trinityboringsolutions.com

Bonham Texas Directional Boring: Soil, US 82 and Powder Creek

Quick Answer: Bonham soil is mostly silt loam near the surface, then clay below; sticky ground can grip a pipe. We take directional boring, also called horizontal directional drilling (HDD), for Bonham crossings such as US 82. Bonham is 205 road miles from our Yukon, Oklahoma main office, so mobilization matters for a Center Street bore. The USDA soil survey maps clay at 40 inches across 53 percent of Bonham, so staged reaming and controlled fluid help keep the hole steady.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Bonham bores at a glance

  • County seat of Fannin County, Texas. Population 11,115 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 205 miles, about 4.1 hours of driving.
  • Ground: Bonham soil is mapped on 34 percent of the area, with clay about 40 inches down.
  • Rock: bedrock is mapped within 60 inches on 36 percent of the area.
  • Highways inside the boundary: US 82, Texas State Highway 121, Texas State Highway 78, Texas State Highway 56 and Loop 205. State permit office: TxDOT Paris District.
  • Railroad track inside the boundary: Texas Northeastern Railroad (line shown as out of service), with 6 mapped street and rail crossings.
  • Named streams inside the boundary: Powder Creek, Pig Branch, Timber Creek and Bois D Arc Creek.
  • Public water: City of Bonham, surface water bought from another system.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Does anyone handle directional boring near Center Street in Bonham?

We take directional boring work in Bonham, the incorporated county seat of Fannin County. Census Bureau Vintage 2024 puts Bonham at 11,115, a population figure we keep in mind when planning underground work. Along Center Street, Main Street or US 82, our crews can install water, sewer, gas, electric conduit and fiber lines by boring beneath pavement and other surface features.

Our main office is in Yukon, Oklahoma, and Bonham work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our family business started in 1965, and boring has been part of our work since 1982. For routes near US 82 or Powder Creek, our equipment handles 3/4 inch service lines up to 48 inch casing and bores from 10 feet to 5,000 feet.

Directional drill rig and crew working on a street beside a brick commercial building
Our drill and crew set up on a street beside a brick commercial building. Photos on this page are from our jobs in Oklahoma and Texas.

How does Bonham soil affect a bore in Bonham?

The USDA soil survey maps Bonham soil across 34 percent of the city, Normangee across 24 percent and Crockett across 12 percent. Surface texture is chiefly silt loam, mapped across 52 percent, with clay loam across 24 percent. At about 40 inches below the surface, the survey maps clay in 53 percent of the area and silty clay in 34 percent. Heavy clay is mapped across 88 percent at that depth. These are soil patterns, not test borings. Sticky clay can gather on a reamer and grip pipe, so the bore plan needs controlled fluid and staged reaming.

USDA soil survey, inside the Bonham city limitsWhat is mapped
Soil series mappedBonham 34 percent, Normangee 24 percent, Crockett 12 percent, Wilson 12 percent and Hopco 11 percent
Texture at the surfacesilt loam 52 percent, clay loam 24 percent and loam 13 percent
Texture about 40 inches downclay 53 percent, silty clay 34 percent and silty clay loam 13 percent
Engineering class about 40 inches downfat clay (CH) 87 percent and lean clay (CL) 13 percent
Average clay content about 40 inches down41 percent
Bedrock mapped within 60 inches36 percent of the area (0 percent hard rock, 36 percent weathered rock)
Seasonal water table within 60 inches25 percent of the area
Flood prone soils13 percent of the area
High corrosion risk for uncoated steel66 percent of the area

Weathered bedrock is mapped within 60 inches in 36 percent of Bonham, with a typical depth of 53 inches; the Bonham formation, a Coniacian marlstone and claystone unit, adds a reason to watch for changing ground. Seasonal water table is mapped within 60 inches in 25 percent, and flood prone soils cover 13 percent, so pits and Powder Creek routes need wet ground considered. Across Bonham, we account for mapped high steel corrosion risk covering 66 percent when planning buried crossings. The line owner should weigh casing and tracer wire materials; HDPE avoids that soil corrosion concern.

How do we run a bore through clay in Bonham?

Bonham clay can stick to the reamer and tighten around pipe. We plan the cut, fluid and pull around that ground, while keeping Powder Creek banks, Center Street pavement and marked utilities in view.

  1. Because Bonham clay can cling to the reamer, we use thinner fluid with polymer and ream in stages before pulling pipe the same day the hole is opened.
  2. Silt loam mapped in Bonham can wash out under excess fluid, so a route beneath Center Street pavement calls for controlled pressure and careful steering.
  3. With seasonal water table mapped in 25 percent of Bonham within 60 inches, we keep pits small and pump water when a Main Street route gets wet.
  4. For every marked utility on a Bonham bore path, we hydrovac pothole before drilling near it, then track and log the drill head’s depth and pitch.
Vermeer D24x40 S3 Navigator and water truck at the entry of a 385 foot sandstone rock bore above the wetland in Guthrie, Oklahoma
Our Vermeer D24x40 and water truck at the entry of a 385 foot sandstone rock bore in Guthrie, Oklahoma.

