trinityboringsolutions.com

Aubrey Texas Directional Boring: Gasil Fine Sandy Loam, US 377 and Aubrey Branch

Quick Answer: Gasil fine sandy loam covers much of Aubrey, while clayier layers can grip a reamer. We take directional boring, also called horizontal directional drilling (HDD), for crossings on US 377 and Aubrey streets. The Yukon, Oklahoma main office is 186 road miles away, so a Sherman Drive job includes mobilization in the plan. At about 40 inches, sandy clay loam is mapped across 47 percent of the area; sticky clay calls for staged reaming and careful fluid control.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Aubrey bores at a glance

  • Incorporated city in Denton County, Texas. Population 8,843 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 186 miles, about 3.7 hours of driving.
  • Ground: Gasil soil is mapped on 33 percent of the area, with sandy clay loam about 40 inches down.
  • Rock: bedrock is mapped within 60 inches on 8 percent of the area.
  • Highways inside the boundary: US 377, FM 428, FM 3524, FM 424 and FM 1385. State permit office: TxDOT Dallas District.
  • Railroad track inside the boundary: Union Pacific, with 4 mapped street and rail crossings.
  • Named streams inside the boundary: Aubrey Branch and Running Branch.
  • Public water: City of Aubrey, groundwater wells.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who can I call for directional boring in Aubrey, Denton County?

Aubrey is in Denton County, where the Census Bureau Vintage 2024 estimate puts the population at 8,843. We take water, sewer, gas, electric conduit and fiber bores along streets such as Sherman Drive and Spring Hill Road, or across US 377 where a route needs to pass beneath the highway. The path and line size shape the drilling plan.

Our main office is in Yukon, Oklahoma, and Aubrey work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our family business began in 1965, and we have drilled directionally since 1982; a service run near Aubrey Branch could call for anything from a 3/4 inch line to 48 inch casing.

Ditch Witch directional drill rig with a loaded drill rod rack staged at a commercial jobsite
Our Ditch Witch directional drill with a full rack of drill rod staged at a commercial site. Photos on this page are from our jobs in Oklahoma and Texas.

What is Aubrey ground like around Gasil soil?

The USDA soil survey maps Gasil across 33 percent of Aubrey, and Gasil fine sandy loam, 1 to 3 percent slopes, makes up 31 percent of the mapped area. Fine sandy loam is the main surface texture, covering 70 percent. At about 40 inches, sandy clay loam is mapped across 47 percent, while clay is mapped across 27 percent. Average clay content at that depth is 36 percent, and 46 percent of the area is mapped as heavy clay. These are mapped soil patterns, not test borings; sticky clay can build on a reamer and grip pipe.

USDA soil survey, inside the Aubrey city limitsWhat is mapped
Soil series mappedGasil 33 percent, Callisburg 13 percent, Konsil 13 percent, Heiden 7 percent and Kaufman 7 percent
Texture at the surfacefine sandy loam 70 percent, clay 21 percent and clay loam 7 percent
Texture about 40 inches downsandy clay loam 47 percent, clay 27 percent and sandy clay 18 percent
Engineering class about 40 inches downlean clay (CL) 66 percent and fat clay (CH) 27 percent
Average clay content about 40 inches down36 percent
Bedrock mapped within 60 inches8 percent of the area (0 percent hard rock, 8 percent weathered rock)
Seasonal water table within 60 inches1 percent of the area
Flood prone soils8 percent of the area
High corrosion risk for uncoated steel50 percent of the area

The USDA soil survey places weathered bedrock within 60 inches across 8 percent of Aubrey, with a typical mapped depth of 38 inches, so those areas may slow a bore. A seasonal water table is mapped within 40 inches across 1 percent, while flood prone soils cover 8 percent; Aubrey Branch deserves depth planning. High steel corrosion risk is mapped across 50 percent, a concern for uncoated steel casing and tracer wire that does not apply to HDPE. The geologic map names Pleistocene alluvial gravel, sand, silt, and clay and the Cenomanian Woodbine Formation, so conditions may change with depth.

What does it take to bore Aubrey sandy clay loam?

Aubrey’s sandy clay loam over clay calls for a bore plan that controls the hole without pushing fluid into nearby pavement. Along Sherman Drive or US 377, the route and marked utilities guide the setup.

  1. Gasil fine sandy loam lies over clay in parts of Aubrey, so we ream in stages and use a fluid mix suited to sticky ground before pulling pipe.
  2. Where the Aubrey soil survey maps heavy clay, we watch the fluid returns and keep pressure controlled to reduce the chance of lifting pavement near Sherman Drive.
  3. Before a bore approaches a marked City of Aubrey water line or electric conduit, we hydrovac pothole to check its depth and position.
  4. At a US 377 crossing, we track the drill head from the surface, log depth and pitch, and place pits beyond the pavement rather than cutting across it.
Walkover locator at the edge of the wetland on a directional bore at the Cimarron site in Logan County, Oklahoma
Walkover locator at the edge of a wetland on a directional bore in Logan County, Oklahoma.

