Gallatin Texas Directional Boring: Bowie Soil, FM 768 And Little Turnpike Creek
Quick Answer: Gallatin Water Supply Corporation and county electric providers have buried lines, so we verify ownership before a bore beside FM 768. Trinity handles directional boring, also called horizontal directional drilling (HDD), for crossings on Gallatin streets and highways. Our Yukon main office is 340 road miles away, a factor for work near Little Turnpike Creek. USDA maps Bowie soil and sandy clay loam below ground; clay can cling to the reamer and grip pipe.
Gallatin bores at a glance
- Incorporated city in Cherokee County, Texas. Population 342 (Census Bureau 2024 estimate).
- Road distance from our Yukon, Oklahoma main office: 340 miles, about 6.9 hours of driving.
- Ground: Bowie soil is mapped on 22 percent of the area, with sandy clay loam about 40 inches down.
- Rock: bedrock is mapped within 60 inches on 13 percent of the area.
- Highways inside the boundary: FM 768, FM 22 and Texas State Highway 204. State permit office: TxDOT Tyler District.
- Railroad track inside the boundary: none mapped.
- Named streams inside the boundary: Little Turnpike Creek, Turnpike Creek, Dry Creek and Keys Creek.
- Public water: Gallatin Water Supply Corporation, groundwater wells.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Which contractor handles directional boring on Gallatin’s Piney Grove Road?
Gallatin is in Cherokee County, where the Census Bureau Vintage 2024 estimate puts the population at 342. On Piney Grove Road or County Road 1508, we install water, sewer, gas, electric conduit and fiber by directional boring when the route needs to pass beneath pavement or a driveway. The line owner and exact route shape the plan.
Our main office is in Yukon, Oklahoma, and Gallatin work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. A short 3/4 inch service line near 1st Avenue and a 48 inch casing on an extended FM 768 crossing fall within our 10 feet to 5,000 feet range. Our family business started 1965, and directional boring has been part of the work since 1982.

What is Gallatin ground like to bore through Bowie soil?
The USDA soil survey maps Bowie fine sandy loam, 3 to 8 percent slopes across 18 percent of Gallatin. Fine sandy loam is the leading surface texture, mapped in 75 percent of the city. At about 40 inches below the surface, sandy clay loam is mapped under 55 percent of the area, clay under 23 percent, and fine sandy loam under 14 percent. We treat mapped Bowie, Iulus, Cuthbert, and Lilbert patterns near Piney Grove Road as guides, not test borings. Clay at depth can cling to a reamer and grip the pipe, so the crew needs to manage fluid and reaming.
| USDA soil survey, inside the Gallatin city limits | What is mapped |
|---|---|
| Soil series mapped | Bowie 22 percent, Iulus 14 percent, Cuthbert 10 percent, Lilbert 10 percent and Elrose 10 percent |
| Texture at the surface | fine sandy loam 75 percent, loamy fine sand 18 percent and clay loam 4 percent |
| Texture about 40 inches down | sandy clay loam 55 percent, clay 23 percent and fine sandy loam 14 percent |
| Engineering class about 40 inches down | clayey sand (SC) 46 percent, lean clay (CL) 19 percent and fat clay (CH) 17 percent |
| Average clay content about 40 inches down | 28 percent |
| Bedrock mapped within 60 inches | 13 percent of the area (0 percent hard rock, 13 percent weathered rock) |
| Seasonal water table within 60 inches | 51 percent of the area |
| Flood prone soils | 20 percent of the area |
| High corrosion risk for uncoated steel | 47 percent of the area |
The USDA survey maps weathered bedrock within 60 inches in 13 percent of Gallatin, with typical bedrock depth at 36 inches. The Reklaw Formation is Eocene sandstone and clay; Quartz Sand Decomposition Residuum is Cenozoic sand. Those materials can slow a bore where the drill meets weathered rock. A seasonal water table is mapped within 60 inches in 51 percent of the area, and flood prone soils in 20 percent, so pits near Little Turnpike Creek need water planning and a careful crossing profile. High steel corrosion risk is mapped in 47 percent of the city; the line owner should address casing and tracer wire materials.
How do crews bore Gallatin’s sandy clay loam?
Gallatin’s sandy clay loam at about 40 inches can turn sticky when cut, while fine sandy loam covers much of the surface. We match the fluid, reaming sequence and pit plan to the route.
- At Bowie fine sandy loam locations, we control fluid and ream in stages so sticky material does not build up on the tooling or grip the pipe.
- Where the survey maps sandy clay loam at about 40 inches, we keep the pipe ready and pull it soon after the hole is opened.
- For a route near Little Turnpike Creek, we plan the pit depth and water handling around the mapped seasonal water table and flood prone soils.
- On a path crossing FM 768, we pothole each marked utility, then track the drill head from the surface and log its depth and pitch.

What does a bore have to cross in Gallatin near FM 768?
