trinityboringsolutions.com

New Summerfield Texas Directional Boring: Nacogdoches Soil, US 79 and Caney Creek

Quick Answer: Can we put your line under US 79 or near Caney Creek without cutting the surface? Trinity Boring Solutions handles directional boring, also called horizontal directional drilling (HDD), in New Summerfield, Texas, for those local routes. New Summerfield is 340 road miles from our Yukon, Oklahoma main office, and Stallings Road is one local street that may shape access. The USDA soil survey maps Nacogdoches fine sandy loam here and clay at about 40 inches, so a bore may move from sandy upper soil into stickier ground.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

New Summerfield bores at a glance

  • Incorporated city in Cherokee County, Texas. Population 906 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 340 miles, about 6.8 hours of driving.
  • Ground: Nacogdoches soil is mapped on 23 percent of the area, with clay about 40 inches down.
  • Rock: bedrock is mapped within 60 inches on 6 percent of the area.
  • Highways inside the boundary: US 79, Texas State Highway 110 and FM 235. State permit office: TxDOT Tyler District.
  • Railroad track inside the boundary: none mapped.
  • Public water: City of New Summerfield, groundwater wells.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who can I call to bore near Caney Creek in New Summerfield?

Can we install your line beneath US 79 or a New Summerfield street without opening the surface? We take directional boring work across New Summerfield in Cherokee County, where the Census Bureau Vintage 2024 estimate puts the population at 906. Along routes such as Stallings Road, we install water, sewer, gas, electric conduit and fiber lines by boring beneath the surface.

Our main office is in Yukon, Oklahoma, and New Summerfield work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our family business began in 1965, and we have drilled directionally since 1982. That experience helps us plan for the sandy surface soils and deeper clay mapped around New Summerfield roads.

Trinity Boring Solutions branded compact directional drilling unit positioned beside a tree on a red dirt jobsite
Our compact directional drill set up beside a tree on a tight site. Photos on this page are from our jobs in Oklahoma and Texas.

What should we expect from Nacogdoches soil in New Summerfield?

The USDA soil survey maps Nacogdoches soil across 23% of New Summerfield, with Elrose at 16%, Lilbert at 15%, Sacul at 14% and Darco at 10%. Fine sandy loam is mapped across 70% of the city and loamy fine sand across 28%. At about 40 inches, clay is mapped across 43% of the area and sandy clay loam across 33%. The mapped average clay content at that depth is 34%, and heavy clay is mapped across 51%. These are regional soil patterns, not a log of your exact bore, so the route and field conditions matter.

USDA soil survey, inside the New Summerfield city limitsWhat is mapped
Soil series mappedNacogdoches 23 percent, Elrose 16 percent, Lilbert 15 percent, Sacul 14 percent and Darco 10 percent
Texture at the surfacefine sandy loam 70 percent and loamy fine sand 28 percent
Texture about 40 inches downclay 43 percent, sandy clay loam 33 percent and loamy fine sand 12 percent
Engineering class about 40 inches downfat clay (CH) 39 percent, clayey sand (SC) 27 percent and lean clay (CL) 19 percent
Average clay content about 40 inches down34 percent
Bedrock mapped within 60 inches6 percent of the area (0 percent hard rock, 6 percent weathered rock)
Seasonal water table within 60 inches28 percent of the area
Flood prone soils2 percent of the area
High corrosion risk for uncoated steel51 percent of the area

The USDA soil survey maps bedrock within 60 inches in 6% of New Summerfield, all weathered; hard bedrock is not mapped at that depth. Typical bedrock depth is 37 inches, so the plan should allow for changing conditions. A seasonal water table is mapped within 60 inches across 28%, while flood prone soils cover 2%. High steel corrosion risk is mapped across 51%, making the line owner’s coating choice relevant for steel casing or tracer wire; HDPE avoids that soil corrosion concern. The geologic map includes Quartz Sand Decomposition Residuum of Cenozoic age and Queen City Sand of Eocene age.

How do we bore through New Summerfield clay?

With fine sandy loam over clay in the New Summerfield soil survey, we plan for both ground types. The path, marked utilities and nearby pavement help set the drilling approach along streets such as Stallings Road.

  1. Where New Summerfield’s fine sandy loam gives way to clay, we adjust the drilling fluid and ream in stages to manage sticky cuttings.
  2. With heavy clay mapped across 51% of the area at about 40 inches, we watch fluid returns near pavement so pressure does not lift the surface.
  3. Where the mapped sandy soils extend along a route such as Stallings Road, we use staged reaming and have the pipe ready before the final pass.
  4. For a path near Caney Creek or a seasonal water table area, we plan pits for possible water, pothole marked utilities and track depth and pitch from the surface.
Drilling fluid returns at the entry as the Vermeer D24x40 S3 drills a 385 foot sandstone rock bore in Guthrie, Oklahoma
Drilling fluid coming back to the entry pit as our Vermeer D24x40 drills a 385 foot bore in Guthrie, Oklahoma.

