trinityboringsolutions.com

Brazos Texas Directional Boring: Truce Fine Sandy Loam, FM 129, Palo Pinto Creek

Quick Answer: We take directional boring, also called horizontal directional drilling (HDD), work in Brazos, Texas, including routes beneath FM 129 and Palo Pinto Creek. The Yukon, Oklahoma main office is 264 road miles away, so Water Plant Road access and mobilization matter to a job plan. Truce soil is the largest mapped soil series, and its sandy loam surface gives way to clay at depth that can grip the pipe. We plan around Water Plant Road and the specific route.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Brazos bores at a glance

  • Unincorporated community in Palo Pinto County, Texas. Population 112 (2020 Census count).
  • Road distance from our Yukon, Oklahoma main office: 264 miles, about 5.2 hours of driving.
  • Ground: Truce soil is mapped on 30 percent of the area, with clay about 40 inches down.
  • Rock: bedrock is mapped within 60 inches on 68 percent of the area.
  • Highways inside the boundary: FM 129. State permit office: TxDOT Fort Worth District.
  • Railroad track inside the boundary: Union Pacific, with 1 mapped street and rail crossings.
  • Named streams inside the boundary: Palo Pinto Creek.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who handles directional boring in Brazos near Palo Pinto Creek?

Trinity Boring Solutions takes directional boring work in Brazos, an unincorporated community in Palo Pinto County. The Census Bureau counted 112 residents in 2020; it does not publish yearly estimates for unincorporated places. We install water, sewer, gas, electric conduit and fiber, with routes planned beneath streets such as Chesnut Circle or around Palo Pinto Creek where the route calls for it.

Our main office is in Yukon, Oklahoma, and Brazos work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. We have had no utility strike in over 25 years, a record that matters when a bore route approaches existing lines around FM 129. Our family business began in 1965 and has done directional boring since 1982.

Horizontal directional drill rig set up on an open grass field with support trucks and a vacuum excavation truck
Our horizontal directional drill set up in an open field with the support trucks and the vacuum excavation truck. Photos on this page are from our jobs in Oklahoma and Texas.

What does the soil survey show for Brazos and Truce soil?

Brazos ground is mapped mainly as Truce fine sandy loam, which covers 30 percent of the community, while Thurber clay loam covers 28 percent. At about 40 inches below the surface, the USDA soil survey maps clay across 58 percent of the area and silty clay across 29 percent; average clay content at that depth is 43 percent. These are mapped soil patterns, not test borings. The change from a finer surface to clay below can make the reamer sticky and let clay grip a pipe.

USDA soil survey, inside the Brazos mapped community boundaryWhat is mapped
Soil series mappedTruce 30 percent, Owens 29 percent, Thurber 28 percent, Hensley 7 percent and Santo 4 percent
Texture at the surfacefine sandy loam 34 percent, clay 29 percent and clay loam 28 percent
Texture about 40 inches downclay 58 percent, silty clay 29 percent and bedrock 9 percent
Engineering class about 40 inches downfat clay (CH) 57 percent, lean clay (CL) 30 percent and silty clayey sand (SC SM) 4 percent
Average clay content about 40 inches down43 percent
Bedrock mapped within 60 inches68 percent of the area (7 percent hard rock, 61 percent weathered rock)
Seasonal water table within 60 inches0 percent of the area
Flood prone soils4 percent of the area
High corrosion risk for uncoated steel89 percent of the area

The USDA soil survey maps bedrock within 60 inches across 68 percent of Brazos, including weathered bedrock across 61 percent and hard bedrock across 7 percent. That points to possible slower drilling and a need to watch the soil to rock transition. Seasonal water table is not mapped within 60 inches, while flood prone soils cover 4 percent. High steel corrosion risk is mapped across 89 percent, so the line owner should consider casing and tracer wire materials; HDPE does not have the same soil corrosion concern. The Mingus Formation is Pennsylvanian black shale, another reason a site specific bore plan matters.

How do we drill through clay in Brazos?

For a Brazos bore through clay, we manage drilling fluid and reaming to limit sticky cuttings and pipe grip, especially along a route near Chesnut Circle. The mapped bedrock also calls for checking the actual ground as drilling advances.