FM 768 has 3.2 mapped roadway miles inside Gallatin. FM 22 has 2.2 miles, and Texas State Highway 204 has 1.2 miles. A crossing beneath any of these state routes needs a plan for its right of way and pavement. Among named streets, Piney Grove Road runs 1.9 miles in the city, County Road 1508 runs 1.8 miles, and 1st Avenue runs 1.58 miles. Old Freight Road adds another 1.35 miles of local route to consider for service work.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| FM 768 | State highway | 3.2 roadway miles inside | State highway office |
| FM 22 | State highway | 2.2 roadway miles inside | State highway office |
| Texas State Highway 204 | State highway | 1.2 roadway miles inside | State highway office |
| Little Turnpike Creek | Stream | 2.54 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Turnpike Creek | Stream | 2.16 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Dry Creek | Stream | 0.83 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Keys Creek | Stream | 0.33 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Mud Creek | Stream nearby | 0.7 miles outside | Checked for Corps of Engineers jurisdiction |
| Taylor Branch | Stream nearby | 0.8 miles outside | Checked for Corps of Engineers jurisdiction |
| Sandy Creek | Stream nearby | 0.9 miles outside | Checked for Corps of Engineers jurisdiction |
| Anderson Branch | Stream nearby | 0.9 miles outside | Checked for Corps of Engineers jurisdiction |
No railroad is mapped inside Gallatin or within 1 mile outside the limits, and none is mapped at a street crossing. Little Turnpike Creek runs 2.54 channel miles in the city, Turnpike Creek 2.16 miles, and Dry Creek 0.83 miles. Keys Creek adds 0.33 miles. Public mapping shows 7 street crossings of named streams. A creek bore is checked for U.S. Army Corps of Engineers jurisdiction during planning; no lakes or ponds are mapped within 1 mile.
Who approves a Gallatin bore in Cherokee County?
Because Gallatin is an incorporated city, we confirm city street responsibility before boring on 1st Avenue. For work in the right of way of FM 768, FM 22 or Texas State Highway 204, the line owner files the utility permit in TxDOT’s RULIS system, with the TxDOT Tyler District reviewing it. We give the owner the bore plan and profile and work under the permit issued to that owner. For FM 768 crossings, we plan boring or tunneling beneath existing highway pavement to meet TxDOT requirements. Cover depends on the line: electric and communication lines need 60 inches at crossings, water 60 inches, and pressurized sewer 60 inches. At Texas State Highway 204, we check with the TxDOT Tyler District because it can set a different depth.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
Who owns the Gallatin Water Supply Corporation lines?
Gallatin Water Supply Corporation is a local government public water system using groundwater wells. It serves 996 people through 332 service connections, so its lines may be part of a service route near Piney Grove Road or FM 768. Electric service providers reporting in Cherokee County include Oncor Electric Delivery Company, Cherokee County Electric Cooperative Association and Houston County Electric Cooperative. We confirm which company owns the line at the address before planning an electric conduit bore.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| Gallatin Water Supply Corporation | Public water system | Groundwater wells | 332 connections, 996 people served |
| Oncor Electric Delivery Company, Cherokee County Electric Cooperative Association and Houston County Electric Cooperative | Electric utilities reporting service in Cherokee County | EIA Form 861 | Confirm the line owner by address |
The American Community Survey 2019 to 2023 five year estimates give Gallatin a median housing year of 1970. The estimates put 36 percent of homes before 1960, 54 percent from 1960 to 1999, and 10 percent in 2000 or later. That mix can mean a replacement route near County Road 1508 as well as new service work. Before drilling near a marked water or electric line, we hydrovac pothole to verify its depth; surface marks show position, not depth.

What is near Gallatin, including New Summerfield?
Gallatin is an incorporated city in Cherokee County, at an elevation of 348 feet and covering 4.6 square miles. For a bore request on Chandler Street, we record Gallatin ZIP codes 75785, 75766 and 75764 for coordination. New Summerfield is 6.2 miles north; Rusk is 6.8 miles south, and Jacksonville is 7.9 miles northwest. Rusk is both the county seat and the nearest larger city. Gallatin is 340 road miles and 6.9 drive hours from our Yukon, Oklahoma main office, a factor in moving equipment for work near FM 768 or Little Turnpike Creek.
Places near Gallatin
- Directional boring in New Summerfield: 6.2 miles north
- Directional boring in Rusk: 6.8 miles south
- Directional boring in Jacksonville: 7.9 miles northwest
- Directional boring in Reklaw: 10.2 miles east
- Directional boring in Troup: 17.3 miles north
What boring work comes up in Gallatin near County Road 1508?
- Highway crossing: A bore beneath FM 768 needs a route profile that accounts for pavement, right of way and the required utility cover.
- Water service: A connection near Piney Grove Road can use a bore beneath a driveway or paved section to avoid an open cut.
- Fiber conduit: A route along County Road 1508 needs the electric and communication line owners confirmed before nearby utilities are crossed.
- Creek crossing: A route at Little Turnpike Creek needs a depth plan beneath the channel and a check for federal waterway jurisdiction.
