trinityboringsolutions.com

Columbus Texas Directional Boring: Smithville Soil, Union Pacific and Ratliff Creek

Quick Answer: Columbus is an incorporated county seat, so Walnut Street is a city street; we do directional boring, or horizontal directional drilling (HDD), for routes beneath Interstate 10. Union Pacific tracks also shape crossing plans. Our Yukon, Oklahoma main office is 447 road miles away, including work near US 90. Smithville fine sandy loam covers 38% of the mapped area, while sandy clay loam is mapped at 40 inches across 56%. That mix can hold the hole open but may grip the pipe.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Columbus bores at a glance

  • County seat of Colorado County, Texas. Population 3,938 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 447 miles, about 8.8 hours of driving.
  • Ground: Smithville soil is mapped on 38 percent of the area, with sandy clay loam about 40 inches down.
  • Rock: no bedrock is mapped in the top 60 inches.
  • Highways inside the boundary: Interstate 10, US 90, Texas State Highway 71, Spur 52 and FM 806. State permit office: TxDOT Yoakum District.
  • Railroad track inside the boundary: Union Pacific, with 16 mapped street and rail crossings.
  • Named streams inside the boundary: Ratliff Creek.
  • Public water: City of Columbus, groundwater wells.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who can I call for directional boring under Interstate 10 in Columbus?

Columbus is an incorporated city and the seat of Colorado County, with 3,938 residents in the Census Bureau Vintage 2024 estimate. On routes near Interstate 10, US 90 or Texas State Highway 71, we install water, sewer, gas, electric conduit and fiber lines by directional boring. The city owns its streets, while TxDOT controls work in state highway right of way.

Our main office is in Yukon, Oklahoma, and Columbus work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our family business started in 1965, and we have worked in directional boring since 1982. The range from 3/4 inch service lines to 48 inch casing can fit a short service run or a larger crossing near Interstate 10.

Aerial view of a Trinity Boring Solutions directional drill set up for a gas line bore at a commercial site
Our directional drill set up for a gas line bore at a commercial site, seen from above. Photos on this page are from our jobs in Oklahoma and Texas.

What does the soil survey show about Smithville soil in Columbus?

The USDA soil survey maps Smithville fine sandy loam across 38% of Columbus, the largest named soil map unit in the city. At about 40 inches below the surface, sandy clay loam is mapped across 56% of the area. Surface textures include fine sandy loam across 40% and clay loam across 14%; sandy ground is mapped across 19% at that depth. These are mapped patterns, not measurements from a proposed bore. The sandy clay loam can hold an open hole, while sticky clay in the mix may build up on a reamer and grip the pipe.

USDA soil survey, inside the Columbus city limitsWhat is mapped
Soil series mappedSmithville 38 percent, Wilson 12 percent, Nez 11 percent, Gad 11 percent and Milby 5 percent
Texture at the surfacefine sandy loam 40 percent, clay loam 14 percent and loamy sand 11 percent
Texture about 40 inches downsandy clay loam 56 percent, clay 14 percent and loamy fine sand 8 percent
Engineering class about 40 inches downclayey sand (SC) 56 percent, fat clay (CH) 17 percent and lean clay (CL) 9 percent
Average clay content about 40 inches down27 percent
Bedrock mapped within 60 inchesNone mapped
Seasonal water table within 60 inches23 percent of the area
Flood prone soils10 percent of the area
High corrosion risk for uncoated steel36 percent of the area

In Columbus, bedrock is not mapped in the top five feet, so we plan for the possibility of rock at greater depth. Seasonal water tables are mapped within 60 inches across 23% of the area, so pits may need pumping or smaller footprints. Flood prone soils cover 10%, and 36% is mapped with high steel corrosion risk; the line owner selects any protection for steel casing or tracer wire. The geologic map shows Cenozoic terrace deposits of sand, silt, clay and gravel, so conditions can change along a bore route.

How do crews handle sandy clay loam in Columbus?

Columbus has sandy clay loam mapped at about 40 inches across 56% of its area. We plan the bore around the soil, nearby pavement and the lines marked along streets such as Milam Street.

  1. In Smithville fine sandy loam, we keep drilling fluid and reaming controlled so the sandy clay loam does not build up on the tool or grip the pipe.
  2. Where Columbus soil includes sand, we use staged reaming and have the pipe ready before the final pass so the bore stays supported.
  3. For pits near Ratliff Creek, the mapped seasonal water table means we plan compact excavations and pumping where water enters the work area.
  4. Along Walnut Street, we hydrovac each marked utility on the bore path, then track the drill head from the surface and log depth and pitch.
Open bore pit in red Oklahoma dirt with white PVC conduit stub ups and an orange safety barrier
An open bore pit in red Oklahoma dirt with PVC conduit stubbed up and a safety barrier around it.

