trinityboringsolutions.com

Sanger Texas Directional Boring: Clay, Interstate 35, BNSF Railway

Quick Answer: Sanger has 3.17 miles of Willow Street, 3.05 miles of Chapman Road and 2.24 miles of Chapman Drive, with Interstate 35 running through the city. We handle directional boring, also called horizontal directional drilling (HDD), for lines beneath roads and BNSF Railway tracks in Sanger. Our Yukon main office is 168 road miles away, and US 77 is one of the routes to account for in planning. The USDA soil survey maps silty clay at 40 inches across 44 percent of Sanger, where sticky ground can build up on a reamer.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Sanger bores at a glance

  • Incorporated city in Denton County, Texas. Population 10,142 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 168 miles, about 3.3 hours of driving.
  • Ground: Sanger soil is mapped on 52 percent of the area, with silty clay about 40 inches down.
  • Rock: bedrock is mapped within 60 inches on 8 percent of the area.
  • Highways inside the boundary: Interstate 35, Interstate 35 Business, US 77, FM 455 and FM 2164. State permit office: TxDOT Dallas District.
  • Railroad track inside the boundary: BNSF Railway, with 5 mapped street and rail crossings.
  • Named streams inside the boundary: Ranger Branch, Clear Creek, Pond Creek and Duck Creek.
  • Public water: City of Sanger, surface water bought from another system.
  • Electric: City of Sanger municipal electric system.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who does directional boring near Willow Street in Sanger?

We take directional boring work in Sanger, Denton County, where the Census Bureau Vintage 2024 estimate puts the population at 10,142. A water line along Willow Street, sewer work near Chapman Road, or fiber conduit crossing US 77 can be installed by bore to keep the surface intact. We also bore for gas and electric conduit, with the route and existing utilities checked for each job.

Our main office is in Yukon, Oklahoma, and Sanger work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. A 3/4 inch service line near Willow Street and a 48 inch casing for a major crossing sit at opposite ends of our work range. Our family business began in 1965, and we have done directional boring since 1982, serving Sanger and other Texas locations.

Ditch Witch JT922 compact directional drill beside the Trinity Boring Solutions truck at NE 24th Street in Oklahoma City
Our Ditch Witch JT922 compact directional drill beside the Trinity truck on a sleeve bore at NE 24th Street in Oklahoma City. Photos on this page are from our jobs in Oklahoma and Texas.

What is Sanger soil like to bore in Sanger?

The USDA soil survey maps Sanger soil across 52 percent of the city, including Sanger clay map units at 34 percent for 1 to 3 percent slopes and 10 percent for 3 to 5 percent slopes. At about 40 inches below the surface, silty clay covers 44 percent of the mapped area and clay covers 38 percent. Surface clay is mapped across 65 percent, while sandy ground is not mapped at that depth. These are mapped soil patterns, not test borings, so a specific Willow Street route still needs site checks.

USDA soil survey, inside the Sanger city limitsWhat is mapped
Soil series mappedSanger 52 percent, Ponder 9 percent, Burleson 6 percent, Frio 6 percent and Slidell 6 percent
Texture at the surfaceclay 65 percent, clay loam 17 percent and loam 9 percent
Texture about 40 inches downsilty clay 44 percent, clay 38 percent and bedrock 8 percent
Engineering class about 40 inches downfat clay (CH) 87 percent and clayey gravel (GC) 3 percent
Average clay content about 40 inches down47 percent
Bedrock mapped within 60 inches8 percent of the area (8 percent hard rock, 0 percent weathered rock)
Seasonal water table within 60 inches0 percent of the area
Flood prone soils6 percent of the area
High corrosion risk for uncoated steel94 percent of the area

Bedrock is mapped within 60 inches on 8 percent of Sanger, with a typical mapped depth of 26 inches; hard bedrock is mapped in that same share, while weathered bedrock is not mapped. Seasonal water tables are not mapped, but flood prone soils cover 6 percent, so a Ranger Branch crossing needs its own depth and drainage plan. The USDA maps the Pawpaw Formation, Weno Limestone, and Denton Clay, undivided, of Albian age. High steel corrosion risk is mapped across 94 percent, making the line owner’s casing and tracer wire choices important; For Sanger crossings, we distinguish HDPE from steel, since HDPE does not share steel’s corrosion concern underground.

What does it take to bore Sanger silty clay?

Sanger clay can hold the bore open, but it is sticky and may pack onto the reamer. Along a route such as Chapman Road, we adjust fluid and reaming to the ground and keep the pullback ready.

  1. Sanger clay is sticky, so we use a thinner drilling fluid with polymer and ream in stages to limit material packing onto the tools.
  2. With heavy clay mapped in Sanger, we watch fluid returns near pavement and control pressure to avoid lifting the surface.
  3. For a Ranger Branch crossing, we plan depth below the channel and check during planning for possible U.S. Army Corps of Engineers jurisdiction.
  4. Before drilling near a marked line along Willow Street, we hydrovac pothole to expose it, then track and log the drill head’s depth and pitch.
Drilling fluid returns at the entry as the Vermeer D24x40 S3 drills a 385 foot sandstone rock bore in Guthrie, Oklahoma
Drilling fluid coming back to the entry pit as our Vermeer D24x40 drills a 385 foot bore in Guthrie, Oklahoma.

