Dodd City Texas Directional Boring: Fairlie Clay, Highway 56 And Onstott Branch
Quick Answer: The City of Dodd City water system uses groundwater wells, and Fannin County electric service is reported by several utilities, so we confirm each line owner before planning a bore. We do directional boring, also called horizontal directional drilling (HDD), for routes such as crossings of Texas State Highway 56. Dodd City is 213 road miles from our Yukon, Oklahoma main office, with Main Street among its longer roads. Fairlie soil and heavy clay can cling to the reamer and grip pipe, so the drilling plan matters.
Dodd City bores at a glance
- Incorporated city in Fannin County, Texas. Population 402 (Census Bureau 2024 estimate).
- Road distance from our Yukon, Oklahoma main office: 213 miles, about 4.2 hours of driving.
- Ground: Fairlie soil is mapped on 66 percent of the area, with clay about 40 inches down.
- Rock: bedrock is mapped within 60 inches on 94 percent of the area.
- Highways inside the boundary: Texas State Highway 56 and FM 2077. State permit office: TxDOT Paris District.
- Railroad track inside the boundary: Texas Northeastern Railroad (line shown as out of service), with 5 mapped street and rail crossings.
- Named streams inside the boundary: Onstott Branch.
- Public water: City of Dodd City, groundwater wells.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Who does directional boring on Dodd City Main Street?
We take directional boring work in Dodd City, Fannin County, where the Census Bureau Vintage 2024 estimate puts the population at 402. Along Main Street or 3rd Street, our crews can install water, sewer, gas, electric conduit or fiber by bore to avoid cutting the surface. We confirm the line owner before planning an electric conduit route.
Our main office is in Yukon, Oklahoma, and Dodd City work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. A 3/4 inch service line can serve a Main Street connection; 48 inch casing is the largest size in our range for a much larger crossing. Our family business started in 1965, and we have done directional boring since 1982 for work planned around Dodd City.

What kind of ground does Dodd City Fairlie soil indicate?
The USDA soil survey maps Fairlie soil across 66 percent of Dodd City, with Howe, Whitewright and Frioton series also present. Clay is the surface texture across 67 percent of the mapped area, and at about 40 inches the survey maps clay in 67 percent of the area and bedrock in 28 percent. Average clay content at that depth is 49 percent. We treat these Dodd City mapped patterns as planning references, not test borings, when considering underground work. The heavy clay can stick to a reamer, swell when wet and tighten around pipe.
| USDA soil survey, inside the Dodd City city limits | What is mapped |
|---|---|
| Soil series mapped | Fairlie 66 percent, Howe 22 percent, Whitewright 5 percent and Frioton 5 percent |
| Texture at the surface | clay 67 percent, clay loam 22 percent and silty clay loam 11 percent |
| Texture about 40 inches down | clay 67 percent, bedrock 28 percent and silty clay 5 percent |
| Engineering class about 40 inches down | fat clay (CH) 67 percent and lean clay (CL) 5 percent |
| Average clay content about 40 inches down | 49 percent |
| Bedrock mapped within 60 inches | 94 percent of the area (0 percent hard rock, 94 percent weathered rock) |
| Seasonal water table within 60 inches | 0 percent of the area |
| Flood prone soils | 5 percent of the area |
| High corrosion risk for uncoated steel | 100 percent of the area |
The soil survey maps weathered bedrock within 60 inches across 94 percent of Dodd City, with typical bedrock depth at 45 inches; hard bedrock is not mapped at that depth. The map includes Cenozoic silty clay decomposition residuum and Late Cretaceous Gober Chalk and Roxton Limestone. Seasonal water tables are not mapped within 60 inches, while flood prone soils cover 5 percent. High steel corrosion risk is mapped across the area, so the line owner should consider casing and tracer wire materials. Chalk or weathered rock can slow a bore.
How do we drill Dodd City clay?
Fairlie soil and the mapped clay make fluid control and reamer loading central to a bore in Dodd City. We set the approach to the route, expose marked utilities and track the drill head as it advances.
- Fairlie clay can ball on a reamer, so we use a fluid mix suited to the ground, open the hole in stages and plan the pipe pull without delay.
- Because heavy clay is mapped across much of Dodd City, we watch fluid returns closely to avoid lifting pavement along Main Street.
- With weathered bedrock mapped at typical depth of 45 inches, we slow the advance and track depth and pitch as the route approaches that layer.
- Before drilling near a marked line on Sam Rayburn Road, we hydrovac expose it; surface paint shows position, not depth.

What is in the way of a new line in Dodd City near Texas State Highway 56?
