trinityboringsolutions.com

Belton Texas Directional Boring: Crawford Soil, Leon River and BNSF Railway

Quick Answer: Belton is an incorporated small city, so its streets belong to the city; our directional boring, also called horizontal directional drilling (HDD), can place lines beneath Main Street without opening the pavement. From our Yukon, Oklahoma main office, the 343 road miles to Belton matter for mobilization on work near Interstate 35. Crawford soil and shallow bedrock shape the route: bedrock is mapped at about 40 inches in 63 percent of the city, so the bore plan needs to account for rock close to grade.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Belton bores at a glance

  • County seat of Bell County, Texas. Population 25,635 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 343 miles, about 6.5 hours of driving.
  • Ground: Crawford soil is mapped on 17 percent of the area, with bedrock about 40 inches down.
  • Rock: bedrock is mapped within 60 inches on 72 percent of the area.
  • Highways inside the boundary: Interstate 35, Interstate 14, US 190, Loop 121 and Texas State Highway 317. State permit office: TxDOT Waco District.
  • Railroad track inside the boundary: BNSF Railway and Temple and Central Texas Railway, with 8 mapped street and rail crossings.
  • Named streams inside the boundary: Leon River, Nolan Creek, Lampasas River and Mitchell Branch.
  • Public water: City of Belton, surface water bought from another system.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Does anyone handle directional boring in Belton near Interstate 35?

Belton is an incorporated city and the Bell County seat, so the city owns its streets. We use Belton’s Census Bureau Vintage 2024 population estimate of 25,635 as context when planning underground work. We install water, sewer, gas, electric conduit and fiber lines, including routes beneath Connell Street or along corridors such as Interstate 35, where open trenching could disrupt traffic and access.

Our main office is in Yukon, Oklahoma, and Belton work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Across the buried water lines of the City of Belton system and electric service reported in Bell County, our record is no utility strike in over 25 years. The family business began in 1965 and has done directional boring since 1982.

Ditch Witch JT922 compact directional drill beside the Trinity Boring Solutions truck at NE 24th Street in Oklahoma City
Our Ditch Witch JT922 compact directional drill beside the Trinity truck on a sleeve bore at NE 24th Street in Oklahoma City. Photos on this page are from our jobs in Oklahoma and Texas.

What is Belton ground like around Crawford soil?

The USDA soil survey maps Crawford soil across 17 percent of Belton and Purves across 15 percent. Silty clay covers 48 percent of the surface, while clay loam covers 15 percent. At about 40 inches, bedrock is mapped in 63 percent of the city; clay loam and silty clay each account for 10 percent at that depth. The survey reports an average clay content of 34 percent at about 40 inches and sandy ground across 1 percent. Sticky clay can build on a reamer, so the drilling fluid and reaming sequence need to suit the ground.

USDA soil survey, inside the Belton city limitsWhat is mapped
Soil series mappedCrawford 17 percent, Purves 15 percent, Speck 11 percent, Eckrant 10 percent and Bosque 9 percent
Texture at the surfacesilty clay 48 percent, clay loam 15 percent and gravelly clay loam 10 percent
Texture about 40 inches downbedrock 63 percent, clay loam 10 percent and silty clay 10 percent
Engineering class about 40 inches downlean clay (CL) 21 percent and fat clay (CH) 8 percent
Average clay content about 40 inches down34 percent
Bedrock mapped within 60 inches72 percent of the area (65 percent hard rock, 7 percent weathered rock)
Seasonal water table within 60 inches0 percent of the area
Flood prone soils9 percent of the area
High corrosion risk for uncoated steel68 percent of the area

Bedrock is mapped within 60 inches across 72 percent of Belton, including hard bedrock across 65 percent and weathered bedrock across 7 percent; typical depth is 23 inches. That shallow rock can slow a bore and push the drill head at the soil to rock contact. The USDA survey maps no seasonal water table within 60 inches, but flood prone soils cover 9 percent. High steel corrosion risk covers 68 percent, so the line owner should consider casing and tracer wire protection; HDPE is not affected by soil corrosion. The mapped Cretaceous unit is undivided parts of the Washita and Fredericksburg Groups, with clay, limestone, shale and marlstone.

How do we drill Belton ground with bedrock near the surface?

Crawford silty clay and shallow mapped bedrock call for a bore plan that fits the route. Around Belton streets, we expose marked lines first, then track the drill head and record its depth and pitch.

