Bedias Texas Directional Boring: Axtell Soil, Simes Creek And State Highway 90
Quick Answer: Can we get your line beneath Simes Creek or Texas State Highway 90 without cutting the surface? Trinity Boring Solutions does directional boring, also called horizontal directional drilling (HDD), for Bedias crossings like these. The Yukon, Oklahoma main office is 378 road miles away, so a bore near Main Street needs mobilization planned around that distance. Axtell soil covers 52 percent of the mapped area, and clay below the surface can grip the pipe, so the drilling fluid and reaming sequence matter.
Bedias bores at a glance
- Incorporated city in Grimes County, Texas. Population 402 (Census Bureau 2024 estimate).
- Road distance from our Yukon, Oklahoma main office: 378 miles, about 7.4 hours of driving.
- Ground: Axtell soil is mapped on 52 percent of the area, with clay about 40 inches down.
- Rock: bedrock is mapped within 60 inches on 6 percent of the area.
- Highways inside the boundary: Texas State Highway 90, FM 1696, FM 2620 and Loop 361. State permit office: TxDOT Bryan District.
- Railroad track inside the boundary: none mapped.
- Named streams inside the boundary: Simes Creek and Town Branch.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Who can do directional boring under Main Street in Bedias?
Can we get your line under a Bedias road or creek without cutting across it? We take directional boring work in Grimes County, where the Census Bureau Vintage 2024 estimate puts the population at 402. A water service can run beneath Main Street, while sewer, gas, electric conduit or fiber can be routed under Magnolia Street or another local crossing to avoid opening the surface.
Our main office is in Yukon, Oklahoma, and Bedias work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our longest bore runs roughly 4,100 feet with 48 inch pipe under the Arkansas River in Tulsa. Beside that reach, a Bedias job under Simes Creek or Main Street is a shorter local crossing planned for its own ground and access.

How does Axtell soil affect a Bedias bore?
The USDA soil survey maps Axtell fine sandy loam on 52 percent of Bedias, with Tabor fine sandy loam on 16 percent and Mabank fine sandy loam on 12 percent. Surface texture is fine sandy loam across 92 percent of the mapped area, but about 40 inches down, clay is mapped across 83 percent. In Bedias, we consider the reported 41 percent average clay content at that depth alongside mapped Axtell soil areas. We treat Bedias mapped Axtell and Tabor soil patterns as planning references, not replacements for test borings. Sticky clay can gather on a reamer and grip a pipe, so the actual route needs to guide the drilling plan.
| USDA soil survey, inside the Bedias city limits | What is mapped |
|---|---|
| Soil series mapped | Axtell 52 percent, Tabor 16 percent, Mabank 12 percent, Singleton, variant 5 percent and Nahatche 4 percent |
| Texture at the surface | fine sandy loam 92 percent, clay loam 5 percent and loamy fine sand 3 percent |
| Texture about 40 inches down | clay 83 percent, bedrock 6 percent and stratified loam to silty clay loam 4 percent |
| Engineering class about 40 inches down | fat clay (CH) 74 percent and lean clay (CL) 19 percent |
| Average clay content about 40 inches down | 41 percent |
| Bedrock mapped within 60 inches | 6 percent of the area (0 percent hard rock, 6 percent weathered rock) |
| Seasonal water table within 60 inches | 13 percent of the area |
| Flood prone soils | 5 percent of the area |
| High corrosion risk for uncoated steel | 94 percent of the area |
The survey maps bedrock within 60 inches on 6 percent of the area, with typical depth at 37 inches, so a route may meet shallow rock. Seasonal water tables occur within 60 inches on 13 percent, and flood prone soils cover 5 percent, both worth checking near Simes Creek. High steel corrosion risk is mapped on 94 percent, so the line owner should consider casing and tracer wire materials; HDPE avoids that steel concern. The Cadell Formation, an Eocene unit, includes clay, siltstone and sandstone, so ground can change along a bore.
What does it take to bore through Bedias clay?
Axtell soil and clay mapped below the surface call for a controlled hole, not a fast pull. We adjust the fluid, reaming sequence and timing to the ground along the route, including near Simes Creek.
- Axtell soil overlies clay across much of the mapped area, so we use suitable fluid and staged reaming to keep sticky cuttings from building on the reamer.
- With heavy clay mapped below Bedias, we watch fluid returns near Main Street and keep pressure controlled to reduce the chance of lifting pavement.
- Seasonal water tables are mapped within 60 inches on 13 percent of the area; near Simes Creek, small pits and pumping may help manage water.
- Before drilling near a marked utility on Magnolia Street, we hydrovac pothole to confirm its depth; a walkover locator tracks the drill head and records depth and pitch.

