Seabrook Texas Directional Boring: Verland Silty Clay, Pine Gully and Union Pacific
Quick Answer: Can you get a line under Texas State Highway 146 without cutting it? We take directional boring jobs in Seabrook, also called horizontal directional drilling (HDD), to install lines beneath crossings. Seabrook is 489 road miles from our Yukon, Oklahoma main office, and the Union Pacific track is one local crossing to plan around. The USDA soil survey maps clay at depth near Pine Gully, where sticky cuttings can build on a reamer. We adjust the drilling fluid and ream in stages to suit that ground.
Seabrook bores at a glance
- Incorporated city in Harris County, Texas. Population 13,976 (Census Bureau 2024 estimate).
- Road distance from our Yukon, Oklahoma main office: 489 miles, about 9.6 hours of driving.
- Ground: Verland soil is mapped on 10 percent of the area, with clay about 40 inches down.
- Rock: no bedrock is mapped in the top 60 inches.
- Highways inside the boundary: Texas State Highway 146. State permit office: TxDOT Houston District.
- Railroad track inside the boundary: Union Pacific, with 1 mapped street and rail crossings.
- Named streams inside the boundary: Pine Gully and Taylor Bayou.
- Public water: City of Seabrook, surface water bought from another system.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Who can I call for directional boring in Seabrook and Harris County?
In Seabrook, can we install a line beneath a road, track, or creek without cutting the surface? We take directional boring work in Seabrook, Harris County, including beneath roads such as Bayport Boulevard. The Census Bureau Vintage 2024 estimate puts the city population at 13,976. We install water, sewer, gas, electric conduit and fiber lines, with the route and size planned for the crossing.
Our main office is in Yukon, Oklahoma, and Seabrook work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. We are a family business that started in 1965, and we have done directional boring since 1982. For a route by Pine Gully, our equipment range covers 3/4 inch service lines through 48 inch casing and bores from 10 feet to 5,000 feet.

What does the USDA soil survey show for Verland soil in Seabrook?
The USDA soil survey maps Verland as 10 percent of the soil series in Seabrook. It identifies Verland Urban land complex on 7 percent of mapped area and Verland silty clay loam on 4 percent. At about 40 inches below the surface, clay is the leading texture: the survey reports an average clay content of 41 percent, and heavy clay covers 20 percent of the mapped area at that depth. For Seabrook clay, we treat these as mapped patterns, not test borings. Along streets such as Todville Road, sticky clay can ball up on a reamer and grip pipe.
| USDA soil survey, inside the Seabrook city limits | What is mapped |
|---|---|
| Soil series mapped | Verland 10 percent and Texla 4 percent |
| Texture at the surface | loam 11 percent, silt loam 4 percent and silty clay loam 4 percent |
| Texture about 40 inches down | clay 11 percent, clay loam 9 percent and silty clay loam 4 percent |
| Engineering class about 40 inches down | fat clay (CH) 20 percent and lean clay (CL) 4 percent |
| Average clay content about 40 inches down | 41 percent |
| Bedrock mapped within 60 inches | None mapped |
| Seasonal water table within 60 inches | 16 percent of the area |
| Flood prone soils | 1 percent of the area |
| High corrosion risk for uncoated steel | 17 percent of the area |
Along Pine Gully, the USDA soil survey does not map bedrock in the top five feet, though that does not rule out deeper rock. A seasonal water table is mapped within 40 inches across 16 percent of the area, so pits near wet ground may need pumping. Flood prone soils cover 1 percent. High steel corrosion risk is mapped across 17 percent, a concern for uncoated casing or tracer wire. The geologic map identifies the Pleistocene Beaumont Formation, predominantly clay, which can hold a hole open but become sticky during reaming.
What does it take for us to bore Seabrook clay beneath local streets?
Seabrook’s clay calls for control of fluid and careful reaming. Near Pine Gully or streets with heavy clay, we watch the returns and keep pressure suited to the ground so the hole stays manageable.
- On a Bayport Boulevard route through mapped Verland silty clay loam, we use thinner drilling fluid with polymer to limit sticky buildup on the reamer.
- Where Seabrook’s heavy clay is mapped, we watch fluid returns and ream in stages to manage pressure beneath pavement near Texas State Highway 146.
- For a Pine Gully crossing, we plan the bore depth beneath the channel and check jurisdiction during planning before setting the route.
- Near a seasonal water table mapped within 40 inches, we keep pits small and ready to pump, especially along a Todville Road alignment.

Which roads, tracks or creeks can a Seabrook bore cross near Pine Gully?
