trinityboringsolutions.com

Tira Texas Directional Boring: Crockett Loam, Vaden Creek and Highway 154

Quick Answer: Texas State Highway 154 and Vaden Creek set the main crossing questions; Trinity Boring Solutions does directional boring, also called horizontal directional drilling (HDD), in Tira, Texas. From the Yukon, Oklahoma main office, Tira is 264 road miles away, and Farm Road 1536 may shape access at the work site. USDA maps Crockett soil across 33 percent of town, with clay common about 40 inches down, so sticky cuttings and swelling ground call for controlled fluid and staged reaming.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Tira bores at a glance

  • Incorporated city in Hopkins County, Texas. Population 341 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 264 miles, about 5.2 hours of driving.
  • Ground: Crockett soil is mapped on 33 percent of the area, with clay about 40 inches down.
  • Rock: bedrock is mapped within 60 inches on 34 percent of the area.
  • Highways inside the boundary: Texas State Highway 154, Texas State Highway 19 and FM 1536. State permit office: TxDOT Paris District.
  • Railroad track inside the boundary: none mapped.
  • Named streams inside the boundary: Vaden Creek and Logston Branch.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Which contractor handles directional boring near Vaden Creek in Tira?

Tira is an incorporated town in Hopkins County with 341 residents, the Census Bureau Vintage 2024 estimate. Along Texas State Highway 19 or Farm Road 1536, we install water and sewer pipe, gas lines, electric conduit and fiber where a route needs to pass beneath pavement or connect a service.

Our main office is in Yukon, Oklahoma, and Tira work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our longest bore ran roughly 4,100 feet with 48 inch pipe under the Arkansas River in Tulsa; beside that reach, a service under Farm Road 1536 is a shorter, site specific run. Our family business started in 1965 and has drilled directionally since 1982, experience we bring to routes around Vaden Creek.

Trinity Boring Solutions Vermeer D24x40 directional drill set up for a bore
Our Vermeer D24x40 directional drill set up for a bore. Photos on this page are from our jobs in Oklahoma and Texas.

What does the soil survey show beneath Tira and Crockett soil?

The USDA soil survey maps Crockett soil across 33 percent of Tira, Woodtell across 25 percent, Freestone across 19 percent, Annona across 11 percent and Nahatche across 9 percent. About 40 inches below the surface, the mapped texture is clay in 57 percent of the area, clay loam in 35 percent and loam in 9 percent. Average clay content at that depth is 43 percent, and heavy clay is mapped across 82 percent. That points to sticky cuttings that can grip pipe, so reaming needs control rather than excess fluid.

USDA soil survey, inside the Tira city limitsWhat is mapped
Soil series mappedCrockett 33 percent, Woodtell 25 percent, Freestone 19 percent, Annona 11 percent and Nahatche 9 percent
Texture at the surfaceloam 69 percent, fine sandy loam 19 percent and clay loam 12 percent
Texture about 40 inches downclay 57 percent, clay loam 35 percent and loam 9 percent
Engineering class about 40 inches downfat clay (CH) 87 percent and lean clay (CL) 13 percent
Average clay content about 40 inches down43 percent
Bedrock mapped within 60 inches34 percent of the area (0 percent hard rock, 34 percent weathered rock)
Seasonal water table within 60 inches27 percent of the area
Flood prone soils9 percent of the area
High corrosion risk for uncoated steel100 percent of the area

The USDA soil survey maps weathered bedrock within 60 inches in 34 percent of Tira; hard bedrock is not mapped at that depth, and typical bedrock depth is 47 inches. A seasonal water table is mapped within 60 inches in 27 percent, and flood prone soils cover 9 percent, which can affect pit placement near Vaden Creek. High steel corrosion risk is mapped across the area, so the line owner should weigh casing and tracer wire materials. The Midway Group, undivided, is Paleocene age and includes clay, sand, silt, limestone and marlstone, so a route may meet changing ground.

What does it take to bore through clay in Tira?

Crockett soil and the clay mapped about 40 inches down make Tira a place to manage sticky returns, not simply push harder. We plan the bore around the route and the ground.

  1. Crockett clay can ball on the reamer and grip pipe, so we use a thinner fluid mix, add polymer and open the hole in stages.
  2. With heavy clay mapped across 82 percent of Tira, we watch fluid returns closely near Texas State Highway 154 to limit pressure beneath pavement.
  3. Where the seasonal water table is mapped within 60 inches, including parts of the area near Vaden Creek, we keep pits small and pump them as needed.
  4. Before crossing Farm Road 1536, we expose each marked utility on the bore path, then track the drill head from the surface and log depth and pitch.
Bore pit with a 6 inch PVC sleeve, traffic cones and blue water line flags at NE 24th Street in Oklahoma City
A bore pit with a 6 inch PVC sleeve, traffic cones and blue water line flags at NE 24th Street in Oklahoma City.

