trinityboringsolutions.com

Flower Mound Texas Directional Boring: Birome Soil, Timber Creek and Union Pacific

Quick Answer: What does the top five feet hold near Timber Creek? The USDA soil survey maps Birome soil across 23 percent of Flower Mound, with bedrock within 60 inches in 26 percent of mapped area. We take directional boring, also called horizontal directional drilling (HDD), work in Texas for routes beneath Timber Creek and roads such as FM 1171. Flower Mound is 193 road miles from our Yukon yard, and Interstate 35 is one of the crossings to plan around. Clay at about 40 inches can grip pipe, so staged reaming and fluid control matter.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Flower Mound bores at a glance

  • Incorporated city in Denton County and Tarrant County, Texas. Population 79,990 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 193 miles, about 3.9 hours of driving.
  • Ground: Birome soil is mapped on 23 percent of the area, with clay about 40 inches down.
  • Rock: bedrock is mapped within 60 inches on 26 percent of the area.
  • Highways inside the boundary: Interstate 35, US 377, FM 1171, FM 2499 and FM 3040. State permit office: TxDOT Dallas District.
  • Railroad track inside the boundary: Union Pacific and CPKC (Kansas City Southern), with 3 mapped street and rail crossings.
  • Named streams inside the boundary: Timber Creek, Denton Creek, Bakers Branch and Sharps Branch.
  • Public water: Town of Flower Mound, surface water bought from another system.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Which contractor handles directional boring near Interstate 35 in Flower Mound?

We take directional boring work in Flower Mound, an incorporated town spanning Denton County and a small part of Tarrant County. With Flower Mound’s population estimated at 79,990, we plan underground work with the town’s scale in mind. Our crews install water, sewer, gas, electric conduit and fiber along routes such as FM 1171 and Cross Timbers Road, where existing lines and pavement can shape the bore path.

Our main office is in Yukon, Oklahoma, and Flower Mound work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. We are a family business that has bored directionally since 1982. That experience across four decades helps us plan for the clay and bedrock patterns mapped around Flower Mound, from the first call through the bore log.

Aerial view of Trinity Boring Solutions crew and service van at a multifamily apartment underground utility jobsite in Oklahoma City
Our crew and service van at a multifamily underground utility job in Oklahoma City, seen from above. Photos on this page are from our jobs in Oklahoma and Texas.

What is Birome soil like to bore in Flower Mound?

The USDA soil survey maps Birome as the leading soil series, covering 23 percent of Flower Mound. Fine sandy loam is the most common surface texture at 39 percent, while the texture around 40 inches down shifts: clay accounts for 26 percent and sandy clay loam for 21 percent. Average clay content at that depth is 38 percent. For Flower Mound work, we treat mapped patterns as planning context, not substitutes for test borings. The clay can hold an open hole, then stick to a reamer or grip pipe as it swells.

USDA soil survey, inside the Flower Mound city limitsWhat is mapped
Soil series mappedBirome 23 percent, Gasil 13 percent, Navo 10 percent, Wilson 6 percent and Konsil 6 percent
Texture at the surfacefine sandy loam 39 percent, clay loam 21 percent and stony fine sandy loam 14 percent
Texture about 40 inches downclay 26 percent, bedrock 25 percent and sandy clay loam 21 percent
Engineering class about 40 inches downlean clay (CL) 34 percent and fat clay (CH) 32 percent
Average clay content about 40 inches down38 percent
Bedrock mapped within 60 inches26 percent of the area (2 percent hard rock, 24 percent weathered rock)
Seasonal water table within 60 inches2 percent of the area
Flood prone soils6 percent of the area
High corrosion risk for uncoated steel64 percent of the area

Bedrock is mapped within 60 inches across 26 percent of Flower Mound, with a typical mapped depth of 31 inches, so the bore plan may need to account for a soil to rock change. Seasonal water tables within 60 inches cover 2 percent; flood prone soils cover 6 percent, including areas to consider near Timber Creek. High steel corrosion risk is mapped across 64 percent, a concern for uncoated casing and tracer wire. The Woodbine Formation, mapped as sandstone and mudstone of Cenomanian age, adds another reason to confirm conditions along the route.

How do we plan a clay bore in Flower Mound when mapped patterns are not test borings?

Birome soil and the clay mapped around 40 inches in Flower Mound call for control of the hole, not just the drill path. We track depth and pitch as the bore advances near streets such as FM 2499.

  1. For Birome soil with clay mapped around 40 inches, we use thinner drilling fluid with polymer and open the hole in stages to limit sticky buildup.
  2. Where Flower Mound’s heavy clay is present, we watch fluid returns closely; pressure near FM 1171 pavement must not lift the surface.
  3. If the route approaches mapped bedrock, such as the Woodbine Formation, we adjust to slower drilling as the bit moves from soil into rock.
  4. At a Timber Creek crossing, we plan the bore depth below the channel and check whether the route needs review for federal jurisdiction.
Drilling fluid returns at the entry as the Vermeer D24x40 S3 drills a 385 foot sandstone rock bore in Guthrie, Oklahoma
Drilling fluid coming back to the entry pit as our Vermeer D24x40 drills a 385 foot bore in Guthrie, Oklahoma.

