trinityboringsolutions.com

Sherwood Shores Texas Directional Boring: Aubrey Soil, US 377 and Cedar Creek

Quick Answer: Sherwood Shores is an unincorporated community in Grayson County, so it has no city government to own its streets; we bore routes such as Cedar Creek without cutting the crossing. We do directional boring, also called horizontal directional drilling (HDD), in Sherwood Shores, Texas. Our Yukon, Oklahoma main office is 154 road miles away, and US 377 runs inside the mapped community. Aubrey soil and clay at depth can make reaming sticky, so the bore plan accounts for ground conditions.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Sherwood Shores bores at a glance

  • Unincorporated community in Grayson County, Texas. Population 1,165 (2020 Census count).
  • Road distance from our Yukon, Oklahoma main office: 154 miles, about 3.2 hours of driving.
  • Ground: Aubrey soil is mapped on 21 percent of the area, with clay about 40 inches down.
  • Rock: bedrock is mapped within 60 inches on 51 percent of the area.
  • Highways inside the boundary: US 377. State permit office: TxDOT Paris District.
  • Railroad track inside the boundary: none mapped.
  • Named streams inside the boundary: Cedar Creek.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who handles directional boring near US 377 in Sherwood Shores?

Sherwood Shores is an unincorporated community in Grayson County, with 1,165 residents in the 2020 Census count; the Census Bureau does not publish yearly estimates for unincorporated places. We install water, sewer, gas, electric conduit and fiber along routes such as Harbour View Road or beneath US 377, with the line type and existing utilities shaping the bore plan.

Our main office is in Yukon, Oklahoma, and Sherwood Shores work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. In Grayson County, our family business began in 1965 and has done directional boring since 1982. We have had no utility strike in over 25 years; that record matters when planning around the electric infrastructure reported by Oncor Electric Delivery Company and other providers in Grayson County.

Trinity Boring Solutions Vermeer D24x40 directional drill set up for a bore
Our Vermeer D24x40 directional drill set up for a bore. Photos on this page are from our jobs in Oklahoma and Texas.

What ground does a bore meet in Sherwood Shores near Aubrey soil?

The USDA soil survey maps Aubrey soil across 21 percent of Sherwood Shores, with Crockett at 18 percent and Konsil at 11 percent. Fine sandy loam is the leading surface texture, mapped across 35 percent of the area. At about 40 inches below the surface, clay is mapped across 30 percent, and the average clay content at that depth is 41 percent. Aubrey and Crockett are mapped soil patterns in Sherwood Shores, not test borings, so we verify ground conditions before choosing a bore plan. Sticky clay can cling to a reamer, so the actual route and depth matter when selecting the drilling approach.

USDA soil survey, inside the Sherwood Shores mapped community boundaryWhat is mapped
Soil series mappedAubrey 21 percent, Crockett 18 percent, Konsil 11 percent, Crosstell 9 percent and Callisburg 4 percent
Texture at the surfacefine sandy loam 35 percent, loam 19 percent and stony fine sandy loam 11 percent
Texture about 40 inches downclay 30 percent, bedrock 22 percent and sandy clay loam 11 percent
Engineering class about 40 inches downfat clay (CH) 32 percent and lean clay (CL) 16 percent
Average clay content about 40 inches down41 percent
Bedrock mapped within 60 inches51 percent of the area (0 percent hard rock, 51 percent weathered rock)
Seasonal water table within 60 inches0 percent of the area
Flood prone soils1 percent of the area
High corrosion risk for uncoated steel56 percent of the area

The USDA soil survey maps bedrock within 60 inches across 51 percent of Sherwood Shores and within 40 inches across 22 percent; typical depth is 41 inches. The mapped geology includes Pawpaw Formation, Weno Limestone, and Denton Clay, undivided, of Albian age, so a route may move from soil into weathered rock. No seasonal water table within 60 inches is mapped, while flood prone soils cover 1 percent. High steel corrosion risk is mapped across 56 percent, so the line owner should consider steel casing and tracer wire materials; HDPE does not share that steel concern.

With Crockett soils mapped near Sherwood Shores, how do we plan a bore through clay without treating the map as a test boring?

Aubrey soil and clay mapped near 40 inches call for a plan that manages sticky cuttings and changing ground. We track the drill head from the surface and adjust the bore to the route and the lines marked along Sherwood Shores streets.