  1. Crawford silty clay can stick to the reamer, so we use drilling fluid suited to clay and ream in stages before pulling pipe.
  2. With bedrock mapped within 60 inches across much of Belton, we check depth and pitch as the drill advances through changing ground.
  3. At a marked crossing near Main Street, we hydrovac expose each utility before the drill approaches because surface marks do not show depth.
  4. For a Leon River route, we plan the bore below the channel and check for Corps jurisdiction before setting the crossing approach.
Trinity Boring Solutions crew in hard hats at the exit pit with rock tooling on a sandstone bore in Guthrie, OK
Our crew at the exit pit with rock tooling on a sandstone bore in Guthrie, Oklahoma.

Where might a Belton line go under the Leon River?

Interstate 35, Interstate 14 and US 190 run through Belton, along with Loop 121 and several farm to market roads. A utility route beneath one of these state controlled corridors needs a different permit path from a bore beneath a city street. Main Street is the longest named street in the city at 3.7 miles, followed by Wall Street at 2.73 miles and Connell Street at 2.68 miles. Boring can keep pavement and driveways uncut, with pits placed off the travel surface.

CrossingTypeMapped extentWho has a say
Interstate 35Interstate15.9 roadway miles insideState highway office
Interstate 14Interstate11.7 roadway miles insideState highway office
US 190US highway20.1 roadway miles insideState highway office
Loop 121State highway6 roadway miles insideState highway office
Texas State Highway 317State highway3.6 roadway miles insideState highway office
FM 93State highway3.6 roadway miles insideState highway office
FM 436State highway2 roadway miles insideState highway office
FM 439State highway1.4 roadway miles insideState highway office
FM 2410State highway1.2 roadway miles insideState highway office
FM 1670State highway1.1 roadway miles insideState highway office
FM 2271State highway1 roadway miles insideState highway office
BNSF RailwayRailroad2.92 track miles insideThe railroad
Temple and Central Texas RailwayRailroad0.86 track miles insideThe railroad
Leon RiverStream6.45 channel miles insideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

BNSF Railway has 2.92 track miles in Belton, and Temple and Central Texas Railway has 0.86. Public records map eight street and rail crossings, so a route near either track needs to account for railroad review. The Leon River runs 6.45 channel miles in the city, and Nolan Creek runs 5.54; 27 street crossings of named streams are mapped. Belton Lake is also within the city limits. A water crossing needs a check for U.S. Army Corps of Engineers jurisdiction during planning.

Who approves a Belton bore near Bell County roads?

Interstate 35, Interstate 14, US 190 and the state highways in Belton are under TxDOT jurisdiction where work uses highway right of way. The TxDOT Waco District reviews the utility permit, but the line owner, not our crew, files through TxDOT’s RULIS system; we prepare the bore plan and profile for that filing. TxDOT rules call for boring or tunneling beneath an existing highway, with required cover depending on line type and crossing. A BNSF Railway crossing also needs an agreement with the railroad. For a Leon River or Nolan Creek route, planning includes checking Corps jurisdiction.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Who owns lines in Belton, including the City of Belton water system?

We account for the City of Belton public water system serving 23,054 people through 8,538 service connections and using purchased surface water. That network is one reason a proposed water route needs careful utility locating before drilling. Electric utilities reporting service in Bell County are Oncor Electric Delivery Company, Bartlett Electric Cooperative, Heart of Texas Electric Cooperative and Pedernales Electric Cooperative. We confirm the line owner before planning an electric conduit bore rather than assuming one provider serves every Belton address.

Line ownerWhat it isSourceSize
City of BeltonPublic water systemSurface water bought from another system8,538 connections, 23,054 people served
Oncor Electric Delivery Company, Bartlett Electric Cooperative, Heart of Texas Electric Cooperative and Pedernales Electric CooperativeElectric utilities reporting service in Bell CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put Belton’s median housing year at 1995; 14 percent of housing was built before 1960, and 44 percent in 2000 or later. Replacement work along Wall Street may meet older buried service lines, while newer construction can call for added service routes. Before the drill approaches a marked utility, we use hydrovac potholing to expose it. Paint shows a line’s position, not its depth.

Large HDPE conduit reels staged on a Rotate A Reel trailer for a fiber and utility installation in Oklahoma
HDPE conduit reels on a reel trailer for a fiber and utility installation in Oklahoma.

Do you cover Belton and Morgan’s Point Resort?

Belton is the Bell County seat, with 20.25 square miles of land and an elevation of 617 feet. Its ZIP code is 76513. Temple, the nearest larger city, is 6.5 miles northeast; Morgan’s Point Resort is 7.2 miles north, and Nolanville is 7.6 miles west. Salado is 7.7 miles south. The Yukon yard is 343 road miles away, about a 6.5 hour drive, which is part of planning mobilization for work around Belton and nearby communities.

Places near Belton

What kinds of bores come up around Belton Main Street?

