Fort Hood Texas Directional Boring: Topsey Clay Loam, BNSF Railway, Clear Creek
Quick Answer: For bores near BNSF Railway, Trinity Boring Solutions takes directional boring, also called horizontal directional drilling (HDD), work in Fort Hood, Texas. At 364 road miles from Yukon, we staff Fort Hood jobs with our own crews and vetted partner contractors; Clear Creek is one local crossing to assess. Topsey soil is the leading mapped series, and clay can cling to the reamer. We adjust fluid and ream in stages so the hole stays workable.
Fort Hood bores at a glance
- Unincorporated community in Coryell County and Bell County, Texas. Population 28,295 (2020 Census count).
- Road distance from our Yukon, Oklahoma main office: 364 miles, about 7 hours of driving.
- Ground: Topsey soil is mapped on 30 percent of the area, with silty clay loam about 40 inches down.
- Rock: bedrock is mapped within 60 inches on 49 percent of the area.
- Highways inside the boundary: Interstate 14, US 190, US 190 Business and Texas State Highway 201. State permit office: TxDOT Waco District.
- Railroad track inside the boundary: BNSF Railway, with 11 mapped street and rail crossings.
- Named streams inside the boundary: Clear Creek, South Nolan Creek, Long Branch and Nolan Creek Branch J.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Which contractor handles Fort Hood bores near BNSF Railway?
Fort Hood is 364 road miles from our Yukon yard, so our own crews and vetted partner contractor crews cover work across Coryell County and Bell County. The Census Bureau counted 28,295 people here in 2020; it does not publish yearly estimates for this unincorporated place. We can install water, sewer, gas, electric conduit or fiber along Tank Destroyer Boulevard and other streets, subject to the marked utilities and crossing plan.
Our main office is in Yukon, Oklahoma, and Fort Hood work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our range runs from a 3/4 inch service line near Battalion Avenue to 48 inch casing for a larger crossing such as BNSF Railway. We are a family business that began in 1965, and we have done directional boring since 1982.

What kind of ground does Fort Hood have around Topsey soil?
The USDA soil survey maps Topsey as the largest soil series in Fort Hood, covering 30% of the mapped area. Topsey clay loam is the leading map unit, while Slidell silty clay and Denton silty clay also occur. At about 40 inches below the surface, the survey maps 31% silty clay loam and 23% silty clay; the average clay content is 38%. Heavy clay covers 68% of the area at that depth, so sticky cuttings and reamer buildup deserve attention. These are mapped soil patterns, not test borings.
| USDA soil survey, inside the Fort Hood mapped community boundary | What is mapped |
|---|---|
| Soil series mapped | Topsey 30 percent, Slidell 15 percent, Denton 14 percent, Nuff 13 percent and Cho 11 percent |
| Texture at the surface | clay loam 47 percent, silty clay 38 percent and very stony silty clay loam 13 percent |
| Texture about 40 inches down | silty clay loam 31 percent, silty clay 23 percent and silt loam 14 percent |
| Engineering class about 40 inches down | lean clay (CL) 45 percent, fat clay (CH) 24 percent and elastic silt (MH) 13 percent |
| Average clay content about 40 inches down | 38 percent |
| Bedrock mapped within 60 inches | 49 percent of the area (15 percent hard rock, 35 percent weathered rock) |
| Seasonal water table within 60 inches | 0 percent of the area |
| Flood prone soils | 3 percent of the area |
| High corrosion risk for uncoated steel | 38 percent of the area |
The USDA soil survey maps bedrock within 60 inches across 49% of Fort Hood, including hard bedrock in 15% and weathered bedrock in 35%; bedrock is within 40 inches across 36%. A hard or weathered contact can slow the bore and push the head off line. No seasonal water table is mapped within 60 inches, while flood prone soils cover 3%. High steel corrosion risk is mapped in 38%; the geologic map includes Stony calcareous clay solution residuum of Cenozoic age and Walnut clay of Albian age. The line owner selects casing and tracer wire coatings.
How do we bore Fort Hood’s silty clay loam?
Fort Hood soil maps show clay and silty clay loam, which can cling to a reamer and grip pipe. We match fluid and reaming steps to the ground along each route, whether it follows a street or approaches Clear Creek.
- Topsey clay loam can stick to the reamer, so we use a thinner fluid mix with polymer and enlarge the bore in stages before pulling pipe.
- Along Tank Destroyer Boulevard, we hydrovac pothole marked utilities before drilling near them; surface paint shows where a line runs, not its depth.
- Where the route meets the mapped bedrock around Fort Hood, we adjust the tooling and advance carefully through the soil to rock contact.
- For a Clear Creek crossing, we plan the bore beneath the channel and keep entry and exit pits on the banks rather than cutting across them.

What does a bore have to cross in Fort Hood near Clear Creek?
