Directional Boring Contractors in Jack County, TX

Trinity Boring Solutions is a directional boring contractor serving Jack County, Texas, installing water, sewer, gas, electric and fiber lines without an open trench in Jacksboro and Bryson. The Trinity main office in Yukon, Oklahoma is about 204 road miles from Jacksboro, the county seat. Most Jack County bores go under US 281 and US 380 and the West Fork Trinity River. Call (405) 409-7423 any time.

Free Bore Planner

Plan Your Bore in Jack County, Texas

Type the address of your job in Jack County. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

What Should You Know Before Boring in Jack County?

Jack County covers 911 square miles, has about 9,398 residents and sits in the TxDOT Fort Worth District.

County seatJacksboro
Population9,398 (2024 Census estimate), up 10.9% since 2020
Land area911 square miles
Largest cities and townsJacksboro (4,656) and Bryson (469)
TxDOT districtTxDOT Fort Worth District
811 centerTexas811 (call 811), two working days of notice
Electric utilitiesOncor Electric Delivery Company, Texas-New Mexico Power, Tri-County Electric Cooperative and Wise Electric Cooperative
Interstate and US highwaysUS 281 and US 380
State Highways59, 114, 148 and 199
State loops and spursLoop 187
RiversWest Fork Trinity River
Creeks and other streamsNorth Creek, Cameron Creek, Lost Creek, Big Cleveland Creek, West Fork Keechi Creek, Beans Creek, Big Creek and Little Cleveland Creek
LakesLake Bridgeport and Lake Jacksboro
RailroadsNo main line track
Average precipitation33.0 inches a year (1991 to 2020)
New housing units permitted2 in 2025
Road distance from Trinity main officeAbout 204 miles from Yukon, Oklahoma to Jacksboro
Trinity insuranceGeneral liability of $1,000,000 per occurrence and $4,000,000 aggregate, plus $5,000,000 excess liability

Sources: Census Bureau (2024 population, 2025 building permits, TIGER/Line roads and water), EIA Form 861 (2025), NOAA 1991 to 2020 precipitation, federal rail network map, TxDOT districts, OpenStreetMap routing. Checked November 2026.

What Does a Bore Have to Cross in Jack County?

A bore in Jack County most often has to cross a highway such as US 281, US 380 or State Highway 114 and a stream such as the West Fork Trinity River, North Creek or Cameron Creek. State Highways 59, 114, 148 and 199 also run through the county, along with Loop 187. The Census map names 25 larger streams in Jack County, led by the West Fork Trinity River, North Creek, Cameron Creek, Lost Creek, Big Cleveland Creek and West Fork Keechi Creek. The rest are Beans Creek, Big Creek, Little Cleveland Creek, Rock Creek, Carroll Creek, East Fork Keechi Creek, Jasper Creek, Howard Creek, West Salt Creek, Crooked Creek, Jones Creek, Lynn Creek, Snake Creek, Turkey Creek, Board Tree Creek, Cottonwood Creek, Two Bush Branch, Lodge Creek and Plum Creek. Lake Bridgeport and Lake Jacksboro are the main mapped lakes. There is no main line railroad in Jack County.

Trinity Boring Solutions horizontal directional drill rig set up on an open grass field with support trucks and a vacuum excavation truck
A Trinity Boring Solutions drill rig, support trucks and vacuum excavation truck on a jobsite.

What Is the Ground Like for Directional Boring in Jack County?

Rock is the main thing to plan for in Jack County: the federal soil survey records bedrock within five feet of the surface on about 62 percent of the county, a mix of hard and soft, weathered rock. Depth to rock in Jack County is confirmed by potholing before the rig is set, and rock tooling is loaded when the path cannot avoid it. May is the wettest month in Jack County at 4.3 inches on average and January the driest at 1.6. Jack County averages 33.0 inches of precipitation a year, so rain delays are occasional.

  • Most common soils: Shatruce (11%), Truce (10%) and Exray (8%).
  • Surface texture: most often fine sandy loam (26%) or loam (17%).
  • Bedrock within 5 feet: about 62% of the county. It is a mix of hard rock and softer weathered rock.
  • Clay rich layer (35% clay or more) in the top 5 feet: about 65% of the county.
  • Sandy layer (70% sand or more) in the top 5 feet: about 15% of the county.
  • Gravelly, cobbly or stony surface soil: about 28% of the county.

