Lone Oak Texas Directional Boring: Crockett Soil, US 69 And Bricklin Branch
Quick Answer: Need a line beneath US 69 or Bricklin Branch without opening the surface? We use directional boring, also called horizontal directional drilling (HDD), for crossings in Lone Oak, Hunt County. Lone Oak is 248 road miles from our Yukon, Oklahoma main office, and Olive Street is one local route where a service line may need a buried path. Crockett loam and clay below the surface can cling to tooling, so we manage fluid and ream in stages.
Lone Oak bores at a glance
- Incorporated city in Hunt County, Texas. Population 804 (Census Bureau 2024 estimate).
- Road distance from our Yukon, Oklahoma main office: 248 miles, about 5 hours of driving.
- Ground: Crockett soil is mapped on 57 percent of the area, with clay about 40 inches down.
- Rock: bedrock is mapped within 60 inches on 67 percent of the area.
- Highways inside the boundary: US 69, FM 513, FM 1567 and FM 1571. State permit office: TxDOT Paris District.
- Railroad track inside the boundary: none mapped.
- Named streams inside the boundary: Bricklin Branch, Pecan Branch and Bull Creek.
- Public water: City of Lone Oak, surface water bought from another system.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Who can I call for directional boring in Lone Oak near Bricklin Branch?
Can you get a line beneath US 69 in Lone Oak without cutting the pavement? We plan directional bores for Hunt County, including water or sewer lines along Olive Street and electric conduit or fiber near FM 513. The Census Bureau Vintage 2024 estimate puts Lone Oak at 804 people, so a short service route and a longer utility crossing call for different bore plans.
Our main office is in Yukon, Oklahoma, and Lone Oak work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Since 1982, four decades of boring have taught us to plan for ground that shifts from Crockett loam near the surface to heavy clay below; that affects fluid choice, reaming and pullback timing. Our family business started in 1965, and Trinity has had no utility strike in over 25 years.

How does Crockett soil affect a bore in Lone Oak?
The USDA soil survey maps Crockett soil series across 57% of Lone Oak, with Crockett loam, 1 to 3 percent slopes, covering 48% of the mapped area. Leson clay accounts for 17%, and surface textures include 57% loam and 27% clay. At about 40 inches below the surface, clay is mapped across 97% of the area, with an average clay content of 45%. Crockett, Leson, Wilson, and Ferris are mapped soil patterns in Lone Oak, not test borings we rely on for design. For a bore near Olive Street, sticky clay can build on the reamer and grip the pipe, so the drilling fluid and reaming sequence matter.
| USDA soil survey, inside the Lone Oak city limits | What is mapped |
|---|---|
| Soil series mapped | Crockett 57 percent, Leson 17 percent, Wilson 13 percent, Ferris 10 percent and Hopco 3 percent |
| Texture at the surface | loam 57 percent, clay 27 percent and silt loam 13 percent |
| Texture about 40 inches down | clay 97 percent and silty clay loam 3 percent |
| Engineering class about 40 inches down | fat clay (CH) 89 percent and lean clay (CL) 11 percent |
| Average clay content about 40 inches down | 45 percent |
| Bedrock mapped within 60 inches | 67 percent of the area (0 percent hard rock, 67 percent weathered rock) |
| Seasonal water table within 60 inches | 16 percent of the area |
| Flood prone soils | 3 percent of the area |
| High corrosion risk for uncoated steel | 100 percent of the area |
Weathered bedrock is mapped within 60 inches across 67% of Lone Oak, while hard bedrock is not mapped within that depth. A bore may meet softer shale, siltstone or weathered sandstone, which generally calls for slower drilling than dirt. The USDA soil survey maps a seasonal water table within 60 inches across 16% of the area and flood prone soils across 3%, so Bricklin Branch deserves attention in route planning. High steel corrosion risk is mapped across 100%, a concern for steel casing and tracer wire. The Cenozoic Limonitic Sandy Decomposition Residuum includes clay, sand, sandstone and shale, so ground conditions can change along a bore.
How is a bore run through Lone Oak clay?
Clay at depth is widespread in Lone Oak, so the drilling plan needs to keep the hole workable without pushing fluid against pavement. Near US 69, we adjust the bore to the mapped ground and the surface above it.
- In Crockett clay, we use thinner drilling fluid and polymer, then ream in stages so sticky cuttings do not load up the tooling.
- Because heavy clay lies below much of Lone Oak, we watch fluid returns near US 69 and keep pressure low enough to protect the pavement.
- With weathered bedrock mapped within 60 inches across 67% of the city, we slow down if a bore near FM 513 meets shale or sandstone.
- We track the drill head from the surface and record depth and pitch as the bore advances, including on a route beneath Olive Street.

Which Lone Oak crossings matter near US 69 and Bricklin Branch?