Interstate 14, US 190 and US 190 Business run inside the mapped Fort Hood community boundary, along with Texas State Highway 201. Texas State Highway 195 touches the boundary, and Texas State Highway 9 is 0.8 miles outside it. Tank Destroyer Boulevard is the longest named street at 7.59 miles inside the community; Battalion Avenue and Range Road are also long routes. A bore plan needs to account for pavement, driveway access and the utilities along the selected path.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| Interstate 14 | Interstate | 6.8 roadway miles inside | State highway office |
| US 190 | US highway | 8.3 roadway miles inside | State highway office |
| US 190 Business | US highway | 4.3 roadway miles inside | State highway office |
| Texas State Highway 201 | State highway | 0.4 roadway miles inside | State highway office |
| Texas State Highway 195 | Highway nearby | Runs along or touches the city limits | State highway office |
| Texas State Highway 9 | Highway nearby | 0.8 miles outside | State highway office |
| BNSF Railway | Railroad | 13.75 track miles inside | The railroad |
| Clear Creek | Stream | 3.49 channel miles inside | Checked for Corps of Engineers jurisdiction |
| South Nolan Creek | Stream | 2.63 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Long Branch | Stream | 0.39 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Nolan Creek Branch J | Stream | 0.07 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Nolan Creek | Stream nearby | Along the boundary | Checked for Corps of Engineers jurisdiction |
| Bull Run | Stream nearby | Along the boundary | Checked for Corps of Engineers jurisdiction |
| Bull Run Creek | Stream nearby | 0.2 miles outside | Checked for Corps of Engineers jurisdiction |
BNSF Railway owns 13.75 track miles inside Fort Hood, and public mapping shows 11 street and rail crossings. Clear Creek runs 3.49 channel miles here, while South Nolan Creek runs 2.63 miles; four mapped street crossings meet named streams. Lake Henry and Cantonment A Pond are also inside the boundary. A route near a creek or pond needs a depth and access plan that protects the crossing and keeps entry and exit pits on workable ground.
Do I need a permit to bore in Fort Hood or Coryell County?
Fort Hood is unincorporated, so it has no city government; local streets fall under the county, while work in the right of way of Interstate 14, US 190 or a Texas highway needs a TxDOT utility permit. The TxDOT Waco District reviews highway applications, which the utility owner submits through RULIS; we prepare the bore plan and profile and work under that permit. Highway lines must meet the required cover, and existing highway pavement is bored or tunneled. A BNSF Railway crossing needs an agreement with the railroad. Clear Creek crossings are checked for federal water jurisdiction during planning.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
Whose buried lines should we check in Fort Hood and Coryell County?
The water provider for a specific address on Tank Destroyer Boulevard or elsewhere in Fort Hood has to be confirmed with the county or local water district before a bore is planned. County records report electric service from Oncor Electric Delivery Company, Texas-New Mexico Power, Hamilton County Electric Cooperative Association, Heart of Texas Electric Cooperative and United Electric Cooperative Service. We confirm the owner of the line before planning an electric conduit bore, because county service listings do not identify the provider for every address.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| Oncor Electric Delivery Company, Texas-New Mexico Power, Hamilton County Electric Cooperative Association, Heart of Texas Electric Cooperative and United Electric Cooperative Service | Electric utilities reporting service in Coryell County and Bell County | EIA Form 861 | Confirm the line owner by address |
American Community Survey 2019 to 2023 five year estimates put Fort Hood’s median housing year at 1977; 11% of homes were built before 1960, and 27% were built in 2000 or later. That mix can mean a route near Battalion Avenue serves a replacement line or a newer connection. We hydrovac pothole marked utilities on the planned path before drilling near them, since locate paint shows position, not depth.

How far is Fort Hood from Killeen and our Yukon yard?
Fort Hood is an unincorporated community in Coryell County and Bell County, at an elevation of 934 feet across 19.36 square miles. Its ZIP code is 76544. Killeen is 5.2 miles southeast, and Copperas Cove is 7.8 miles west; Gatesville, the Coryell County seat, is 21.0 miles north. Our Yukon, Oklahoma yard is 364 road miles away, about a 7.0 hour drive. That distance can affect mobilization for work near Interstate 14 or elsewhere in the community.
Places near Fort Hood
- Directional boring in Killeen: 5.2 miles southeast
- Directional boring in Copperas Cove: 7.8 miles west
- Directional boring in Harker Heights: 10 miles southeast
- Directional boring in Nolanville: 11.5 miles southeast
- Directional boring in Kempner: 11.9 miles west
What kinds of bores come up near Tank Destroyer Boulevard in Fort Hood?
- Highway crossing: A bore under Interstate 14 or US 190 needs a plan for TxDOT review, cover and the existing pavement.
- Water service: A service near Tank Destroyer Boulevard needs the address specific water provider confirmed before we plan the connection.
- Fiber conduit: A route along Battalion Avenue can use directional boring to pass beneath pavement without opening a trench across the street.
- Creek crossing: A Clear Creek route needs a planned depth below the channel and an assessment of jurisdiction during planning.
- Rail crossing: Work beneath BNSF Railway requires the railroad’s crossing agreement and its requirements for casing, depth and flagging.