Which Sanger roads, tracks or creeks could a bore cross near BNSF Railway?

Interstate 35, Interstate 35 Business, US 77, FM 455, FM 2164 and FM 1190 run within Sanger. Willow Street is the longest named street at 3.17 miles, followed by Chapman Road at 3.05 miles and Chapman Drive at 2.24 miles. A bore under a state or US highway needs a plan for the road right of way, cover and pavement. The city has 99.22 public road centerline miles, so a route may involve city streets as well as a highway.

CrossingTypeMapped extentWho has a say
Interstate 35Interstate14.6 roadway miles insideState highway office
Interstate 35 BusinessInterstate1.8 roadway miles insideState highway office
US 77US highway11.8 roadway miles insideState highway office
FM 455State highway6.5 roadway miles insideState highway office
FM 2164State highway0.5 roadway miles insideState highway office
FM 1190State highway0.2 roadway miles insideState highway office
BNSF RailwayRailroad6.74 track miles insideThe railroad
Ranger BranchStream2.66 channel miles insideChecked for Corps of Engineers jurisdiction
Clear CreekStream1.65 channel miles insideChecked for Corps of Engineers jurisdiction
Pond CreekStream0.35 channel miles insideChecked for Corps of Engineers jurisdiction
Duck CreekStream0.27 channel miles insideChecked for Corps of Engineers jurisdiction
Moores BranchStream nearby0.4 miles outsideChecked for Corps of Engineers jurisdiction
Willow BranchStream nearby0.6 miles outsideChecked for Corps of Engineers jurisdiction
Boom CreekStream nearby1 miles outsideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

BNSF Railway has 6.74 track miles in Sanger on its Fort Worth Subdivision, and Amtrak uses the track. Five street and rail crossings are mapped in the city, so a proposed route needs to establish whether it approaches a track. Ranger Branch runs 2.66 channel miles and Clear Creek 1.65 miles; six street crossings of named streams are mapped. Ray Roberts Lake is outside the limits, so a crossing there is not a Sanger city route.

Who signs off on Sanger bores in Denton County?

For work on Interstate 35, US 77, or FM 455 right of way in Sanger, TxDOT handles the highway permit through its Dallas District. The utility that owns the line submits the application in TxDOT’s RULIS system; we prepare the bore plan and profile and work under that owner’s permit. TxDOT rules set cover requirements and call for boring or tunneling beneath existing highway pavement. A crossing of BNSF Railway track needs an agreement from the railroad, and TxDOT asks for a copy when the line also occupies highway right of way. For Ranger Branch or another water crossing, planning checks whether the U.S. Army Corps of Engineers has jurisdiction. Because Sanger is incorporated, we recognize its city streets as city property when planning boring access.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Who owns water and electric lines in Sanger under the City of Sanger?

The City of Sanger public water system uses purchased surface water and reports 3,750 service connections serving 10,166 people. The city also owns its municipal electric system, with 2,609 customers reported to EIA. For a conduit route along Willow Street, we use hydrovac potholing to expose marked lines before drilling near them; paint shows a line’s position, not its depth. That check helps identify water and electric conflicts on the actual bore path.

Line ownerWhat it isSourceSize
City of SangerPublic water systemSurface water bought from another system3,750 connections, 10,166 people served
City of Sanger municipal electric systemCity owned electric systemReports to the U.S. Energy Information Administration2,609 customers reported
Oncor Electric Delivery Company, Texas-New Mexico Power, City of Denton, Cooke County Electric Cooperative Association, Denton County Electric Cooperative, Tri-County Electric Cooperative and Wise Electric CooperativeElectric utilities reporting service in Denton CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put Sanger’s median housing year at 2003; 6 percent of units were built before 1960 and 56 percent in 2000 or later. That mix can mean work near older lines as well as new services around Chapman Road. Before a drill approaches a marked utility, we daylight it with hydrovac and log the drill head’s depth and pitch as the bore advances.

Yellow polyethylene gas pipe pulled through a directional bore beside a commercial building
Yellow polyethylene gas pipe pulled through a directional bore beside a commercial building.

What is near Sanger and how far is Denton?

Sanger is an incorporated city in Denton County, at an elevation of 715 feet and covering 11.76 square miles. Its ZIP code is 76266. Valley View is 6.6 miles north, Road Runner is 8.5 miles northeast, Krum is 8.8 miles southwest, and Denton is 11.5 miles south. Denton is both the nearest larger city and the county seat. From Trinity’s Yukon, Oklahoma main office, the road distance is 168 miles and the drive is 3.3 hours, which factors into mobilization for work around Sanger.

Places near Sanger

What boring work comes up near Ranger Branch in Sanger?