  1. We use thinner drilling fluid and polymer where clay is sticky, then ream in stages; Aubrey soil mapped around Sherwood Shores makes the actual bore route important.
  2. Where heavy clay is encountered near Sherwood Shores streets, we watch fluid returns and keep pressure controlled so fluid does not lift pavement.
  3. When a bore path is planned near Cedar Creek, we hydrovac pothole every marked utility before drilling nearby. For a proposed line beneath Harbour View Road, each marked crossing must be exposed first.
  4. We track the drill head from the surface and log depth and pitch; mapped bedrock near 41 inches means the crew watches for a change from soil to rock.
Rock bit on the drill rod at the front of a Vermeer D24x40 S3 with broken sandstone at the entry of a rock bore in Guthrie, OK
Rock bit on the drill rod with broken sandstone at the entry of a rock bore in Guthrie, Oklahoma.

Where might a line pass under Cedar Creek in Sherwood Shores?

US 377 has 1.0 mapped roadway mile inside the Sherwood Shores community boundary, and no highway is mapped within 1.5 miles outside it. Hillcrest Circle is the longest named street at 3.6 miles. Lake Road covers 1.51 miles, and Harbour View Road covers 0.86 miles. These routes can bring a bore close to homes, pavement and existing lines, so the entry and exit pits and the path beneath the road need to be planned together.

CrossingTypeMapped extentWho has a say
US 377US highway1 roadway miles insideState highway office
Cedar CreekStream2.11 channel miles insideChecked for Corps of Engineers jurisdiction
Lake TexomaLake or pond14,044 acres, insideChecked for Corps of Engineers jurisdiction
Big Mineral ArmLake or pond6,399 acres, insideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

No railroad is mapped inside Sherwood Shores or within 1 mile outside the community, and no street and rail crossing is mapped. Cedar Creek runs 2.11 channel miles through the community, with one mapped street crossing of a named stream. Lake Texoma and Big Mineral Arm are also inside the boundary. A proposed creek or lake crossing needs review for U.S. Army Corps of Engineers jurisdiction during planning.

Who approves a bore in Grayson County near US 377 in Sherwood Shores?

Sherwood Shores has no city government, so street permits are handled at the county level unless a state road is involved. For work in US 377 right of way, TxDOT’s Paris District reviews the utility permit application in its online RULIS system. The utility owner files it; we prepare the bore plan and profile and work under the permit issued to that owner. For electric or communication lines crossing the highway, the stated cover is at least 60 inches below the lowest crossed grade; along the right of way it is 48 inches. Water lines need 60 inches at crossings and 36 inches along the right of way, while pressurized sewer needs 60 inches at crossings. TxDOT rules require boring or tunneling beneath existing highway pavement. A creek crossing at Cedar Creek is checked for federal jurisdiction during planning.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Whose lines may be in the ground in Grayson County near Sherwood Shores?

For a Lake Road address, the water provider has to be confirmed with the county or local water district before a bore is planned. EPA drinking water records for Texas do not tie systems to towns, and no system carries the Sherwood Shores name, so the provider for a specific address could not be matched. Utilities reporting electric service in Grayson County include Oncor Electric Delivery Company, Texas-New Mexico Power, Cooke County Electric Cooperative Association, Denton County Electric Cooperative, Fannin County Electric Cooperative and Grayson-Collin Electric Cooperative. Before we plan an electric conduit bore along Hillcrest Circle, we confirm the line owner.

Line ownerWhat it isSourceSize
Oncor Electric Delivery Company, Texas-New Mexico Power, Cooke County Electric Cooperative Association, Denton County Electric Cooperative, Fannin County Electric Cooperative and Grayson-Collin Electric CooperativeElectric utilities reporting service in Grayson CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put the median housing year in Sherwood Shores at 1994; 24 percent of units were built before 1960, and 40 percent in 2000 or later. A bore along Hillcrest Circle may serve a replacement route or a newer connection, but housing age does not establish pipe age. Along US 377, we hydrovac pothole every marked utility on the bore path before drilling nearby; paint shows position, not depth.

Exposed underground utility line in a hand dug potholing pit before a directional bore in Oklahoma
An existing utility line exposed in a pothole before a directional bore in Oklahoma.

Where is Sherwood Shores in relation to Denison?

Sherwood Shores is an unincorporated community in Grayson County, Texas, at an elevation of 682 feet and covering 2.85 square miles. Its ZIP code is 76245. Preston is 8.8 miles east, Pottsboro is 9.8 miles southeast, Sadler is 11.7 miles south, and Whitesboro is 14.0 miles south. Denison, the nearest larger city, is 14.6 miles east; Sherman, the county seat, is 18.6 miles southeast. The Yukon yard is 154 road miles away, about a 3.2 hour drive, which affects mobilization for work near Cedar Creek.

Places near Sherwood Shores

Which jobs call for a bore along Hillcrest Circle in Sherwood Shores?