What does a bore have to cross near Timber Creek in Flower Mound?

Interstate 35, US 377, FM 1171, FM 2499, FM 3040 and FM 407 run within Flower Mound. Texas State Highway 121, Texas State Highway 114 and their business routes sit just outside the limits. Cross Timbers Road is the longest named street at 13.92 miles in town; Morriss Road covers 9.78 miles, and Long Prairie Road covers 9.15 miles. A route along these roads can involve pavement, driveways and existing utilities, so the bore alignment and access points matter.

CrossingTypeMapped extentWho has a say
Interstate 35Interstate1.3 roadway miles insideState highway office
US 377US highway2.7 roadway miles insideState highway office
FM 1171State highway13.9 roadway miles insideState highway office
FM 2499State highway11.2 roadway miles insideState highway office
FM 3040State highway6.8 roadway miles insideState highway office
FM 407State highway2.6 roadway miles insideState highway office
Texas State Highway 121Highway nearby0.6 miles outsideState highway office
Texas State Highway 121 BusinessHighway nearby0.9 miles outsideState highway office
Texas State Highway 114Highway nearby1 miles outsideState highway office
Texas State Highway 114 BusinessHighway nearby1.2 miles outsideState highway office
US 77Highway nearby1.3 miles outsideState highway office
Union PacificRailroad3.66 track miles insideThe railroad
CPKC (Kansas City Southern)Railroad0.25 track miles insideThe railroad
Timber CreekStream6.56 channel miles insideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

Union Pacific has 3.66 track miles in Flower Mound, while CPKC has 0.25. Public records map 3 street and rail crossings in town. Timber Creek runs 6.56 channel miles here, and Denton Creek runs 4.35; public records also map 27 street crossings of named streams. Grapevine Lake is inside town limits and covers 3,314 acres. A creek or lake route needs its own crossing review and bore plan.

Whose permission does a Flower Mound bore near Union Pacific need?

Flower Mound is incorporated, so its city streets belong to the town; work in the right of way of Interstate 35, US 377 or an FM road needs a TxDOT utility permit. The TxDOT Dallas District reviews the state highway application. The utility that owns the line files through TxDOT’s online RULIS system, while we prepare the bore plan and profile and work under the owner’s permit. For a crossing of Union Pacific or CPKC track, the railroad that owns that track must agree to the crossing. A Timber Creek or Grapevine Lake route is checked for U.S. Army Corps of Engineers jurisdiction during planning.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Whose lines are already buried in Denton County and Flower Mound?

The Town of Flower Mound public water system uses purchased surface water and serves 80,000 people through 26,581 service connections. Electric service reported in Denton County includes Oncor Electric Delivery Company, Texas-New Mexico Power, City of Denton, Cooke County Electric Cooperative Association, Denton County Electric Cooperative, Tri-County Electric Cooperative and Wise Electric Cooperative. We confirm the line owner for a Flower Mound address before laying out an electric conduit bore, since the county list does not identify the provider at every street.

Line ownerWhat it isSourceSize
Town of Flower MoundPublic water systemSurface water bought from another system26,581 connections, 80,000 people served
Oncor Electric Delivery Company, Texas-New Mexico Power, City of Denton, Cooke County Electric Cooperative Association, Denton County Electric Cooperative, Tri-County Electric Cooperative and Wise Electric CooperativeElectric utilities reporting service in Denton County and Tarrant CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

For underground planning, we treat Flower Mound’s 1997 median housing year as context, not a substitute for utility locating. Flower Mound’s housing estimates show 1 percent before 1960, 60 percent from 1960 to 1999, and 39 percent in 2000 or later, informing our underground planning. A route along Long Prairie Road could serve a newer connection or replace older pipe. Before drilling near a marked line, we hydrovac pothole to see its depth; paint alone shows its position.

Yellow polyethylene gas pipe pulled through a directional bore beside a commercial building
Yellow polyethylene gas pipe pulled through a directional bore beside a commercial building.

How far is Flower Mound from Double Oak and our Yukon yard?

Flower Mound covers 41.94 square miles, sits at an elevation of 626 feet and is mostly in Denton County, with 2 percent in Tarrant County. Its ZIP codes are 75022, 75028, 76262 and 76226. Double Oak is 1.7 miles north; Bartonville is 3.8 miles northwest, and Lantana is 3.9 miles north. Denton, the county seat and nearest larger city, is 12.5 miles north. The Yukon yard is 193 road miles away, a 3.9 hour drive, which affects mobilization for work on Cross Timbers Road or near Grapevine Lake.

