trinityboringsolutions.com

Ravenna Texas Directional Boring: Crosstell Clay, Lees Branch and FM 274

Quick Answer: Willow Street and FM 274 are routes where Trinity Boring Solutions performs directional boring, also called horizontal directional drilling (HDD), in Ravenna, Texas. The Yukon, Oklahoma main office is 204 road miles from Lees Branch, so distance is part of planning a Ravenna job. Crosstell soil covers 80 percent of the mapped area, and clay about 40 inches down can grip the pipe. Staged reaming and a same day pull can help manage that sticky ground.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Ravenna bores at a glance

  • Incorporated city in Fannin County, Texas. Population 192 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 204 miles, about 4.2 hours of driving.
  • Ground: Crosstell soil is mapped on 80 percent of the area, with clay about 40 inches down.
  • Rock: no bedrock is mapped in the top 60 inches.
  • Highways inside the boundary: FM 274 and FM 1753. State permit office: TxDOT Paris District.
  • Railroad track inside the boundary: none mapped.
  • Named streams inside the boundary: Lees Branch and Sandy Creek.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Which contractor handles directional boring near Lees Branch in Ravenna?

Ravenna is an incorporated city in Fannin County, and the Census Bureau Vintage 2024 estimate puts its population at 192. We take directional boring work in Ravenna, including water, sewer, gas, electric conduit and fiber routes near Lees Branch or along Sycamore Street. The route and line type determine the equipment and crossing plan.

Our main office is in Yukon, Oklahoma, and Ravenna work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. We are a family business that started in 1965, with directional boring work dating to 1982; for a service line along FM 274, our range runs from 3/4 inch service lines to 48 inch casing and bores from 10 feet to 5,000 feet.

Trinity Boring Solutions directional boring crew, drill rig and hydrovac trailer staged along an airport service road at Will Rogers World Airport in Oklahoma City
Our boring crew, drill and hydrovac trailer staged along a service road at Will Rogers World Airport in Oklahoma City. Photos on this page are from our jobs in Oklahoma and Texas.

What does the soil survey show about Crosstell soil in Ravenna?

The USDA soil survey maps Crosstell soil across 80 percent of Ravenna, including Crosstell fine sandy loam on slopes. At about 40 inches below the surface, the survey maps clay in 89 percent of the area and sandy clay loam in 11 percent; average clay content at that depth is 47 percent. That clay can get sticky on a reamer and swell around a pipe. These are mapped patterns, not test borings, so the bore route still needs field review near Willow Street.

USDA soil survey, inside the Ravenna city limitsWhat is mapped
Soil series mappedCrosstell 80 percent, Karma 11 percent and Ivanhoe 9 percent
Texture at the surfacefine sandy loam 80 percent, loam 11 percent and silt loam 9 percent
Texture about 40 inches downclay 89 percent and sandy clay loam 11 percent
Engineering class about 40 inches downfat clay (CH) 89 percent and lean clay (CL) 11 percent
Average clay content about 40 inches down47 percent
Bedrock mapped within 60 inchesNone mapped
Seasonal water table within 60 inches10 percent of the area
Flood prone soils1 percent of the area
High corrosion risk for uncoated steel89 percent of the area

When planning boring depth in Ravenna’s Crosstell soils, we treat bedrock as unmapped in the top five feet, without ruling out deeper rock. A seasonal water table within 60 inches is mapped in 10 percent of the area, and flood prone soils in 1 percent, so Lees Branch pits may need pumping and careful placement. High steel corrosion risk is mapped across 89 percent, making casing and tracer wire material a line owner decision. The geologic map names the Eagle Ford Formation, of Turonian age, with shale, siltstone and limestone; actual drilling conditions need to be checked on site.

How do crews bore through clay in Ravenna?

Crosstell clay mapped below the surface can cling to tooling and grip a pulled line. Along Ravenna streets, we match fluid, reaming and timing to the route and keep watch on returns.

  1. At Crosstell clay, we use thinner drilling fluid with polymer and ream in stages so sticky material is less likely to ball on the tooling.
  2. Because heavy clay covers much of Ravenna at about 40 inches, we watch fluid returns closely near Willow Street pavement to limit pressure beneath it.
  3. When a pit near Lees Branch meets a shallow seasonal water table, we plan smaller pits and pumping rather than letting water collect.
  4. Before drilling near a marked line on FM 274, we expose it by hydrovac; a walkover locator tracks the head and logs depth and pitch.
Walkover locator held over a flowing creek while tracking the drill head on a 385 foot rock bore in Guthrie, Oklahoma
Tracking the drill head with a walkover locator over a flowing creek on a 385 foot bore in Guthrie, Oklahoma.

