trinityboringsolutions.com

Krum Texas Directional Boring: Sanger Clay, BNSF Railway And Jordan Creek

Quick Answer: A line can be planned beneath BNSF Railway tracks or Jordan Creek without open cutting; Trinity Boring Solutions handles directional boring, also called horizontal directional drilling (HDD), in Krum, Texas. Krum is 178 road miles from our Yukon, Oklahoma main office, and FM 1173 is one of the state routes that shapes access. The USDA soil survey maps Sanger clay across much of Krum, where sticky clay can build on a reamer. We use staged reaming and manage fluid pressure near pavement along FM 156.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Krum bores at a glance

  • Incorporated city in Denton County, Texas. Population 6,799 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 178 miles, about 3.5 hours of driving.
  • Ground: Sanger soil is mapped on 60 percent of the area, with silty clay about 40 inches down.
  • Rock: bedrock is mapped within 60 inches on 11 percent of the area.
  • Highways inside the boundary: FM 1173, FM 156 and FM 2450. State permit office: TxDOT Dallas District.
  • Railroad track inside the boundary: BNSF Railway and BNSF Railway (line shown as out of service), with 2 mapped street and rail crossings.
  • Named streams inside the boundary: Jordan Creek and Dry Fork Hickory Creek.
  • Public water: City of Krum, surface water bought from another system.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Does anyone handle directional boring in Krum, Denton County?

Need a line beneath Jordan Creek or a BNSF Railway track without cutting across it? We take directional boring work in Krum, Denton County, where the Census Bureau Vintage 2024 estimate puts the population at 6,799. Our crews install water, sewer, gas, electric conduit and fiber for routes along streets such as McCart Street or across local drainage.

Our main office is in Yukon, Oklahoma, and Krum work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. For Krum, our range runs from 3/4 inch service lines for a small connection to 48 inch casing for a major crossing, with bores from 10 feet to 5,000 feet. Our family business started in 1965, and we have done directional boring since 1982, with work suited to routes near FM 1173 and Jordan Creek.

Ditch Witch directional drill rig with a loaded drill rod rack staged at a commercial jobsite
Our Ditch Witch directional drill with a full rack of drill rod staged at a commercial site. Photos on this page are from our jobs in Oklahoma and Texas.

What does Sanger soil mean for a bore in Krum?

The USDA soil survey maps Sanger soil across 60 percent of Krum, including Sanger clay, 1 to 3 percent slopes, on 48 percent of the mapped area and Sanger clay, 3 to 5 percent slopes, on 12 percent. At about 40 inches, silty clay is mapped under 48 percent of the city and clay under 32 percent. Surface texture is clay on 74 percent of the mapped area, while clay loam covers 16 percent. These are survey patterns, not test borings; the clay can cling to reamers, so the bore plan needs to account for sticky cuttings.

USDA soil survey, inside the Krum city limitsWhat is mapped
Soil series mappedSanger 60 percent, Lindale 10 percent, Slidell 9 percent, Burleson 6 percent and Mingo 6 percent
Texture at the surfaceclay 74 percent, clay loam 16 percent and loam 5 percent
Texture about 40 inches downsilty clay 48 percent, clay 32 percent and bedrock 11 percent
Engineering class about 40 inches downfat clay (CH) 79 percent and clayey gravel (GC) 10 percent
Average clay content about 40 inches down47 percent
Bedrock mapped within 60 inches11 percent of the area (11 percent hard rock, 0 percent weathered rock)
Seasonal water table within 60 inches0 percent of the area
Flood prone soils0 percent of the area
High corrosion risk for uncoated steel95 percent of the area

The USDA survey maps bedrock within 60 inches on 11 percent of Krum, with a typical depth of 28 inches; the mapped bedrock there is hard, not weathered. That means some routes may meet rock sooner than others, and a soil to rock change can push the drill head off line. Seasonal water table and flood prone soils are not mapped in the survey. High steel corrosion risk is mapped on 95 percent of the area, so the line owner should consider casing and tracer wire materials. The geologic map includes Stony calcareous clay solution residuum of Cenozoic age, with clay, chalk, limestone and shale.

How do we bore Krum’s silty clay?

Krum’s Sanger clay and silty clay call for steady control of the hole, not excess fluid. Around FM 156 pavement, we keep pressure in check while opening the bore in stages.