Which roads or creeks can a New Summerfield bore cross near US 79?

US 79 runs 3.9 mapped roadway miles inside New Summerfield; Texas State Highway 110 has 1.2 miles and FM 235 has 0.7 miles. A line beneath one of those routes can be installed by boring rather than cutting through the pavement. The city has 15.18 public road centerline miles. Stallings Road is its longest named street at 0.74 miles, followed by Penny Lane at 0.52 miles and Jennings Road at 0.44 miles. Those routes help identify the access and crossing points to show on a plan.

CrossingTypeMapped extentWho has a say
US 79US highway3.9 roadway miles insideState highway office
Texas State Highway 110State highway1.2 roadway miles insideState highway office
FM 235State highway0.7 roadway miles insideState highway office
Caney CreekStream nearbyAlong the boundaryChecked for Corps of Engineers jurisdiction
Bend About CreekStream nearby0.5 miles outsideChecked for Corps of Engineers jurisdiction
Mud CreekStream nearby0.7 miles outsideChecked for Corps of Engineers jurisdiction
Bridge CreekStream nearby0.8 miles outsideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

No railroad is mapped inside New Summerfield or within one mile of its limits, so a track crossing is not part of the mapped local picture. No named stream runs inside the city, and no mapped street crossing of a named stream lies within the limits. Caney Creek runs along or touches the boundary; Bend About Creek is 0.5 miles away. The map also records 2.25 miles of unnamed drainage inside the city. No lakes or ponds are mapped within one mile, so we check nearby Caney Creek when planning underground routes.

Who approves a New Summerfield bore in Cherokee County?

New Summerfield is incorporated, so its city streets belong to the city; no city department, form or fee is specified here. For work in the right of way of US 79, Texas State Highway 110 or FM 235, the line owner, not the driller, submits the utility permit application through TxDOT’s online RULIS system. The TxDOT Tyler District reviews it. We give the line owner the bore plan and profile, then work under the permit issued to that owner. TxDOT cover rules call for 60 inches at highway crossings for electric and communication lines and water lines; the permit can set a different depth. Highway pavement work is bored or tunneled, with rural highway bores extending beneath all travel lanes.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Who owns water and electric service in the City of New Summerfield?

The City of New Summerfield public water system uses groundwater wells and reports 528 service connections serving 906 people. That makes its water lines a key part of planning a bore along New Summerfield streets. Oncor Electric Delivery Company, Cherokee County Electric Cooperative Association and Houston County Electric Cooperative report electric service in the county, but the line owner must be confirmed for the specific address before a conduit bore. Hydrovac potholing can expose marked water or electric lines before drilling near them.

Line ownerWhat it isSourceSize
City of New SummerfieldPublic water systemGroundwater wells528 connections, 906 people served
Oncor Electric Delivery Company, Cherokee County Electric Cooperative Association and Houston County Electric CooperativeElectric utilities reporting service in Cherokee CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The 2019 to 2023 estimates put New Summerfield’s median housing year at 1983, so we verify existing utility locations before boring. The estimates show 24% of homes built before 1960 and 22% built in 2000 or later. Along streets such as Penny Lane, a bore may serve a newer connection or replace older buried pipe. We hydrovac marked utilities on the planned path before drilling near them, since surface marks show position but not depth.

Trinity Boring Solutions technician hydrovac daylighting along a commercial curbline during utility locating in Oklahoma City
Hydrovac daylighting along a commercial curb line in Oklahoma City to find the utilities before a bore.

What is near New Summerfield and Jacksonville?

New Summerfield is in Cherokee County, at an elevation of 454 feet, and covers 4.7 square miles. We use ZIP codes 75766 and 75780 to confirm the New Summerfield service address before planning an underground route. Jacksonville is 9.0 miles west and is the nearest larger city; Gallatin is 6.2 miles south, and Reklaw is 11.1 miles southeast. Rusk, the county seat, is 12.8 miles south. Our Yukon, Oklahoma main office is 340 road miles away, a drive of 6.8 hours. That distance is part of planning mobilization for work along US 79 or a New Summerfield street.

Places near New Summerfield

What could we bore near Stallings Road in New Summerfield?

