trinityboringsolutions.com

Bloomburg Texas Directional Boring: Cuthbert Soil, State Line Creek and CPKC Track

Quick Answer: Cuthbert soil and the CPKC track shape directional boring in Bloomburg; Trinity Boring Solutions also uses horizontal directional drilling (HDD) for routes near Arkansas Avenue. A bore near FM 249 may cross pavement or other utilities, so the route matters. We work 351 road miles from our Yukon, Oklahoma main office, and that distance affects mobilization for a State Line Creek crossing. Cuthbert fine sandy loam overlies clayier ground, which can cling to tooling and needs careful fluid control.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Bloomburg bores at a glance

  • Incorporated city in Cass County, Texas. Population 331 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 351 miles, about 7 hours of driving.
  • Ground: Cuthbert soil is mapped on 32 percent of the area, with sandy clay loam about 40 inches down.
  • Rock: bedrock is mapped within 60 inches on 32 percent of the area.
  • Highways inside the boundary: FM 249, FM 3129 and FM 74. State permit office: TxDOT Atlanta District.
  • Railroad track inside the boundary: CPKC (Kansas City Southern), with 2 mapped street and rail crossings.
  • Named streams inside the boundary: State Line Creek.
  • Public water: Bloomburg Water Supply Corporation, groundwater wells.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Which contractor handles directional boring near Arkansas Avenue in Bloomburg?

Bloomburg is in Cass County and has 331 residents, according to the Census Bureau Vintage 2024 estimate. We take directional boring and horizontal directional drilling (HDD) work for service routes and crossings in town. Water, sewer, gas, electric conduit and fiber lines can run beside FM 3129 or pass beneath a street such as Arkansas Avenue, depending on the route.

Our main office is in Yukon, Oklahoma, and Bloomburg work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. For Bloomburg planning, our family business started in 1965, and we have done directional boring since 1982. The range from 3/4 inch service lines to 48 inch casing can suit a small connection near Cypress Street or a larger crossing at FM 249.

Trinity Boring Solutions Vermeer D24x40 directional drill set up for a bore
Our Vermeer D24x40 directional drill set up for a bore. Photos on this page are from our jobs in Oklahoma and Texas.

What does the soil survey show about Bloomburg and Cuthbert soil?

The USDA soil survey maps Cuthbert fine sandy loam across 32 percent of Bloomburg and Bowie fine sandy loam across another 32 percent. Sailes fine sandy loam covers 14 percent, while Kirvin very fine sandy loam covers 13 percent. At about 40 inches below the surface, sandy clay loam is mapped under 48 percent of the area and clay under 45 percent. The survey also reports an average clay content of 36 percent at that depth. These mapped patterns point to a change from fine sandy loam near the surface to stickier ground below. Clay can cling to a reamer and grip pipe, so the bore plan needs to account for the deeper texture.

USDA soil survey, inside the Bloomburg city limitsWhat is mapped
Soil series mappedCuthbert 32 percent, Bowie 32 percent, Sailes 14 percent, Kirvin 13 percent and Kullit 6 percent
Texture at the surfacefine sandy loam 79 percent and very fine sandy loam 19 percent
Texture about 40 inches downsandy clay loam 48 percent, clay 45 percent and clay loam 6 percent
Engineering class about 40 inches downlean clay (CL) 39 percent, silt (ML) 32 percent and clayey sand (SC) 16 percent
Average clay content about 40 inches down36 percent
Bedrock mapped within 60 inches32 percent of the area (0 percent hard rock, 32 percent weathered rock)
Seasonal water table within 60 inches39 percent of the area
Flood prone soils1 percent of the area
High corrosion risk for uncoated steel84 percent of the area

The USDA soil survey maps bedrock within 60 inches across 32 percent of Bloomburg, with a typical depth of 37 inches; weathered rock can slow a bore. A seasonal water table is mapped within 60 inches across 39 percent, so pits near Mississippi Avenue may need pumping. Flood prone soils cover 1 percent, including a need to plan carefully near State Line Creek. High steel corrosion risk is mapped across 84 percent, a factor for steel casing. The Cenozoic Limonitic Sandy Decomposition Residuum includes clay, sand and weathered rock; the Eocene Weches Formation includes sandstone and claystone.

How do we plan a bore through Bloomburg’s sandy clay loam, accounting for the soil along the drilling path?

Bloomburg’s sandy clay loam at about 40 inches can transition into clay or weathered bedrock. For a route near Cuthbert soils or State Line Creek, we plan the bore and fluid use around mapped ground and actual site conditions.