Which roads and creeks could a Bedias bore cross near Simes Creek?
Texas State Highway 90 has 1.4 mapped roadway miles inside Bedias, while FM 1696 has 1.3, FM 2620 has 0.4 and Loop 361 has 0.2. A bore beneath an existing highway keeps the pavement intact, subject to the required TxDOT permit and plan. Main Street is the longest named street at 0.7 miles; Main Loop spans 0.63 miles and Magnolia Street 0.61 miles. A street crossing can leave those surfaces uncut while a line passes below.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| Texas State Highway 90 | State highway | 1.4 roadway miles inside | State highway office |
| FM 1696 | State highway | 1.3 roadway miles inside | State highway office |
| FM 2620 | State highway | 0.4 roadway miles inside | State highway office |
| Loop 361 | State highway | 0.2 roadway miles inside | State highway office |
| Simes Creek | Stream | 1.03 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Town Branch | Stream | 0.9 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Bishop Creek | Stream nearby | 0.3 miles outside | Checked for Corps of Engineers jurisdiction |
| Rocky Branch | Stream nearby | 0.4 miles outside | Checked for Corps of Engineers jurisdiction |
| Bowman Creek | Stream nearby | 0.6 miles outside | Checked for Corps of Engineers jurisdiction |
| Lake Bedias | Lake or pond | 42 acres, nearby | Checked for Corps of Engineers jurisdiction |
No railroad is mapped inside Bedias or within 1 mile outside its limits, so there is no local track route identified here. Simes Creek runs 1.03 channel miles in the city and Town Branch runs 0.9; mapped street crossings of named streams total five. A route near either creek needs its channel and banks considered, and water crossings are checked for U.S. Army Corps of Engineers jurisdiction during planning. Lake Bedias is a 42 acre lake outside the city limits, within 1 mile.
Whose permission does a Bedias bore in Grimes County need?
Main Street and Magnolia Street are city streets because Bedias is incorporated; the city has authority over its streets. For work in the right of way of Texas State Highway 90, FM 1696, FM 2620 or Loop 361, the utility owner applies for a TxDOT utility permit in RULIS, reviewed by the TxDOT Bryan District. We prepare the bore plan and profile for the utility owner to submit and work under its permit. TxDOT cover depths depend on the line: electric and communication lines need 60 inches at a crossing, while water needs 60 inches and pressurized sewer needs 60 inches.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
Whose lines are already buried in Grimes County near Bedias?
The provider for a specific Bedias address cannot be matched from the available EPA drinking water records. Confirm the water provider with the city, Grimes County or the local water district before planning a bore near Main Street. Entergy Texas, Mid-South Electric Cooperative Association and San Bernard Electric Cooperative report electric service in Grimes County, but that does not identify the line owner at every address. We confirm the owner before planning an electric conduit bore.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| Entergy Texas, Mid-South Electric Cooperative Association and San Bernard Electric Cooperative | Electric utilities reporting service in Grimes County | EIA Form 861 | Confirm the line owner by address |
The American Community Survey 2019 to 2023 five year estimates put Bedias housing’s median year built at 1987. Bedias housing age is estimated at 17 percent before 1960, 57 percent from 1960 to 1999, and 26 percent in 2000 or later, so we verify utilities before boring. A replacement line along Main Loop may sit near older buried services, while newer homes can need new connections. Before drilling near any marked line, we hydrovac pothole it; paint shows position, not depth.

Where is Bedias in relation to Iola and other nearby places?
Bedias is in Grimes County, at an elevation of 307 feet, and covers 1.11 square miles. Bedias is served by ZIP code 77831, and we use that address detail when organizing underground work. Iola is 7.9 miles west, Madisonville 12.1 miles north, and Shiro 12.7 miles south. Anderson, the county seat, is 20.6 miles south; Huntsville is the nearest larger city, 23.8 miles east. The Yukon, Oklahoma yard is 378 road miles away, a 7.4 hour drive, so that distance is part of planning a bore near Texas State Highway 90.
Places near Bedias
- Directional boring in Iola: 7.9 miles west
- Directional boring in Madisonville: 12.1 miles north
- Directional boring in Shiro: 12.7 miles south
- Directional boring in Richards: 18 miles south
- Directional boring in Kurten: 19.7 miles west
- Directional boring in Huntsville: 23.8 miles east
What would we bore under Main Street in Bedias?
- Highway crossing: A bore beneath Texas State Highway 90 can carry water or conduit without opening the existing pavement.
- Street service: A replacement water or sewer line beneath Main Street can avoid cutting the named street surface.
- Creek crossing: A route under Simes Creek needs a plan for the channel and banks, with jurisdiction checked during planning.