Source: USDA Natural Resources Conservation Service, Soil Survey Geographic Database, Jack County, Texas (survey area TX237, version 24, September 3, 2026), through Web Soil Survey. Percentages are shares of mapped county area.

Who Permits a Bore in Jack County?

The TxDOT Fort Worth District permits bores under state highways in Jack County, the Jack County Commissioners Court handles county roads, and Jacksboro and Bryson each handle their own streets.

  • State highways. US 281, US 380, the other numbered state routes and the farm to market roads in Jack County are on the state system. The utility owner files a TxDOT utility permit in RULIS.
  • Texas811 locates. Texas811 needs at least two working days of notice before digging (Texas811 FAQ; Texas Utilities Code, Section 251.151).
  • Water crossings. A bore under the West Fork Trinity River, North Creek or Lake Bridgeport is checked for U.S. Army Corps of Engineers jurisdiction while the path is planned.

Statewide rules are on the Directional Boring Texas page, and Trinity supplies the bore plan and profile for the permit package.

Which Electric Utilities Serve Jack County?

Oncor Electric Delivery Company, Texas-New Mexico Power, Tri-County Electric Cooperative and Wise Electric Cooperative serve Jack County, according to 2025 filings with the U.S. Energy Information Administration. Oncor Electric Delivery Company and Texas-New Mexico Power are investor owned utilities; Tri-County Electric Cooperative and Wise Electric Cooperative are member owned cooperatives. The owner of the line sets the conduit size, depth and inspection steps, so it is confirmed before a conduit bore in Jack County is planned. More on electric line boring for electric cooperatives.

How Much New Construction Is There in Jack County?

Jack County permitted 2 new housing units in 2025, all single family homes, according to the Census Bureau Building Permits Survey. The population of Jack County went from 8,473 in 2020 to 9,398 in 2024, a gain of 10.9 percent. In Jack County that means steady work on service lines, rural extensions and road crossings.

Which Cities and Towns in Jack County Does Trinity Serve?

Trinity takes directional boring work in all 2 incorporated places in Jack County and at sites outside city limits, and Jacksboro is the largest with about 4,656 residents.

City or town2024 population
Jacksboro4,656
Bryson469

Source: U.S. Census Bureau 2024 estimates, counting only the part of each city inside Jack County.

Jack County borders Archer County, Clay County, Montague County, Palo Pinto County, Parker County, Wise County and Young County; every county is on the Directional Boring in All 254 Texas Counties page. The neighboring county seats are Archer City (Archer), Henrietta (Clay), Montague (Montague), Palo Pinto (Palo Pinto), Weatherford (Parker), Decatur (Wise) and Graham (Young).

Which Directional Boring Services Are Available in Jack County?

Every Trinity service is available in Jack County: horizontal directional drilling from 3/4 inch service lines to 48 inch casing, auger boring, hydrovac potholing, trenching and 24 hour emergency response, all listed under Underground Utility and Boring Services.

The free Bore Planner sizes a Jack County job before you call.

Jack County Directional Boring FAQs: What Do Customers Ask?

Does Trinity Boring Solutions work in Jacksboro, Texas?

Yes. Trinity Boring Solutions takes work in Jacksboro and Bryson and the rural parts of Jack County. Trinity works in Texas with its own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted.

Who approves a bore under US 281 in Jack County?

The TxDOT Fort Worth District. The utility owner files the permit in the TxDOT RULIS system. County roads go through the Jack County Commissioners Court and city streets through the city.

Is there rock in Jack County?

Yes, in places. The federal soil survey records bedrock within five feet of the surface on about 62 percent of Jack County, a mix of hard and soft, weathered rock. Potholing confirms it on the actual bore path.

Can a line be bored under the West Fork Trinity River in Jack County?

Yes. A drill is steered below the bed of the West Fork Trinity River from a pit on each bank and the pipe is pulled back through, so the channel is not opened. Federal jurisdiction over the crossing is checked first.

Is Trinity insured for work in Jack County?

Yes. Trinity Boring Solutions carries general liability of $1,000,000 per occurrence and $4,000,000 aggregate, plus $5,000,000 excess liability. Ask for a certificate with the quote.

How much does directional boring cost in Jack County?

We start from a general range based on length and pipe size. Depth, the crossings and the ground set the number, and rock is a factor on many Jack County jobs.

How Do You Get a Bore Quote in Jack County?

Call (405) 409-7423 any time or send the address in Jack County, the utility, the length and what it crosses. Trinity has bored since 1965 and is family owned.