- Replacement service: Work near 1st Avenue can pass beneath pavement while the crew exposes marked lines before drilling close to them.
- Drainage route: A bore near Dry Creek needs pits placed with the mapped wet and flood prone ground in mind.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
How do I get a quote for Gallatin work near Old Freight Road?
Start with an address or map pin; an exact point on Old Freight Road or near Little Turnpike Creek helps us see the route and access. On a Dry Creek crossing, we need the item going underground, pipe or conduit size, and footage before planning the bore. A sketch or plans help us check crossings and set up the bore plan.
Mobilization starts with Gallatin’s 340 road miles from Yukon. The mapped sandy clay loam and possible weathered bedrock can change drilling time, while an FM 768 crossing adds right of way and pavement planning. We also consider line size and length, utilities to expose, concrete or pavement, creek or drainage crossings, pits, excavator time and sand backfill. Near Turnpike Creek, we adjust the plan when high profile conditions or emergency work change the crossing.
Questions people ask about boring in Gallatin
Does Trinity Boring Solutions take directional boring jobs in Cherokee County near Gallatin?
Yes. We handle directional boring in Gallatin, 340 road miles from Yukon main office, and across Texas. Our own crews and satellite yards operated by drilling contractors we have vetted can staff a job near FM 768. For a Gallatin bore on Red Oak Road, we guide you from the first call through the bore log and coordinate with whichever crew you have on site.
For underground planning in Gallatin, Cherokee County, who runs the public water system, and where does its water come from?
Gallatin Water Supply Corporation runs the public water system, and its source is groundwater wells. Gallatin’s system serves 996 people through 332 service connections; we account for that scale when planning underground work. For a bore near Piney Grove Road, we confirm the water line location and depth before drilling close to it.
Which electric company owns lines at a Gallatin, Cherokee County job site?
The county electric providers reporting service are Oncor Electric Delivery Company, Cherokee County Electric Cooperative Association and Houston County Electric Cooperative. That does not identify the owner at every Gallatin address. Before a conduit bore near FM 22, we confirm the line owner and check conduit specifications with that owner.
Who controls Gallatin streets, and can a bore avoid cutting 1st Avenue?
Because Gallatin is an incorporated city, we confirm city street responsibility before boring on 1st Avenue. Directional boring can place a line beneath 1st Avenue without cutting the street surface, with pits set in the dirt on either side. The route still needs utility locations and access checked before the drill starts.
Do older Gallatin homes near County Road 1508 mean replacement bores?
They can mean replacement work, but the housing figures do not establish the age of any buried line. The American Community Survey 2019 to 2023 estimates give Gallatin a median housing year of 1970, with 36 percent of homes built before 1960. We pothole marked utilities before crossing them near County Road 1508.
Can groundwater or flooding affect bore pits near Little Turnpike Creek in Gallatin?
Yes. The USDA survey maps a seasonal water table within 60 inches in 51 percent of Gallatin and flood prone soils in 20 percent. Near Little Turnpike Creek, those conditions can put water in pits or affect a creek profile, so we plan pit placement and drainage for the site.
Can I reach Trinity after hours about an urgent Gallatin bore near 1st Avenue?
Yes. A person answers Trinity’s phone at (405) 409-7423 24 hours a day for urgent work near 1st Avenue or elsewhere in Gallatin. Emergency scope can affect crew planning and equipment needs, so have the location and the line involved ready when you call.
How early should I request a Texas811 ticket for Gallatin work on Piney Grove Road?
For a bore on Piney Grove Road, request a locate through Texas811 at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before work. If a start near County Road 1508 moves more than 14 days past the original notice, we submit a new request. Before we continue boring on Old Freight Road, we have worn or moved marks refreshed.
What affects the cost of a Gallatin directional bore near FM 768?
For a bore crossing FM 22, we base our price on the job scope and the installation details it includes. For FM 768 work, factors include bore length and size, the sandy clay loam or weathered bedrock, utilities to expose, pavement, and the highway crossing plan. Creek or drainage crossings, pits, excavator time, sand backfill, urgency and mobilization from Yukon also affect the work.
Where the Gallatin facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside Gallatin
- U.S. Census Bureau, TIGER/Line 2024: Gallatin boundary, roads, rail lines and streams
- U.S. Census Bureau, Vintage 2024 population estimates: Gallatin
- U.S. Census Bureau, American Community Survey 2019 to 2023: Gallatin housing units and year built
- Macrostrat geologic map compilation: map units under Gallatin
- U.S. EPA Safe Drinking Water Information System: public water systems serving Gallatin
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving Cherokee County
- U.S. Geological Survey, Elevation Point Query Service: Gallatin elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to Gallatin
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in Gallatin
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in Gallatin, Texas
Type the address of your job in Gallatin. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
County and State Pages for Gallatin
Same county: Shadybrook · Alto · Wells · Bullard · Cuney. All counties: Texas county list.