Where might a Ravenna line go under Willow Street?

FM 274 and FM 1753 both run inside Ravenna, so a route that reaches their right of way needs highway planning. Willow Street is the longest named street at 1.24 miles inside the city, followed by Cedar Street at 0.76 miles and Sycamore Street at 0.67 miles. South Main adds another 0.59 miles. For a crossing under existing highway pavement, the installation is bored or tunneled rather than opened through the road; the path and required cover depend on the line and permit.

CrossingTypeMapped extentWho has a say
FM 274State highway1.4 roadway miles insideState highway office
FM 1753State highway1.3 roadway miles insideState highway office
Lees BranchStream0.39 channel miles insideChecked for Corps of Engineers jurisdiction
Sandy CreekStream0.19 channel miles insideChecked for Corps of Engineers jurisdiction
Anthony BranchStream nearby0.3 miles outsideChecked for Corps of Engineers jurisdiction
Caney CreekStream nearby0.6 miles outsideChecked for Corps of Engineers jurisdiction
Wilhoit BranchStream nearby0.8 miles outsideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

No railroad is mapped inside Ravenna or within one mile outside the limits, and no street and rail crossing is mapped. Lees Branch runs 0.39 channel miles inside the city, while Sandy Creek runs 0.19 miles; one mapped street crossing of a named stream means a creek route needs particular attention. For boring near Lees Branch in Ravenna, we account for no mapped lakes or ponds within one mile. A creek crossing is checked for federal jurisdiction during planning.

Who approves a Ravenna bore on Fannin County roads?

Ravenna is incorporated, so its city streets, including Willow Street and Cedar Street, belong to the city itself. For work in the right of way of FM 274 or FM 1753, the utility line owner, not the driller, submits the TxDOT utility permit application through RULIS for review by the TxDOT Paris District. We prepare the bore plan and profile for that filing and work under the owner’s permit. TxDOT cover rules vary by line type, and the permit can set another depth. Lees Branch also calls for a check of federal waterway jurisdiction; no railroad is mapped nearby.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Whose lines are already buried in Fannin County near Ravenna?

The water provider for a specific Ravenna address has to be confirmed with the city, Fannin County or the local water district before a bore is planned. EPA drinking water records do not tie a provider to this town. Electric service reported in Fannin County includes Oncor Electric Delivery Company, Texas New Mexico Power, Fannin County Electric Cooperative, Farmers Electric Cooperative, Grayson Collin Electric Cooperative and Lamar County Electric Cooperative Association. The actual line owner must be confirmed before planning a conduit bore near FM 1753.

Line ownerWhat it isSourceSize
Oncor Electric Delivery Company, Texas-New Mexico Power, Fannin County Electric Cooperative, Farmers Electric Cooperative, Grayson-Collin Electric Cooperative and Lamar County Electric Cooperative AssociationElectric utilities reporting service in Fannin CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put Ravenna’s median housing year at 1981; 35 percent of homes were built before 1960, 45 percent from 1960 to 1999 and 20 percent in 2000 or later. That mix can mean an older Cedar Street line is being replaced while a newer service is added elsewhere. Before a drill approaches a marked line, we use hydrovac potholing to expose it; paint shows location, not depth.

Coiled black HDPE conduit fitted with a pulling grip staged on a lawn along a completed bore path
Coiled HDPE conduit fitted with a pulling grip, staged on a lawn along a finished bore path.

How far is Ravenna from Bonham and the Yukon yard?

Ravenna is in Fannin County, covers 1.2 square miles and sits at an elevation of 603 feet. When coordinating underground work in Fannin County, we use ZIP code 75476 for Ravenna. Bonham, the county seat and nearest larger city, is 6.4 miles southeast; Ector is 6.6 miles south, Savoy is 8.7 miles southwest, Bells is 10.6 miles west and Dodd City is 11.5 miles southeast. The Yukon, Oklahoma main office is 204 road miles away, a drive of 4.2 hours, which can affect mobilization for work near FM 274.

Places near Ravenna

What kinds of bores come up near Sycamore Street in Ravenna?