  1. Because Sanger clay is common in Krum, we use a thinner drilling fluid with polymer and open the hole in stages to manage sticky clay cuttings.
  2. With heavy clay mapped under much of Krum, we watch fluid returns near FM 156 pavement and keep pressure controlled to avoid lifting the surface.
  3. Before drilling near a marked utility on McCart Street, we hydrovac pothole it to check its depth; surface paint alone does not show how deep it lies.
  4. At routes near Jordan Creek, we track the drill head from the surface and log depth and pitch so a change from clay toward mapped bedrock is noticed.
Bore pit with a 6 inch PVC sleeve, traffic cones and blue water line flags at NE 24th Street in Oklahoma City
A bore pit with a 6 inch PVC sleeve, traffic cones and blue water line flags at NE 24th Street in Oklahoma City.

What might a new line cross in Krum near BNSF Railway?

FM 1173, FM 156 and FM 2450 run inside Krum, while US 380 is 1.1 miles outside the city limits. Work alongside or beneath those roads needs a route planned around the roadway and its right of way. Radecke Road is the longest named street in the city at 1.66 miles, followed by Hopkins Road at 1.32 miles and Masch Branch Road at 1.16 miles. McCart Street adds another local route to check for existing services before a bore is laid out.

CrossingTypeMapped extentWho has a say
FM 1173State highway2.4 roadway miles insideState highway office
FM 156State highway2.1 roadway miles insideState highway office
FM 2450State highway0.8 roadway miles insideState highway office
US 380Highway nearby1.1 miles outsideState highway office
BNSF RailwayRailroad1.71 track miles insideThe railroad
BNSF Railway (line shown as out of service)Railroad0.42 track miles insideThe railroad
CPKC (Kansas City Southern)Railroad nearby0.4 miles outsideThe railroad
Jordan CreekStream1.51 channel miles insideChecked for Corps of Engineers jurisdiction
Dry Fork Hickory CreekStream1.47 channel miles insideChecked for Corps of Engineers jurisdiction
North Hickory CreekStream nearby0.2 miles outsideChecked for Corps of Engineers jurisdiction
Milam CreekStream nearby0.7 miles outsideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

BNSF Railway has 1.71 track miles in Krum, plus 0.42 track miles shown as out of service; the BNSF Railway Fort Worth Subdivision and an Amtrak route are on the track. Public mapping shows 2 street and rail crossings inside the city. Jordan Creek runs 1.51 channel miles through Krum, and Dry Fork Hickory Creek runs 1.47 miles, with 3 mapped street crossings of named streams. Those crossings call for route and access planning around tracks and creek banks.

Who approves work near FM 1173 in Krum?

FM 1173 is a state highway, so a utility bore in its right of way needs a TxDOT utility permit reviewed by the TxDOT Dallas District. The utility that owns the line files the application in TxDOT’s RULIS system; we provide the bore plan and profile and work under the permit issued to that owner. TxDOT rules call for boring or tunneling beneath existing highway pavement. Krum’s city streets belong to the city itself. A crossing under BNSF Railway also needs an agreement with the railroad, and Jordan Creek is checked for U.S. Army Corps of Engineers jurisdiction during planning.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Who runs Krum’s water system through City of Krum?

The City of Krum public water system is locally owned, uses purchased surface water, and reports 2,435 service connections serving 6,062 people. That gives a water route near FM 1173 or McCart Street a local system owner to identify before planning a tie in. Electric service reported in Denton County includes Oncor Electric Delivery Company, Texas New Mexico Power, City of Denton and several cooperatives. The electric line owner is confirmed before a conduit bore, rather than assuming one provider serves every Krum address.

Line ownerWhat it isSourceSize
City of KrumPublic water systemSurface water bought from another system2,435 connections, 6,062 people served
Oncor Electric Delivery Company, Texas-New Mexico Power, City of Denton, Cooke County Electric Cooperative Association, Denton County Electric Cooperative, Tri-County Electric Cooperative and Wise Electric CooperativeElectric utilities reporting service in Denton CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put Krum’s median year built at 2004; 65 percent of housing units date from 2000 or later, and 2 percent were built before 1960. Along McCart Street, that mix can mean either a newer service route or an older line needing replacement. We hydrovac pothole marked utilities on the bore path before drilling near them; paint shows where a line is, not its depth.

Reel of yellow polyethylene gas pipe on a trailer staged for a directional bore
A reel of yellow polyethylene gas pipe on a trailer, staged for a directional bore.

How far is Krum from Denton and nearby towns?

Krum is an incorporated city in Denton County, at an elevation of 725 feet across 3.0 square miles, with ZIP code 76249. Denton, the county seat and nearest larger city, is 5.8 miles southeast. Ponder is 7.7 miles southwest, and Sanger is 8.8 miles northeast. From our Yukon, Oklahoma main office, Krum is 178 road miles away, or a 3.5 hour drive. Those distances matter when setting up a crew and equipment for work along FM 1173 or near Jordan Creek.

