trinityboringsolutions.com

McLeod Texas Directional Boring: Tenaha Loamy Fine Sand, FM 125 and Hunts Creek

Quick Answer: McLeod is an unincorporated community, so its streets fall to the county or state, and we do directional boring, also called horizontal directional drilling (HDD), for lines crossing FM 125. The Yukon main office is 347 road miles away, a factor for work near Lewis Street. Tenaha loamy fine sand covers part of McLeod, while sandy clay loam is common about 40 inches down and can grip a reamer. Hunts Creek touches the mapped community boundary, so a nearby route needs crossing review.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

McLeod bores at a glance

  • Unincorporated community in Cass County, Texas. Population 311 (2020 Census count).
  • Road distance from our Yukon, Oklahoma main office: 347 miles, about 7.2 hours of driving.
  • Ground: Tenaha soil is mapped on 23 percent of the area, with sandy clay loam about 40 inches down.
  • Rock: bedrock is mapped within 60 inches on 2 percent of the area.
  • Highways inside the boundary: FM 125 and FM 251. State permit office: TxDOT Atlanta District.
  • Railroad track inside the boundary: none mapped.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Does anyone do directional boring near McLeod and FM 125?

McLeod is an unincorporated community in Cass County, so there is no city government to own its streets. The Census Bureau counted 311 residents in 2020; it does not publish yearly estimates for unincorporated places. We install water, sewer, gas, electric conduit and fiber lines, including service routes that connect properties along FM 125 or Lewis Street.

Our main office is in Yukon, Oklahoma, and McLeod work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. We began directional boring in 1982. Four decades of work matters in McLeod, where mapped sandy surface soils overlie sandy clay loam and require the bore plan to account for changing ground.

Ditch Witch JT922 compact directional drill beside the Trinity Boring Solutions truck at NE 24th Street in Oklahoma City
Our Ditch Witch JT922 compact directional drill beside the Trinity truck on a sleeve bore at NE 24th Street in Oklahoma City. Photos on this page are from our jobs in Oklahoma and Texas.

What does the USDA soil survey show for McLeod and Tenaha soil?

The USDA soil survey maps Tenaha soil across 23 percent of McLeod, with Tenaha loamy fine sand on 21 percent of the mapped area. Lilbert, Briley and Sailes soils also appear in the community. Surface texture is mostly loamy fine sand, mapped on 72 percent, with fine sandy loam on 27 percent. At about 40 inches below the surface, sandy clay loam is mapped under 85 percent of the area, and average clay content there is 25 percent. These are mapped patterns, not test borings, so a specific route still needs site review.

USDA soil survey, inside the McLeod mapped community boundaryWhat is mapped
Soil series mappedTenaha 23 percent, Lilbert 20 percent, Briley 19 percent, Sailes 18 percent and Darco 9 percent
Texture at the surfaceloamy fine sand 72 percent and fine sandy loam 27 percent
Texture about 40 inches downsandy clay loam 85 percent, loamy fine sand 9 percent and fine sandy loam 3 percent
Engineering class about 40 inches downclayey sand (SC) 61 percent, lean clay (CL) 24 percent and silty clayey sand (SC SM) 12 percent
Average clay content about 40 inches down25 percent
Bedrock mapped within 60 inches2 percent of the area (0 percent hard rock, 2 percent weathered rock)
Seasonal water table within 60 inches8 percent of the area
Flood prone soils3 percent of the area
High corrosion risk for uncoated steel9 percent of the area

Bedrock is mapped within 60 inches in 2 percent of McLeod, so the survey does not map it in the top five feet across most of the community. The geologic map shows Queen City Sand, a Lutetian unit of sand, siltstone and claystone; softer or weathered beds can slow a bore. A seasonal water table is mapped within 60 inches in 8 percent of the area, and flood prone soils in 3 percent, which matters near Hunts Creek. High steel corrosion risk is mapped in 9 percent, so the line owner should consider casing and tracer wire protection.

How do crews handle McLeod’s sandy clay loam?

At McLeod, loamy fine sand near the surface and sandy clay loam below call for a plan that changes with the material. We use the route, utility marks and ground conditions to set the bore sequence.