  • Highway crossing: A line under FM 274 needs a permitted route and cover plan suited to its use and the TxDOT right of way.
  • Street service: A water or sewer connection near Cedar Street can pass beneath pavement without cutting the street surface.
  • Fiber conduit: A conduit along Sycamore Street needs marked utilities exposed before the drill approaches them.
  • Creek crossing: A route at Lees Branch needs depth planning below the channel and a check for federal jurisdiction.
  • Water service: At a Willow Street address, confirm the water provider for the specific property before laying out a service bore.
  • Electric conduit: Near FM 1753, identify the line owner before planning a conduit crossing or requesting a right of way permit.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What do you need to quote work near South Main in Ravenna?

For a South Main quote, send the address or map pin, what will go in the ground, the pipe or conduit size and footage; a sketch or plans help show the route. We use those details to understand whether the line crosses a street, FM 274 or a drainage feature before setting the bore scope.

The scope shapes the price through ground conditions, crossings and logistics. Crosstell clay can call for staged reaming, while a route under FM 1753 brings highway permit and cover planning into the work. The number of utilities to expose, pavement, pits, excavator time and sand backfill also matter. Lees Branch adds creek crossing considerations, and mobilization reflects the 204 road miles from Yukon.

Questions people ask about boring in Ravenna

Does Trinity take directional boring work in Ravenna and Fannin County?

Yes. We take directional boring work across Texas, including Ravenna in Fannin County. Our own crews and vetted drilling contractor partners can staff the work from satellite yards, while our Yukon office remains the main office. For a bore near FM 274, we stay involved from the first call through the bore log.

Who controls Sycamore Street in Ravenna, and can a bore avoid cutting it?

Sycamore Street is a city street because Ravenna is incorporated. A directional bore can pass under pavement with entry and exit pits in dirt where the site allows, leaving the street surface uncut. The route, utility locations and access still need review before work is laid out.

Do older buried lines near Cedar Street in Ravenna affect replacement bores?

They can. Census housing estimates put the median year built at 1981, with 35 percent of homes built before 1960. That does not establish the age of a buried line, but an older Cedar Street service may need replacement planning and careful exposure of marked utilities before drilling nearby.

Can groundwater or flooding affect bore pits near Lees Branch in Ravenna?

It can affect some sites. The soil survey maps a seasonal water table within 60 inches in 10 percent of Ravenna and flood prone soils in 1 percent. A pit near Lees Branch may need a location and depth plan that accounts for water, and creek crossings are checked for federal jurisdiction.

Does Crosstell soil in Ravenna pose a corrosion concern for steel pipe?

The mapped soils show high steel corrosion risk across 89 percent of Ravenna, so the line owner should consider casing and tracer wire materials. Crosstell fine sandy loam is the dominant mapped soil, but the survey is not a site test. HDPE does not share steel’s soil corrosion concern.

What ground does a bore pass through in Crosstell soil in Ravenna?

Crosstell soil covers 80 percent of the mapped area, and at about 40 inches the USDA survey maps clay across 89 percent of Ravenna. That sticky clay can build on a reamer and grip the pipe. Field conditions along Willow Street still need to be checked before selecting the bore method.

Does Trinity cover Bonham and rural properties outside Ravenna?

Yes. We take work around Ravenna as well as nearby Bonham, which is 6.4 miles southeast, and rural sites outside the city limits. A property near FM 1753 or farther along a rural route can affect access and mobilization, so the address or map pin helps define the work area.

How much notice does Texas811 need for a Ravenna bore near Willow Street?

For Willow Street, submit the Texas811 locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before the start. For an FM 274 schedule, if the start moves more than 14 days past the original notice, we make a new request. Along South Main in Ravenna, we refresh any worn or moved marks before our boring work continues.

What affects the cost of a directional bore near FM 274 in Ravenna?

Length, pipe or conduit size, Crosstell clay, utility crossings, pavement, creek work, pits and equipment time all affect the scope. A bore in the FM 274 right of way also needs permit planning. Ravenna’s 204 road miles from Yukon can affect mobilization; the route details determine which factors apply.

Where the Ravenna facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Ravenna

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Ravenna, Texas

Type the address of your job in Ravenna. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Ravenna

Same county: Leonard · Honey Grove · Trenton · Ladonia · Bailey · Windom · Pecan Gap. All counties: Texas county list.