Texas State Highway 56 runs through Dodd City, as does FM 2077; US 82 lies 1.4 miles outside the limits. A route across either state highway needs a bore plan that accounts for the road surface and right of way. Main Street is the longest named street at 1.08 miles, followed by 3rd Street at 0.96 miles and Sam Rayburn Road at 0.82 miles. Those streets give a coordinator specific routes to check for utilities and pavement before setting pits.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| Texas State Highway 56 | State highway | 1.9 roadway miles inside | State highway office |
| FM 2077 | State highway | 0.9 roadway miles inside | State highway office |
| US 82 | Highway nearby | 1.4 miles outside | State highway office |
| Texas Northeastern Railroad (line shown as out of service) | Railroad | 1.27 track miles inside | The railroad |
| Onstott Branch | Stream | 0.52 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Long Branch | Stream nearby | Along the boundary | Checked for Corps of Engineers jurisdiction |
| Burns Branch | Stream nearby | 0.6 miles outside | Checked for Corps of Engineers jurisdiction |
The Texas Northeastern Railroad (line shown as out of service) has 1.27 track miles in Dodd City, and public mapping shows five street and rail crossings. The line status does not remove the need to plan a track crossing with its owner. Onstott Branch runs 0.52 channel miles inside town, but no mapped street crossing of a named stream is recorded. Long Branch touches or runs along the boundary, and Burns Branch is 0.6 miles outside it.
Who approves a Dodd City bore in Fannin County?
For a utility crossing Texas State Highway 56 or FM 2077, cover sets the bore depth: electric and communication lines need 60 inches below the lowest crossed grade, water needs 60 inches, and pressurized sewer needs 60 inches. Along highway right of way, electric and communication lines need 48 inches of cover and water needs 36 inches. The line owner applies through TxDOT RULIS, with the TxDOT Paris District reviewing it; we prepare the bore plan and profile for that application. For a Dodd City crossing beneath existing highway pavement, we follow TxDOT rules calling for boring or tunneling. Because Dodd City is incorporated, we account for its city streets as belonging to the city when planning boring work. A crossing of the Texas Northeastern Railroad needs an agreement with its owner. Onstott Branch is checked during planning for federal waterway jurisdiction.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
Who owns the lines near the City of Dodd City water system, so we can account for ownership as we plan underground work?
The City of Dodd City public water system uses groundwater wells and reports 243 service connections serving 729 people. That makes the water line owner a key call before a bore near Main Street or another service route. Fannin County electric service is reported by Oncor Electric Delivery Company, Texas-New Mexico Power, Fannin County Electric Cooperative, Farmers Electric Cooperative, Grayson-Collin Electric Cooperative and Lamar County Electric Cooperative Association. We confirm the electric line owner for the route rather than assume one provider serves every address.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| City of Dodd City | Public water system | Groundwater wells | 243 connections, 729 people served |
| Oncor Electric Delivery Company, Texas-New Mexico Power, Fannin County Electric Cooperative, Farmers Electric Cooperative, Grayson-Collin Electric Cooperative and Lamar County Electric Cooperative Association | Electric utilities reporting service in Fannin County | EIA Form 861 | Confirm the line owner by address |
We consider the American Community Survey 2019 to 2023 five year estimate putting Dodd City’s median housing year at 1982 when planning underground work. For Dodd City underground planning, we keep the housing age mix in view: 16 percent before 1960, 75 percent from 1960 to 1999 and 9 percent in 2000 or later. A Main Street project could involve replacement of older service or a newer connection, so we hydrovac expose marked utilities before the drill approaches. Paint shows a line’s position, not its depth.

Where is Dodd City in relation to Windom?
Dodd City is in Fannin County, at an elevation of 672 feet, and covers 1.77 square miles. Its ZIP code is 75438. Windom is 4.5 miles east; Bonham, the county seat and nearest larger city, is 6.6 miles west. Honey Grove is 9.6 miles east, Bailey is 11.1 miles southwest and Ector is 11.4 miles west. From our Yukon, Oklahoma main office, the drive is 213 road miles and 4.2 hours. That distance is part of planning a mobilization to a Sam Rayburn Road or Texas State Highway 56 job.
Places near Dodd City
- Directional boring in Windom: 4.5 miles east
- Directional boring in Bonham: 6.6 miles west
- Directional boring in Honey Grove: 9.6 miles east
- Directional boring in Bailey: 11.1 miles southwest
- Directional boring in Ector: 11.4 miles west
Which jobs call for a bore in Dodd City near Sam Rayburn Road?
- Highway crossing: A water or conduit bore beneath Texas State Highway 56 needs a route and profile that account for required cover and the highway surface.
- Water service: A connection near Main Street can tie into a route served by the City of Dodd City groundwater well system.
- Fiber route: A fiber bore along Sam Rayburn Road can avoid opening the street while the crew checks for marked utilities.