  1. Where Cuthbert soil shifts to clay at depth, we can use thinner drilling fluid with polymer and ream in stages to limit sticky buildup.
  2. Near the 45 percent mapped clay share at about 40 inches, we watch fluid returns so pressure does not lift pavement along FM 249.
  3. With a seasonal water table mapped within 60 inches across 39 percent of town, we keep pits small and pump water where needed.
  4. Before a bore near State Line Creek, we expose each marked utility with hydrovac, then track depth and pitch as the drill advances.
Open bore pit in red Oklahoma dirt with white PVC conduit stub ups and an orange safety barrier
An open bore pit in red Oklahoma dirt with PVC conduit stubbed up and a safety barrier around it.

What is in the way of a new line near State Line Creek in Bloomburg?

FM 249, FM 3129 and FM 74 run through Bloomburg, and Texas State Highway 160 lies 0.4 miles outside the town limits. Arkansas Avenue is the longest named street at 1.03 miles within town; Cypress Street runs 0.72 miles and Mississippi Avenue 0.64 miles. The street map records 11.98 public road centerline miles. A bore beneath a highway or one of these streets can keep the surface uncut, but the route and right of way determine the plan.

CrossingTypeMapped extentWho has a say
FM 249State highway1.1 roadway miles insideState highway office
FM 3129State highway1 roadway miles insideState highway office
FM 74State highway0.5 roadway miles insideState highway office
Texas State Highway 160Highway nearby0.4 miles outsideState highway office
CPKC (Kansas City Southern)Railroad1.07 track miles insideThe railroad
State Line CreekStream0.76 channel miles insideChecked for Corps of Engineers jurisdiction
Little Cypress CreekStream nearby0.3 miles outsideChecked for Corps of Engineers jurisdiction
Texas CreekStream nearby0.5 miles outsideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

CPKC, also known as Kansas City Southern, has 1.07 track miles inside Bloomburg on the Shreveport Subdivision. The map shows 2 street and rail crossings, so a route near Cypress Street may need to account for the track. State Line Creek runs 0.76 channel miles inside town, and one mapped street crossing of a named stream is recorded. Little Cypress Creek lies 0.3 miles outside the limits; a creek route needs planning for banks and water conditions.

Do I need a permit to bore under roads in Bloomburg, Cass County?

Because Bloomburg is incorporated, we confirm city responsibility before planning boring along its city streets. For work in the right of way on FM 249, FM 3129, FM 74 or Texas State Highway 160, the utility owner applies for the TxDOT utility permit through RULIS, with the TxDOT Atlanta District reviewing it. We give the line owner a bore plan and profile and work under the permit issued to that owner. At state highway crossings, electric and communication lines need 60 inches of cover below the lowest crossed grade; water needs 60 inches and pressurized sewer needs 60 inches. A CPKC track crossing requires an agreement with the railroad, and State Line Creek is checked for federal jurisdiction during planning.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Which utilities serve Bloomburg through Bloomburg Water Supply Corporation?

Bloomburg Water Supply Corporation is a local government system using groundwater wells. It serves 681 people through 237 service connections, so a new connection or replacement near FM 249 should be checked against the water line route. Electric service reporting in Cass County includes Southwestern Electric Power, Bowie-Cass Electric Cooperative, Southwest Arkansas Electric Cooperative and Upshur Rural Electric Cooperative. The line owner for a proposed conduit bore along Arkansas Avenue must be identified before conduit specifications are set.

Line ownerWhat it isSourceSize
Bloomburg Water Supply CorporationPublic water systemGroundwater wells237 connections, 681 people served
Southwestern Electric Power, Bowie-Cass Electric Cooperative, Southwest Arkansas Electric Cooperative and Upshur Rural Electric CooperativeElectric utilities reporting service in Cass CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The 2019 to 2023 five year estimates place Bloomburg’s median housing year at 1991, context we consider when planning underground routes. The estimates show 23 percent of homes built before 1960, 44 percent from 1960 to 1999 and 33 percent in 2000 or later. A replacement route near Cypress Street may meet older buried lines, while a new service has its own path to clear. We hydrovac pothole each marked utility on the bore path before drilling near it; for a planned bore beneath Cypress Street, paint alone cannot show a line’s depth.

Trinity Boring Solutions technician hydrovac daylighting along a commercial curbline during utility locating in Oklahoma City
Hydrovac daylighting along a commercial curb line in Oklahoma City to find the utilities before a bore.

Do you cover Bloomburg and nearby Queen City?

Bloomburg is an incorporated town in Cass County, with an elevation of 309 feet and a land area of 1.01 square miles. Its ZIP code is 75556. Queen City is 5.5 miles west, and Atlanta is 6.5 miles west; Domino is 9.2 miles north. Linden, the county seat, is 19.6 miles southwest, while Atlanta is the nearest larger city. The Yukon, Oklahoma yard is 351 road miles away, a 7.0 hour drive. That distance is part of planning mobilization for work near FM 249 or State Line Creek.

