Marietta Texas Directional Boring: Bowie Fine Sandy Loam, FM 250 and Floyd Creek
Quick Answer: Can we put your line beneath FM 250 without cutting the pavement? Trinity Boring Solutions takes directional boring, also called horizontal directional drilling (HDD), work in Marietta, where FM 250 is a state highway. Marietta is 312 road miles from our Yukon, Oklahoma main office, and a job near Main Street needs mobilization planned alongside the route. Bowie fine sandy loam covers 73% of mapped area; deeper sandy clay loam can hold the bore, so reaming and fluid need care.
Marietta bores at a glance
- Incorporated city in Cass County, Texas. Population 115 (Census Bureau 2024 estimate).
- Road distance from our Yukon, Oklahoma main office: 312 miles, about 6.3 hours of driving.
- Ground: Bowie soil is mapped on 73 percent of the area, with sandy clay loam about 40 inches down.
- Rock: bedrock is mapped within 60 inches on 1 percent of the area.
- Highways inside the boundary: FM 250 and FM 1399. State permit office: TxDOT Atlanta District.
- Railroad track inside the boundary: none mapped.
- Public water: City of Marietta, groundwater wells.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Who handles directional boring in Marietta, Cass County?
Can you get a line beneath Farm Road 250 without cutting the pavement? We take directional boring jobs in Marietta, an incorporated town in Cass County with a population of 115, according to the Census Bureau Vintage 2024 estimate. We install water, sewer, gas, electric conduit and fiber lines beneath streets such as Central Avenue or Stevens Drive, with the route and existing lines checked for each job.
Our main office is in Yukon, Oklahoma, and Marietta work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our longest bore reached roughly 4,100 feet with 48 inch pipe beneath the Arkansas River in Tulsa, Oklahoma. A job near FM 250 is planned for its own route and line size. Our family business began in 1965 and has done directional boring since 1982.

What is Marietta ground like in Bowie soil?
The USDA soil survey maps Bowie soil across 73% of Marietta, chiefly as Bowie fine sandy loam on 1 to 5 percent slopes. Fine sandy loam makes up 75% of the mapped surface texture, while loamy fine sand accounts for 24%. At about 40 inches below the surface, 97% of the mapped soil is sandy clay loam, with an average clay content of 28%. That deeper layer can behave more like clay than surface sand, so a bore needs staged reaming and fluid suited to the ground.
| USDA soil survey, inside the Marietta city limits | What is mapped |
|---|---|
| Soil series mapped | Bowie 73 percent, Tenaha 15 percent and Lilbert 9 percent |
| Texture at the surface | fine sandy loam 75 percent and loamy fine sand 24 percent |
| Texture about 40 inches down | sandy clay loam 97 percent |
| Engineering class about 40 inches down | lean clay (CL) 86 percent and clayey sand (SC) 12 percent |
| Average clay content about 40 inches down | 28 percent |
| Bedrock mapped within 60 inches | 1 percent of the area (0 percent hard rock, 1 percent weathered rock) |
| Seasonal water table within 60 inches | 75 percent of the area |
| Flood prone soils | 2 percent of the area |
| High corrosion risk for uncoated steel | 75 percent of the area |
The USDA soil survey maps bedrock within 60 inches across 1% of Marietta, with typical bedrock depth at 37 inches, so a route may meet shallow rock in some spots. A seasonal water table is mapped within 60 inches across 75%, which can mean wet pits. Flood prone soils cover 2%. High steel corrosion risk is mapped across 75%, a concern for uncoated steel casing or tracer wire; the line owner selects coatings, while HDPE avoids that steel concern. The Queen City Sand geologic unit, of Lutetian age, includes sand, siltstone and claystone, so the profile can change along a bore.
How do we bore Marietta’s sandy clay loam?
Bowie fine sandy loam at the surface and sandy clay loam deeper down call for a bore plan that follows the ground, not a fixed recipe. Near FM 250, we track the drill head from the surface and log its depth and pitch.
- Surface setup: Bowie fine sandy loam covers much of Marietta, so we place pits in dirt on each side and leave streets such as Main Street uncut.
- Utility checks: Before a bore near Central Avenue, we hydrovac each marked utility on the path; paint shows its position, not how deep it lies.
- Drilling: Where the deeper sandy clay loam holds the hole or grips the pipe, we adjust fluid, ream in stages and prepare the pipe for the pull.
- Tracking and pits: With seasonal water mapped within 60 inches across 75% of the area, we plan manageable pits and track depth and pitch along the route.

Which roads, tracks or creeks can a Marietta bore cross near Farm Road 250?