Which roads, tracks or creeks could a bore cross in Aubrey near Sherman Drive?

US 377 has 4.3 mapped roadway miles inside Aubrey, alongside FM 428, FM 3524, FM 424, FM 1385 and FM 2931. A crossing beneath those state or US routes needs a plan for highway right of way. Sherman Drive is the longest named street at 4.27 miles, followed by Spring Hill Road at 2.93 miles and Blackjack Road at 2.41 miles. Byran Road adds another 1.35 miles. Those street runs can shape the bore alignment and access for the entry and exit pits.

CrossingTypeMapped extentWho has a say
US 377US highway4.3 roadway miles insideState highway office
FM 428State highway5.7 roadway miles insideState highway office
FM 3524State highway1.8 roadway miles insideState highway office
FM 424State highway0.3 roadway miles insideState highway office
FM 1385State highway0.2 roadway miles insideState highway office
FM 2931State highway0.2 roadway miles insideState highway office
Union PacificRailroad2.65 track miles insideThe railroad
Aubrey BranchStream0.86 channel miles insideChecked for Corps of Engineers jurisdiction
Running BranchStream0.39 channel miles insideChecked for Corps of Engineers jurisdiction
Pecan CreekStream nearby0.2 miles outsideChecked for Corps of Engineers jurisdiction
Little Elm CreekStream nearby0.6 miles outsideChecked for Corps of Engineers jurisdiction
Bray BranchStream nearby0.6 miles outsideChecked for Corps of Engineers jurisdiction
Doe BranchStream nearby1 miles outsideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

Union Pacific has 2.65 track miles inside Aubrey, and public mapping shows four street and rail crossings. A route beneath the Union Pacific track needs coordination with the railroad. Aubrey Branch runs 0.86 channel miles in the city, and Running Branch runs 0.39; five mapped street crossings intersect named streams. Pecan Creek is 0.2 miles from the city limits. No lakes or ponds are mapped within one mile, so creek and track crossings are the main mapped features to consider.

Who approves an Aubrey bore near Union Pacific or US 377?

Aubrey’s city streets belong to the city, while a bore in the right of way of US 377 or FM 428 needs a TxDOT utility permit. The line owner, not the drilling contractor, files through TxDOT’s online RULIS system; we provide the bore plan and profile for the filing, and the TxDOT Dallas District reviews it. TxDOT rules set cover depths for highway crossings: electric and communication lines need 60 inches below the lowest point of the crossed grade, while water and pressurized sewer lines also need 60 inches at crossings. A Union Pacific crossing needs an agreement with the railroad, which sets casing, depth and flagging. Aubrey Branch is checked for U.S. Army Corps of Engineers jurisdiction during planning.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Who owns the lines near the City of Aubrey water system?

The City of Aubrey public water system uses groundwater wells and reports 1,624 service connections serving 4,058 people. A bore near its water lines needs marked utilities exposed before drilling gets close. Denton County electric service is reported by Oncor Electric Delivery Company, Texas-New Mexico Power, City of Denton, Cooke County Electric Cooperative Association, Denton County Electric Cooperative, Tri-County Electric Cooperative and Wise Electric Cooperative. We confirm the owner of the line along the planned route before sizing an electric conduit bore.

Line ownerWhat it isSourceSize
City of AubreyPublic water systemGroundwater wells1,624 connections, 4,058 people served
Oncor Electric Delivery Company, Texas-New Mexico Power, City of Denton, Cooke County Electric Cooperative Association, Denton County Electric Cooperative, Tri-County Electric Cooperative and Wise Electric CooperativeElectric utilities reporting service in Denton CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put Aubrey’s median housing year at 2011; 76 percent of homes were built in 2000 or later, 21 percent from 1960 to 1999 and 3 percent before 1960. A new service near Spring Hill Road may need a different route than a replacement near older housing. Before a bore approaches a marked water or electric line, hydrovac potholing exposes it; paint shows location, not depth.

Hydrovac truck and boring equipment staged beside an airport taxiway for utility daylighting in Oklahoma City
Our hydrovac truck and boring equipment beside an airport taxiway in Oklahoma City, set up to expose a utility crossing.

How far is Aubrey from Little Elm and our Yukon office?

Aubrey is in Denton County at elevation 682 feet and covers 3.71 square miles. Its ZIP codes are 76227 and 76258. Krugerville is 2.2 miles south, Providence Village is 5.1 miles south, and Pilot Point is 6.3 miles north. The nearest larger city, Little Elm, is 8.7 miles southeast; Denton, the county seat, is 11.3 miles southwest. The Yukon, Oklahoma yard is 186 road miles away, with a 3.7 hour drive, so distance is part of planning mobilization for a Sherman Drive project.