  • Highway crossing: A bore beneath Interstate 35 needs a route and cover plan suited to the highway and the line being installed.
  • Water service: A new connection to the City of Belton system can run beneath a developed street while keeping the pavement intact.
  • Fiber conduit: A route near Main Street can pass beneath driveways and sidewalks rather than opening a continuous trench.
  • Creek crossing: A line beneath Nolan Creek needs channel depth planning and a check for Corps jurisdiction.
  • Rail crossing: A route beneath BNSF Railway needs an agreement with the track owner that addresses casing, depth and flagging.
  • Rock bore: Shallow mapped bedrock near Wall Street can call for slower drilling and close steering checks.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

How do I get a quote for Belton work near BNSF Railway?

For a Belton quote, send the address or map pin, what will go in the ground, the pipe or conduit size and the footage; a sketch or plans help. A route near BNSF Railway or the Leon River can change the scope because track and water crossings need specific planning.

A straightforward route along Connell Street with known utility locations is simpler to plan than a bore crossing BNSF Railway or the Leon River. Price reflects length, pipe or conduit size, soil and rock, utilities crossed and exposed, pavement, creek crossings, pits, excavator time and backfill. Belton’s shallow mapped bedrock can add drilling time, and mobilization accounts for the 343 road miles from Yukon. We may change scope when high profile or emergency work affects Belton’s public water system serving 23,054 people.

Questions people ask about boring in Belton

Does Trinity take directional boring jobs in Belton and Bell County, and who staffs them?

Yes. We take directional boring work in Belton and Bell County, using our own crews and partner drilling contractors we have personally vetted. On Belton projects, we work with you from the first call through the bore log, regardless of which crew performs field work. That keeps the job communication with one contractor for a route near Main Street or elsewhere in town.

Does the city or Bell County control Connell Street in Belton, and must it be cut?

The city owns its streets because Belton is incorporated. A bore under Connell Street can avoid cutting a continuous trench through the roadway, though entry and exit pits still need suitable locations. The route and utility marks determine how to place the pits without blocking the street.

How old are Belton homes and buried lines near Wall Street for replacement bores?

Belton’s median housing year is 1995, according to the American Community Survey 2019 to 2023 five year estimates. Since 14 percent of housing was built before 1960, a replacement route near Wall Street may encounter older services, but the housing data does not establish the age of a particular buried line. Near Belton’s public water system, we expose marked utilities before drilling near them.

Does Crawford soil in Belton corrode steel, and what pipe should I use?

The USDA soil survey maps high steel corrosion risk across 68 percent of Belton, including areas with Crawford soil. For Belton work, we follow the line owner’s coating choice for steel casing or tracer wire. HDPE is not affected by soil corrosion, but the right pipe depends on the project requirements and the line owner’s decision.

What ground does a Belton bore pass through in Crawford soil?

The USDA soil survey maps Crawford soil across 17 percent of Belton and silty clay across 48 percent of the surface. At about 40 inches, bedrock is mapped across 63 percent of the city, while clay loam and silty clay each cover 10 percent. These are mapped soil patterns, not test borings, so the specific route still needs planning for its ground conditions.

How much bedrock is mapped within five feet in Belton, and is it hard or weathered?

Bedrock is mapped within 60 inches across 72 percent of Belton. The USDA survey identifies hard bedrock across 65 percent and weathered bedrock across 7 percent, with typical bedrock depth of 23 inches. Shallow rock can slow the bore, and the transition from soil to rock can affect steering.

What bore sizes and lengths can Trinity handle near Beal Street in Belton?

We handle lines from 3/4 inch service lines up to 48 inch casing, with bore lengths from 10 feet to 5,000 feet. The size and length near Beal Street depend on the line, route, ground and access. A plan or sketch can help us review the proposed crossing and pit locations.

How much notice does Texas811 need for a Belton bore near Main Street, and what if marks fade?

For a bore near Main Street, Texas law requires the locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before work. If the start moves more than 14 days past the original notice, make a new request. Have worn or moved marks refreshed through Texas811 before work continues.

What affects the cost of directional boring in Belton near Interstate 35?

On Belton jobs, we set the price from the defined scope, including the underground work the project requires. Length, pipe or conduit size, Crawford soil and shallow bedrock, utilities to expose, pavement, creek or rail crossings, pits and equipment time all affect the work. A crossing near Interstate 35 can involve added route planning, and the 343 road miles from Yukon affect mobilization. We may change scope when high profile or emergency work affects Belton’s public water system serving 23,054 people.

Where the Belton facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Belton

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Belton, Texas

Type the address of your job in Belton. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Belton

Same county: Killeen · Harker Heights · Fort Hood · Troy · Holland · Rogers · Bartlett · Pendleton. All counties: Texas county list.