trinityboringsolutions.com

Avinger Texas Directional Boring: Bowie Fine Sandy Loam, Johnson Creek, CPKC Track

Quick Answer: On Main Street and Texas State Highway 49, we provide directional boring, also called horizontal directional drilling (HDD), in Avinger. Avinger sits 320 road miles from our Yukon, Oklahoma main office, and the CPKC (Kansas City Southern) track is another crossing to plan around. Bowie soil covers 38 percent of the mapped area; sandy clay loam is mapped at about 40 inches. That clay rich layer can grip tooling, so we ream in stages and manage drilling fluid.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Avinger bores at a glance

  • Incorporated city in Cass County, Texas. Population 376 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 320 miles, about 6.4 hours of driving.
  • Ground: Bowie soil is mapped on 38 percent of the area, with sandy clay loam about 40 inches down.
  • Rock: bedrock is mapped within 60 inches on 2 percent of the area.
  • Highways inside the boundary: Texas State Highway 49 and Texas State Highway 155. State permit office: TxDOT Atlanta District.
  • Railroad track inside the boundary: CPKC (Kansas City Southern), with 3 mapped street and rail crossings.
  • Named streams inside the boundary: Johnson Creek.
  • Public water: City of Avinger, surface water bought from another system.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who can I call for directional boring near Johnson Creek in Avinger?

For routes along Main Street in Avinger, Cass County, Trinity Boring Solutions takes directional boring; the Census Bureau Vintage 2024 estimate counts 376 residents. We place water, sewer, gas, electric conduit and fiber beneath streets such as West Depot, choosing a bore path that leaves the road surface intact.

Our main office is in Yukon, Oklahoma, and Avinger work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our family business began in 1965, with directional boring in our work since 1982; that history shapes how we plan Avinger’s Main Street service runs and Johnson Creek crossing needs. Our capacity spans 3/4 inch service lines to 48 inch casing, with bores from 10 feet to 5,000 feet.

Trinity Boring Solutions Vermeer D24x40 directional drill set up for a bore
Our Vermeer D24x40 directional drill set up for a bore. Photos on this page are from our jobs in Oklahoma and Texas.

What does the soil survey show about Bowie soil in Avinger?

The USDA soil survey maps Bowie soil across 38 percent of Avinger, with Cuthbert at 21 percent, Lilbert at 11 percent and Kirvin at 9 percent. These are mapped shares, not test borings. At about 40 inches, 86 percent of the area is mapped as sandy clay loam and 9 percent as clay loam. The mapped average clay content there is 28 percent, while sandy ground is mapped in 2 percent of the area. Clay in the bore path can help hold an opening but may cling to the reamer or pipe.

USDA soil survey, inside the Avinger city limitsWhat is mapped
Soil series mappedBowie 38 percent, Cuthbert 21 percent, Lilbert 11 percent, Kirvin 9 percent and Tenaha 8 percent
Texture at the surfacefine sandy loam 44 percent, gravelly fine sandy loam 28 percent and loamy fine sand 27 percent
Texture about 40 inches downsandy clay loam 86 percent and clay loam 9 percent
Engineering class about 40 inches downlean clay (CL) 56 percent and clayey sand (SC) 39 percent
Average clay content about 40 inches down28 percent
Bedrock mapped within 60 inches2 percent of the area (0 percent hard rock, 2 percent weathered rock)
Seasonal water table within 60 inches40 percent of the area
Flood prone soils2 percent of the area
High corrosion risk for uncoated steel50 percent of the area

The soil survey puts typical bedrock depth at 37 inches, though bedrock within 60 inches is mapped in only 2 percent of Avinger. Seasonal water tables within 60 inches are mapped across 40 percent, so pits may need pumping. Flood prone soils cover 2 percent. High steel corrosion risk is mapped in 50 percent, a concern for uncoated steel casing or tracer wire that the line owner can address with coating choices. The Eocene Weches Formation includes sand and clay interbeds, so ground can change along a bore.

How do we bore Avinger’s sandy clay loam while planning directional boring for underground work?

Avinger’s mapped sandy clay loam and fine sandy loam call for controlling fluid and keeping the hole stable. We match the reaming sequence to the route, whether it follows Main Street or approaches Johnson Creek.

  1. In Bowie soil, we open the bore in stages and use drilling fluid suited to the mapped sandy clay loam so the reamer can move without loading up.
  2. Where fine sandy loam or loamy fine sand lines a Main Street route, we keep fluid controlled and prepare the pipe before the final reaming pass.
  3. For a bore near Johnson Creek, we track the drill head from the surface and log depth and pitch as it advances through changing ground.
  4. With seasonal water tables mapped within 60 inches across 40 percent of Avinger, we keep pits small and have pumping ready if water collects.
Bore pit with a 6 inch PVC sleeve, traffic cones and blue water line flags at NE 24th Street in Oklahoma City
A bore pit with a 6 inch PVC sleeve, traffic cones and blue water line flags at NE 24th Street in Oklahoma City.

