trinityboringsolutions.com

Quail Texas Directional Boring: Miles Loamy Fine Sand, Texas State Highway 203, FM 1547

Quick Answer: Texas State Highway 203 and FM 1547 are routes Trinity Boring Solutions can cross with directional boring, also called horizontal directional drilling (HDD), in Quail, Texas. Quail has 10.37 public road centerline miles, and our Yukon main office is 197 road miles away. The USDA maps Miles loamy fine sand across most of Quail, so loose upper material can need staged reaming to keep the bore open. At about 40 inches, sandy clay loam is common in the mapped profile, where clay can support the hole but may grip pipe.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Quail bores at a glance

  • Unincorporated community in Collingsworth County, Texas. Population 17 (2020 Census count).
  • Road distance from our Yukon, Oklahoma main office: 197 miles, about 3.8 hours of driving.
  • Ground: Miles soil is mapped on 80 percent of the area, with sandy clay loam about 40 inches down.
  • Rock: no bedrock is mapped in the top 60 inches.
  • Highways inside the boundary: Texas State Highway 203 and FM 1547. State permit office: TxDOT Childress District.
  • Railroad track inside the boundary: none mapped.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who can I call for boring under Texas State Highway 203 in Quail?

Quail is an unincorporated community in Collingsworth County, where the 2020 Census counted 17 residents; the Census Bureau does not publish yearly estimates for places this small. We can bore water or sewer service beneath FM 1547, or place gas, electric conduit and fiber along routes such as Texas State Highway 203, with the alignment set from the actual address.

Our main office is in Yukon, Oklahoma, and Quail work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Since 1982, our directional boring experience has passed four decades, useful context for Quail’s mapped loamy fine sand over sandy clay loam, where the ground profile can change along a bore.

Aerial view of a bore pit with drill rig and conduit alongside a directional drill rig and conduit on a concrete lot
Our crew at a bore pit beside the directional drill on a conduit job, seen from above. Photos on this page are from our jobs in Oklahoma and Texas.

What ground does Quail’s Miles soil map show?

The USDA soil survey maps Miles soil across 80 percent of Quail and Springer soil across 18 percent. Loamy fine sand is the surface texture across 98 percent of the mapped area. At about 40 inches below the surface, sandy clay loam is mapped across 82 percent, with an average clay content of 26 percent at that depth. For Quail, we treat mapped Miles and Springer soil patterns as planning information, not test borings. The sandy surface can loosen around the drill, while the deeper clay can hold the bore but grip the pipe.

USDA soil survey, inside the Quail mapped community boundaryWhat is mapped
Soil series mappedMiles 80 percent and Springer 18 percent
Texture at the surfaceloamy fine sand 98 percent
Texture about 40 inches downsandy clay loam 82 percent and fine sandy loam 18 percent
Engineering class about 40 inches downlean clay (CL) 82 percent, clayey sand (SC) 14 percent and silty clayey sand (SC SM) 4 percent
Average clay content about 40 inches down26 percent
Bedrock mapped within 60 inchesNone mapped
Seasonal water table within 60 inches0 percent of the area
Flood prone soils0 percent of the area
High corrosion risk for uncoated steel0 percent of the area

We read Quail’s loamy fine sand surface separately from the map finding: bedrock is not mapped in the top five feet, though deeper rock remains possible. The USDA soil survey maps no seasonal water table within 60 inches, no flood prone soils and no high steel corrosion risk. A Holocene sand sheet deposit is mapped here, alongside Permian Guadalupian sedimentary rock; the sand can cave behind the bit, so staged reaming and drilling fluid help keep the hole open.

What does it take to bore Quail’s sandy clay loam?

Quail’s loamy fine sand at the surface and sandy clay loam deeper down call for a bore plan that accounts for both loose ground and clay. We track the drill head and adjust the reaming approach to the mapped conditions along the route.