  1. In Truce fine sandy loam that turns to clay at depth, we use drilling fluid suited to sticky cuttings and ream in stages to reduce the chance of pipe grip.
  2. With clay mapped at about 40 inches along much of Brazos, we watch fluid returns near FM 129 so pressure does not lift pavement.
  3. Where bedrock is mapped within 60 inches, we check steering at the soil to rock contact and use a hard soil bit for weathered rock.
  4. Along Palo Pinto Creek, we plan depth below the channel and check jurisdiction during planning; pits stay on the banks rather than cutting across them.
Rock bit on the drill rod at the front of a Vermeer D24x40 S3 with broken sandstone at the entry of a rock bore in Guthrie, OK
Rock bit on the drill rod with broken sandstone at the entry of a rock bore in Guthrie, Oklahoma.

What might a Brazos bore cross near FM 129?

A Brazos bore may need to pass beneath FM 129, the state highway with 0.8 mapped roadway miles inside the community boundary. US 281 is 0.8 miles outside that boundary. Water Plant Road is the longest named street at 1.04 miles, followed by Rusk Street at 0.84 miles and Chesnut Circle at 0.51 miles. Houston Street runs 0.29 miles inside the community. A bore can keep pavement and driveways uncut, but the route and access determine pit placement and drilling approach.

CrossingTypeMapped extentWho has a say
FM 129State highway0.8 roadway miles insideState highway office
US 281Highway nearby0.8 miles outsideState highway office
Union PacificRailroad0.77 track miles insideThe railroad
Palo Pinto CreekStream0.45 channel miles insideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

Union Pacific has 0.77 track miles inside Brazos on the Baird Subdivision, and public records map one street and rail crossing. A bore involving that track needs an agreement from Union Pacific, which sets crossing conditions such as casing, depth and flagging. Palo Pinto Creek runs 0.45 channel miles through the community, and one street crossing of a named stream is mapped. Creek work is checked for federal jurisdiction during planning; no lakes or ponds are mapped within one mile.

Do I need a permit for a Brazos bore in Palo Pinto County?

Brazos has no city government, so street authority rests with Palo Pinto County or the state according to the road involved. Work in FM 129 right of way needs a TxDOT utility permit reviewed by the Fort Worth District; the utility owner applies through RULIS, and we prepare the bore plan and profile for its filing. Highway crossing cover is at least 60 inches for electric and communication lines and water lines, and pressurized sewer lines also need 60 inches. A Union Pacific track crossing requires an agreement with the railroad. Palo Pinto Creek is checked for Corps jurisdiction during planning.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Who owns electric and water lines in Palo Pinto County near Brazos?

The water provider for the specific Water Plant Road address has to be confirmed with Palo Pinto County or the local water district before a bore is planned. EPA drinking water records do not tie a provider to Brazos, and no system carries the community name. Oncor Electric Delivery Company, Texas New Mexico Power, Tri County Electric Cooperative and United Electric Cooperative Service report electric service in Palo Pinto County, but the line owner for an address must be confirmed before a conduit bore.

Line ownerWhat it isSourceSize
Oncor Electric Delivery Company, Texas-New Mexico Power, Tri-County Electric Cooperative and United Electric Cooperative ServiceElectric utilities reporting service in Palo Pinto CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The Census Bureau does not publish reliable housing data for a place as small as Brazos, so a Water Plant Road project may involve either a service extension or replacement of an existing line. County precipitation averages 4.2 inches in May and 1.6 inches in January, which can affect ground conditions when planning access and pits. Before drilling near marked lines, we hydrovac pothole them; locate marks show position, not depth, including lines near the electric route or water connection.

Trinity Boring Solutions crew running a 2 inch conduit directional bore with airport hangars and a parked jet in the background in Oklahoma City
Our crew running a 2 inch conduit bore near the hangars at an Oklahoma City airport.

What is near Brazos, including Millsap?

Brazos is an unincorporated community in Palo Pinto County at 824 feet elevation, covering 0.34 square miles within its mapped boundary. Its ZIP code is 76472. Santo is 6.5 miles southwest, Millsap is 8.9 miles northeast, and Lipan is 10.9 miles southeast; Mineral Wells, the nearest larger city, is 11.4 miles north. Palo Pinto, the county seat, is 12.9 miles northwest. The Yukon, Oklahoma main office is 264 road miles away, about a 5.2 hour drive, so distance affects mobilization for Water Plant Road work.

Places near Brazos

What would we bore near Water Plant Road in Brazos?