  1. Where Tenaha loamy fine sand is near the surface, we use staged reaming and keep the pipe ready so loose sand has less time to fall into the hole.
  2. Sandy clay loam is mapped under 85 percent of McLeod at about 40 inches, so we watch for clay that can cling to the reamer and adjust the fluid plan.
  3. Near mapped seasonal water table areas, including routes toward Hunts Creek, we keep pits small and manage water so wet soil does not flow into the work area.
  4. Before a bore near Lewis Street, we hydrovac marked utilities and track the drill head from the surface, recording depth and pitch as the route advances.
Trinity Boring Solutions water trailer supplying water for bentonite drilling fluid on a sleeve bore in northeast OKC
Our water trailer feeding the bentonite drilling fluid mix on a sleeve bore in northeast Oklahoma City.

Where might a line go under Hunts Creek near McLeod?

FM 125 runs 2.4 mapped roadway miles inside McLeod, and FM 251 runs 0.8 miles. Those state routes can require a permitted bore rather than an open cut through pavement. Farm Road 251-S is the longest named street at 0.83 miles; Lewis Street measures 0.34 miles and Wall Street 0.31 miles. A bore along one of these streets can keep pavement and driveways uncut, with entry and exit pits placed in dirt where access allows.

CrossingTypeMapped extentWho has a say
FM 125State highway2.4 roadway miles insideState highway office
FM 251State highway0.8 roadway miles insideState highway office
Hunts CreekStream nearbyAlong the boundaryChecked for Corps of Engineers jurisdiction
Clear CreekStream nearby0.5 miles outsideChecked for Corps of Engineers jurisdiction
Mill CreekStream nearby0.7 miles outsideChecked for Corps of Engineers jurisdiction
Morses Mill PondLake or pond39 acres, nearbyChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

No railroad is mapped inside McLeod or within one mile beyond its boundary, so there is no mapped track crossing to plan around. No named stream runs inside the community, and no street crossing of a named stream is mapped there. Hunts Creek touches the boundary, while Clear Creek is 0.5 miles away and Mill Creek 0.7 miles. Morses Mill Pond, a 39 acre pond, is outside the boundary but within one mile; a proposed water crossing needs site specific review.

Who approves a bore on McLeod roads in Cass County?

McLeod has no city government, so street authority rests with Cass County or the state, depending on the road. FM 125 and FM 251 are state highways. Work in their right of way needs a TxDOT utility permit, reviewed by the TxDOT Atlanta District. The utility owner files through TxDOT’s online RULIS system; we prepare the bore plan and profile and work under the owner’s permit. TxDOT rules set cover depths by line type, with a different depth possible in the permit. A line beneath existing highway pavement must be bored or tunneled. Hunts Creek is checked for U.S. Army Corps of Engineers jurisdiction during crossing planning.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Which utilities serve McLeod in Cass County?

The water provider for a specific McLeod address has to be confirmed with the city, the county or the local water district before a bore is planned. EPA drinking water records do not tie systems to towns, and no system is matched by this community’s name. Southwestern Electric Power, Bowie-Cass Electric Cooperative, Southwest Arkansas Electric Cooperative and Upshur Rural Electric Cooperative report electric service in Cass County. The line owner must be identified before conduit size and route are set for a property near FM 125.

Line ownerWhat it isSourceSize
Southwestern Electric Power, Bowie-Cass Electric Cooperative, Southwest Arkansas Electric Cooperative and Upshur Rural Electric CooperativeElectric utilities reporting service in Cass CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put McLeod’s median housing year at 1990. Of its housing units, 21 percent were built before 1960, 64 percent from 1960 to 1999 and 15 percent in 2000 or later. A replacement bore along Lewis Street may encounter older buried services, while newer homes may call for a service connection. We hydrovac pothole marked utilities on the route before drilling near them; paint shows position, not depth.

Coiled black HDPE conduit fitted with a pulling grip staged on a lawn along a completed bore path
Coiled HDPE conduit fitted with a pulling grip, staged on a lawn along a finished bore path.

Where is McLeod in relation to Atlanta?

McLeod is an unincorporated community in Cass County, Texas, at an elevation of 307 feet and with 2.74 square miles of mapped land. Its ZIP codes are 75555 and 75565. Bivins is 8.3 miles northwest, Atlanta is 12.7 miles northwest, and Bloomburg is 13.3 miles north. Atlanta is the nearest larger city; Linden, the county seat, is 17.1 miles west. From Trinity’s Yukon, Oklahoma main office, McLeod is 347 road miles away, or a 7.2 hour drive, which affects mobilization for work near FM 125.

Places near McLeod

What boring work comes up near McLeod and Lewis Street?