Texas State Highway 146 runs 3.6 mapped roadway miles inside Seabrook, making it a key route to consider for a crossing without opening the pavement. Bayport Boulevard runs 3.17 miles in the city, Todville Road 3.52 miles, and Red Bluff Road 2.4 miles. The streets give a project its local route context, while the highway adds a state right of way to plan for. A bore alignment can keep pavement intact, with entry and exit pits placed beyond the crossing where the site allows.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| Texas State Highway 146 | State highway | 3.6 roadway miles inside | State highway office |
| Union Pacific | Railroad | 0.36 track miles inside | The railroad |
| Port Terminal Railroad Association | Railroad nearby | 0.1 miles outside | The railroad |
| a short line railroad (reporting mark nan) | Railroad nearby | 0.5 miles outside | The railroad |
| Pine Gully | Stream | 2.01 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Taylor Bayou | Stream | 0.26 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Clear Creek | Stream nearby | Along the boundary | Checked for Corps of Engineers jurisdiction |
| Jarbo Bayou | Stream nearby | 0.4 miles outside | Checked for Corps of Engineers jurisdiction |
| Clear Lake | Lake or pond | 772 acres, inside | Checked for Corps of Engineers jurisdiction |
| Taylor Lake | Lake or pond | 394 acres, inside | Checked for Corps of Engineers jurisdiction |
Union Pacific has 0.36 track miles inside Seabrook, and public mapping records one street and rail crossing in the city. Pine Gully runs 2.01 channel miles within the limits, while Taylor Bayou accounts for 0.26 miles; one street crossing of a named stream is mapped. Clear Lake and Taylor Lake are also inside the city. A creek or lake route needs its own depth and access plan, and water crossing jurisdiction is checked during planning.
Who approves a Seabrook bore near Union Pacific and Highway 146?
For a bore beneath Texas State Highway 146, the line owner applies for the TxDOT utility permit through RULIS, and the TxDOT Houston District reviews it. For Seabrook’s public water system, we prepare the bore plan and profile for the utility owner and work under its permit. TxDOT rules call for boring or tunneling beneath existing highway pavement; the permit sets the required depth. A crossing of Union Pacific track needs an agreement with the railroad, which sets conditions such as casing, depth and flagging. Seabrook city streets belong to the city. A Pine Gully crossing is checked for U.S. Army Corps of Engineers jurisdiction during planning.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
Can we identify who owns the lines near the City of Seabrook water system in Seabrook?
The City of Seabrook public water system uses purchased surface water and reports 7,088 service connections serving 13,560 people. That network matters when planning a water line near Todville Road: we expose marked utilities on the bore path with hydrovac potholing before drilling close by. CenterPoint Energy, Entergy Texas and San Bernard Electric Cooperative report electric service in Harris County. We confirm the electric line owner for the particular route before planning a conduit bore.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| City of Seabrook | Public water system | Surface water bought from another system | 7,088 connections, 13,560 people served |
| CenterPoint Energy, Entergy Texas and San Bernard Electric Cooperative | Electric utilities reporting service in Harris County | EIA Form 861 | Confirm the line owner by address |
We use the American Community Survey 2019 to 2023 five year estimates: Seabrook’s median housing year is 1991, relevant context for underground work. The estimates show 2 percent of homes built before 1960, 65 percent from 1960 to 1999 and 33 percent in 2000 or later. That mix can mean a job is replacing an older service or extending a newer one along Red Bluff Road. Before the drill approaches marked lines, hydrovac potholing exposes them; paint shows position, not depth.

What is near Seabrook, including La Porte?
Seabrook is an incorporated city in Harris County, with an elevation of 13 feet and 4.91 square miles of land. ZIP code 77586 covers the city. Shoreacres is 2.5 miles northwest, while El Lago is 3.6 miles southwest and Taylor Lake Village is 4.1 miles west. La Porte, the nearest larger city, is 6.1 miles northwest; Houston, the county seat, is 27.3 miles northwest. Our Yukon yard is 489 road miles away, a 9.6 hour drive, so that distance is part of planning a Bayport Boulevard project.
Places near Seabrook
- Shoreacres: 2.5 miles northwest
- El Lago: 3.6 miles southwest
- Taylor Lake Village: 4.1 miles west
- Directional boring in Clear Lake Shores: 4.3 miles southwest
- Directional boring in Kemah: 4.9 miles south
- Directional boring in La Porte: 6.1 miles northwest
Which jobs call for a bore near Seabrook’s Bayport Boulevard?
- Highway crossing: A water line beneath Texas State Highway 146 can avoid cutting pavement, with the route planned for TxDOT review.
- Water service: A connection near the City of Seabrook system needs the marked water and other utilities exposed before the drill approaches.
- Fiber drop: A fiber conduit along Red Bluff Road can pass beneath driveways without opening each paved entrance.
- Creek crossing: A bore beneath Pine Gully needs a route planned below the channel and a jurisdiction check during planning.
- Rail crossing: A conduit beneath the Union Pacific track requires coordination around the railroad agreement and its crossing conditions.