  1. In Quail’s loamy fine sand, we use drilling fluid and staged reaming to help keep the hole from collapsing behind the bit.
  2. Where the Miles soil map shows sandy clay loam at about 40 inches, we adjust fluid and reaming so sticky ground does not grip the pipe.
  3. For a bore near Texas State Highway 203, we track the drill head from the surface and log depth and pitch as it advances.
  4. Before a bore along FM 1547 gets near marked utilities, we expose each one with hydrovac because surface paint does not show its depth.
Bore pit with a 6 inch PVC sleeve, traffic cones and blue water line flags at NE 24th Street in Oklahoma City
A bore pit with a 6 inch PVC sleeve, traffic cones and blue water line flags at NE 24th Street in Oklahoma City.

Which roads can a Quail bore cross, including Texas State Highway 203?

Texas State Highway 203 has 4.2 mapped roadway miles inside Quail, and FM 1547 has 1.0. Those are the two named highway routes identified within the mapped community boundary. Public road centerlines total 10.37 miles, but the mapped street data lists no named streets. For a crossing, the route and bore entry points need to be located from the job address rather than a named local street.

CrossingTypeMapped extentWho has a say
Texas State Highway 203State highway4.2 roadway miles insideState highway office
FM 1547State highway1 roadway miles insideState highway office
Swipe the table sideways to see every column.

No railroad tracks are mapped inside Quail or within one mile outside the community, and no rail crossings appear in the mapped crossing inventory. No streams are mapped inside or within one mile, and no named stream crossings or nearby lakes and ponds are identified. That means the mapped information does not point to a local rail or creek crossing, though the exact bore path still needs to be checked.

Who approves a Quail bore in Collingsworth County?

Quail has no city government, so local streets and permits fall to the county or state rather than a municipal department. Work in the right of way of Texas State Highway 203 or FM 1547 needs a TxDOT utility permit reviewed by the Childress District. The utility that owns the line submits the application through RULIS; we provide the bore plan and profile and work under that permit. TxDOT requires highway lines to be bored or tunneled beneath pavement, with the bore extending beneath all travel lanes on rural highways.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Who owns the lines serving Quail in Collingsworth County?

For a Quail bore, confirm the water provider for the specific address with the county or local water district before planning the route. Southwestern Electric Power, Greenbelt Electric Cooperative and Lighthouse Electric Cooperative report electric service in Collingsworth County, but the line owner for a particular address must be confirmed before conduit is planned. That identifies who can confirm the electric conduit requirements for a route near Texas State Highway 203 or FM 1547.

Line ownerWhat it isSourceSize
Southwestern Electric Power, Greenbelt Electric Cooperative and Lighthouse Electric CooperativeElectric utilities reporting service in Collingsworth CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

Housing figures are not published for a place as small as Quail, so the age of buried lines cannot be inferred from local housing data. Across 3.18 square miles with 17 residents, a service route may run along Texas State Highway 203 or FM 1547. Collingsworth County averages 24.2 inches of precipitation a year, with May averaging 3.6 inches. Before drilling near a marked utility, we expose it with hydrovac because paint does not show depth; for a proposed crossing under Texas State Highway 203, that means checking each marked line along the bore path.

Large HDPE conduit reels staged on a Rotate A Reel trailer for a fiber and utility installation in Oklahoma
HDPE conduit reels on a reel trailer for a fiber and utility installation in Oklahoma.

How far is Quail from Wellington and our Yukon yard?

Quail is in Collingsworth County at an elevation of 2,238 feet, and the mapped community covers 3.18 square miles. Its ZIP code is 79251. Wellington, the county seat, is 10.3 miles southeast; Samnorwood is 10.9 miles northeast, and Memphis is 15.9 miles southwest. Childress, the nearest larger city listed, is 33.6 miles south. From our Yukon yard, the drive is 197 road miles and about 3.8 hours, which factors into mobilization for Quail work.

Places near Quail

What kinds of directional bores come up in Quail?