  • Highway crossing: A proposed line beneath FM 125 needs a bore plan that accounts for TxDOT right of way and the route’s pavement.
  • Water service: A service near Lewis Street starts with confirming the address provider and locating existing lines before the drill approaches them.
  • Electric conduit: A conduit route near FM 251 needs its electric line owner identified before conduit specifications and the bore path are finalized.
  • Creek crossing: A proposed route near Hunts Creek needs channel and jurisdiction review, with the bore planned to pass below the channel.
  • Street connection: A replacement line along Wall Street can use entry and exit pits in dirt to avoid cutting the street surface.
  • Property service: A longer connection near Farm Road 251-S needs a route sketch to show access, crossings and the amount of footage.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What drives the price of a McLeod bore near Farm Road 251-S?

For a McLeod quote, send the address or map pin, what is going in the ground, the pipe or conduit size and footage; a sketch or plans help. A route near Farm Road 251-S also helps us see if the work approaches FM 251, a driveway or a low area. That route detail can change the equipment and crossing plan.

In McLeod, soil and crossing conditions can lead the estimate because sandy clay loam below Tenaha loamy fine sand affects reaming and fluid needs. Length and pipe or conduit size also set the scale of the work. We account for utilities to expose, pavement, entry pits, excavator time and backfill. A crossing near FM 125 or Hunts Creek adds planning needs, and 347 road miles from Yukon affects mobilization.

Questions people ask about boring in McLeod

Does Trinity Boring Solutions take jobs in McLeod and Cass County, and who staffs them?

Yes. We take directional boring work in McLeod, and the job is handled by our own crews or crews from partner drilling contractors we have vetted. The main office remains in Yukon, Oklahoma, while Trinity stays your point of contact from the first call through the bore log, including work near FM 125.

Which electric company owns the lines in McLeod and Cass County, and who confirms conduit specs?

The owner depends on the specific McLeod address. Southwestern Electric Power, Bowie-Cass Electric Cooperative, Southwest Arkansas Electric Cooperative and Upshur Rural Electric Cooperative report service in Cass County. The utility that owns the line needs to be confirmed before a conduit bore, including one proposed near Lewis Street, and its requirements guide conduit specifications.

Who controls Wall Street in McLeod, and does a bore need to cut it?

McLeod has no city government, so Wall Street authority belongs to the county or state, depending on the road. Directional boring can pass below a street without opening a trench through its surface. The route still needs utility locating and suitable pits on either side of the proposed crossing.

How old are the buried lines near Lewis Street in McLeod?

The American Community Survey 2019 to 2023 estimates place McLeod’s median housing year at 1990, with 21 percent of homes built before 1960. That does not establish the age of any buried line. For a replacement bore near Lewis Street, we expose marked utilities by hydrovac before drilling close to them.

What ground will a bore cross in McLeod near Tenaha soil?

The USDA soil survey maps Tenaha soil across 23 percent of McLeod, and sandy clay loam under about 40 inches across 85 percent. Loamy fine sand is the most common surface texture. Loose surface soil can cave behind a bit, while clay below can cling to the reamer, so the bore plan accounts for both.

Will a bore in McLeod hit rock?

The USDA soil survey maps bedrock within 60 inches in 2 percent of McLeod, so bedrock is not mapped in the top five feet across most of the area. That does not rule out rock at greater depth. The geologic map names Queen City Sand, a Lutetian unit that includes sandstone, siltstone and claystone.

How far is McLeod from the Yukon office, and does Atlanta change the job?

McLeod is 347 road miles and a 7.2 hour drive from Trinity’s Yukon, Oklahoma main office. Atlanta is 12.7 miles northwest and is the nearest larger city. The distance can affect mobilization for a bore near FM 125, while the proposed route and ground still determine the work plan.

How much 811 notice does a bore near Farm Road 251-S in McLeod need?

For a bore near Farm Road 251-S, submit a Texas811 locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before. The ticket has a 20 day life. If the start slips more than 14 days past the original notice, make a new request; worn or moved marks must be refreshed through Texas811 before work continues.

What affects the cost of a directional bore near FM 125 in McLeod?

The job scope sets the price, not the place name alone. For McLeod, soil conditions around Tenaha loamy fine sand and sandy clay loam can affect drilling time. Length, line size, utilities to expose, pavement, pits and backfill also matter. A crossing at FM 125 or Hunts Creek and mobilization from Yukon can change the work required.

Where the McLeod facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in McLeod

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in McLeod, Texas

Type the address of your job in McLeod. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for McLeod

Same county: Hughes Springs · Avinger · Douglassville · Marietta · Domino. All counties: Texas county list.