marked lines and confirm the conduit owner before a bore near them. Rio Hondo is in Cameron County and has 2,311 residents, according to the Census Bureau Vintage 2024 estimate. We install water, sewer, gas, electric conduit and fiber, including service routes along Colorado Avenue.
Our main office is in Yukon, Oklahoma, and Rio Hondo work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Since 1982, four decades of directional boring have taught us to plan for sticky ground like the clay mapped around Reynolds Road. The family business began in 1965, and we stay involved from the first call through the bore log, whichever crew is on site.

What is Rio Hondo ground like around Raymondville soil?
The USDA soil survey maps Raymondville soil across 35 percent of Rio Hondo, with Raymondville clay loam among the mapped units. At about 40 inches below the surface, clay is mapped across 46 percent of the area, and the average clay content at that depth is 35 percent. Surface textures are mostly sandy clay loam and clay loam. We treat Raymondville and Lyford soil series as mapped patterns, not test borings, when planning Rio Hondo work. On a bore near Reynolds Street, sticky clay can collect on the reamer and grip the pipe, so the plan needs to account for how the hole is opened and when pipe is pulled.
| USDA soil survey, inside the Rio Hondo city limits | What is mapped |
|---|---|
| Soil series mapped | Raymondville 35 percent, Lyford 20 percent, Racombes 20 percent, Mercedes 12 percent and Hidalgo 4 percent |
| Texture at the surface | sandy clay loam 44 percent, clay loam 36 percent and clay 12 percent |
| Texture about 40 inches down | clay 46 percent, sandy clay loam 40 percent and clay loam 5 percent |
| Engineering class about 40 inches down | lean clay (CL) 80 percent and fat clay (CH) 12 percent |
| Average clay content about 40 inches down | 35 percent |
| Bedrock mapped within 60 inches | None mapped |
| Seasonal water table within 60 inches | 43 percent of the area |
| Flood prone soils | 2 percent of the area |
| High corrosion risk for uncoated steel | 87 percent of the area |
Bedrock is not mapped in the top five feet of Rio Hondo, but that mapping does not rule out rock deeper down. The USDA soil survey maps a seasonal water table within 60 inches across 43 percent of the area, so pits near Colorado Avenue may need pumping. Flood prone soils cover 2 percent of the mapped area; a Colorado crossing needs depth planning below the channel. High steel corrosion risk covers 87 percent. The mapped geologic unit is Holocene muddy flood plain alluvium, mostly mud, which calls for attention to fluid returns and ground stability.
How do crews bore Rio Hondo clay?
Raymondville clay loam and clay mapped below Rio Hondo call for controlled reaming, not a rushed pull. On a route near Reynolds Road, we keep the hole manageable, watch the returns and have the pipe ready before the final pass.
- In Raymondville clay loam, we use thinner drilling fluid with polymer and open the hole in stages, limiting the sticky clay that can ball up on the reamer.
- Because clay covers 46 percent of Rio Hondo at about 40 inches, we watch fluid returns near Reynolds Street so pressure does not lift pavement.
- Where the mapped seasonal water table could affect a pit near Colorado Avenue, we keep pits small and pump water as needed.
- Before approaching a marked line near FM 106, we hydrovac expose it; a walkover locator tracks the head and we log its depth and pitch.

What does a Rio Hondo bore have to cross near Colorado?
FM 106 and Texas State Highway 345 run inside Rio Hondo, so a bore along either route has to be planned around state highway right of way. Colorado Avenue is the longest named street in the city at 2.43 miles, followed by Reynolds Street at 1.96 miles and Reynolds Road at 1.75 miles. A route beneath one of these streets can use pits on either side rather than cutting the pavement. The street and highway crossing details determine the bore path and the required approvals.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| FM 106 | State highway | 0.9 roadway miles inside | State highway office |
| Texas State Highway 345 | State highway | 0.7 roadway miles inside | State highway office |
| Colorado | Stream | 1.56 channel miles inside | Checked for Corps of Engineers jurisdiction |
No railroad is mapped inside Rio Hondo or within one mile outside its limits, and public records map no street and rail crossings. The Colorado stream runs 1.56 channel miles through the city, with one mapped street crossing of a named stream. With Colorado inside Rio Hondo, our mapped review shows no lakes or ponds within one mile. A bore near Colorado needs a channel crossing plan, and during planning we check whether the crossing falls under U.S. Army Corps of Engineers jurisdiction.
