trinityboringsolutions.com

Uvalde Estates Texas Directional Boring: Uvalde Clay Loam, Hatchery Slough, US 83

Quick Answer: Can we get a line beneath Hatchery Slough or US 83 without cutting the surface? Trinity Boring Solutions does directional boring, also called horizontal directional drilling (HDD), in Uvalde Estates for those crossings. Our Yukon, Oklahoma main office is 566 road miles away, and FM 481 helps define the local route. Uvalde clay loam and mapped heavy clay matter because sticky cuttings can load a reamer and grip the pipe. We plan around marked utilities and the exact crossing at Elm Drive or Hatchery Slough.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Uvalde Estates bores at a glance

  • Unincorporated community in Uvalde County, Texas. Population 1,879 (2020 Census count).
  • Road distance from our Yukon, Oklahoma main office: 566 miles, about 11.2 hours of driving.
  • Ground: Uvalde soil is mapped on 32 percent of the area, with clay loam about 40 inches down.
  • Rock: bedrock is mapped within 60 inches on 1 percent of the area.
  • Highways inside the boundary: US 83 and FM 481. State permit office: TxDOT San Antonio District.
  • Railroad track inside the boundary: none mapped.
  • Named streams inside the boundary: Hatchery Slough and Burkett Slough.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who can I call for directional boring under Hatchery Slough in Uvalde Estates?

Trinity Boring Solutions takes directional boring work in Uvalde Estates, an unincorporated community in Uvalde County with 1,879 people in the 2020 Census count. Can you get a line beneath Hatchery Slough or across US 83 without cutting it? Yes, we install water, sewer, gas, electric conduit and fiber along routes such as Elm Drive, after checking the path and access.

Our main office is in Yukon, Oklahoma, and Uvalde Estates work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our longest bore ran roughly 4,100 feet with 48 inch pipe under the Arkansas River in Tulsa. Beside that, a local service line under Homestead Road would be a much smaller job, planned to fit its route and line size.

Trinity Boring Solutions branded compact directional drilling unit positioned beside a tree on a red dirt jobsite
Our compact directional drill set up beside a tree on a tight site. Photos on this page are from our jobs in Oklahoma and Texas.

How does Uvalde soil affect drilling in Uvalde Estates?

The USDA soil survey maps Uvalde and Montell series at 32% each, with Olmos at 25%, Knippa at 7% and Valco at 4% of Uvalde Estates. Surface maps show clay across 38% and clay loam across 36%; very cobbly loam covers 25%. At about 40 inches, mapped texture is clay loam across 32%, clay across 32%, and cemented material across 25%. Average clay content there is 44%, and heavy clay conditions cover 71% of the mapped area. For Uvalde and Montell soils, we treat mapped patterns as planning context, not as test borings. That much clay can stick to a reamer and grip the pipe.

USDA soil survey, inside the Uvalde Estates mapped community boundaryWhat is mapped
Soil series mappedUvalde 32 percent, Montell 32 percent, Olmos 25 percent, Knippa 7 percent and Valco 4 percent
Texture at the surfaceclay 38 percent, clay loam 36 percent and very cobbly loam 25 percent
Texture about 40 inches downclay loam 32 percent, clay 32 percent and cemented material 25 percent
Engineering class about 40 inches downlean clay (CL) 39 percent, fat clay (CH) 32 percent and clayey sand (SC) 4 percent
Average clay content about 40 inches down44 percent
Bedrock mapped within 60 inches1 percent of the area (1 percent hard rock, 0 percent weathered rock)
Seasonal water table within 60 inches0 percent of the area
Flood prone soils1 percent of the area
High corrosion risk for uncoated steel72 percent of the area

The USDA soil survey maps bedrock within 60 inches across only 1% of Uvalde Estates, with typical depth listed as 38 inches; that pattern does not rule out rock elsewhere. Seasonal water table is not mapped within 60 inches, while flood prone soils cover 1%. High steel corrosion risk is mapped across 72%, so the line owner should consider casing and tracer wire materials. The mapped geology is Austin Chalk from the Late Cretaceous. Chalk can slow a bore compared with dirt, and the mapped corrosion risk makes material selection worth checking before work.

How do crews handle clay loam in Uvalde Estates?

Uvalde Estates has mapped clay loam and heavy clay, so we adjust fluid and reaming to keep sticky cuttings moving without pushing pressure into pavement near US 83.