Places near Flower Mound

What would we bore near Cross Timbers Road in Flower Mound?

  • Highway crossing: A route under Interstate 35 stays below the paved lanes, with the bore plan prepared for the utility owner’s TxDOT permit.
  • Water service: A connection near Flower Mound Road can tie into the Town of Flower Mound public water system, subject to the route and line location.
  • Fiber conduit: Cross Timbers Road offers a long street corridor, but marked utilities need exposure before the drill approaches them.
  • Creek crossing: A Timber Creek bore needs a planned depth beneath the channel and a jurisdiction check during planning.
  • Rail crossing: A route under the Union Pacific track needs an agreement with the railroad that owns it before the crossing proceeds.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What drives the price of a bore near Flower Mound Road?

For a Flower Mound quote, send the address or map pin, what is going in the ground, the pipe or conduit size and the footage; a sketch or plans help. A route on Flower Mound Road may have different access and crossing conditions from one near Timber Creek, so the path and the locations of marked utilities matter as much as the length.

Ground, crossings and logistics all shape the price for a Flower Mound bore. Birome soil and clay at about 40 inches can affect reaming and fluid needs. A route near Union Pacific track or Timber Creek adds crossing work to plan. Pavement, the number of utilities to expose, pits, excavator time and sand backfill also change the scope. Mobilization reflects the 193 road miles from Yukon, and high profile or emergency work can require additional planning.

Questions people ask about boring in Flower Mound

Does Trinity take directional boring work in Flower Mound and Denton County?

Yes. We take directional boring work across Texas, including Flower Mound in Denton County. Our main office is in Yukon, and Flower Mound projects are staffed by our own crews or crews from satellite yards operated by drilling partners we have vetted. Across Flower Mound, we coordinate with Trinity through the bore log, regardless of which crew is on site.

Who approves a bore beneath Interstate 35 in Flower Mound?

For work in Interstate 35 right of way, the utility owner applies for the TxDOT utility permit through RULIS. We account for TxDOT Dallas District review when planning Flower Mound work. We prepare the bore plan and profile and work under the permit issued to the owner. The same state process applies to the named FM roads in Flower Mound.

What do we need to plan for a Flower Mound bore beneath Union Pacific track?

A crossing of Union Pacific track needs an agreement from Union Pacific, the railroad that owns the line. Its agreement covers the crossing conditions, including casing, depth and flagging. Flower Mound also has 0.25 track miles owned by CPKC, so the track owner must be identified for that route.

Can a utility line be bored beneath Timber Creek in Flower Mound?

Yes, a planned bore can pass beneath Timber Creek. The route needs a suitable depth below the channel, and creek crossings are checked during planning for U.S. Army Corps of Engineers jurisdiction. Timber Creek runs 6.56 channel miles in Flower Mound, so the crossing location and access points shape the plan.

Who runs Flower Mound’s public water system, and where does its water come from when we plan nearby underground work?

The Town of Flower Mound owns and operates the public water system, which uses purchased surface water. Public records list 26,581 service connections serving 80,000 people. For a bore near Flower Mound Road, the actual water line location still needs to be confirmed along the proposed route.

Which electric company serves my Flower Mound address in Denton County?

The county reports service from Oncor Electric Delivery Company, Texas-New Mexico Power, City of Denton and several electric cooperatives, including Denton County Electric Cooperative. That list does not establish which provider serves a particular Flower Mound address. Confirm the line owner before planning conduit near a street such as Long Prairie Road.

Can I reach Trinity after hours about an urgent bore on Long Prairie Road in Flower Mound?

Yes. For Flower Mound work, we can reach a person at Trinity’s phone 24 hours a day at (405) 409-7423. For an urgent issue near Long Prairie Road, share the location and what line or work is involved so we can understand the situation and discuss the next step.

How early should I request locates for a Flower Mound bore along Cross Timbers Road?

The person arranging a bore along Cross Timbers Road must contact Texas811 at least 48 hours before excavation begins, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days ahead. If the start moves beyond 14 days after the original notice, make a new request. On Flower Mound work, we refresh worn or moved marks through Texas811 before work continues.

What affects the cost of directional boring near Interstate 35 in Flower Mound?

The job details determine the price, not a single standard rate. Length, pipe size, Birome soil and any rock affect drilling; pavement, Interstate 35 or Timber Creek crossings and utilities to expose add work. Pits, excavator time, backfill and mobilization from Yukon also matter, as do high profile or emergency conditions.

Where the Flower Mound facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Flower Mound

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Flower Mound, Texas

Type the address of your job in Flower Mound. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Flower Mound

Same county: Lewisville · Frisco · Carrollton · Little Elm · The Colony · Dallas · Corinth · Fort Worth · Highland Village · Roanoke · Northlake · Providence Village. All counties: Texas county list.