Places near Aubrey

What would we bore near Aubrey’s Spring Hill Road?

  • Highway crossing: A bore beneath US 377 follows a planned route below the travel lanes, with pits placed off the pavement.
  • Water service: A connection near the City of Aubrey system starts with locating and exposing marked water lines along streets such as Spring Hill Road.
  • Fiber route: A fiber conduit along Sherman Drive can pass beneath pavement and driveways without opening a trench across the traveled surface.
  • Rail crossing: A route beneath the 2.65 miles of Union Pacific track in Aubrey needs railroad coordination and an agreed casing plan.
  • Creek crossing: A bore near Aubrey Branch can pass beneath the channel, with depth planning and a jurisdiction check during planning.
  • Street utility bore: Along Byran Road, a water, sewer or electric conduit run can be planned around marked lines and the access available for pits.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What drives the price of directional boring near Aubrey’s Byran Road?

For a quote, send the Aubrey address or map pin, what is going in the ground, the pipe or conduit size and footage; a sketch or plans help. Mark whether the route reaches US 377, Sherman Drive or another feature, so we can assess access and crossings.

The job scope sets the price, with Gasil soil and the clay mapped below it affecting drilling time and reaming. Length, pipe or conduit size, and soil or rock all matter. Crossings and exposed utilities can add work, especially at US 377, the Union Pacific track or Aubrey Branch. Pavement, pits, excavator time and sand backfill shape the setup. Mobilization also reflects the 186 road miles from Yukon, and high profile or emergency work can change the plan.

Questions people ask about boring in Aubrey

Does Trinity Boring Solutions take directional boring work in Aubrey, Denton County?

Yes. We take directional boring work in Aubrey, with our own crews and vetted partner drilling contractors working from satellite yards. You deal with Trinity from the first call through the bore log, whichever crew is on site. For a route near Sherman Drive, the proposed line and crossing details help shape the plan.

Who approves a bore under US 377 in Aubrey?

For work in the US 377 right of way, the line owner applies for a TxDOT utility permit through RULIS, and the TxDOT Dallas District reviews it. We prepare the bore plan and profile for the line owner’s filing. TxDOT rules call for 60 inches of cover for electric, communication and water lines at crossings.

What does an Aubrey bore beneath Union Pacific track require?

A crossing beneath Union Pacific track needs an agreement with the railroad. That agreement sets the casing, depth and flagging requirements for the crossing. Aubrey has 2.65 track miles mapped inside the city, so the route needs to be checked against the railroad location before the bore plan is set.

Can a line be bored under Aubrey Branch in Aubrey?

Yes, a line can be planned to pass beneath Aubrey Branch, which has 0.86 channel miles inside Aubrey. The crossing needs a depth plan that stays beneath the channel. During planning, the route is checked for U.S. Army Corps of Engineers jurisdiction.

Who runs Aubrey’s public water system, and where does its water come from?

The City of Aubrey runs the public water system, which draws from groundwater wells. It reports 1,624 service connections serving 4,058 people. If a proposed bore near Spring Hill Road approaches a marked water line, we expose it by hydrovac potholing before drilling nearby.

Who owns electric lines in Aubrey and Denton County, and who confirms conduit specs?

Utilities reporting electric service in Denton County include Oncor Electric Delivery Company, Texas-New Mexico Power, City of Denton, Cooke County Electric Cooperative Association, Denton County Electric Cooperative, Tri-County Electric Cooperative and Wise Electric Cooperative. The serving line owner is confirmed for the Aubrey address and route; that owner can confirm conduit requirements before the bore is planned.

How far is Aubrey from Yukon, and does Little Elm affect the job?

Aubrey is 186 road miles from our Yukon, Oklahoma main office, with a 3.7 hour drive. Little Elm is 8.7 miles southeast of Aubrey. Mobilization distance is one part of the job scope, along with the route, ground and crossings such as US 377 or the Union Pacific track.

How early should I request utility locates for a bore near Sherman Drive in Aubrey?

Request a Texas811 locate at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before work starts. If the start slips more than 14 days past the original notice for a Sherman Drive bore, submit a new request. Have worn or moved marks refreshed through Texas811 before work continues.

What affects the cost of directional boring near US 377 in Aubrey?

The scope drives the price, not just the length. For an Aubrey route near US 377, factors include pipe or conduit size, Gasil soil and deeper clay, pavement, utilities crossed and exposed, and access for pits or excavator work. A Union Pacific or Aubrey Branch crossing and mobilization from Yukon can also affect the job.

Where the Aubrey facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Aubrey

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Aubrey, Texas

Type the address of your job in Aubrey. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Aubrey

Same county: Denton · Lewisville · Frisco · Carrollton · Flower Mound · The Colony · Dallas · Corinth · Fort Worth · Highland Village · Trophy Club · Roanoke. All counties: Texas county list.