  1. In the mapped heavy clay around Uvalde Estates, we use thinner drilling fluid with polymer and ream in stages to manage sticky cuttings.
  2. Where Uvalde clay holds the hole open, we watch fluid returns near pavement on US 83 so pressure does not lift the surface.
  3. Clay can swell around a pipe, so we plan to pull it the same day the hole is opened along routes such as Elm Drive.
  4. We hydrovac pothole every marked utility on the bore path before the drill approaches; marks near FM 481 show position, not depth.
Walkover locator held over a flowing creek while tracking the drill head on a 385 foot rock bore in Guthrie, Oklahoma
Tracking the drill head with a walkover locator over a flowing creek on a 385 foot bore in Guthrie, Oklahoma.

What does a bore have to cross near Elm Drive in Uvalde Estates?

US 83 runs 1.3 roadway miles inside the mapped Uvalde Estates boundary, and FM 481 accounts for 4.9 miles. US 90 is just outside the boundary, 0.5 miles away. Elm Drive is the longest named street at 4.67 miles, followed by Homestead Road at 4.07 miles and Old Eagle Pass Road at 3.29 miles. A bore on any of those routes needs a path that fits nearby pavement and marked lines. For a line under Elm Drive, we pothole marked utilities before drilling near them; paint shows position, not depth.

CrossingTypeMapped extentWho has a say
US 83US highway1.3 roadway miles insideState highway office
FM 481State highway4.9 roadway miles insideState highway office
US 90Highway nearby0.5 miles outsideState highway office
Hatchery SloughStream0.98 channel miles insideChecked for Corps of Engineers jurisdiction
Burkett SloughStream0.27 channel miles insideChecked for Corps of Engineers jurisdiction
Cooks SloughStream nearby0.6 miles outsideChecked for Corps of Engineers jurisdiction
Elm CreekStream nearby1 miles outsideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

No railroad is mapped inside Uvalde Estates or within 1 mile outside the boundary, so there is no nearby mapped track crossing to plan around. Hatchery Slough runs 0.98 channel miles inside the community, and Burkett Slough runs 0.27 miles. Two mapped street crossings intersect named streams. There are no lakes or ponds mapped within 1 mile. A planned bore at Hatchery Slough needs a check for U.S. Army Corps of Engineers jurisdiction during planning.

Who permits a bore on Uvalde County roads in Uvalde Estates?

Uvalde Estates is unincorporated, so its streets have no city government; the county or state has authority according to the road. For a bore in the US 83 or FM 481 right of way, electric and communication lines need 60 inches of cover at a highway crossing and 48 inches along the right of way. Water needs 60 inches at crossings and 36 inches along it; pressurized sewer needs 60 inches at crossings. The line owner files through TxDOT’s RULIS system, with the San Antonio District reviewing the application, and we prepare the bore plan and profile. Existing highway pavement is bored or tunneled beneath. A Hatchery Slough crossing is checked for federal jurisdiction during planning.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

What is already in the ground in Uvalde County near Uvalde Estates?

The water provider for a specific Uvalde Estates address must be confirmed with Uvalde County or the local water district before a bore is planned. EPA drinking water records do not connect systems to towns by name, so the right provider depends on the address. Utilities reporting electric service in Uvalde County include AEP Texas Central, Bandera Electric Cooperative, Medina Electric Cooperative and Rio Grande Electric Cooperative. We confirm the owner of the line before planning a conduit bore along FM 481 or another local route.

Line ownerWhat it isSourceSize
AEP Texas Central, Bandera Electric Cooperative, Medina Electric Cooperative and Rio Grande Electric CooperativeElectric utilities reporting service in Uvalde CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put the median Uvalde Estates housing year at 1990; 63% of units date from 1960 to 1999 and 37% from 2000 or later. That mix can mean either replacing a line along Homestead Road or bringing a new service to a newer home. We expose marked utilities with hydrovac before drilling near them, since locate marks do not show depth.

Reel of yellow polyethylene gas pipe on a trailer staged for a directional bore
A reel of yellow polyethylene gas pipe on a trailer, staged for a directional bore.

Do you cover La Pryor and Uvalde Estates?

Yes, Trinity Boring Solutions takes directional boring work in Uvalde Estates and across Texas. The community is in Uvalde County, covers 5.92 square miles and sits at an elevation of 972 feet. ZIP code 78801 serves the area. Uvalde, the county seat and nearest larger city, is 4.8 miles northeast; La Pryor is 15.2 miles south. The Yukon, Oklahoma main office is 566 road miles away, about an 11.2 hour drive, so distance is part of planning mobilization for a bore near FM 481.

Places near Uvalde Estates

What kinds of bores come up near Old Eagle Pass Road in Uvalde Estates?