- Fiber drop: Fiber conduit beneath Magnolia Street can connect a service while keeping the street surface intact.
- Drainage crossing: Town Branch runs 0.9 channel miles in Bedias, so a bore route there needs attention to the channel.
- Farm and acreage service: A line near Iola can be planned around the address, footage and Axtell soil along its route.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
What should I send for a Bedias quote near Texas State Highway 90?
A map pin matters near Texas State Highway 90 because a shift in the crossing point can change the right of way, access and utilities in the bore path. For a planned Bedias crossing on Texas State Highway 90, we need the address or pin, what goes underground, pipe or conduit size, and footage. A sketch or plans help us see the route and any nearby Simes Creek drainage.
For a Bedias bore, clay mapped about 40 inches down is an early planning factor because it can cling to the reamer and pipe. We also look at the line size and length, utilities to expose, pavement, pits and any creek crossing near Simes Creek. Work in the Texas State Highway 90 right of way adds permit planning. The 378 road miles from Yukon also affect mobilization, while emergency timing or a difficult access plan can change the scope.
Questions people ask about boring in Bedias
Does Trinity Boring Solutions take directional boring jobs in Grimes County near Bedias?
Yes. We take directional boring work in Grimes County and plan staffing through our own crews and vetted drilling contractor partners rather than a Bedias office. Our Yukon, Oklahoma main office stays involved from the first call through the bore log, whether a route is under Main Street or another local crossing.
Can you bore a line under Simes Creek in Bedias?
A bore under Simes Creek can be planned after the route, channel and banks are reviewed. The creek has 1.03 channel miles within Bedias, and water crossings are checked for U.S. Army Corps of Engineers jurisdiction during planning. The exact crossing point and what the line carries shape the bore plan.
Who owns electric lines in Grimes County near Bedias, and who confirms conduit specs?
The specific line owner must be confirmed for the Bedias address before we plan an electric conduit bore. Entergy Texas, Mid-South Electric Cooperative Association and San Bernard Electric Cooperative report service in Grimes County, but that does not identify the provider at every property. The line owner confirms conduit requirements for its line.
Does Bedias control Magnolia Street, and can a bore avoid cutting it?
Bedias is incorporated, so its city streets, including Magnolia Street, belong to the city. Directional boring can route a line beneath the street rather than opening the pavement, subject to the route and ground conditions. We locate and expose marked utilities along the bore path before drilling near them.
Do older buried lines near Main Loop affect replacement bores in Bedias?
They can affect the route and the need to expose existing lines first. Bedias housing has a median year built of 1987; the American Community Survey estimates 17 percent of homes were built before 1960. A replacement bore near Main Loop needs its marked utilities pothole exposed before the drill approaches.
Could groundwater or flood prone soil affect a Bedias bore pit near Simes Creek?
It could at some locations. The USDA soil survey maps seasonal water tables within 60 inches on 13 percent of Bedias and flood prone soils on 5 percent. Near Simes Creek, we account for wet ground and the channel when planning pit locations and the bore depth.
How far is Bedias from the Yukon office, and does Huntsville affect a bore job?
The Yukon, Oklahoma main office is 378 road miles from Bedias, a 7.4 hour drive. Huntsville is 23.8 miles east and is the nearest larger city, but the job’s address, access and scope determine the field plan. The distance from Yukon is considered when planning mobilization for a Texas State Highway 90 crossing.
How much 811 notice is needed for a Bedias bore along Main Street?
Texas811 requires a locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before work starts. If a Main Street bore starts more than 14 days after the original notice, submit a new request. For work near Main Loop in Bedias, we have worn or moved marks refreshed through Texas811 before work continues.
What affects the cost of a directional bore under Texas State Highway 90 in Bedias?
The route length and pipe or conduit size matter, along with the clay mapped below Bedias, utilities that need exposure, pavement, pits and creek crossings. A Texas State Highway 90 right of way adds permit planning, and mobilization reflects the 378 road miles from Yukon. Emergency timing and access conditions can also change the work required.
Where the Bedias facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside Bedias
- U.S. Census Bureau, TIGER/Line 2024: Bedias boundary, roads, rail lines and streams
- U.S. Census Bureau, Vintage 2024 population estimates: Bedias
- U.S. Census Bureau, American Community Survey 2019 to 2023: Bedias housing units and year built
- Macrostrat geologic map compilation: map units under Bedias
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving Grimes County
- U.S. Geological Survey, Elevation Point Query Service: Bedias elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to Bedias
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in Bedias
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in Bedias, Texas
Type the address of your job in Bedias. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
County and State Pages for Bedias
Same county: Navasota · Plantersville · Anderson · Todd Mission · Pinebrook. All counties: Texas county list.
