trinityboringsolutions.com

Cool Texas Directional Boring: Bonti Soil, US 180 and Dry Creek

Quick Answer: Before a bore near US 180, confirm the water provider for the address with the city, county or local water district; Oncor Electric Delivery Company reports service in Parker County, but the line owner must be checked. Trinity Boring Solutions does directional boring, also called horizontal directional drilling (HDD), for routes along US 180 and FM 113 in Cool, Texas. Cool is 236 road miles from our Yukon yard, so a route by Holders Chapel Road figures into mobilization planning. USDA mapping shows Bonti soil across 29 percent of Cool, and bedrock is typical at 36 inches, so staged reaming and careful steering matter.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Cool bores at a glance

  • Incorporated city in Parker County, Texas. Population 233 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 236 miles, about 5 hours of driving.
  • Ground: Bonti soil is mapped on 29 percent of the area, with bedrock about 40 inches down.
  • Rock: bedrock is mapped within 60 inches on 75 percent of the area.
  • Highways inside the boundary: US 180 and FM 113. State permit office: TxDOT Fort Worth District.
  • Railroad track inside the boundary: none mapped.
  • Named streams inside the boundary: Dry Creek.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Which contractor handles directional boring along US 180 in Cool?

For directional boring in Cool, confirm the water provider and electric line owner before planning a route along US 180; Trinity Boring Solutions takes work in Parker County. The Census Bureau Vintage 2024 estimate puts Cool at 233 residents. We install water, sewer, gas, electric conduit and fiber, including routes serving properties along US 180, FM 113 and Holders Chapel Road.

Our main office is in Yukon, Oklahoma, and Cool work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our family business began in 1965 and has done directional boring since 1982; for a Holders Chapel Road crossing, we plan around site conditions. With electric lines and water services already running near US 180, our record of no utility strike in over 25 years is especially relevant to careful route planning.

Aerial view of a bore pit with drill rig and conduit alongside a directional drill rig and conduit on a concrete lot
Our crew at a bore pit beside the directional drill on a conduit job, seen from above. Photos on this page are from our jobs in Oklahoma and Texas.

How does Bonti soil affect a bore in Cool?

The USDA soil survey maps Bonti as the leading soil series in Cool, at 29 percent of the town, with Shatruce at 16 percent and Chaney at 13 percent. Fine sandy loam is the most common surface texture, mapped across 38 percent. At about 40 inches below the surface, bedrock is mapped across 29 percent, clay across 26 percent and sandy clay across 13 percent. Average clay content at that depth is 38 percent. That sticky ground can ball up on a reamer, so we plan fluid and reaming stages around the route.

USDA soil survey, inside the Cool city limitsWhat is mapped
Soil series mappedBonti 29 percent, Shatruce 16 percent, Chaney 13 percent, Owens 11 percent and Santo 10 percent
Texture at the surfacefine sandy loam 38 percent, stony fine sandy loam 17 percent and gravelly sandy loam 16 percent
Texture about 40 inches downbedrock 29 percent, clay 26 percent and sandy clay 13 percent
Engineering class about 40 inches downlean clay (CL) 45 percent, fat clay (CH) 14 percent and silty clayey sand (SC SM) 10 percent
Average clay content about 40 inches down38 percent
Bedrock mapped within 60 inches75 percent of the area (0 percent hard rock, 75 percent weathered rock)
Seasonal water table within 60 inches2 percent of the area
Flood prone soils20 percent of the area
High corrosion risk for uncoated steel61 percent of the area

The USDA soil survey maps bedrock within 60 inches across 75 percent of Cool, typically at 36 inches, and identifies weathered bedrock rather than hard bedrock in that area. The Brazos River Formation is mapped here; its Pennsylvanian rocks include sandstone, conglomerate and mudstone, which can slow drilling where encountered. Seasonal water tables are mapped within 60 inches across 2 percent, while flood prone soils cover 20 percent. We account for the high steel corrosion risk mapped across 61 percent when selecting casing and tracer wire for bores through Bonti soils.

How do crews handle bedrock in Cool?

We bore Cool ground with staged reaming and controlled fluid, because Bonti and Shatruce soils sit over mapped bedrock in many areas near US 180.