What is in the way of a new line near Vaden Creek in Tira?

Texas State Highway 154, Texas State Highway 19 and Farm Road 1536 each have mapped roadway miles inside Tira. Farm Road 1536 is also the longest named street in the records, with 0.59 miles in town. A line crossing one of these roads needs a planned entry and exit beyond the pavement, with depth and alignment suited to the route. Boring keeps the road surface intact, while access and the specific utility route determine pit locations.

CrossingTypeMapped extentWho has a say
Texas State Highway 154State highway3.7 roadway miles insideState highway office
Texas State Highway 19State highway3.7 roadway miles insideState highway office
FM 1536State highway3 roadway miles insideState highway office
Vaden CreekStream0.37 channel miles insideChecked for Corps of Engineers jurisdiction
Logston BranchStream0.16 channel miles insideChecked for Corps of Engineers jurisdiction
Wolf CreekStream nearby0.1 miles outsideChecked for Corps of Engineers jurisdiction
South Sulphur RiverStream nearby0.5 miles outsideChecked for Corps of Engineers jurisdiction
Morgan CreekStream nearby0.6 miles outsideChecked for Corps of Engineers jurisdiction
Brushy CreekStream nearby0.9 miles outsideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

No railroad is mapped inside Tira or within one mile outside its limits, and no street and rail crossing is mapped in town. Vaden Creek runs 0.37 channel miles inside town, and Logston Branch runs 0.16; four mapped street crossings intersect named streams. Wolf Creek is 0.1 miles from the town limits, so routes nearby need their own crossing review. No lake or pond is mapped within one mile.

Who permits a bore on Hopkins County roads near Tira?

Tira is incorporated, so its city streets belong to the city; Farm Road 1536 and Texas State Highway 154 are state routes. Work in their right of way needs a TxDOT utility permit. The utility owner files through RULIS, TxDOT’s online system, with review by the Paris District; we prepare the bore plan and profile for that filing. At a Texas State Highway 154 crossing, cover is at least 60 inches for electric and communication lines and water lines, and 60 inches for pressurized sewer. Vaden Creek crossings are checked for Corps jurisdiction during planning.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Whose lines are already in the ground in Hopkins County near Tira?

The water provider for a specific Tira address must be confirmed with the city, Hopkins County or the local water district before a bore is planned. Electric utilities reporting service in Hopkins County are Oncor Electric Delivery Company, Southwestern Electric Power, Farmers Electric Cooperative and Wood County Electric Cooperative. Those reports do not identify the provider at every address, so we confirm the line owner before planning an electric conduit bore near Farm Road 1536.

Line ownerWhat it isSourceSize
Oncor Electric Delivery Company, Southwestern Electric Power, Farmers Electric Cooperative and Wood County Electric CooperativeElectric utilities reporting service in Hopkins CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put Tira’s median housing year at 1983; 23 percent of homes were built before 1960, 49 percent from 1960 to 1999 and 28 percent in 2000 or later. A replacement route near Texas State Highway 19 may meet existing lines, while a newer service could need a different path. We hydrovac pothole every marked utility along the bore path before drilling near it; paint shows location, not depth.

Coiled black HDPE conduit fitted with a pulling grip staged on a lawn along a completed bore path
Coiled HDPE conduit fitted with a pulling grip, staged on a lawn along a finished bore path.

What is near Tira and Sulphur Springs?

Tira is in Hopkins County, at elevation 447 feet, and covers 1.42 square miles. The town’s ZIP code is 75482. Cooper is 9.4 miles west, and Sulphur Springs is 13.6 miles south; Sulphur Springs is also the county seat and nearest larger city. From the Yukon, Oklahoma main office, the drive to Tira is 264 road miles and about 5.2 hours. Farm Road 1536 and Texas State Highway 154 are local route references when we assess access and mobilization.

Places near Tira

What would we bore near Farm Road 1536 in Tira?