  • Highway crossing: A line beneath US 83 needs a bore plan that respects the highway right of way and its pavement.
  • Street crossing: A service beneath Elm Drive can pass under the surface instead of cutting the street, after marked lines are exposed.
  • Creek crossing: A route beneath Hatchery Slough needs depth planning around the channel and a jurisdiction check during planning.
  • Water service: A connection near Homestead Road starts with confirming the provider for that specific address with the county or local water district.
  • Fiber conduit: A conduit route along FM 481 needs the line owner confirmed and marked utilities exposed before drilling near them.
  • Road crossing: A bore near Old Eagle Pass Road can be planned around its pavement, the mapped route and available pit access.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What do you need to quote a bore on Windmill Road in Uvalde Estates?

For a Windmill Road quote, send the address or map pin, what goes underground, pipe or conduit size, footage, and a sketch or plans if available. Those details let us compare the proposed route with local features such as FM 481, Hatchery Slough or nearby pavement. A sketch showing the start and finish points helps us understand where access and bore pits could fit.

A short route with clear access and few marked utilities would be simpler to plan than a long crossing near US 83 or Hatchery Slough. Length, pipe size, the Uvalde clay loam and any chalk or cemented material can change the drilling plan. So can utilities that must be exposed, pavement, creek crossings, pits, excavator time and sand backfill. High profile or emergency work adds planning demands, and the 566 road miles from Yukon affect mobilization for Uvalde Estates.

Questions people ask about boring in Uvalde Estates

Does Trinity Boring Solutions take directional boring jobs in Uvalde County near Uvalde Estates?

Yes. We take directional boring work in Uvalde Estates, Uvalde County, and keep one Trinity contact responsible from the first call through the bore log. Our own crews and partner crews working from vetted satellite yards can handle the field work, including a route under Elm Drive.

Can you bore a line beneath Hatchery Slough in Uvalde Estates?

A bore beneath Hatchery Slough can be planned, subject to the route, ground and access at the crossing. The slough runs 0.98 channel miles inside Uvalde Estates, so we plan depth beneath the channel and check for U.S. Army Corps of Engineers jurisdiction during planning.

Who owns electric lines in Uvalde County near Uvalde Estates, and who confirms conduit specs?

The specific line owner depends on the address; the countywide reporting list includes AEP Texas Central, Bandera Electric Cooperative, Medina Electric Cooperative and Rio Grande Electric Cooperative. We confirm the owner before planning an electric conduit bore near FM 481, and the owner can confirm the conduit requirements for its line.

Does Uvalde County control Old Eagle Pass Road in Uvalde Estates, and must it be cut?

Uvalde Estates has no city government, so the county or state is responsible for streets and permits depending on the road. A bore under Old Eagle Pass Road can keep the roadway surface uncut when the route and approvals allow; marked utilities still need to be exposed before drilling near them.

How old are homes and buried lines near Homestead Road in Uvalde Estates?

The American Community Survey 2019 to 2023 five year estimates put the median housing year at 1990, with 63% of units built from 1960 to 1999. That does not date any particular buried line near Homestead Road. For replacement or new service work, we expose marked utilities before the drill approaches them.

Does Uvalde soil in Uvalde Estates corrode steel, and what pipe should I use?

The USDA soil survey maps high steel corrosion risk across 72% of Uvalde Estates, so steel casing and tracer wire materials deserve review. In clay surface soils around Uvalde Estates, we use HDPE because it is not subject to that soil corrosion concern. The line owner chooses any coatings and confirms the pipe material for a bore through Uvalde clay loam.

Does Uvalde soil affect a Uvalde Estates bore 566 road miles from Yukon?

Yes, both the ground and distance can affect planning. Uvalde clay loam can make cuttings sticky and grip pipe, while the 566 road miles from the Yukon main office affect mobilization. We consider those details alongside the line size, bore length and route near FM 481.

How much Texas811 notice is needed for a bore on Elm Drive in Uvalde Estates?

For a bore along Elm Drive, Texas law requires a locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before it. For Uvalde County work, if the start slips more than 14 days past the original notice, we make a new request. Before continuing along Elm Drive, we refresh worn or moved marks through Texas811.

How do we assess directional bore costs under US 83 in Uvalde Estates?

The US 83 route, bore length, pipe or conduit size, Uvalde clay loam, and the number of marked utilities to expose all affect the job. Pavement, pits, excavator time, creek crossings and mobilization from Yukon can add work. We assess the actual route and scope rather than basing the quote on footage alone.

Where the Uvalde Estates facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Uvalde Estates

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Uvalde Estates, Texas

Type the address of your job in Uvalde Estates. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Uvalde Estates

Same county: Utopia. All counties: Texas county list.