  • Highway crossing: A bore beneath US 377 keeps the route below the pavement, with the utility owner’s permit setting the approved plan.
  • Street service: A water or sewer service along Lake Road can use entry and exit pits off the paved route instead of an open cut.
  • Fiber conduit: A conduit route on Hillcrest Circle can pass under driveways while marked utilities are exposed before drilling near them.
  • Creek crossing: A proposed Cedar Creek bore needs a planned path beneath the channel and a jurisdiction check during planning.
  • Lake side route: A service near Lake Texoma needs an alignment that accounts for the lake crossing and access to both pits.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What drives the price of a bore near Whitaker Circle in Sherwood Shores?

For a route near Whitaker Circle, send the address or map pin, what is going in the ground, the pipe or conduit size and footage; a sketch or plans help. Show any US 377, Cedar Creek or pavement crossing on the route. Those details let us assess access, ground and marked utilities before setting the work scope.

Ground conditions come first: clay at about 40 inches can load the reamer, and mapped bedrock may change the tooling and pace. Next are bore length and pipe size, followed by the number of utilities to expose and any concrete or pavement near Whitaker Circle or US 377. A Cedar Creek crossing can add planning needs. Pit size, excavator time and sand backfill also affect the job, as does mobilization from Yukon, 154 road miles away.

Questions people ask about boring in Sherwood Shores

Does Trinity take directional boring jobs in Grayson County at Sherwood Shores, and who staffs them?

Yes. We take directional boring work in Sherwood Shores, and crews are our own or work from satellite yards run by drilling contractors we have vetted. Our team stays involved from the first call through the bore log. For a route near US 377, the job details determine which crew and equipment fit the work.

Which electric company owns a line in Grayson County at Sherwood Shores, and who confirms conduit specs?

The address determines the line owner; county reports name Oncor Electric Delivery Company, Texas-New Mexico Power and several electric cooperatives, but do not identify one provider for every Sherwood Shores address. We confirm the owner before a conduit bore. For a route near Lake Road, the owner should also confirm the required conduit specifications.

Who controls Harbour View Road in Sherwood Shores, and does a bore require cutting it?

There is no city government in Sherwood Shores, so county or state authority depends on the road. A route beneath Harbour View Road can be installed by boring rather than cutting the pavement, subject to the applicable permit and site plan. We locate and expose marked utilities before drilling near them.

Do older lines near Lake Road in Sherwood Shores need replacement bores?

Possibly, but the age of a home does not prove the age of its buried line. The American Community Survey 2019 to 2023 estimates give Sherwood Shores a median housing year of 1994, with 24 percent of units built before 1960. A Lake Road replacement route needs its existing utilities located and exposed before drilling.

Does Aubrey soil in Sherwood Shores corrode steel, and what pipe can be used?

The USDA soil survey maps high steel corrosion risk across 56 percent of Sherwood Shores. The line owner decides whether steel casing or tracer wire needs protective materials. Konsil is a mapped soil series in Sherwood Shores, and we know HDPE is not subject to that soil corrosion concern. For a route through Aubrey soil, the owner should choose materials for the specific line and installation.

What ground does a bore meet in Sherwood Shores near Aubrey soil?

The USDA soil survey maps Aubrey soil across 21 percent of the community. At about 40 inches, clay is mapped across 30 percent of the area and average clay content is 41 percent; these are mapped patterns, not test borings. Sticky clay can build on a reamer, while mapped bedrock may require slower drilling.

Can I reach Trinity after hours for an urgent bore near Harbour View Road in Sherwood Shores?

Yes. For Sherwood Shores callers, we answer Trinity’s phone 24 hours a day at (405) 409-7423, while the Yukon main office is 154 road miles away. For an urgent job near Harbour View Road, the address, what line needs to go in and any road or creek crossing help us understand the request. Emergency response is one of our services.

How early should I call Texas811 for a bore on Hillcrest Circle in Sherwood Shores, and what if marks move?

The excavator must request a Texas811 locate at least 48 hours before work begins, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days ahead. For a Hillcrest Circle bore, marks that wear off or move must be refreshed through Texas811 before work continues. For a Sherwood Shores start coordinated through the TxDOT Paris District, if we slip more than 14 days past the original notice, we make a new request.

What affects the price of directional boring under US 377 in Sherwood Shores?

The route and ground matter first: clay and possible bedrock affect drilling time, while the bore length, pipe size and number of utility crossings affect the work plan. A US 377 crossing may require a TxDOT utility permit, and pavement, pits and creek crossings can add work. Mobilization from the Yukon yard is also part of the job scope.

Where the Sherwood Shores facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Sherwood Shores

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Sherwood Shores, Texas

Type the address of your job in Sherwood Shores. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Sherwood Shores

Same county: Sherman · Van Alstyne · Howe · Gunter · Collinsville · Whitewright · Bells · Tioga · Southmayd · Tom Bean · Knollwood · Dorchester. All counties: Texas county list.