What does a bore have to cross in Columbus near Union Pacific?

Interstate 10, US 90, Texas State Highway 71, Spur 52 and FM 806 run within Columbus. Texas State Highway 71 Business is 1.2 miles outside the city limits. Walnut Street is the longest named street in the city at 2.35 miles, followed by Montezuma Street at 1.5 miles and Milam Street at 1.32 miles. Where a route meets pavement or a driveway, boring can keep the surface uncut; the utility owner needs a TxDOT permit for work in state highway right of way.

CrossingTypeMapped extentWho has a say
Interstate 10Interstate0.6 roadway miles insideState highway office
US 90US highway2.4 roadway miles insideState highway office
Texas State Highway 71State highway3.7 roadway miles insideState highway office
Spur 52State highway0.9 roadway miles insideState highway office
FM 806State highway0.8 roadway miles insideState highway office
Texas State Highway 71 BusinessHighway nearby1.2 miles outsideState highway office
Union PacificRailroad1.7 track miles insideThe railroad
Ratliff CreekStream0.4 channel miles insideChecked for Corps of Engineers jurisdiction
Colorado RiverStream nearbyAlong the boundaryChecked for Corps of Engineers jurisdiction
Rocky CreekStream nearby0.3 miles outsideChecked for Corps of Engineers jurisdiction
Dry CreekStream nearby0.4 miles outsideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

Union Pacific has 1.7 track miles in Columbus on its Glidden Subdivision, and Amtrak uses that track. Public records map 16 street and rail crossings, so a route near a track needs railroad coordination. Ratliff Creek runs 0.4 miles through the city, with 2 mapped street crossings of named streams. The Colorado River touches the city boundary. Creek or river work needs a check for U.S. Army Corps of Engineers jurisdiction during planning.

Who has to sign off on a bore in Columbus and Colorado County?

Columbus is incorporated, so a bore on Walnut Street or Montezuma Street involves a city street; the city has no department or fee specified here. Interstate 10, US 90, Texas State Highway 71 and FM 806 are state routes, and TxDOT’s Yoakum District reviews right of way work. The line owner, not Trinity, files the utility permit in TxDOT’s RULIS system. We prepare the bore plan and profile for that filing. A crossing under Union Pacific track needs an agreement with the railroad, and a route at Ratliff Creek is checked for federal waterway jurisdiction during planning.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Near the City of Columbus water system, who owns the lines we need to account for when planning a boring route?

The City of Columbus public water system uses groundwater wells and serves 3,860 people through 1,972 service connections, a scale we consider when planning underground work. A water or sewer bore near Walnut Street still needs the line owner and marked facilities confirmed along the route. AEP Texas Central, CenterPoint Energy, Bluebonnet Electric Cooperative, Fayette Electric Cooperative, San Bernard Electric Cooperative and Wharton County Electric Cooperative report electric service in Colorado County. We confirm the electric line owner before planning a conduit bore.

Line ownerWhat it isSourceSize
City of ColumbusPublic water systemGroundwater wells1,972 connections, 3,860 people served
AEP Texas Central, CenterPoint Energy, Bluebonnet Electric Cooperative, Fayette Electric Cooperative, San Bernard Electric Cooperative and Wharton County Electric CooperativeElectric utilities reporting service in Colorado CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put the median Columbus home construction year at 1970; 45% of housing was built before 1960 and 13% in 2000 or later. A replacement bore near Montezuma Street may pass older buried service lines, while a new service needs a clear route to the property. We hydrovac pothole marked utilities before drilling nearby because paint shows position, not depth; older water or electric lines may not be where a surface mark suggests.

Hydrovac truck and boring equipment staged beside an airport taxiway for utility daylighting in Oklahoma City
Our hydrovac truck and boring equipment beside an airport taxiway in Oklahoma City, set up to expose a utility crossing.

Where is Columbus in relation to Brenham and our Yukon office?

Columbus is the Colorado County seat in Texas, at an elevation of 193 feet and covering 3.01 square miles. Its ZIP code is 78934. Glidden is 1.9 miles west, Ellinger is 12.9 miles northwest, and New Ulm is 13.0 miles north. Brenham, the nearest larger city listed, is 32.9 miles north. Our Yukon, Oklahoma main office is 447 road miles away, or an 8.8 hour drive. That distance can affect mobilization for work along Interstate 10 or near Ratliff Creek.

Places near Columbus

What boring work comes up on Montezuma Street in Columbus?