  • Highway crossing: A route beneath FM 129 uses a bore under the highway pavement, with the utility owner handling the TxDOT permit.
  • Street service: A water or sewer line can pass beneath Water Plant Road without cutting the street surface.
  • Fiber conduit: A conduit route near Houston Street can avoid an open cut across pavement or a driveway.
  • Creek crossing: A route beneath Palo Pinto Creek is planned below the channel and checked for federal jurisdiction.
  • Rail crossing: Work beneath Union Pacific track requires an agreement with the railroad that owns the line.
  • Utility replacement: A route along Chesnut Circle can be pothole checked where marked lines meet the planned bore path.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What should I send for a Brazos quote near Union Pacific?

A map pin matters in Brazos because a route near Union Pacific track or Palo Pinto Creek can change access and crossing requirements. Send the address or pin, what will go in the ground, the pipe or conduit size and the footage. A sketch or plans showing the route near FM 129 or Water Plant Road help us review the scope.

Price follows the job conditions: mobilization starts with the 264 road miles from Yukon, then the Truce soil and possible bedrock affect drilling time. Pipe size, bore length and the number of marked utilities to expose also matter. A route under FM 129, near Union Pacific track or across Palo Pinto Creek adds crossing planning; pavement, pits, excavator time, sand backfill and emergency or high profile work can change the scope.

Questions people ask about boring in Brazos

Does Trinity take Brazos jobs in Palo Pinto County, and who staffs them?

Yes, we take directional boring work in Brazos, Palo Pinto County. Our own crews handle jobs, and partner drilling contractors Trinity has personally vetted may work from satellite yards. You work with Trinity throughout the job, from the first call to the bore log, whether the work is near FM 129 or Palo Pinto Creek.

Which electric company owns a Brazos line in Palo Pinto County?

The electric line owner depends on the address in Brazos, so confirm it before planning conduit work. Oncor Electric Delivery Company, Texas New Mexico Power, Tri County Electric Cooperative and United Electric Cooperative Service report service in Palo Pinto County. Ask the confirmed owner about conduit specifications for a route near Water Plant Road.

Who controls Chesnut Circle in Brazos, and does a bore mean cutting it?

Brazos has no city government, so Chesnut Circle street authority is with Palo Pinto County rather than a city. A directional bore can pass below the street without an open cut through its surface. The route still needs utility checks and suitable space for entry and exit pits.

Does Truce soil in Brazos pose a corrosion concern for steel pipe?

The USDA soil survey maps high steel corrosion risk across 89 percent of Brazos, so the line owner should consider materials for steel casing and tracer wire. Truce soil is the leading mapped soil series. HDPE is not subject to that soil corrosion concern, but the owner selects materials for the line.

What ground should I expect for a Brazos bore in Truce soil?

Truce fine sandy loam covers 30 percent of Brazos, but at about 40 inches the USDA soil survey maps clay across 58 percent and silty clay across 29 percent. Clay can ball on a reamer or grip pipe, so staged reaming and fluid control matter. The mapped pattern is not a test boring.

Will a Brazos bore encounter rock, and how much bedrock is mapped?

Rock may affect a Brazos bore: bedrock is mapped within 60 inches across 68 percent of the community, including weathered bedrock across 61 percent and hard bedrock across 7 percent. A soil to rock transition can change steering and drilling pace, so the plan needs room for ground conditions to vary.

What bore sizes and lengths can Trinity handle near Brazos Houston Street?

For work near Houston Street in Brazos, we handle lines from 3/4 inch service lines to 48 inch casing, with bore lengths from 10 feet to 5,000 feet. The right setup depends on the line, ground and route, including whether nearby streets or marked utilities affect the bore path.

How early should I call Texas811 for a Brazos bore near Water Plant Road?

For a Water Plant Road bore in Brazos, submit a Texas811 locate request at least 48 hours before excavation begins, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days beforehand. If the start slips more than 14 days past the original notice, make a new request; have worn or moved marks refreshed before work continues.

What affects the cost of a Brazos directional bore near FM 129?

A Brazos bore near FM 129 is priced around its job scope, not one fixed factor. Length, pipe size, Truce soil and possible bedrock, marked utility crossings, pavement, creek work and pits all affect the work. The 264 road miles from Yukon also affect mobilization, as can emergency timing or high profile requirements.

Where the Brazos facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Brazos

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Brazos, Texas

Type the address of your job in Brazos. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Brazos

Same county: Graford · Strawn · Gordon · Palo Pinto · Mingus. All counties: Texas county list.