What is in the way of a new line in Avinger near Main Street?

Texas State Highway 49 and Texas State Highway 155 each have 1.7 mapped roadway miles inside Avinger. The TxDOT Atlanta District reviews utility work on those state rights of way. Main Street is the longest named street at 1.58 miles, followed by West Depot at 1.0 mile and East Depot at 0.64 mile. A bore can pass beneath pavement instead of cutting across it. Open trenching through intersecting roads or driveways needs written approval from the district engineer.

CrossingTypeMapped extentWho has a say
Texas State Highway 49State highway1.7 roadway miles insideState highway office
Texas State Highway 155State highway1.7 roadway miles insideState highway office
CPKC (Kansas City Southern)Railroad1.7 track miles insideThe railroad
Johnson CreekStream0.86 channel miles insideChecked for Corps of Engineers jurisdiction
Cattail CreekStream nearby0.3 miles outsideChecked for Corps of Engineers jurisdiction
Cannon CreekStream nearby0.4 miles outsideChecked for Corps of Engineers jurisdiction
Cow Horn CreekStream nearby0.5 miles outsideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

The CPKC (Kansas City Southern) Greenville Subdivision has 1.7 track miles inside Avinger, with 3 mapped street and rail crossings. Johnson Creek runs 0.86 channel miles in town, and 2 mapped street crossings intersect named streams. Cattail Creek, Cannon Creek and Cow Horn Creek are also mapped within 1 mile outside the town limits. No lakes or ponds are mapped within 1 mile, so the creek and rail routes are the main water and track features to consider.

Whose permission does an Avinger bore near CPKC (Kansas City Southern) need?

Texas State Highway 49 and Texas State Highway 155 are TxDOT routes, and the TxDOT Atlanta District reviews utility permits for their rights of way. The utility owner submits the application through TxDOT’s RULIS system; we provide the bore plan and profile and work under the permit issued to that owner. For Avinger highway crossings, we follow TxDOT rules and bore or tunnel beneath existing highway pavement. Electric, communication and water lines need 60 inches of cover at crossings, as do pressurized sewer lines. A CPKC track crossing needs an agreement with the railroad. Johnson Creek crossings are checked for U.S. Army Corps of Engineers jurisdiction during planning. Avinger is incorporated, so its streets belong to the town.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Who owns the lines already in the ground in Avinger, Cass County?

The City of Avinger public water system uses purchased surface water and serves 371 people through 271 service connections. For electric service in Cass County, reporting utilities include Southwestern Electric Power, Bowie-Cass Electric Cooperative, Southwest Arkansas Electric Cooperative and Upshur Rural Electric Cooperative. The utility serving a particular route must be identified before a conduit bore, since those county listings do not establish which provider owns each line.

Line ownerWhat it isSourceSize
City of AvingerPublic water systemSurface water bought from another system271 connections, 371 people served
Southwestern Electric Power, Bowie-Cass Electric Cooperative, Southwest Arkansas Electric Cooperative and Upshur Rural Electric CooperativeElectric utilities reporting service in Cass CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put Avinger’s median housing year at 1967; 41 percent of homes were built before 1960, while 26 percent date to 2000 or later. Older streets can involve replacement lines, while newer connections may need service routes. Along West Depot, our rule is to hydrovac pothole every marked utility before drilling nearby because locate paint shows position, not depth. For a proposed bore beneath Main Street, we expose marked lines before the drill approaches.

Trinity Boring Solutions technician hydrovac daylighting along a commercial curbline during utility locating in Oklahoma City
Hydrovac daylighting along a commercial curb line in Oklahoma City to find the utilities before a bore.

What is near Avinger, including Gilmer?

Avinger is an incorporated town in Cass County at elevation 394 feet, covering 1.94 square miles, with ZIP code 75630. Hughes Springs is 8.4 miles northwest, Pine Harbor is 9.4 miles south, Lone Star is 9.5 miles west and Ore City is 11.7 miles southwest. Linden, the county seat, is 13.5 miles northeast. Gilmer, the nearest larger city, is 25.5 miles southwest. From our Yukon, Oklahoma main office, Avinger is 320 road miles and a 6.4 hour drive, which adds travel and mobilization planning to a job.

Places near Avinger

Which jobs call for a bore in Avinger near West Depot?