US 69 has 2.8 mapped roadway miles inside Lone Oak, while FM 513 has 1.2, FM 1567 has 0.5 and FM 1571 has 0.3. A bore crossing any of them needs a route laid out against the actual right of way, not just the pavement edge. Among local streets, Gladys Street runs 0.6 miles, Church Street 0.5 and Olive Street 0.45, giving several distinct places to plan a service route.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| US 69 | US highway | 2.8 roadway miles inside | State highway office |
| FM 513 | State highway | 1.2 roadway miles inside | State highway office |
| FM 1567 | State highway | 0.5 roadway miles inside | State highway office |
| FM 1571 | State highway | 0.3 roadway miles inside | State highway office |
| Bricklin Branch | Stream | 0.69 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Pecan Branch | Stream | 0.28 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Bull Creek | Stream | 0.13 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Dunn Creek | Stream nearby | 0.7 miles outside | Checked for Corps of Engineers jurisdiction |
No railroad is mapped inside Lone Oak or within 1 mile outside the city limits, so there is no local track crossing to plan around. Bricklin Branch runs 0.69 channel miles in the city, Pecan Branch 0.28 and Bull Creek 0.13; mapped street crossings of named streams total 3. Within Lone Oak, no lakes or ponds are mapped within 1 mile; we separately check stream crossings such as Bricklin Branch during route planning. A route near Bricklin Branch needs channel and water crossing conditions considered before the bore path is set.
Who approves a Lone Oak bore in Hunt County?
Mill Street is a city street because Lone Oak is incorporated, so coordinate street access with the city. For work in the right of way of US 69, FM 513, FM 1567 or FM 1571, the line owner, not the driller, submits the utility application through TxDOT’s RULIS system. TxDOT’s Paris District reviews it, and we give the line owner the bore plan and profile. Electric and communication crossings need 60 inches of cover below the lowest crossed grade; water crossings need 60 inches, and pressurized sewer crossings need 60 inches. For US 69 in Lone Oak, we follow TxDOT rules calling for boring or tunneling beneath existing highway pavement. A Bricklin Branch crossing is checked for U.S. Army Corps of Engineers jurisdiction during planning.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
Who owns the lines near the City of Lone Oak water system?
The City of Lone Oak public water system uses purchased surface water and serves 867 people through 289 service connections. That gives a bore near Mill Street a local water system to account for, but the line owner at the address still needs to be identified. Utilities reporting electric service in Hunt County include Oncor Electric Delivery Company, Texas-New Mexico Power, City of Greenville, Fannin County Electric Cooperative, Farmers Electric Cooperative and Trinity Valley Electric Cooperative. We confirm the electric line owner before planning a conduit bore.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| City of Lone Oak | Public water system | Surface water bought from another system | 289 connections, 867 people served |
| Oncor Electric Delivery Company, Texas-New Mexico Power, City of Greenville, Fannin County Electric Cooperative, Farmers Electric Cooperative and Trinity Valley Electric Cooperative | Electric utilities reporting service in Hunt County | EIA Form 861 | Confirm the line owner by address |
The American Community Survey 2019 to 2023 five year estimates put Lone Oak’s median housing year at 1999; 15% of homes were built before 1960, 36% from 1960 to 1999 and 49% in 2000 or later. That mix can mean either replacement work or new service routes along Gladys Street. Before drilling near any marked utility, we hydrovac pothole it to expose the line because locate marks show position, not depth; for example, we do this before a bore under Gladys Street approaches a marked line.

How far is Lone Oak from East Tawakoni and our Yukon yard?
Lone Oak is in Hunt County, at an elevation of 556 feet, and covers 1.11 square miles. ZIP code 75453 serves Lone Oak in Hunt County, helping us confirm the service area before underground work. Point is 6.1 miles southeast, and East Tawakoni is 6.1 miles south; West Tawakoni is 8.7 miles southwest. Greenville, the county seat and nearest larger city, is 12.7 miles northwest. The Yukon yard is 248 road miles away, about a 5.0 hour drive, which is part of planning mobilization for a bore on FM 513 or near Bricklin Branch.
Places near Lone Oak
- Directional boring in Point: 6.1 miles southeast
- Directional boring in East Tawakoni: 6.1 miles south
- Directional boring in West Tawakoni: 8.7 miles southwest
- Directional boring in Campbell: 10.5 miles north
- Directional boring in Cumby: 11.3 miles northeast
- Directional boring in Greenville: 12.7 miles northwest
What would we bore near Olive Street in Lone Oak?
- Highway crossing: A bore beneath US 69 needs a planned path below the road surface and room for pits beyond the travel lanes.
- Water service: A new connection near the City of Lone Oak system needs a route that accounts for nearby service lines and the source water network.
- Fiber route: A fiber bore along Olive Street can pass beneath pavement and driveways without cutting the street surface.
- Creek crossing: A line beneath Bricklin Branch needs a path planned for the channel and a check for federal waterway jurisdiction.