  1. Where Bonti soil is sticky, we adjust the drilling fluid and open the hole in stages so clay does not build up on the reamer or grip the pipe.
  2. With bedrock mapped at about 36 inches in Cool, we check depth and pitch as the drill advances, especially where soil meets the Brazos River Formation.
  3. Before drilling near US 180 or My Lane, we hydrovac each marked utility on the path; surface paint shows position, not burial depth.
  4. At Dry Creek, we plan a bore beneath the channel rather than cut the bank, and check whether the crossing falls under Corps jurisdiction.
Rod box on the Vermeer D24x40 S3 Navigator with the bore path heading toward the trees on a rock bore in Guthrie, OK
Rod box on our Vermeer D24x40 with the bore path heading toward the trees on a rock bore in Guthrie, Oklahoma.

What does a bore have to cross in Cool near Holders Chapel Road?

A bore in Cool may need to pass beneath US 180 or FM 113, both mapped inside the town, so the route and required cover depend on which right of way it enters. Holders Chapel Road is the longest named street mapped here, followed by My Lane and Ray Lane. Kyle Lane and Maddux Road are also named streets in Cool. Boring beneath pavement can keep these surfaces uncut, but a highway route needs the applicable TxDOT permit and profile.

CrossingTypeMapped extentWho has a say
US 180US highway5.7 roadway miles insideState highway office
FM 113State highway0.8 roadway miles insideState highway office
Dry CreekStream1.78 channel miles insideChecked for Corps of Engineers jurisdiction
Patterson BranchStream nearbyAlong the boundaryChecked for Corps of Engineers jurisdiction
Duke Mountain BranchStream nearby0.1 miles outsideChecked for Corps of Engineers jurisdiction
Rock CreekStream nearby0.4 miles outsideChecked for Corps of Engineers jurisdiction
Grassy BranchStream nearby0.9 miles outsideChecked for Corps of Engineers jurisdiction
Lake Mineral WellsLake or pond401 acres, nearbyChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

No railroad is mapped inside Cool or within one mile outside its limits, so there is no local track crossing to plan around. Dry Creek runs 1.78 channel miles through town, and one street crossing of a named stream is mapped. Lake Mineral Wells is within one mile but outside the town limits. A planned bore under Dry Creek needs a check for U.S. Army Corps of Engineers jurisdiction.

Do I need a permit to bore in Parker County near US 180 in Cool?

A bore in Cool city streets is under the city, while work within the US 180 or FM 113 right of way needs a TxDOT utility permit. TxDOT’s Fort Worth District reviews the highway application, and the utility owner, not our crew, files it through RULIS. We prepare the bore plan and profile for the owner’s application and work under the permit issued to that owner. TxDOT cover requirements vary by line type, and the district may set a different depth in the permit. A Dry Creek route is also checked for Corps jurisdiction during planning.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Which utilities own lines in Parker County near Cool?

The water provider for a specific Cool address must be confirmed with the city, Parker County or the local water district before a bore is planned. Electric service reported in Parker County includes Oncor Electric Delivery Company, Weatherford Municipal Utility System, Tri County Electric Cooperative and Wise Electric Cooperative. Those reports do not identify which company serves each Cool address, so we confirm the electric line owner before planning conduit near US 180 or Holders Chapel Road.

Line ownerWhat it isSourceSize
Oncor Electric Delivery Company, Weatherford Municipal Utility System, Tri-County Electric Cooperative and Wise Electric CooperativeElectric utilities reporting service in Parker CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

We treat Cool’s median housing year, 1987 in the American Community Survey 2019 to 2023 five year estimates, as background rather than a bore condition in fine sandy loam. The estimates say 16 percent of homes were built before 1960, 53 percent from 1960 to 1999 and 31 percent in 2000 or later. That mix can mean a route replaces an older line or serves newer construction along My Lane. Before drilling near a marked water or electric line, we hydrovac pothole it to find its depth; paint alone does not show depth.

Reel of yellow polyethylene gas pipe on a trailer staged for a directional bore
A reel of yellow polyethylene gas pipe on a trailer, staged for a directional bore.

Where is Cool in relation to Millsap and nearby towns?

Cool is an incorporated city in Parker County, at an elevation of 930 feet and covering 1.65 square miles. We record Cool’s ZIP codes as 76088 and 76066 and check roadway permit needs with the TxDOT Fort Worth District. Garner is 2.5 miles northeast, and Millsap is 3.3 miles south. Mineral Wells, the nearest larger city, is 4.2 miles northwest; Weatherford, the county seat, is 14.3 miles east. From our Yukon, Oklahoma main office, Cool is 236 road miles and a 5.0 hour drive, which is part of planning mobilization for work near US 180.

Places near Cool

What kinds of bores come up near My Lane in Cool?