  • Highway crossing: A bore beneath Interstate 35 or US 77 keeps the roadway surface uncut, with the route designed for the applicable TxDOT permit.
  • Water service: A connection to the City of Sanger system can be bored along Willow Street, with existing water lines exposed before the drill approaches.
  • Fiber conduit: A route near Chapman Road can carry fiber below the pavement, with the conduit size and footage set from the project plans.
  • Creek crossing: A bore near Ranger Branch needs a channel depth plan and a check for U.S. Army Corps of Engineers jurisdiction.
  • Rail crossing: A proposed bore beneath BNSF Railway track needs the railroad’s crossing agreement and a plan that follows its conditions.
  • Electric conduit: Near US 77, the City of Sanger owns the municipal electric system, so the line owner is identified before a conduit route is planned.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What should I send for a Sanger bore near Interstate 35?

For a bore near Interstate 35 or Willow Street, send the address or map pin, what will go in the ground, the pipe or conduit size, and the footage; a sketch or plans help. Tell us which road, track, or creek the route approaches so we can scope the crossing and access. For Sanger projects, we keep Trinity involved from the first call through the bore log, regardless of which crew is on site.

Price is shaped by the route and the work it takes, not just the footage. The 168 road miles from Yukon affect mobilization, while Sanger clay can change the fluid plan and staged reaming. A route under Interstate 35 or BNSF Railway adds crossing requirements; utilities to expose, pavement, creek or drainage crossings, pits, excavator time and sand backfill also matter. On Sanger city street work, we allow for high profile or emergency conditions because either can change the boring scope. The address and route details show which of those factors apply in Sanger.

Questions people ask about boring in Sanger

Does Trinity take directional boring jobs in Sanger, Denton County, and how are crews assigned?

Yes. We take work in Sanger, Denton County, and the job is handled by our own crews or crews from satellite yards operated by drilling contractor partners we have vetted. The customer works with Trinity from the first call through the bore log, even when a partner crew is on site near Willow Street.

Does Sanger soil in Sanger corrode steel, and what pipe should I use?

The USDA soil survey maps high steel corrosion risk across 94 percent of Sanger, so the line owner should consider the material and coating for steel casing or tracer wire. For Sanger crossings, we distinguish HDPE from steel, since HDPE does not share steel’s corrosion concern underground. Along Chapman Road, the suitable pipe depends on the line and project design, not the soil map alone.

What ground does a Sanger soil bore in Sanger pass through?

The USDA soil survey maps Sanger soil across 52 percent of the city. At about 40 inches, silty clay is mapped across 44 percent and clay across 38 percent. Those mapped patterns suggest sticky ground that can cling to a reamer, but they are not test borings for a specific route such as Willow Street.

Is there rock near the surface on a Sanger bore?

The USDA soil survey maps bedrock within 60 inches on 8 percent of Sanger, with a typical depth of 26 inches; hard bedrock is mapped in 8 percent, and weathered bedrock is not mapped. A bore near FM 455 still needs site information because the map describes broad ground patterns, not the exact conditions along a planned path.

Who approves a Sanger bore under Interstate 35?

TxDOT’s Dallas District reviews the utility permit for work in Interstate 35 right of way in Sanger. The utility owner files through RULIS, while we supply the bore plan and profile and work under the permit issued to that owner. The plan must account for highway cover and installation requirements.

What does a Sanger bore under BNSF Railway track need?

A bore under BNSF Railway track in Sanger needs a crossing agreement from the railroad that owns it. For Sanger city street crossings, we use the agreement to set casing, depth and flagging conditions before boring begins. The railroad has 6.74 track miles in the city, so the proposed route must be checked against the actual track location.

How early should I call Texas811 for a Sanger bore along Willow Street?

The excavator or contractor arranging the bore along Willow Street must contact Texas811 at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days ahead. For Sanger city street work, we submit a new request if the start moves more than 14 days past the original notice. Worn or moved marks need refreshing through Texas811 before work continues.

How far is Sanger from Yukon, and does Denton affect the job?

Sanger is 168 road miles and a 3.3 hour drive from Trinity’s Yukon, Oklahoma main office. That distance can affect mobilization for a bore near Denton, which is 11.5 miles south of Sanger. The route, equipment, ground and crossings determine how the distance factors into the work.

What affects the cost of directional boring in Sanger near Interstate 35?

For Sanger boring work, we base the price on the job scope, rather than letting any single factor decide it. Distance from Yukon, Sanger clay, pipe size and bore length all matter. A route beneath Interstate 35 or BNSF Railway may require additional crossing planning, and utility exposure, pavement, creek crossings, pits, excavator time, sand backfill and emergency conditions can also change the work involved.

Where the Sanger facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Sanger

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Sanger, Texas

Type the address of your job in Sanger. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Sanger

Same county: Lewisville · Frisco · Carrollton · Flower Mound · Little Elm · The Colony · Dallas · Corinth · Fort Worth · Highland Village · Trophy Club · Roanoke. All counties: Texas county list.