  • Highway crossing: A bore beneath Texas State Highway 203 can carry water, sewer, gas, electric conduit or fiber without cutting the paved route.
  • FM route crossing: A proposed service beneath FM 1547 needs an alignment and entry points suited to the mapped loamy fine sand.
  • Water service: For an address in Quail, confirm the water provider before sizing a bore that approaches Texas State Highway 203.
  • Electric conduit: Southwestern Electric Power, Greenbelt Electric Cooperative and Lighthouse Electric Cooperative report county service, so identify the line owner for a Quail route first.
  • Fiber drop: A fiber bore near FM 1547 can use a narrow service line route, with marked utilities exposed before drilling close to them.
  • Rural service: A route toward Wellington or Samnorwood may involve longer access and mobilization planning from the Yukon yard.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

How do I get a Quail bore quote near Texas State Highway 203?

Start with a map pin or address, because a point near Texas State Highway 203 can have a different route and crossing scope from one near FM 1547. When planning a Quail bore in Collingsworth County, tell us what goes underground, the pipe or conduit size, and the footage. A sketch or plans help us check the proposed alignment and access.

The job scope sets the price, with ground, crossings and logistics each affecting the work. Quail’s mapped Miles loamy fine sand and deeper sandy clay loam shape drilling and reaming needs. Crossings of Texas State Highway 203, pavement or marked utilities can add planning and exposure work. Pit needs, excavator time and sand backfill also matter. The 197 road miles from Yukon affect mobilization, as can emergency or high profile work.

Questions people ask about boring in Quail

Does Trinity take directional boring jobs in Quail and Collingsworth County?

Yes. We take directional boring work in Quail, and our own crews or crews from partner drilling contractors we have vetted can perform the work. You work with Trinity from the first call through the bore log, including on a route near Texas State Highway 203.

What do housing records in Quail and Collingsworth County tell me about old buried lines?

Housing age figures are not published for Quail because the survey sample is too small to rely on. That means local housing data cannot tell us whether a line near FM 1547 is old or new. For a replacement bore, we check the proposed path and expose marked utilities before drilling nearby.

What ground does a Quail bore encounter in the Miles soil?

The USDA soil survey maps Miles soil across 80 percent of Quail, with loamy fine sand at the surface. At about 40 inches, sandy clay loam is mapped across 82 percent of the area. The loose upper soil may cave behind the bit, while the deeper clay can help hold the hole and grip pipe.

Will we encounter rock below the mapped Miles and Springer soil series on a bore in Quail?

Bedrock is not mapped in Quail’s top five feet, but that does not rule out rock at greater depth. The geologic map identifies a Holocene sand sheet deposit and Permian Guadalupian sedimentary rock. We use the planned depth and field conditions to guide the bore rather than treating the map as a site test.

Who approves a bore under Texas State Highway 203 in Quail through the TxDOT Childress District?

TxDOT reviews the utility permit for work in the right of way of Texas State Highway 203 through its Childress District. The line owner, not the drilling contractor, submits the application in RULIS. For a utility crossing of FM 1547 in Quail, we provide the bore plan and profile for the utility owner’s filing.

Which utility owns electric lines in Quail and Collingsworth County?

Southwestern Electric Power, Greenbelt Electric Cooperative and Lighthouse Electric Cooperative report electric service in Collingsworth County, but that does not establish the owner at every Quail address. Confirm the line owner before planning conduit, including on a route near FM 1547.

Does Trinity cover Wellington and rural sites outside Quail?

Yes. We take work around Quail, including Wellington, 10.3 miles southeast, and rural sites beyond the mapped community boundary. For a route from Quail toward Wellington, the address, access and footage help us plan the scope and mobilization from Yukon.

How much notice does Texas811 need for a Quail bore in Collingsworth County?

For a bore near Texas State Highway 203, request locates from Texas811 at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before it. If work slips more than 14 days past the original notice, submit a new request. Have worn or moved marks refreshed before continuing.

What affects the cost of directional boring under Texas State Highway 203 in Quail?

The job scope drives the price: Quail’s Miles loamy fine sand, pipe size and bore length affect drilling, while pavement, utility crossings and pit needs add work. A Texas State Highway 203 crossing has its own permit and planning considerations. For Quail work, our mobilization planning accounts for 197 road miles from the Yukon main office.

Where the Quail facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Quail

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Quail, Texas

Type the address of your job in Quail. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Quail

Same county: Dodson. All counties: Texas county list.