What can a new line cross near US 82 in Bonham?

US 82 has 6.2 mapped roadway miles inside Bonham. Texas State Highway 121 has 5.8, Texas State Highway 78 has 3.6, Texas State Highway 56 has 3.0, and Loop 205 has 1.3. Center Street is the longest named street at 3.61 miles, followed by Sam Rayburn Drive at 3.02 and Main Street at 2.43. A route on these roads may need to pass beneath pavement or driveways, so the crossing location and right of way affect the bore plan.

CrossingTypeMapped extentWho has a say
US 82US highway6.2 roadway miles insideState highway office
Texas State Highway 121State highway5.8 roadway miles insideState highway office
Texas State Highway 78State highway3.6 roadway miles insideState highway office
Texas State Highway 56State highway3 roadway miles insideState highway office
Loop 205State highway1.3 roadway miles insideState highway office
FM 87State highway0.9 roadway miles insideState highway office
Texas Northeastern Railroad (line shown as out of service)Railroad2.67 track miles insideThe railroad
Dallas, Garland and Northeastern Railroad (line shown as out of service)Railroad nearby0.3 miles outsideThe railroad
Powder CreekStream5.57 channel miles insideChecked for Corps of Engineers jurisdiction
Pig BranchStream2.83 channel miles insideChecked for Corps of Engineers jurisdiction
Timber CreekStream0.5 channel miles insideChecked for Corps of Engineers jurisdiction
Bois D Arc CreekStream0.16 channel miles insideChecked for Corps of Engineers jurisdiction
Sloans CreekStream nearby0.3 miles outsideChecked for Corps of Engineers jurisdiction
Little Timber CreekStream nearby0.7 miles outsideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

The Texas Northeastern Railroad line, shown as out of service, has 2.67 track miles in Bonham, and 6 street and rail crossings are mapped. A crossing still needs an agreement from the railroad that owns the track. Powder Creek runs 5.57 channel miles in the city, while Pig Branch runs 2.83; 22 street crossings of named streams are mapped. A Powder Creek route needs depth planning below the channel and a jurisdiction check. For Bonham bore paths, we account for no lakes or ponds mapped within one mile during route review.

Do I need a permit for a bore in Fannin County near Bonham?

Bonham is incorporated, so its city streets belong to the city; state highway right of way is handled separately. For work on US 82 or another state road, the line owner, not the driller, submits the utility permit through TxDOT’s RULIS system. We prepare the bore plan and profile for that filing, which the TxDOT Paris District reviews. TxDOT cover rules call for 60 inches at electric and communication crossings, 60 inches for water crossings and pressurized sewer crossings, with other depths for lines running along the right of way. For a Bonham bore, we follow the permit if it sets a different depth. A Texas Northeastern Railroad crossing needs an agreement with the track owner, and Powder Creek is checked for U.S. Army Corps of Engineers jurisdiction during planning.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Whose lines may be near the City of Bonham water system?

The City of Bonham public water system uses purchased surface water and reports 5,050 service connections serving 10,746 people. That system makes a water route near Center Street or Main Street a line locating and exposure job before drilling. Fannin County electric service is reported by Oncor Electric Delivery Company, Texas-New Mexico Power, Fannin County Electric Cooperative, Farmers Electric Cooperative, Grayson-Collin Electric Cooperative and Lamar County Electric Cooperative. We confirm the line owner for a specific Bonham address before planning an electric conduit bore.

Line ownerWhat it isSourceSize
City of BonhamPublic water systemSurface water bought from another system5,050 connections, 10,746 people served
Oncor Electric Delivery Company, Texas-New Mexico Power, Fannin County Electric Cooperative, Farmers Electric Cooperative, Grayson-Collin Electric Cooperative and Lamar County Electric Cooperative AssociationElectric utilities reporting service in Fannin CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

In Bonham, the 2019 to 2023 American Community Survey places the median housing year built at 1976. It estimates 29 percent of housing units were built before 1960, 55 percent from 1960 to 1999 and 16 percent in 2000 or later. A Center Street project may involve an older line being replaced or a new service, so we hydrovac pothole every marked utility on the bore path before drilling near it. Paint shows a line’s position, not its depth.

Hydrovac truck and boring equipment staged beside an airport taxiway for utility daylighting in Oklahoma City
Our hydrovac truck and boring equipment beside an airport taxiway in Oklahoma City, set up to expose a utility crossing.

Where does Trinity serve around Bonham and Ravenna?