- Rail crossing: A planned bore beneath the Texas Northeastern Railroad needs an agreement with the track owner before crossing details are set.
- Creek crossing: A route near Onstott Branch needs depth planning beneath the channel and a jurisdiction check during planning.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
What do you need to quote a Dodd City bore near Onstott Branch?
For a Dodd City quote, send the address or map pin, what is going in the ground, the pipe or conduit size and the footage; a sketch or plans help show how the route relates to Onstott Branch. That detail lets us assess the route and the access needed for pits before we plan the bore.
The Fairlie clay is the first cost driver because sticky ground can load a reamer and require staged passes. Length and pipe size shape the equipment and bore plan, while marked utilities to expose and pavement on Main Street or Texas State Highway 56 add coordination. A route near the Texas Northeastern Railroad or Onstott Branch brings crossing details into the scope. Pit work, excavator time and mobilization from Yukon also affect the job.
Questions people ask about boring in Dodd City
Does Trinity take directional boring work in Dodd City and Fannin County, and who staffs it?
Yes. We take work in Dodd City and staff it with our own crews or crews from satellite yards run by drilling contractors we have vetted. The Yukon main office remains the point of contact from the first call through the bore log, whether the route is near Main Street or elsewhere in Fannin County.
Does Fairlie soil in Dodd City create a corrosion concern, and what pipe can be used?
The USDA soil survey maps high steel corrosion risk across Dodd City, including areas mapped as Fairlie soil. The line owner decides on coatings or materials for steel casing and tracer wire. HDPE is not subject to that soil corrosion concern, so material choice should be settled with the owner before planning a Main Street bore.
What ground does a Dodd City bore pass through in Fairlie soil?
Fairlie is mapped across 66 percent of Dodd City, and the USDA soil survey shows clay in 67 percent of the area at about 40 inches. Average clay content at that depth is 49 percent. Clay can cling to the reamer and grip pipe, so a bore near Sam Rayburn Road needs fluid and reaming choices suited to sticky ground.
Will a Dodd City bore encounter rock, and how much bedrock is mapped within five feet?
The USDA soil survey maps weathered bedrock within 60 inches across 94 percent of Dodd City, with typical depth at 45 inches. We read Dodd City mapping as showing no hard bedrock within that depth, a consideration when planning a boring profile. The map includes Gober Chalk and Roxton Limestone, so a route near Texas State Highway 56 may slow as it reaches weathered rock.
Who approves a Dodd City bore under Texas State Highway 56?
TxDOT reviews the highway utility permit through its Paris District. The utility owner files in RULIS, while we prepare the bore plan and profile for the filing. For a crossing of Texas State Highway 56, required cover depends on the line type, and the permit may set a different depth.
What does a Dodd City bore under Texas Northeastern Railroad (line shown as out of service) need?
A crossing needs an agreement with the Texas Northeastern Railroad, which has 1.27 track miles mapped in Dodd City. The railroad sets crossing conditions such as casing, depth and flagging. The line is shown as out of service, but the track owner still needs to be part of crossing planning.
Does Trinity cover Windom and rural sites outside Dodd City?
Yes. We take work in Texas beyond Dodd City, including routes toward Windom, 4.5 miles east, and rural sites outside town. The Yukon main office is 213 road miles away, so distance and access affect mobilization for a Sam Rayburn Road area project.
How early should I request a Dodd City locate for a bore along Main Street?
The person arranging the bore should describe the path along Main Street when requesting a Texas811 locate. Texas law requires the request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before. If the start slips more than 14 days past the notice, submit a new request; worn or moved marks must be refreshed through Texas811 before work continues.
What affects the cost of directional boring in Dodd City near Texas State Highway 56?
The route and job details drive the price. Fairlie clay can affect reaming, while a Texas State Highway 56 crossing adds permit and cover planning. Length, pipe size, utilities to expose, pavement, creek or railroad crossings, pits and equipment time all matter. Mobilization from the Yukon office is another factor for this 213 road mile trip.
Where the Dodd City facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside Dodd City
- U.S. Census Bureau, TIGER/Line 2024: Dodd City boundary, roads, rail lines and streams
- U.S. Census Bureau, Vintage 2024 population estimates: Dodd City
- U.S. Census Bureau, American Community Survey 2019 to 2023: Dodd City housing units and year built
- Macrostrat geologic map compilation: map units under Dodd City
- U.S. EPA Safe Drinking Water Information System: public water systems serving Dodd City
- U.S. Department of Transportation, North American Rail Network: track owners in Fannin County
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving Fannin County
- U.S. Geological Survey, Elevation Point Query Service: Dodd City elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to Dodd City
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in Dodd City
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in Dodd City, Texas
Type the address of your job in Dodd City. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