  • Highway crossing: A route beneath Texas State Highway 49 can use a bore to avoid cutting existing pavement, with the TxDOT permit planned through the utility owner.
  • Water service: A connection near the City of Avinger water system can be routed beneath Main Street without opening the street surface.
  • Rail crossing: A line crossing the CPKC (Kansas City Southern) track needs its own crossing plan and railroad agreement.
  • Creek crossing: A bore near Johnson Creek keeps the channel banks uncut while the crossing is planned for ground and water conditions.
  • Fiber route: Fiber conduit beside West Depot can run underground while marked utilities are exposed ahead of the drill.
  • Replacement line: A water or sewer replacement near East Depot can be bored beneath pavement, with the route set around existing lines.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What do you need to quote a bore in Avinger near Violet Hill?

Start with the address or map pin, such as a route near Violet Hill, then tell us what needs to go underground. Give the pipe or conduit size and the footage, whether the path runs beside Main Street or toward Johnson Creek. A sketch or plans help us understand the route and identify crossings before we scope the work.

The 320 road miles from Yukon affect mobilization for Avinger work. Bowie soil and sandy clay loam influence drilling and reaming; a route under Texas State Highway 49 or across CPKC track adds crossing requirements to plan around. We also consider bore length and pipe size, utilities to expose, pavement or concrete, creek or drainage crossings, pits, excavator time and sand backfill. Emergency or high profile work can change the scope.

Questions people ask about boring in Avinger

Does Trinity Boring Solutions take directional boring work in Cass County near Avinger?

Yes. We take directional boring work in Avinger, Cass County, and staff it with our own crews or vetted partner contractor crews working from satellite yards. You work with Trinity from the first call through the bore log, whatever crew is on site. A route near Main Street can be scoped from its address, plans and crossing details.

As we plan underground work in Avinger, who operates the public water system, and where does its purchased surface water come from?

The City of Avinger owns the public water system and uses purchased surface water, information we account for when planning boring. Avinger’s system serves 371 people through 271 service connections, figures we consider when planning underground work. For a proposed water line near Main Street, the system’s connection and the route of existing utilities help shape the bore plan.

Which electric providers report service in Cass County near Avinger, and who confirms conduit details?

Southwestern Electric Power, Bowie-Cass Electric Cooperative, Southwest Arkansas Electric Cooperative and Upshur Rural Electric Cooperative report electric service in Cass County. The line owner for the specific Avinger route confirms conduit requirements before a bore is planned. That check matters for a proposed conduit run along West Depot because county reporting does not identify the provider at every address.

Does Avinger control East Depot, and does a new line require cutting the street?

Avinger is incorporated, so its streets, including East Depot, belong to the town. A directional bore can place a line beneath the street without cutting the pavement. If a proposed route reaches Texas State Highway 155, that state highway right of way is handled through TxDOT rather than as a town street.

What do Avinger’s West Depot homes and older buried lines mean for replacement bores?

Avinger’s housing is mixed in age: the American Community Survey 2019 to 2023 estimates put the median year built at 1967, with 41 percent built before 1960 and 26 percent built in 2000 or later. A replacement line near West Depot may need a route around existing utilities; a newer service connection has a different scope.

Can groundwater or flood prone ground affect bore pits near Johnson Creek in Avinger?

It can. The soil survey maps seasonal water tables within 60 inches across 40 percent of Avinger, while flood prone soils cover 2 percent. Near Johnson Creek, those mapped conditions support planning for smaller pits and pumping if water enters them. Creek crossing depth and channel conditions also need consideration.

How early should I call Texas811 for a Main Street bore in Avinger?

For a Main Street excavation in Avinger, Texas811 requires notice at least 48 hours before work, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before excavation. For Avinger work, if the start moves more than 14 days past the original notice, we submit a new request. Before continuing underground work in Avinger, we refresh worn or moved marks through Texas811.

How far is Avinger from Gilmer, and does the Yukon drive affect a bore?

Gilmer is 25.5 miles southwest of Avinger. Our Yukon, Oklahoma main office is 320 road miles away, a 6.4 hour drive. That distance affects travel and mobilization planning for routes such as a Texas State Highway 49 crossing, along with the bore’s length, access and ground conditions.

What affects the cost of a directional bore near Texas State Highway 49 in Avinger?

The job details determine the cost, not the highway name alone. A Texas State Highway 49 route may involve TxDOT coordination, while Bowie soil, sandy clay loam, bore length and pipe size affect drilling. We also account for pavement, utilities to expose, creek or drainage crossings, pits, excavator time and the trip from Yukon.

Where the Avinger facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Avinger

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Avinger, Texas

Type the address of your job in Avinger. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Avinger

Same county: Atlanta · Queen City · Bloomburg · Douglassville · Marietta · Domino · Bivins · McLeod. All counties: Texas county list.