- Street connection: A service bore near Gladys Street can avoid open cutting a driveway while connecting a building to a buried utility.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
What should I send for a Lone Oak bore near Mill Street?
For a bore near Mill Street, start with the address or map pin, then tell us what is going underground, such as a water line or fiber. Add the pipe or conduit size and the footage. A sketch or plans help us see whether the route meets Olive Street, US 69 or a drainage crossing.
The job details shape the price in three groups: ground, crossings and logistics. Crockett clay can affect drilling fluid and reaming; a crossing near US 69 or Bricklin Branch adds route and access questions. Pavement, exposed utilities, pits, excavator time and sand backfill can change the work too. Mobilization matters because Lone Oak is 248 road miles from Yukon. High profile or emergency work can also change the plan.
Questions people ask about boring in Lone Oak
Does Trinity Boring Solutions take jobs in Hunt County near Lone Oak?
Yes. We take directional boring work in Lone Oak and across Texas, including jobs in Hunt County. The work uses our crews and satellite yards operated by drilling contractor partners we have vetted. You stay in contact with Trinity from the first call through the bore log, including for a route near Olive Street.
How much rock is mapped within five feet in Lone Oak?
The USDA soil survey maps bedrock within 60 inches across 67% of Lone Oak, mostly as weathered bedrock; hard bedrock is not mapped within that depth. That points to possible slower drilling through weathered shale or sandstone, such as on a route near FM 513, but the map is not a site specific test.
Which office should we contact for approval of a bore under US 69 in Lone Oak, the TxDOT Paris District?
The line owner files the TxDOT utility permit through RULIS for work in the US 69 right of way, and TxDOT’s Paris District reviews it. We prepare the bore plan and profile for the owner’s application on FM 513 in Lone Oak. The same process applies to the state highways running through Lone Oak, including FM 513.
Can you bore a utility line under Bricklin Branch in Lone Oak?
A bore can be planned beneath Bricklin Branch, which runs 0.69 channel miles inside Lone Oak. During planning, we check whether a crossing near Bricklin Branch falls within US Army Corps of Engineers jurisdiction. The route and depth must account for the channel, and mapped stream crossings in the city make the site details important.
Who runs Lone Oak’s water system and where does its water come from?
In Hunt County, the City of Lone Oak owns the public water system, which uses purchased surface water, so we plan nearby crossings around existing water infrastructure. Public records list 289 service connections and 867 people served in Lone Oak, figures we use to account for water infrastructure during underground planning. For a bore near Mill Street, we still need the address and route to identify which buried water lines may be in the way.
Which electric company serves a Lone Oak address in Hunt County?
Utilities reporting service in Hunt County include Oncor Electric Delivery Company, Texas-New Mexico Power, City of Greenville, Fannin County Electric Cooperative, Farmers Electric Cooperative and Trinity Valley Electric Cooperative. The report does not identify the provider at every Olive Street address, so confirm the line owner before setting conduit specifications.
Can I reach Trinity after hours for an urgent Lone Oak bore on Olive Street?
Yes. Call (405) 409-7423; a person answers 24 hours a day. For urgent work near Olive Street, tell us the location, what needs to go underground and whether the route approaches a street, a marked utility or a drainage feature. We provide 24 hour emergency response.
How much notice does Texas811 need for a Lone Oak bore near Gladys Street?
The person arranging the locate for a bore near Gladys Street must contact Texas811 at least 48 hours before excavation starts, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before. If a US 69 crossing start slips more than 14 days past the original notice, we submit a new request. Worn or moved marks need refreshing through Texas811 before work continues.
What affects our cost for a directional bore under US 69 in Lone Oak, including mapped Crockett and Wilson soils?
The scope sets the price: Crockett clay, bore length and pipe size affect the ground work, while US 69 crossings, exposed utilities, pavement and creek routes affect planning and equipment. Pit size, excavator time, sand backfill and mobilization also matter. Lone Oak’s 248 road miles from Yukon can affect mobilization for the job.
Where the Lone Oak facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside Lone Oak
- U.S. Census Bureau, TIGER/Line 2024: Lone Oak boundary, roads, rail lines and streams
- U.S. Census Bureau, Vintage 2024 population estimates: Lone Oak
- U.S. Census Bureau, American Community Survey 2019 to 2023: Lone Oak housing units and year built
- Macrostrat geologic map compilation: map units under Lone Oak
- U.S. EPA Safe Drinking Water Information System: public water systems serving Lone Oak
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving Hunt County
- U.S. Geological Survey, Elevation Point Query Service: Lone Oak elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to Lone Oak
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in Lone Oak
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in Lone Oak, Texas
Type the address of your job in Lone Oak. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
County and State Pages for Lone Oak
Same county: Commerce · Caddo Mills · Royse City · Quinlan · Wolfe City · Poetry · Celeste · Hawk Cove · Union Valley · Neylandville. All counties: Texas county list.