Do I need a permit to bore under FM 106 in Rio Hondo?
Cover depths set the bore profile under FM 106: electric and communication lines need 60 inches below the lowest crossed grade, while water lines need 60 inches at crossings and pressurized sewer lines need 60 inches. Along the right of way, the listed depths are 48 inches for electric and communication, 36 inches for water, and 60 inches for pressurized sewer crossings. The TxDOT Pharr District reviews the utility permit. The utility owner files through TxDOT’s online RULIS system; we prepare the bore plan and profile for work under that permit. Rio Hondo’s streets, including Colorado Avenue, are city streets. A Colorado stream crossing also needs planning for possible federal jurisdiction. No railroad crossing is mapped in the city.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
What is already in the ground in Rio Hondo by City of Rio Hondo?
The City of Rio Hondo public water system serves 2,640 people through 824 service connections and uses surface water. For a water bore near FM 106, that system’s line location and depth matter before drilling. AEP Texas Central, Brownsville Public Utilities Board and Magic Valley Electric Cooperative report electric service in Cameron County, but those records do not identify the provider at every address. We confirm the line owner before planning an electric conduit bore near Colorado Avenue.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| City of Rio Hondo | Public water system | Surface water | 824 connections, 2,640 people served |
| AEP Texas Central, Brownsville Public Utilities Board and Magic Valley Electric Cooperative | Electric utilities reporting service in Cameron County | EIA Form 861 | Confirm the line owner by address |
In Cameron County, Rio Hondo’s median housing year is 1985; we use site conditions, not housing age, to plan underground work. Of housing units, 14 percent were built before 1960, 64 percent from 1960 to 1999 and 22 percent in 2000 or later. Along Reynolds Street, that mix can mean a replacement bore beside older buried lines or a new service for later housing. We hydrovac expose marked utilities on the route before the drill approaches; paint shows position, not depth.

Where is Rio Hondo in relation to Villa del Sol?
Rio Hondo is an incorporated city in Cameron County, covering 1.69 square miles at an elevation of 28 feet. For addresses along Colorado Avenue, we account for Rio Hondo’s ZIP codes 78583 and 78550 when organizing boring plans. Villa del Sol is 3.0 miles south, and Arroyo Colorado Estates is 3.9 miles southwest. Lozano is 3.9 miles southeast. Harlingen, the nearest larger city, is 7.8 miles southwest; Brownsville, the county seat, is 18.4 miles southeast. Our Yukon, Oklahoma main office is 710 road miles away, a 13.9 hour drive, so that distance is part of planning work near FM 106.
Places near Rio Hondo
- Villa del Sol: 3 miles south
- Arroyo Colorado Estates: 3.9 miles southwest
- Lozano: 3.9 miles southeast
- Arroyo Gardens: 5.6 miles southeast
- La Tina Ranch: 6.7 miles east
- Directional boring in Harlingen: 7.8 miles southwest
What would we bore near Colorado Avenue in Rio Hondo?
- Highway crossing: A bore beneath FM 106 needs a profile that meets the applicable cover depth and fits the TxDOT permit.
- Water service: A connection near the City of Rio Hondo system needs a route checked against existing lines before a new service bore.
- Street crossing: Colorado Avenue offers a place to bore beneath pavement with entry and exit pits on the dirt at either side.
- Creek crossing: The Colorado stream runs through Rio Hondo, so a crossing needs a planned path below the channel and a jurisdiction check.
- Fiber route: Reynolds Street is a local route where conduit can be bored beneath the street rather than opened through pavement.
- Sewer line: Along Reynolds Road, a sewer bore needs a route and profile coordinated with marked utilities and the mapped clay ground.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
What drives the price of a bore near Arroyo Boulevard in Rio Hondo?
Start with where: an address or map pin near Arroyo Boulevard lets us place the route. Then tell us what goes in the ground, such as a water line tied to the City of Rio Hondo system. Give us the pipe or conduit size and footage. A sketch or plans showing a route across Colorado Avenue help us see the crossing and access needs.
Price follows the work. Raymondville clay loam and the clay mapped below Rio Hondo matter first because sticky cuttings can require staged reaming and careful fluid control. Next come length, pipe or conduit size, utilities to expose, pavement, and any Colorado drainage crossing. Pits, excavator time and sand backfill also affect the scope. A route under FM 106 brings state permit planning, while the 710 road miles from Yukon affect mobilization. When a bore crosses Texas State Highway 345, we factor the TxDOT Pharr District into planning for high profile or emergency work.