Bonham is the Fannin County seat in Texas, at an elevation of 612 feet, and covers 9.83 square miles. The city’s ZIP code is 75418. Ector is 4.8 miles west, Ravenna is 6.4 miles northwest and Dodd City is 6.6 miles east. Sherman, the nearest larger city listed, is 25.3 miles west. From our Yukon, Oklahoma main office, Bonham is 205 road miles away and a 4.1 hour drive. That distance is part of planning mobilization for a job near US 82 or Powder Creek.

Places near Bonham

Which jobs call for a bore near Main Street in Bonham?

  • Highway crossing: A line under US 82 avoids cutting the pavement, with the bore plan shaped by the highway right of way.
  • Water service: A new route near Center Street can connect toward the City of Bonham system after existing marked lines are exposed.
  • Fiber drop: A fiber bore beside Main Street can pass beneath driveways and sidewalks without opening a trench across them.
  • Creek crossing: A Powder Creek bore needs a planned path below the channel and a check for U.S. Army Corps of Engineers jurisdiction.
  • Rail crossing: A route beneath the Texas Northeastern Railroad track requires an agreement with the railroad that owns it.
  • Utility replacement: Potholing along Sam Rayburn Drive helps locate existing lines before a replacement pipe is drilled through Bonham clay.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What do you need to price a Bonham bore near Powder Creek?

For a Powder Creek or US 82 quote, send the address or map pin, what is going in the ground, the pipe or conduit size and the footage; a sketch or plans help. Those details let us compare the proposed route with the crossing, access and ground conditions that shape a Bonham bore.

In Bonham, soil and ground conditions matter first: the survey maps heavy clay across 88 percent at 40 inches, where sticky cuttings can affect reaming and pipe pull. Next, the number of utilities to expose, pavement on US 82, and creek or drainage crossings such as Powder Creek affect the work. Pit size, excavator time and sand backfill also count. The 205 road miles from Yukon affect mobilization, and high profile or emergency work can add planning demands.

Questions people ask about boring in Bonham

Does Trinity Boring Solutions take directional boring jobs in Bonham and Fannin County?

Yes. We take work across Texas, including jobs in Bonham and Fannin County. Our own crews and crews from satellite yards run by partner drilling contractors we have vetted can staff the work. For Bonham, we stay involved from first call through bore log, regardless of which crew is on site.

Who approves a bore under US 82 in Bonham, and what approval do we need before starting?

The line owner submits the utility permit for US 82 right of way through TxDOT’s RULIS system; the TxDOT Paris District reviews it. We prepare the bore plan and profile for the owner’s application and work under the permit issued to that owner.

What does a bore under the Texas Northeastern Railroad (line shown as out of service) in Bonham need?

It needs an agreement from the railroad that owns the track, even though the Texas Northeastern Railroad line is shown as out of service. That agreement sets crossing conditions such as casing, depth and flagging. The mapped line has 2.67 track miles in Bonham.

Can a line be bored under Powder Creek in Bonham?

A bore can be planned beneath Powder Creek, with its route set to stay under the channel. Before a Bonham crossing advances, we check whether the route falls under US Army Corps of Engineers jurisdiction. Powder Creek runs 5.57 channel miles in Bonham, so the specific crossing location matters.

Who runs Bonham’s public water system, and where does its purchased surface water come from for bore planning?

The City of Bonham owns the public water system, so we account for purchased surface water during underground planning. It reports 5,050 service connections and serves 10,746 people. For a bore near Center Street, the water system’s lines must be located and exposed along the planned route.

Which Fannin County electric company serves a Bonham address, and who confirms conduit specs?

Fannin County electric service is reported by several utilities, including Oncor Electric Delivery Company and Fannin County Electric Cooperative. The specific line owner must be confirmed for the Bonham address; we coordinate conduit details with that owner before planning the bore.

How early should I call Texas811 for a Bonham bore near Center Street?

Make the Texas811 locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days ahead. If the Bonham start slips more than 14 days past the original notice, we make a new request before rescheduling the crossing. Refresh worn or moved marks through Texas811 before work continues near Center Street.

Does the distance from Sherman change a Bonham job from the Yukon office?

Sherman is 25.3 miles west of Bonham, while Bonham is 205 road miles and a 4.1 hour drive from our Yukon, Oklahoma main office. The Yukon distance can affect mobilization planning for a Center Street or Powder Creek job, alongside the bore route and site conditions.

What affects the price of a directional bore under US 82 in Bonham?

The price depends on the job details, not just the footage. Bonham’s heavy clay can affect reaming, while a US 82 crossing may involve pavement and highway right of way planning. Utilities to expose, pipe or conduit size, creek crossings, pits, excavator time, backfill and mobilization from Yukon also shape the work.

Where the Bonham facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Bonham

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Bonham, Texas

Type the address of your job in Bonham. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Bonham

Same county: Leonard · Honey Grove · Trenton · Ladonia · Windom · Pecan Gap. All counties: Texas county list.