- Drainage route: A line near Taylor Bayou can be bored beneath the channel, with wet ground and pit access included in planning.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
What should I send for a Seabrook bore near Texas State Highway 146?
For a quote near Texas State Highway 146, start with the address or map pin so we can place the route. Tell us what will go underground, such as water service or fiber, then give the pipe or conduit size and footage. A sketch or plans help show whether the route approaches Pine Gully, a street or the Union Pacific track.
Seabrook is 489 road miles from our Yukon yard, so mobilization is one part of the job scope. Verland clay can affect drilling fluid and reaming; the size and length of the line also matter. A crossing of Texas State Highway 146 or Union Pacific track brings added planning, as can utilities that need exposure, pavement, creek access, pits, excavator time and sand backfill. High profile or emergency work can also change the work plan.
Questions people ask about boring in Seabrook
Does Trinity take directional boring jobs in Seabrook and Harris County, and who staffs them?
Yes, we take Seabrook work in Harris County and use our own crews or crews from partner drilling contractors we have vetted. The main office remains in Yukon, Oklahoma. Whether the route is along Bayport Boulevard or toward Pine Gully, you work with Trinity from the first call through the bore log.
Will a Seabrook bore hit rock below Todville Road?
The soil survey does not map bedrock in the top five feet in Seabrook, but that does not rule out deeper rock. The geologic map shows the Pleistocene Beaumont Formation, predominantly clay. For a route near Todville Road, the actual ground still needs to be considered when setting the bore plan.
Who approves our planned bore beneath Texas State Highway 146 in Seabrook?
The utility owner submits the application for work on Texas State Highway 146 through TxDOT’s online RULIS system. The TxDOT Houston District reviews it, and we provide the bore plan and profile for the owner’s application. For Texas State Highway 146, we follow TxDOT rules calling for boring or tunneling beneath existing highway pavement.
What does a Seabrook bore under Union Pacific track need?
A crossing beneath the Union Pacific track needs an agreement with the railroad that owns it. The agreement sets conditions such as casing, depth and flagging. With 0.36 track miles mapped inside Seabrook, the exact track location and proposed route determine the crossing plan.
Can a line be bored under Pine Gully in Seabrook?
Yes, a bore can be planned beneath Pine Gully, which has 2.01 channel miles inside Seabrook. The route needs to pass below the channel, and the crossing is checked for U.S. Army Corps of Engineers jurisdiction during planning. Ground conditions and access for entry and exit pits also shape the plan.
Can we identify who runs Seabrook’s public water system and where its purchased surface water comes from?
The City of Seabrook owns the public water system, which uses purchased surface water; we plan underground work with that ownership clear. It reports 7,088 service connections and serves 13,560 people. For a new water route near Red Bluff Road, we expose marked utilities before drilling close to them.
Can I reach Trinity after hours about an urgent bore near Red Bluff Road in Seabrook?
Yes, a person answers our phone at (405) 409-7423 24 hours a day for urgent work near Red Bluff Road or elsewhere in Seabrook. We provide 24 hour emergency response. The route, line size and nearby crossings still need to be assessed before work is planned.
How much Texas811 notice do I need for a Seabrook bore on Todville Road?
Request a Texas811 locate at least 48 hours before excavation on Todville Road, excluding Saturdays, Sundays and legal holidays; do not request it earlier than 14 days ahead. If work moves more than 14 days past the original notice, make a new request. Before work continues in Seabrook, we refresh worn or moved marks through Texas811.
What affects the cost of a Seabrook bore near Texas State Highway 146?
The route length and line size matter, along with Verland clay, exposed utilities, pavement, pits and creek crossings. Work under Texas State Highway 146 or near Union Pacific track can require added planning. Seabrook’s 489 road miles from Yukon also affect mobilization; high profile or emergency work can change the scope.
Where the Seabrook facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside Seabrook
- U.S. Census Bureau, TIGER/Line 2024: Seabrook boundary, roads, rail lines and streams
- U.S. Census Bureau, Vintage 2024 population estimates: Seabrook
- U.S. Census Bureau, American Community Survey 2019 to 2023: Seabrook housing units and year built
- Macrostrat geologic map compilation: map units under Seabrook
- U.S. EPA Safe Drinking Water Information System: public water systems serving Seabrook
- U.S. Department of Transportation, North American Rail Network: track owners in Harris County
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving Harris County
- U.S. Geological Survey, Elevation Point Query Service: Seabrook elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to Seabrook
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in Seabrook
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in Seabrook, Texas
Type the address of your job in Seabrook. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
County and State Pages for Seabrook
Same county: Houston · Pasadena · The Woodlands · Baytown · Atascocita · Spring · Channelview · Mission Bend · Deer Park · Cloverleaf · Cinco Ranch · Bellaire. All counties: Texas county list.