  • Highway crossing: A route beneath US 180 needs a bore plan that accounts for highway right of way, pavement and the applicable TxDOT permit.
  • Water service: A new service near My Lane needs the address water provider confirmed before we plan where to connect and pothole.
  • Fiber conduit: A fiber route along Holders Chapel Road can be bored beneath pavement while marked utilities are exposed ahead of the drill.
  • Creek crossing: A route beneath Dry Creek needs depth planning around the channel and a jurisdiction check during planning.
  • Electric conduit: Before a conduit bore near FM 113, we confirm which reported Parker County electric utility owns the line at that address.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What do you need to quote a Cool bore near Dry Creek?

A map pin matters near Dry Creek because the exact crossing spot changes the route and access plan. For a Cool quote, send the address or pin, what will go underground, the pipe or conduit size and the footage. A sketch or plans help us see how the route relates to Dry Creek, US 180 or Holders Chapel Road.

The price depends on the route details, not just footage. In Cool, soil and rock conditions matter because bedrock is typically mapped at 36 inches and high clay content can change reaming. The number of utilities to expose, pavement along US 180, and any Dry Creek crossing also affect the work. Pipe size, pit and excavator needs, backfill, emergency timing and mobilization from Yukon all shape the scope.

Questions people ask about boring in Cool

Does Trinity take directional boring jobs in Parker County near Cool, and who staffs them?

Yes, we take directional boring work in Cool and elsewhere in Parker County. Our Yukon crews or crews working from partner contractor satellite yards handle the job, while you work with Trinity from the first call through the bore log. For a route near US 180, we confirm the site and line owners before setting the plan.

Does Bonti soil in Cool create a corrosion concern, and what pipe can be used?

The USDA soil survey maps high steel corrosion risk across 61 percent of Cool, including areas with Bonti soil. The line owner decides whether steel casing or tracer wire needs a protective coating. HDPE is not affected by soil corrosion, but the right pipe depends on the line design and what the owner approves for the route near US 180.

What ground does a bore go through in Cool where Bonti soil is mapped?

Bonti is mapped across 29 percent of Cool, and the USDA soil survey shows fine sandy loam at the surface across 38 percent. About 40 inches down, bedrock is mapped across 29 percent and clay across 26 percent. These are mapped soil patterns, not test borings, so we plan for changing conditions along the specific Holders Chapel Road route.

Will a bore in Cool encounter rock, and how much is mapped in the top five feet?

The USDA soil survey maps bedrock within five feet across 75 percent of Cool, with typical depth at 36 inches. It maps weathered bedrock across that area, while hard bedrock is not mapped within 60 inches. The Brazos River Formation includes sandstone, conglomerate and mudstone, so a route near Dry Creek may still need to account for rock conditions.

Who approves a bore under US 180 in Cool, and which TxDOT office reviews it?

TxDOT’s Fort Worth District reviews a utility permit for work in the US 180 right of way in Cool. The utility owner files the application through RULIS, while we prepare the bore plan and profile and work under that owner’s permit. The required cover depends on the type of line and the permit conditions.

Can a line be bored under Dry Creek in Cool?

A line can be planned beneath Dry Creek without cutting the channel, but the route needs review for U.S. Army Corps of Engineers jurisdiction. Dry Creek runs 1.78 channel miles through Cool, and mapped flood prone soils cover 20 percent of the town. The crossing plan needs to account for the channel and the ground along its banks.

Does Trinity cover Garner, Millsap and rural sites outside Cool?

Yes, we take work across Texas, including Cool, nearby Garner and Millsap, and rural sites outside town limits. Garner is 2.5 miles northeast of Cool, while Millsap is 3.3 miles south. For an address along US 180 or a rural route, send its location so we can assess the work and mobilization.

How much Texas811 notice is needed for a bore near Holders Chapel Road in Cool?

For work near Holders Chapel Road, submit a Texas811 locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays. The request cannot be made more than 14 days before excavation. If the start slips more than 14 days past the original notice, make a new request; worn or moved marks must be refreshed before work continues.

How do we plan a directional bore under US 180 in Cool’s fine sandy loam?

The route, length and pipe or conduit size set the scope, along with ground conditions, utility crossings and pavement. Near US 180, highway requirements may affect the plan; near Dry Creek, the crossing and pits can add work. The distance of 236 road miles from our Yukon yard also affects mobilization, as can excavator time, backfill and emergency scheduling.

Where the Cool facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Cool

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Cool, Texas

Type the address of your job in Cool. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Cool

Same county: Weatherford · Willow Park · Aledo · Briar · Springtown · Reno · Annetta · Azle · Hudson Oaks · Fort Worth · Western Lake · Dennis. All counties: Texas county list.