  • Water service: A new connection near the City of Columbus water system may need a bore from a property toward a service line along Walnut Street.
  • Highway crossing: A route beneath Interstate 10 needs a TxDOT utility permit from the line owner and a plan that keeps the highway surface intact.
  • Fiber conduit: A conduit route along Montezuma Street can avoid open cutting, with marked utilities exposed before the drill approaches them.
  • Creek crossing: A bore near Ratliff Creek needs a route planned below the channel and a check for U.S. Army Corps of Engineers jurisdiction.
  • Rail crossing: A line beneath Union Pacific track on the Glidden Subdivision needs an agreement with the railroad before the crossing is planned.
  • Sewer replacement: A bore near Robson Street can replace a buried service while leaving the street surface uncut.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

How do I get a quote for a bore near Robson Street in Columbus?

Send a map pin or address near Robson Street, Ratliff Creek or the actual crossing point. The exact spot matters because the route can meet a street, stream or marked utility in a different place than expected. Include what will go in the ground, the pipe or conduit size and the footage; a sketch or plans help us scope the bore.

Price follows the route and ground conditions, with soil first because Columbus has sandy clay loam at 40 inches and sticky clay can affect reaming and pullback. The number and exposure of utilities, pipe size and length also matter. A crossing beneath Interstate 10 or Union Pacific track adds coordination, while pavement, creek work, pits, backfill and excavator time change the work plan. Mobilization is part of the scope because Columbus is 447 road miles from Yukon.

Questions people ask about boring in Columbus

Does Trinity take directional boring jobs in Colorado County, including Columbus?

Yes. We take directional boring work in Columbus and staff it with our own crews or crews from partner drilling contractors we have vetted. You work with Trinity through planning and the bore log, including on routes near Interstate 10. Across Columbus, we install water, sewer, gas, electric conduit and fiber lines, planning routes around local underground conditions.

How old are buried lines near Montezuma Street in Columbus?

The American Community Survey 2019 to 2023 estimates put Columbus’s median housing year at 1970, with 45% of homes built before 1960. That does not date each buried line, but replacement bores near Montezuma Street may encounter older services. In Columbus, we expose marked utilities before drilling close to them to protect underground lines along our planned work route.

Could groundwater or flooding affect bore pits near Ratliff Creek in Columbus?

It can. The USDA soil survey maps a seasonal water table within 60 inches across 23% of Columbus and flood prone soils across 10%. Near Ratliff Creek, we account for water entering pits and plan the bore depth to pass beneath the channel; creek work is checked for federal jurisdiction during planning.

Does Smithville soil in Columbus create a corrosion concern for steel pipe?

The USDA soil survey maps high steel corrosion risk across 36% of Columbus. The line owner chooses protection for steel casing or tracer wire based on the project. HDPE is not subject to that steel corrosion concern, and the material choice depends on the line design near places such as Walnut Street.

What ground does a bore pass through in Smithville soil areas of Columbus?

Smithville fine sandy loam is mapped across 38% of Columbus. At about 40 inches, sandy clay loam is the leading mapped texture, covering 56% of the area. These survey patterns help guide planning, but they are not a test of the exact route near Montezuma Street.

Will our directional boring in Columbus hit rock, given bedrock is not mapped in the top five feet but may occur deeper?

For Columbus projects, we account for possible deeper rock even though bedrock is not mapped in the top five feet. The geologic map shows Cenozoic terrace deposits of sand, silt, clay and gravel. A route near the Colorado River may encounter changing material, so the bore plan accounts for actual drilling conditions.

How much notice does Texas811 need for a bore on Walnut Street in Columbus?

Texas law requires a locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before. If work on Walnut Street slips more than 14 days past the original notice, a new request is needed. When marks are worn or moved in Columbus, we have them refreshed through Texas811 before work continues.

How far is Columbus from Yukon, and does Brenham change mobilization?

Columbus is 447 road miles from our Yukon, Oklahoma main office, an 8.8 hour drive. Brenham is 32.9 miles north of Columbus, but the job location and work scope determine mobilization. A route near Interstate 10 or Ratliff Creek may also affect equipment and planning needs.

What affects the cost of directional boring near Interstate 10 in Columbus?

The route length, pipe or conduit size, soil, utility crossings and pavement all affect the work. At Interstate 10, a TxDOT permit and highway crossing conditions matter; near Union Pacific track, railroad coordination is part of planning. Ratliff Creek work, pits, backfill and mobilization from Yukon can also change the scope.

Where the Columbus facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Columbus

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Columbus, Texas

Type the address of your job in Columbus. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Columbus

Same county: Eagle Lake · Garwood · Nada · Sheridan. All counties: Texas county list.