Places near Bloomburg

What boring work comes up near Cypress Street in Bloomburg?

  • Highway crossing: A bore beneath FM 249 can pass under the travel lanes without cutting the pavement.
  • Water service: A connection near Bloomburg Water Supply Corporation may need a route beneath a street such as Arkansas Avenue.
  • Fiber conduit: A route along Cypress Street can carry conduit beneath pavement while leaving the street surface intact.
  • Creek crossing: A State Line Creek bore needs a planned path beneath the channel and attention to wet pits and creek banks.
  • Rail crossing: A line crossing the CPKC track on the Shreveport Subdivision needs the railroad’s agreement before the bore is planned.
  • Electric conduit: Near FM 3129, we identify the line owner and expose marked utilities before drilling along the proposed route.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What do you need to quote a bore near FM 249 in Bloomburg?

For work near FM 249, start with the address or a map pin. Tell us what will go in the ground, such as water pipe or fiber conduit near Arkansas Avenue, then give the pipe or conduit size and footage. A sketch or plans showing a State Line Creek crossing help us understand the route.

A short route beside Cypress Street with clear access and no creek or track crossing is simpler to plan. Cuthbert soil, clay or weathered rock can add drilling demands; State Line Creek, the CPKC track and pavement near FM 249 can add crossing work. Price also reflects length, pipe or conduit size, utilities to expose, pit and excavator time, backfill and mobilization from the Yukon yard. An emergency schedule or a high profile route changes the job requirements.

Questions people ask about boring in Bloomburg

Does Trinity take directional boring jobs in Bloomburg and Cass County?

Yes. We take Bloomburg work with our own crews or from satellite yards run by partner contractors we have vetted. Our Yukon main office stays your point of contact from the first call through the bore log, whether the route is near Arkansas Avenue or crosses FM 249.

Who runs Bloomburg’s public water system, and what water source should we account for when planning nearby boring work?

Bloomburg Water Supply Corporation runs the local government water system, and its source is groundwater wells. Bloomburg’s system serves 681 people through 237 service connections, figures we consider when planning underground work near its infrastructure. A proposed tie in near FM 3129 still needs its route checked against the existing water line.

Which companies report electric service in Bloomburg and Cass County, and who confirms conduit specs?

Southwestern Electric Power, Bowie-Cass Electric Cooperative, Southwest Arkansas Electric Cooperative and Upshur Rural Electric Cooperative report service in Cass County. The line owner for a proposed electric conduit near Mississippi Avenue should confirm the conduit specifications and identify the route before the bore is planned.

Who controls Bloomburg streets, and can a bore avoid cutting Mississippi Avenue?

Because Bloomburg is incorporated, we confirm city responsibility before planning boring along its city streets. Directional boring can pass beneath Mississippi Avenue without opening the pavement when the route and site conditions allow. The crossing plan still needs to account for marked utilities and the street right of way.

How old are Bloomburg homes and buried lines near Cypress Street?

The American Community Survey 2019 to 2023 five year estimates give Bloomburg a median housing year of 1991, with 23 percent of homes built before 1960. That makes older buried lines a consideration for replacement work near Cypress Street. Along Bloomburg’s city streets, we expose marked utilities before drilling near them to protect the planned boring path.

Can groundwater or flood prone ground affect a Bloomburg bore near State Line Creek?

It can affect pit planning. The USDA soil survey maps a seasonal water table within 60 inches across 39 percent of Bloomburg and flood prone soils across 1 percent. Near State Line Creek, we plan the crossing depth and pit locations for water and bank conditions.

How much notice does Texas811 need for a Bloomburg bore on Arkansas Avenue?

For a bore near Arkansas Avenue, Texas law requires a Texas811 locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before work. For Bloomburg street work, if the start moves more than 14 days past the original notice, we make a new request. Worn or moved marks need refreshing through Texas811 before work continues.

How far is Bloomburg from the Yukon office, and does Atlanta change the job plan?

Bloomburg is 351 road miles and a 7.0 hour drive from the Yukon, Oklahoma main office. Atlanta is 6.5 miles west of town. The Yukon distance can affect mobilization for work near FM 249, while the route and site conditions in Bloomburg determine the drilling plan.

What affects the cost of directional boring in Bloomburg near FM 249?

For Bloomburg bores through sandy clay loam, we set the price according to the job scope. Length, pipe or conduit size, soil and rock, utilities to expose, pavement, creek or rail crossings, pits and mobilization all matter. Cuthbert soil and a State Line Creek or CPKC crossing can require different planning than a short route beside FM 249.

Where the Bloomburg facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Bloomburg

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Bloomburg, Texas

Type the address of your job in Bloomburg. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Bloomburg

Same county: Linden · Hughes Springs · Avinger · Douglassville · Marietta. All counties: Texas county list.