FM 250 and FM 1399 are state highways within Marietta, with mapped roadway lengths of 1.0 mile and 0.5 mile in town. Farm Road 250 is also the longest named street, at 0.97 mile. Central Avenue runs 0.81 mile, Stevens Drive 0.49 mile and Main Street 0.48 mile. A bore beneath one of these routes can leave the pavement uncut, but the exact path and road ownership matter. No other highways are listed within 1.5 miles outside the town limits.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| FM 250 | State highway | 1 roadway miles inside | State highway office |
| FM 1399 | State highway | 0.5 roadway miles inside | State highway office |
| Floyd Creek | Stream nearby | Along the boundary | Checked for Corps of Engineers jurisdiction |
| Bear Creek | Stream nearby | 0.1 miles outside | Checked for Corps of Engineers jurisdiction |
| Sweet Creek | Stream nearby | 0.6 miles outside | Checked for Corps of Engineers jurisdiction |
No railroad or mapped street and rail crossing is listed inside Marietta, so a rail route is not part of the local crossing picture. No named stream crossing of a street is mapped in town either. Floyd Creek runs along or touches the boundary, Bear Creek is 0.1 mile from it and Sweet Creek is 0.6 mile away. A proposed bore near Floyd Creek still needs a channel plan; no lakes or ponds are mapped within one mile.
Who permits a Marietta bore near FM 250?
For work in the FM 250 or FM 1399 right of way, the line owner files the utility permit through TxDOT’s online RULIS system; the TxDOT Atlanta District reviews it. We give the owner the bore plan and profile and work under the permit issued for that line. TxDOT rules call for at least 60 inches of cover below the lowest crossed grade for electric and communication lines, and 60 inches for water crossings; the permit can set another depth. Marietta’s city streets belong to the city. A proposed Floyd Creek crossing is checked for U.S. Army Corps of Engineers jurisdiction during planning.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
Who owns buried lines in Marietta near the City of Marietta system?
The City of Marietta public water system uses groundwater wells and serves 115 people through 107 service connections. For electric service, Southwestern Electric Power, Bowie-Cass Electric Cooperative, Southwest Arkansas Electric Cooperative and Upshur Rural Electric Cooperative report service in Cass County. Those county reports do not identify the provider at every address, so the line owner is confirmed before planning an electric conduit bore near FM 250.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| City of Marietta | Public water system | Groundwater wells | 107 connections, 115 people served |
| Southwestern Electric Power, Bowie-Cass Electric Cooperative, Southwest Arkansas Electric Cooperative and Upshur Rural Electric Cooperative | Electric utilities reporting service in Cass County | EIA Form 861 | Confirm the line owner by address |
American Community Survey 2019 to 2023 five year estimates put Marietta’s median housing year at 1994; 24% of homes were built before 1960, 33% from 1960 to 1999 and 43% in 2000 or later. A replacement bore along Central Avenue may meet older buried lines, while newer homes can call for service extensions. We hydrovac pothole marked utilities on the planned path before the drill approaches, because locate paint does not show depth.

What is near Marietta, including Douglassville?
Marietta is in Cass County, Texas, at an elevation of 351 feet and covers 0.58 square mile. The town’s ZIP code is 75566. Naples lies 8.1 miles west, Douglassville 11.1 miles east, Omaha 11.4 miles west, Hughes Springs 13.1 miles southwest and Daingerfield 14.5 miles southwest. Linden, the county seat, is 15.3 miles southeast; Atlanta is 22.1 miles east. The Yukon, Oklahoma main office is 312 road miles away, a 6.3 hour drive, so that distance is part of planning work around FM 250.
Places near Marietta
- Directional boring in Naples: 8.1 miles west
- Directional boring in Douglassville: 11.1 miles east
- Directional boring in Omaha: 11.4 miles west
- Directional boring in Hughes Springs: 13.1 miles southwest
- Directional boring in Daingerfield: 14.5 miles southwest
- Directional boring in Atlanta: 22.1 miles east
Which Marietta jobs call for a bore near Floyd Creek?
- Highway crossing: A bore beneath FM 250 keeps the route under the roadway, with the line owner’s TxDOT permit guiding the right of way work.
- Street service: A water or sewer line beneath Stevens Drive can avoid an open cut across the paved route.
- Fiber conduit: A fiber route along Central Avenue needs marked utilities exposed before the drill approaches their recorded positions.
- Creek crossing: Near Floyd Creek, a proposed bore needs a channel route and a check for U.S. Army Corps of Engineers jurisdiction.
- Water service: A connection near the City of Marietta system needs the line route and existing groundwater service lines checked.