Places near Krum

What boring work may come up on Radecke Road in Krum?

  • Highway crossing: A bore beneath FM 1173 can carry water pipe or conduit without opening the paved road surface.
  • Water service: A connection near McCart Street can link a property route to the City of Krum system after existing lines are exposed.
  • Fiber route: Conduit along Radecke Road can serve a longer street run while keeping pavement and driveways intact.
  • Creek crossing: A line beneath Jordan Creek can avoid cutting the channel banks, with the crossing checked during planning.
  • Rail crossing: A bore beneath BNSF Railway track needs the railroad’s agreement and a plan for the track crossing.
  • Drainage route: Dry Fork Hickory Creek has 1.47 channel miles in Krum, so a nearby bore can be planned to pass beneath the channel.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What do you need to quote a bore near Jordan Creek in Krum?

For a route near Jordan Creek, start with its address or a map pin so we can see the crossing and access. Tell us what is going in the ground, such as water pipe or fiber conduit, then give the pipe or conduit size and footage. A sketch or plans for the approach from Radecke Road help us understand the route.

The job details set the price. Ground conditions matter: Krum’s Sanger clay can load a reamer, and the mapped bedrock depth may affect drilling time. Crossings matter too, including BNSF Railway tracks, FM 1173 pavement, marked utilities and creek drainage. Logistics include pits, excavator time, sand backfill and mobilization from Yukon, 178 road miles away. Concrete, access limits, high profile work or an emergency response can also change the work required.

Questions people ask about boring in Krum

Does Trinity Boring Solutions take jobs in Krum, Denton County, and how are crews assigned?

Yes. We take directional boring work in Krum, Denton County, and handle the job through our Yukon main office. Our own crews and crews from partner drilling contractors we have vetted can do the field work. You work with Trinity from the first call through the bore log, including a route near FM 1173.

Is there rock under Krum, and how much bedrock does the survey map?

Rock is possible on some Krum routes. The USDA soil survey maps bedrock within 60 inches on 11 percent of the city, with a typical depth of 28 inches; that mapped bedrock is hard, while weathered bedrock is not mapped within 60 inches. Routes through Sanger clay may therefore meet different conditions at different locations.

Who approves a utility bore under FM 1173 in Krum?

TxDOT reviews the utility permit for work in the FM 1173 right of way through its Dallas District. The utility owner submits the application in TxDOT’s RULIS system, while we provide the bore plan and profile. A bore beneath existing FM 1173 pavement is installed by boring or tunneling.

What does a Krum bore under BNSF Railway require?

A bore beneath BNSF Railway track needs an agreement with the railroad that owns it. The railroad sets the crossing conditions, including casing, depth and flagging. Krum has 1.71 track miles shown for BNSF Railway and 0.42 miles of track marked out of service, so the track location needs to be identified for the proposed route.

Can a line be bored under Jordan Creek in Krum?

A bore can be planned beneath Jordan Creek without cutting across its banks. The creek runs 1.51 channel miles within Krum, and the crossing is checked for U.S. Army Corps of Engineers jurisdiction during planning. Nearby access and ground conditions still need to be considered for the entry and exit pits.

Who runs Krum’s public water system, and where does its water come from?

The City of Krum owns the public water system, which uses purchased surface water. The system reports 2,435 service connections and serves 6,062 people. For a water line near McCart Street, identifying the existing system and proposed connection helps define the bore route.

What bore sizes and lengths can Trinity handle near McCart Street in Krum?

We handle lines from 3/4 inch service sizes up to 48 inch casing, with bore lengths from 10 feet to 5,000 feet. Near McCart Street, the size and footage depend on what the route needs to carry and the obstacles along it. A sketch helps show the path and access for the pits.

How much Texas811 notice does a Krum bore near Radecke Road need?

For a bore near Radecke Road, request a Texas811 locate at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before work. If the start slips more than 14 days beyond the original notice, submit a new request. Worn or moved marks must be refreshed through Texas811 before work continues.

What affects the cost of directional boring near FM 1173 in Krum?

The job’s length, pipe or conduit size, Krum’s clay and any mapped rock all affect the work. Crossings such as FM 1173, BNSF Railway and marked utilities add planning and exposure needs. Concrete, creek drainage, pits, excavator time, sand backfill and the 178 road miles from Yukon can also affect mobilization and job scope.

Where the Krum facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Krum

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Krum, Texas

Type the address of your job in Krum. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Krum

Same county: Lewisville · Frisco · Carrollton · Flower Mound · Little Elm · The Colony · Dallas · Corinth · Fort Worth · Highland Village · Trophy Club · Roanoke. All counties: Texas county list.