  • Highway crossing: A bore beneath US 79 can carry water, sewer or conduit under the pavement without cutting through the roadway.
  • Water service: A connection near the City of New Summerfield system can be routed beneath a street after the existing water line is exposed.
  • Fiber drop: A fiber conduit along Stallings Road can be bored below driveways and pavement rather than opened by trenching.
  • Creek crossing: A proposed route near Caney Creek can pass below the channel, with the crossing checked for federal waterway jurisdiction during planning.
  • Electric conduit: A route near Penny Lane needs the serving electric line owner identified before the conduit path and marked utilities are checked.
  • Drainage bore: A route near the 2.25 miles of unnamed drainage mapped in New Summerfield can be planned to keep the channel surface intact.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What should I send to price a New Summerfield bore near Tipton Lane?

Start with a map pin or address, since a spot near Tipton Lane can have different access or crossings from one near US 79 or Caney Creek. For a US 79 crossing, we need the planned material, pipe or conduit size, and footage before mapping the bore. A sketch or plans help us see the proposed route and the utilities it may meet.

The 340 road miles from Yukon shape mobilization for a New Summerfield job. The Nacogdoches soil and clay mapped below the surface can affect drilling and reaming. We also look at bore length, pipe size, utilities to expose, pavement, creek or drainage crossings, pits, excavator time and sand backfill. A route under US 79 or near Caney Creek needs its own crossing details, while an emergency or high profile job can add planning demands.

Questions people ask about boring in New Summerfield

Does Trinity Boring Solutions take directional boring work in New Summerfield and Cherokee County?

Yes. We take directional boring work in New Summerfield, Cherokee County, using our own crews and partner drilling contractors we have vetted. You work directly with Trinity through the bore log, regardless of which crew is on site. We can discuss a route beneath US 79, Stallings Road or another local feature.

Does Nacogdoches soil in New Summerfield pose a corrosion concern for steel pipe?

The USDA soil survey maps high steel corrosion risk across 51% of New Summerfield, so steel casing and tracer wire need the line owner’s coating decision. HDPE is not affected by that soil corrosion concern on routes near FM 235 in New Summerfield. Nacogdoches soil is mapped across 23% of the city, but a site specific review is needed for the proposed route.

What ground will a New Summerfield bore meet around Nacogdoches soil?

The USDA soil survey maps fine sandy loam across 70% of New Summerfield and loamy fine sand across 28%. At about 40 inches, clay is mapped across 43% and sandy clay loam across 33%. The mapped Nacogdoches series covers 23% of the city. These patterns guide planning but do not describe the exact soil at a particular point on Stallings Road.

Is there rock near the surface on a New Summerfield bore route?

The USDA soil survey maps bedrock within 60 inches in 6% of New Summerfield, and that mapped bedrock is weathered; hard bedrock is not mapped at that depth. Typical bedrock depth is 37 inches. Those figures do not rule out deeper rock, so conditions on a proposed route near US 79 still need to be considered.

Who approves a New Summerfield bore beneath US 79?

For work in the US 79 right of way, the utility line owner files through TxDOT’s RULIS system, and the TxDOT Tyler District reviews the permit. We provide the bore plan and profile to the owner and work under its permit. TxDOT cover requirements depend on line type and can be adjusted by the district permit.

Can a New Summerfield line be bored under Caney Creek?

A bore beneath Caney Creek can be considered, since the creek runs along or touches New Summerfield’s boundary. The route must account for channel depth and the ground at the crossing. During planning, the crossing is checked for U.S. Army Corps of Engineers jurisdiction, and the creek bank can remain uncut by a bore.

Does the distance from Jacksonville change a New Summerfield boring job?

Jacksonville is 9.0 miles west of New Summerfield, while our Yukon, Oklahoma main office is 340 road miles away, a drive of 6.8 hours. That distance can affect mobilization for a route near US 79 or a city street. The line length, ground, crossings and equipment needs also shape the job.

How far ahead should I call Texas811 for a New Summerfield bore on Stallings Road?

For a bore along Stallings Road, Texas811 needs the locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before it. If the start moves more than 14 days beyond the original notice, make a new request. Near Tipton Lane, we refresh worn or moved marks through Texas811 before boring continues.

What affects the cost of a New Summerfield bore under US 79?

The scope sets the price for a US 79 crossing. We consider length, pipe or conduit size, New Summerfield’s soil and rock conditions, and how many utilities need exposure. Pavement, creek or drainage crossings, pits, excavator time, sand backfill and emergency or high profile work can also change the requirements. Mobilization from Yukon is another part of the job.

Where the New Summerfield facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in New Summerfield

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in New Summerfield, Texas

Type the address of your job in New Summerfield. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for New Summerfield

Same county: Shadybrook · Alto · Wells · Bullard · Cuney. All counties: Texas county list.