Questions people ask about boring in Rio Hondo
Does Trinity Boring Solutions take directional boring work in Rio Hondo and Cameron County, and how is it staffed?
Yes. We take directional boring work across Texas, including Rio Hondo in Cameron County. Our main office is in Yukon, Oklahoma, and work is staffed with our own crews or through satellite yards operated by drilling contractor partners we have vetted. You work with Trinity from the first call through the bore log, including a crossing near Colorado Avenue.
As we plan underground work in Cameron County, who runs Rio Hondo’s public water system, and where does its water come from?
The City of Rio Hondo owns and operates the public water system, which uses surface water. In sandy clay loam, we plan utility bores with Rio Hondo’s system serving 2,640 people through 824 service connections. For a proposed water bore near FM 106, the system owner and existing line locations need to be part of the route planning.
Which electric companies report service in Rio Hondo and Cameron County, and who confirms conduit specs?
AEP Texas Central, Brownsville Public Utilities Board and Magic Valley Electric Cooperative report electric service in Cameron County. Those county records do not establish which company serves each Rio Hondo address. Before planning conduit along Reynolds Street, we confirm the line owner and the conduit requirements with the owner.
Who is responsible for Rio Hondo streets like Reynolds Road, and does a bore require cutting one?
Reynolds Road is a city street because Rio Hondo is incorporated. A directional bore can pass beneath the street with pits on each side, avoiding a cut through the pavement. The route and any utilities marked along Reynolds Road still need to be checked before drilling.
What do Rio Hondo homes along Reynolds Street tell us about replacement bores?
Rio Hondo’s median housing year is 1985, according to the American Community Survey 2019 to 2023 five year estimates. Older homes along Reynolds Street may be near lines being replaced, while newer housing can call for a new service route. We expose marked utilities before the drill approaches either type of line.
Could groundwater or flood prone ground affect bore pits near Colorado in Rio Hondo?
It could. The soil survey maps a seasonal water table within 60 inches across 43 percent of Rio Hondo, and flood prone soils across 2 percent. Near the Colorado stream, we plan for a channel crossing and possible water in pits; the crossing is also checked during planning for federal jurisdiction.
How much notice does Texas811 need for a Rio Hondo bore by Colorado Avenue, and what if marks move?
Texas811 needs a locate request at least two working days before excavation, not counting Saturdays, Sundays and legal holidays. For a bore near Colorado Avenue, submit it no earlier than 14 days before work. If the start slips more than 14 days past the original notice, make a new request; have worn or moved marks refreshed through Texas811 before work continues.
How far is Rio Hondo from the Yukon office, and does nearby Harlingen change the job?
Rio Hondo is 710 road miles and a 13.9 hour drive from our Yukon, Oklahoma main office. Harlingen is 7.8 miles southwest, but the job location, access and equipment needs determine the work plan. A route near FM 106 still has to account for mobilization from Yukon and the state highway permit process.
What affects the cost of directional boring in Rio Hondo under FM 106?
The job scope determines the price, including bore length, pipe or conduit size, ground conditions and how many marked utilities need exposure. For FM 106, highway permitting and cover requirements affect planning. Raymondville clay loam, pavement, Colorado drainage crossings, pits, equipment time and mobilization from Yukon can also change the work involved.
Where the Rio Hondo facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside Rio Hondo
- U.S. Census Bureau, TIGER/Line 2024: Rio Hondo boundary, roads, rail lines and streams
- U.S. Census Bureau, Vintage 2024 population estimates: Rio Hondo
- U.S. Census Bureau, American Community Survey 2019 to 2023: Rio Hondo housing units and year built
- Macrostrat geologic map compilation: map units under Rio Hondo
- U.S. EPA Safe Drinking Water Information System: public water systems serving Rio Hondo
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving Cameron County
- U.S. Geological Survey, Elevation Point Query Service: Rio Hondo elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to Rio Hondo
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in Rio Hondo
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in Rio Hondo, Texas
Type the address of your job in Rio Hondo. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
County and State Pages for Rio Hondo
Same county: Brownsville · San Benito · Los Fresnos · La Feria · Cameron Park · Primera · Port Isabel · Laguna Vista · Laureles · Laguna Heights · Combes · La Paloma. All counties: Texas county list.