- Utility conduit: Near Central Texas College, we locate and expose marked lines along the proposed bore path before the drill approaches them.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
What do you need to quote a Fort Hood bore near Interstate 14?
For a bore near Interstate 14, send the address or map pin, what is going in the ground, the pipe or conduit size and footage; a sketch or plans help. Point out whether the route approaches BNSF Railway, Clear Creek or a street such as Tank Destroyer Boulevard so we can review the crossing scope.
The price follows the work along the selected Fort Hood route. Topsey clay loam and the mapped bedrock affect drilling time; a crossing of Interstate 14 or BNSF Railway adds planning and approval steps. We also account for line size and length, utilities to expose, pavement, creek or drainage crossings, pits, excavator time and sand backfill. Mobilization from Yukon matters at 364 road miles, and high profile or emergency work can add to the scope.
Questions people ask about boring in Fort Hood
Does Trinity Boring Solutions take Fort Hood jobs in Coryell County, and how are crews assigned?
Yes. We take directional boring work in Fort Hood, including jobs in Coryell County. Our own crews and partner contractor crews working from vetted satellite yards handle the field work, while you deal with Trinity through the bore log. For a route along Tank Destroyer Boulevard, we plan the crew and equipment around the scope and crossings.
Does Topsey soil in Fort Hood pose a corrosion concern for steel, and what pipe can we use?
The USDA soil survey maps high steel corrosion risk across 38% of Fort Hood, so steel casing and tracer wire need consideration. HDPE is not affected by that soil corrosion concern. The line owner selects any coating for steel. Topsey clay loam describes mapped ground, not a material test at a particular address.
What ground might a Fort Hood bore cross in Topsey soil at about 40 inches?
Topsey is the most common mapped soil series in Fort Hood, and the USDA soil survey maps 31% silty clay loam and 23% silty clay at about 40 inches. Average clay content at that depth is 38%. Sticky clay can build on a reamer, so staged reaming and fluid control help keep the bore workable.
Will a Fort Hood bore hit rock near Clear Creek, and how much bedrock is mapped?
Rock is mapped within 60 inches across 49% of Fort Hood, including hard bedrock in 15% and weathered bedrock in 35%. Bedrock is mapped within 40 inches across 36%. Near Clear Creek, a soil to rock transition can slow the drill or change its steering, so the route needs a plan for varying ground.
Who approves a Fort Hood bore under Interstate 14, and which TxDOT office reviews it?
TxDOT reviews work in the Interstate 14 right of way through its Waco District. The utility owner submits the utility permit application in RULIS, and we provide the bore plan and profile for that filing. The permit sets the applicable crossing details, including required cover beneath the highway.
What does a Fort Hood bore under BNSF Railway require?
BNSF Railway owns the 13.75 track miles mapped inside Fort Hood. A crossing needs an agreement with BNSF Railway, which sets requirements such as casing, depth and flagging. If the route also uses highway right of way, TxDOT asks for a copy of the railroad agreement as part of that review.
How much notice does Texas811 need for a Fort Hood bore near Tank Destroyer Boulevard?
For a bore along Tank Destroyer Boulevard, the locate request must reach Texas811 at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days ahead. If the start moves more than 14 days past the original notice, submit a new request. Have worn or moved marks refreshed through Texas811 before work continues.
How far is Fort Hood from the Yukon office near Killeen, and does that affect my job?
Fort Hood is 364 road miles and about a 7.0 hour drive from our Yukon, Oklahoma main office. Killeen is 5.2 miles southeast of Fort Hood. The distance can affect mobilization, especially for a job with several crossings or a larger equipment setup, so we include the travel needs in the project scope.
What affects the cost of a Fort Hood directional bore near Interstate 14?
The route and scope determine the price, not just footage. Topsey clay loam and bedrock affect drilling conditions; Interstate 14 and BNSF Railway crossings add planning needs. We also consider pipe size, utilities to expose, pavement, Clear Creek or drainage crossings, pits and excavator time. Mobilization from Yukon is another job specific factor.
Where the Fort Hood facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside Fort Hood
- U.S. Census Bureau, TIGER/Line 2024: Fort Hood boundary, roads, rail lines and streams
- U.S. Census Bureau, 2020 Census: Fort Hood population count
- U.S. Census Bureau, American Community Survey 2019 to 2023: Fort Hood housing units and year built
- Macrostrat geologic map compilation: map units under Fort Hood
- U.S. Department of Transportation, North American Rail Network: track owners in Coryell County and Bell County
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving Coryell County and Bell County
- U.S. Geological Survey, Elevation Point Query Service: Fort Hood elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to Fort Hood
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in Fort Hood
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in Fort Hood, Texas
Type the address of your job in Fort Hood. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
County and State Pages for Fort Hood
County: Bell County directional boring. Same county: Temple · Belton · Morgan's Point Resort · Troy · Salado · Little River-Academy · Holland · Rogers · Bartlett · Pendleton · Gatesville · Oglesby. All counties: Texas county list.