  • Highway crossing: A route beneath Texas State Highway 154 needs planned cover and pits placed beyond the pavement.
  • Water service: A connection near Farm Road 1536 needs the address specific water provider confirmed before the route is set.
  • Fiber drop: Fiber conduit along Texas State Highway 19 can pass below pavement without cutting across the road surface.
  • Creek crossing: A bore near Vaden Creek needs a route beneath the channel and a check for Corps jurisdiction during planning.
  • Utility replacement: Near Farm Road 1536, hydrovac potholes show the depth of marked lines before the drill approaches them.
  • Electric conduit: For a route near Texas State Highway 154, confirm the line owner before planning the conduit bore.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

How do I get a quote for Tira work near Texas State Highway 154?

For a route by Texas State Highway 154, start with its address or a map pin, then tell us what line is going in. Give us the pipe or conduit size and estimated footage. A sketch or plans showing the route toward Farm Road 1536 or Vaden Creek help us check crossings and access before pricing the work.

The 264 road miles from Yukon matter for mobilization, then the ground and route shape the price. Crockett clay can take staged reaming, while a Vaden Creek crossing adds planning for the channel and pit locations. We also look at footage, pipe or conduit size, utilities to expose, pavement or concrete, pit work, backfill, excavator time and whether the route uses Texas State Highway 154 right of way. Emergency timing can change the work plan.

Questions people ask about boring in Tira

Does Trinity Boring Solutions take directional boring jobs in Hopkins County near Tira?

Yes. We take directional boring work along Texas State Highway 154 in Tira and across Texas. Our crews handle the work, including support from satellite yards operated by partner drilling contractors we have vetted. Farm Road 1536 or Vaden Creek can help define the route, and you deal with Trinity from the first call through the bore log.

What do Tira homes in Hopkins County mean for replacement bores?

Tira housing ranges from older homes to newer service needs: the American Community Survey 2019 to 2023 estimates put the median year built at 1983. That does not date a buried line, so we locate and expose marked utilities along the proposed route, including near Texas State Highway 19, before drilling close to them.

Could groundwater or flooding affect a bore pit near Vaden Creek in Tira?

It can affect pit planning. The USDA soil survey maps a seasonal water table within 60 inches in 27 percent of Tira and flood prone soils across 9 percent. Near Vaden Creek, we plan depth beneath the channel, keep pits manageable where water is a concern and check the crossing for Corps jurisdiction.

Does Crockett soil in Tira create a steel corrosion concern, and what pipe is used?

Yes, the USDA soil survey maps high steel corrosion risk across Tira, including areas mapped as Crockett soil. Near Farm Road 1536, we follow the line owner’s selection of any coating for steel casing or tracer wire. HDPE is not affected by the mapped soil corrosion concern, so the chosen material depends on the line design and owner’s requirements.

What ground will a bore pass through in Tira’s Crockett soil?

Crockett is the most common mapped soil series in Tira at 33 percent. About 40 inches below the surface, the survey maps clay in 57 percent of the area and clay loam in 35 percent. Those are mapped soil patterns, not test borings; sticky clay can build on a reamer, so staged reaming helps manage the hole.

Is rock likely on a Tira bore, and how much bedrock is mapped within five feet?

Weathered bedrock is mapped within 60 inches in 34 percent of Tira, with typical bedrock depth at 47 inches. For Crockett soil in Tira, we treat hard bedrock as unmapped within that depth when planning a bore. That does not rule out deeper rock, but the soil survey suggests a route may encounter weathered material rather than hard rock in the upper five feet.

How far is Tira from Yukon, and does Sulphur Springs affect the job?

Tira is 264 road miles, or about a 5.2 hour drive, from our Yukon, Oklahoma main office. Sulphur Springs is 13.6 miles south and is the county seat. The Yukon distance affects mobilization planning, while the actual route near Farm Road 1536 and the ground conditions set the field approach.

How much 811 notice does a Tira bore near Farm Road 1536 need, and what about the marks?

For a bore near Farm Road 1536, Texas811 requires a locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before. For Hopkins County work around Tira, we plan around Texas811’s guidance of at least two working days. If the start slips more than 14 days past the original notice, make a new request; refresh worn or moved marks through Texas811 before work continues.

What affects the cost of directional boring in Tira near Texas State Highway 154?

The route and scope determine the price. We consider the 264 road miles from Yukon, Crockett clay, bore length and pipe or conduit size, plus pavement, utility crossings, potholing, pit and excavator work, backfill, and creek drainage. A route in Texas State Highway 154 right of way also needs its permit plan, which affects the work required.

Where the Tira facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Tira

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Tira, Texas

Type the address of your job in Tira. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Tira

Same county: Cumby. All counties: Texas county list.