- Electric conduit: Near FM 1399, the electric line owner is confirmed before the conduit route and any state right of way permit are planned.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
What do you need to quote a Marietta bore near Main Street?
For a quote near Main Street, send the address or map pin, what is going in the ground, the pipe or conduit size and the footage; a sketch or plans help. That lets us compare the route with nearby streets such as Central Avenue and identify the crossings to check before setting the bore scope.
The job scope sets the price, not footage alone. Marietta is 312 road miles from Yukon, so mobilization matters alongside the work itself. Bowie soil and the sandy clay loam mapped below it affect drilling time; a crossing at FM 250 can bring state right of way requirements. The number of utilities to expose, pavement or concrete, creek crossings near Floyd Creek, pits, excavator time, sand backfill and emergency timing can also change the plan.
Questions people ask about boring in Marietta
Does Trinity Boring Solutions take directional boring work in Marietta, Cass County?
Yes. We take directional boring work in Marietta, Cass County, and staff it with our own crews or crews at satellite yards operated by partner drilling contractors we have vetted. You work with Trinity from the first call through the bore log, including on a route beneath Farm Road 250.
Who controls Stevens Drive in Marietta, and does a bore require cutting it?
Stevens Drive is a city street because Marietta is incorporated. A directional bore can pass beneath it without opening the pavement, subject to the route, line and utility checks. The city street is distinct from nearby FM 250, where work in the state right of way needs a TxDOT utility permit.
How do Marietta homes along Central Avenue affect replacement bores?
Marietta’s median housing year is 1994, according to American Community Survey 2019 to 2023 five year estimates, and 24% of homes predate 1960. Those figures do not date buried lines, but an older service being replaced along Central Avenue may have other utilities nearby. We expose marked lines before drilling close to them.
Can wet or flood prone ground near Floyd Creek affect Marietta bore pits?
It can. The USDA soil survey maps a seasonal water table within 60 inches across 75% of Marietta and flood prone soils across 2%. Near Floyd Creek, we plan pit locations and the route with wet ground and the channel in mind; a creek crossing is checked for federal jurisdiction during planning.
Does Bowie soil in Marietta corrode steel, and what pipe can a bore use?
High steel corrosion risk is mapped across 75% of Marietta, including areas mapped as Bowie soil. That makes uncoated steel casing or tracer wire a planning concern. The line owner chooses any coating; HDPE does not have the same steel corrosion concern. The material choice depends on the line and its job requirements.
What ground does a Marietta bore pass through in Bowie soil?
The USDA soil survey maps Bowie fine sandy loam across 73% of Marietta. At about 40 inches, sandy clay loam makes up 97% of mapped soil, with an average clay content of 28%. A bore can meet a more claylike layer below the sandy surface, which calls for staged reaming and fluid suited to the ground.
Can I reach Trinity after hours about an urgent bore on Stevens Drive in Marietta?
Yes. A person answers Trinity’s phone at (405) 409-7423 24 hours a day, including for an urgent job near Stevens Drive. We also provide 24 hour emergency response. The route, what line needs to go in and any nearby utilities still shape the work plan.
How early should I request locates for a Marietta bore near Farm Road 250?
For a bore near Farm Road 250, submit a request to Texas811 at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays; Texas811 describes that as two working days. Do not request it earlier than 14 days before work. If the start slips more than 14 days past the original notice, make a new request; refresh marks through Texas811 if they wear off or move.
What affects the cost of directional boring in Marietta near FM 250?
The route length, pipe size, Bowie soil conditions and number of utilities to expose all affect a bore near FM 250. Pavement, pits, excavator time, sand backfill and any creek crossing near Floyd Creek also matter. Mobilization from the Yukon office is part of the scope because Marietta is 312 road miles away.
Where the Marietta facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside Marietta
- U.S. Census Bureau, TIGER/Line 2024: Marietta boundary, roads, rail lines and streams
- U.S. Census Bureau, Vintage 2024 population estimates: Marietta
- U.S. Census Bureau, American Community Survey 2019 to 2023: Marietta housing units and year built
- Macrostrat geologic map compilation: map units under Marietta
- U.S. EPA Safe Drinking Water Information System: public water systems serving Marietta
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving Cass County
- U.S. Geological Survey, Elevation Point Query Service: Marietta elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to Marietta
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in Marietta
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in Marietta, Texas
Type the address of your job in Marietta. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
County and State Pages for Marietta
Same county: Linden · Queen City · Avinger · Bloomburg · Domino · Bivins · McLeod. All counties: Texas county list.
